aboutsummaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAge
...
* kernel: 6.1: add bcm27xx video symbolsÁlvaro Fernández Rojas2024-02-05
| | | | | | Add missing Raspberry Pi video symbols. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* qualcommax: enable PHYLIB LED supportRobert Marko2024-02-05
| | | | | | | | CONFIG_PHYLIB_LEDS is required in order for phylib to probe the DT for LEDs attached to PHY-s. Fixes: 75ad5c2 ("qualcommax: switch to qca8081 upstream PHY driver") Signed-off-by: Robert Marko <robimarko@gmail.com>
* realtek: fix zyxel-vers usage for XGS1250-12Stijn Segers2024-02-04
| | | | | | | | | | | Commit daefc646e6d4 ("realtek: fix ZyXEL initramfs image generation") fixed a shell expansion issue with zyxel-vers usage. Commit 045baca10b15 ("realtek: deduplicate GS1900 recipes") took care of this for the rtl838x and rtl839x subtargets, but the single device officially supported in rtl930x - the XGS1250-12 - was overlooked. This commit updates the XGS1250-12 build recipe as well. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* generic: 6.1: add even more missing Kconfig for video-coreChristian Marangi2024-02-04
| | | | | | | | Add even more missing Kconfig for video-core introduced by recent fixup to video kmods. Fixes: 76b0d24157f2 ("kernel: modules: video: fix video-core for 6.1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add patch fixing bugs with LED netdev triggerChristian Marangi2024-02-04
| | | | | | | | | Backport one patch merged upstream that prevent a deadlock for LED netdev trigger and add a pending patch that fix kernel panic on interface rename trigger notification with invalid dev. Fixes: #14477 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add missing Kconfig for video-coreChristian Marangi2024-02-03
| | | | | | | | Add missing Kconfig for video-core introduced by recent fixup to video kmods. Fixes: 76b0d24157f2 ("kernel: modules: video: fix video-core for 6.1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: replace ipq40xx MDIO patch with upstream versionChristian Marangi2024-02-03
| | | | | | | Replace ipq40xx MDIO patch with upstream version now that the driver part got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport LED fixes for qca808x PHYChristian Marangi2024-02-03
| | | | | | Backport LED fixes for qca808x PHY to restore correct functionality. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* broadcom-wl: remove packageFelix Fietkau2024-02-03
| | | | | | | Also remove remaining wireless extension support, since this package was the only in-tree user of it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* malta: Remove kernel 5.15 configurationHauke Mehrtens2024-02-03
| | | | | | | Malta is using kernel 6.1 by default now, remove configuration for kernel 5.15. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* malta: Use kernel 6.1 by defaultHauke Mehrtens2024-02-03
| | | | | | All 4 subtargets are compiling fine and booting up in qemu. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: modules: video: fix video-core for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 wraps core video drivers in a MEDIA_PLATFORM_DRIVERS submenu. Enable that for 6.1 and add some new necessary undefines to target/linux/generic/config-6.1 to avoid build failures. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: 6.1: refresh remaining patchesLech Perczak2024-02-02
| | | | | | Only the Apalis Ixora actually required manual touchups. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* imx: add 6.1 kernel as testingTim Harvey2024-02-02
| | | | | | allow to test 6.1 kernel for imx Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: 6.1: refresh kernel configTim Harvey2024-02-02
| | | | | | | done via 'make kernel_oldconfig' followed by adding missing symbols required for 6.1 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: copy config from 5.15 to 6.1Tim Harvey2024-02-02
| | | | | | Copy the 5.15 config to 6.1 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: copy patches 5.15 to 6.1Tim Harvey2024-02-02
| | | | | | | copy 5.15 patches excluding some that need manual rework touching non-upstream led props. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* lantiq: add support for AVM Fritzbox 3490Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 3490 device. It contains two SoCs, one Lantiq with a 5GHz WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module which is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem - Without telephony or ISDN Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: add support for AVM Fritzbox 5490/5491Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 5490/5491 devices. They contain two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module which is not supported with this commit. Both devices have fiber WAN ports. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port Lantiq gswip switch, 4x 1000/100/10 port (additional qca8334 switch for 2 ports), Port 5 is fixed and connected to the Wireless SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - AT 8033 based AON fiber port (5490) or GPON fiber port (5491) Unsupported: - DECT and ISDN telephony - Two ethernet ports (on extra switch) and fiber port not working Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: add support for AVM Fritzbox 7490Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 7490 device. It contains two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module and is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem Unsupported: - DECT and ISDN telephony Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: add pcie endianess switch for slave devicesDaniel Kestrel2024-02-02
| | | | | | | | | | | The Fritzbox 3490, 5490 and 7490 devices have a Renesas µPD720202 USB3 PCIe device, which requires an endian switch for PCIe slave devices. The flag and setting is not implemented in the available patches. Since adding this setting would break other devices, a DTB setting lantiq,switch-pcie-endianess is added for selective enablement. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* qualcommax: enable back QCA808X PHY driverChristian Marangi2024-02-02
| | | | | | | | | Commit 997acc7f86ca ("generic: 6.1: backport at803x split patches") didn't enable back QCA808x PHY driver after the introduction of the at803x driver split. Fixes: 997acc7f86ca ("generic: 6.1: backport at803x split patches") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: add Comfast CF-E393AX supportDavid Bentham2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Comfast CF-E393AX is a dual-band Wi-Fi 6 POE ceiling mount access point. Oem firmware is a custom openwrt 21.02 snapshot version. We can gain access via ssh once we remove the root password. Hardware specification: SoC: MediaTek MT7981A 2x A53 Flash: 128 MB SPI-NAND RAM: 256MB DDR3 Ethernet: 1x 10/100/1000 Mbps built-in PHY (WAN) 1x 10/100/1000/2500 Mbps MaxLinear GPY211C (LAN) Switch: MediaTek MT7531AE WiFi: MediaTek MT7976D LEDS: 1x (Red, Blue and Green) Button: Reset UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | VCC GND TX RX | <= | | ----------------- | -------------------------- Gain SSH access: 1. Login into web interface (http://apipaddress/computer/login.html), and download the configuration(http://apipaddress/computer/config.html). 2. Rename downloaded backup config - 'backup.file to backup.tar.gz', Enter 'fakeroot' command then decompress the configuration: tar -zxf backup.tar.gz 3. Edit 'etc/shadow', update (remove) root password: With password = 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' to Without password = 'root::0:99999:7:::' 'root::0:99999:7:::' 4. Repack 'etc' directory back to a new backup file: tar -zcf backup-ssh.tar.gz etc/ 5. Rename new config tar.gz file to 'backup-ssh.file' Exit fakeroot - 'exit' 6. Upload new configuration via web interface, now you can SSH with the following: 'ssh -vv -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa root@192.168.10.1'. Backup the mtd partitions - https://openwrt.org/docs/guide-user/installation/generic.backup 7. Copy openwrt factory firmware to the tmp folder to install via ssh: 'scp -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa \ *-mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin \ root@192.168.10.1:/tmp/' 'sysupgrade -n -F \ /tmp/*--mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin' 8. Once led has stopped flashing - Connect via ssh with the default openwrt ip address - 'ssh root@192.168.1.1' 9. SSH copy the openwrt sysupgrade firmware and upgrade as per the default instructions. Signed-off-by: David Bentham <db260179@gmail.com>
* ath79: Modify GL.iNer GL-S200 lan wan interfaceWeiping Yang2024-02-02
| | | | | | | | | | | | | Specifications: lan: eth0 wan: eth1 Problem Description: The lan wan port is reversed with the current machine. Use eth0 as LAN port and eth1 as WAN port. Signed-off-by: Weiping Yang <weiping.yang@gl-inet.com>
* ath79: add WAN definition for GL.iNET GL-E750 (Mudi)Jan Fuchs2024-02-02
| | | | | | | Add the default WAN interface to use QMI, to have WAN configured right from the start. Signed-off-by: Jan Fuchs <jf@simonwunderlich.de>
* ath79: add WWAN serial driver and qmi for GL.iNET GL-E750 (Mudi)Jan Fuchs2024-02-02
| | | | | | | | The driver for the cellular modems serial interface and qmi was missing from the default device packages. The driver is required to interact with the modem using AT commands. Signed-off-by: Jan Fuchs <jf@simonwunderlich.de>
* kernel: bump 5.15 to 5.15.148John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.148 Removed upstreamed: generic/hack-5.15/321-powerpc_crtsavres_prereq.patch[1] Manually rebased: target/linux/octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.148&id=0b11a145eb00d51f7ef18cfcae587b93f9adb1e9 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit?h=v5.15.148&id=b67064bd372300a75293efbbc70624996dccffd4 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.75John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.75 Removed upstreamed: generic/hack-6.1/321-powerpc_crtsavres_prereq.patch[1] generic/pending-6.1/540-ksmbd-only-v2-leases-handle-the-directory.patch[2] Rebased: bcm27xx/patches-6.1/950-0670-fbdev-Don-t-cancel-deferred-work-if-pagelist-empty.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=16b88e68b85d5520c28498bb847358ff6300cb90 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/fs/smb?h=v6.1.75&id=c866866c795296d3637ab0d48a3d8a3ef5d6f4a3 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=81f444f22816a82ada2cc787a2845cffc8c584a6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport PHY package MMD patchChristian Marangi2024-02-01
| | | | | | | | | | Backport PHY package MMD patch merged upstream that add support for writing MMD regs for the PHY package and support for writing to PHY package at an offset. All affected patches automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ath79: convert ath10k calibration data to NVMEM (ASCII MAC)Shiji Yang2024-02-01
| | | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with mtd ASCII MAC address. The "calibration" NVMEM cell size is 0x844. All unportable MAC address settings have been moved to '10_fix_wifi_mac' scripts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k calibration data to NVMEM (binary MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with mtd binary MAC address. The "calibration" NVMEM cell size is 0x844. The MAC addresses are assigned via dts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k calibration data to NVMEM (built-in MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with built-in MAC address. The "calibration" NVMEM cell size is 0x844. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (ASCII MAC)Shiji Yang2024-02-01
| | | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with mtd ASCII MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. All unportable MAC address settings have been moved to '10_fix_wifi_mac' scripts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (binary MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with mtd binary MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. The MAC addresses are assigned via dts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (built-in MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with built-in MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: add back board-2.bin to COMFAST devicesShiji Yang2024-02-01
| | | | | | | | The ath10k driver will load both pre-calibration data and board-2.bin if board-2.bin exists. So it's not necessary to remove it. And this change won't increase jffs2 image size. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* generic: 6.1: backport at803x split patchesChristian Marangi2024-02-01
| | | | | | | | | | | | | | Backport at803x split patches merged upstream to tidy things up for the at803x PHY driver. New Kernel config are introduced hence any user needs to be updated. Downstream ipq40xx patch require rework to correctly move them to the qcom specific PHY directory. All affected patch automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bcm27xx: bcm2712: remove boot-2711 image filesÁlvaro Fernández Rojas2024-02-01
| | | | | | | | | | According to Raspberry Pi documentation, the RPi 5 First Stage Bootloader loads the linux kernel instead of loading the Second Stage Bootloader (start.elf): https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#differences-on-raspberry-pi-5 Fixes: 8b63d9a ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: fix platform_copy_configÁlvaro Fernández Rojas2024-02-01
| | | | | | | Only bcm2708 and bcm2709 use "kernel.img" file name. bcm2710 and bcm2711 use "kernel8.img" and bcm2712 uses "kernel_2712.img". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: improve image generation scriptÁlvaro Fernández Rojas2024-02-01
| | | | | | | | | | - Exit immediately on a non-zero status. - Remove empty lines. - Remove unused variables. - Add missing ptgen variables for readability. - Refactor SYNTAX if block. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: properly detect boot partitionÁlvaro Fernández Rojas2024-02-01
| | | | | | | Automatically detect boot partition instead of forcing /dev/mmcblk0p1. This way users can still get /boot mounted when booting from USB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: set_preinit_iface: add RPi 5Álvaro Fernández Rojas2024-02-01
| | | | | | | | Add missing Rasoberry Pi 5 board_name to set_preinit_iface in order to get ethernet working on failsafe mode. Fixes: 8b63d9a ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: fixes for Ethernet on MT7988 SoCDaniel Golle2024-02-01
| | | | | | | | * fix switch ports with modes other than 1000M/Full * set 32-bit dma_coherent_mask to get PPE to work with 4 GiB of RAM * sync driver for built-in 1GE PHY with MediaTek SDK sources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qualcommax: dts: add reset delay to qca8081 phyChukun Pan2024-01-30
| | | | | | | | The qca8081 phy needs to set the reset delay time, otherwise it will not be detected by the mdio bus. Fixes: 75ad5c2 ("qualcommax: switch to qca8081 upstream PHY driver") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* bcm27xx: bcm2712: enable USB symbols and drop packagesÁlvaro Fernández Rojas2024-01-29
| | | | | | | This allows booting from USB. Fixes: 8b63d9ac4ae9 ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* lantiq: replace patch with upstream versionAleksander Jan Bajkowski2024-01-29
| | | | | | Replace recently added patch with version accepted upstream. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* bcm27xx: refresh bcm2711 kernel configÁlvaro Fernández Rojas2024-01-28
| | | | | | Refresh outdated bcm2711 (RPi 4B) kernel config. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* qualcommax: switch to qca8081 upstream PHY driverChristian Marangi2024-01-27
| | | | | | | | Switch to qca8081 upstream PHY. Update every device that have LEDs attached to the qca8081 PHY to follow new way of defining the LEDs and add original OEM configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch adding more speed modes to LED netdev triggerChristian Marangi2024-01-27
| | | | | | | Backport upstream patch adding more speed modes to LED netdev trigger. Fixes: 2c39269b6e00 ("generic: 6.1: backport qca808x LED support patch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport qca808x LED support patchChristian Marangi2024-01-27
| | | | | | | Backport qca808x LED support patch merged upstream needed to drop handling of it from the SSDK for ipq807x target. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.