aboutsummaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAge
* kernel: bump 6.1 to 6.1.43John Audia2023-08-09
| | | | | | | | | | | | | | | | | | | | | 1. Disable Ampere errata fix in target/linux/generic/config-6.1 2. Update kernel Changelog: https://lore.kernel.org/stable/2023061431-modular-data-8489@gregkh/ Manually rebased: bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch bcm27xx/patches-6.1/950-0520-xhci-constrain-XHCI_VLI_HUB_TT_QUIRK-to-old-firmware.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.125John Audia2023-08-09
| | | | | | | | | | 1. Add new symbols to generic config 2. Bump kernel Changelog: https://lore.kernel.org/stable/2023080818-groin-gradient-a031@gregkh/ All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.124John Audia2023-08-09
| | | | | | | | | | | | | Changelog: https://lore.kernel.org/stable/2023080341-curliness-salary-4158@gregkh/ 1. Needed to make a change to to package/kernel/linux/modules/netsupport.mk due to upstream moving vxlan to its own directory[1]. @john-tho suggested using the the 6.1 xvlan FILES to circumvent. 2. All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.124&id=77396fa9096abdbfbb87d63e73ad44d5621cf103 Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: add support for Acer Predator W6David Bauer2023-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: MediaTek MT7986A RAM: 1GB DDR4 FLASH: 4GB eMMC WiFi: 2x2 2.4 GHz 802.11 b/g/n/ax MT7916 DBDC 4x4 5 GHz 802.11 a/n/ac/ax MT7986 2x2 6 GHz 802.11ax MT7916 DBDC ETH: 4x LAN 1Gbit/s (MT7531) 1x WAN 2.5Gbit/s (GPY211) BTN: RESET, WPS LED: Antenna LEDs (GPIO) Mood-LED (Kinetic KTD2601) - unsupported UART: Header nest to USB port - 3V3 115200 8N1 [BUTTON] GND - RX - TX [USB] Installation ------------ 1. Connect to the device using serial console. 2. Interrupt the Autoboot process when promted by sending '0' twice. 3. Serve the OpenWrt initramfs image using TFTP at 192.168.1.66. Name the image "predator.bin" and conenct the TFTP server to the routers LAN port. 4. Configure U-Boot to allow loading unsigned images from MMC $ setenv bootcmd 'mmc read 0x40000000 0x00004400 0x0010000; fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 0x40000000'; saveenv 5. Transfer the image from U-Boot $ setenv serverip 192.168.1.66; setenv ipaddr 192.168.1.1; tftpboot 0x46000000 predator.bin; fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 6. Wait for OpenWrt to boot 7. Transfer the OpenWrt sysupgrade image to the router using scp. 8. Install OpenWrt using sysupgrade. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: filogic: restore non-const type in pinctrl-mt7988 driverDaniel Golle2023-08-03
| | | | | | | | When building with Linux 5.15 the 'const' type results in warnings. Restore the original non-const type in those cases. Fixes: 36d0aa9c2d ("mediatek: filogic: sync pinctrl-mt7988 with MediaTek SDK") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: update MT7988 device treeDaniel Golle2023-08-03
| | | | | | | | * move ethernet to mt7988a.dtsi * move switch definition to mt7988a.dtsi * add PHY LEDs Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: sync pinctrl-mt7988 with MediaTek SDKDaniel Golle2023-08-03
| | | | | | Update pinctrl driver for the MT7988 with driver from mtk-openwrt-feeds. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: add kernel 6.1 as testing kernelStefan Kalscheuer2023-08-02
| | | | | | | | | | With an initial set of patches and configs in place let's start testing with kernel 6.1. Run-tested on the cortexa9 subtarget (WRT1900ACS, Turris Omnia) Tested-by: Etienne Champetier <champetier.etienne@gmail.com> Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* mvebu: copy 5.15 kconfigs to 6.1Stefan Kalscheuer2023-08-02
| | | | | | Start 6.1 migration with a full copy of the current stable config. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* mvebu: refresh patches for 6.1Stefan Kalscheuer2023-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the following patches: 100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to [1] 101-ARM-dts-turris-omnia-enable-LED-controller-node [2] 702-net-next-ethernet-marvell-mvnetaMQPrioOffload [3] 703-net-next-ethernet-marvell-mvnetaMQPrioFlag [4] 704-net-next-ethernet-marvell-mvnetaMQPrioQueue [5] 705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload [6] 710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi [7] Manually rebased: 902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU All other patches automatically rebased [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=94a29bffdd59498382131fd428fed221f5c96def [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=40624346b7ae0c2b1209fc9993ea30699e512c50 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=75fa71e3acadbb4ab5eda18505277eb9a1f69b23 [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e7ca75fe6662f78bfeb0112671c812e4c7b8e214 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e9f7099d0730341b24c057acbf545dd019581db6 [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2551dc9e398c37a15e52122d385c29a8b06be45f [7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cd1e1735aeab49abc679218a79ee764c0d394880 Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* mvebu: copy 5.15 patches to 6.1Stefan Kalscheuer2023-08-02
| | | | | | To start migration to Kernel 6.1 we copy all existing patches from 5.15. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* mediatek: filogic: enable driver for MediaTek XS-PHYDaniel Golle2023-07-31
| | | | | | | Enable driver for MediaTek SuperSpeedPlus XS-PHY transceiver for the USB3.1 GEN2 controllers found in the MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qualcommax: ipq807x: fix Gen2 PCIe portRobert Marko2023-07-31
| | | | | | | | | | | | | | Gen2 PCIe port recently got broken on IPQ807x during update to 6.1.39 as upstream backported: ("PCI: qcom: Remove PCIE20_ prefix from register definitions") [1] So, fix it by adding a pending upstream fix for it [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/pci/controller/dwc/pcie-qcom.c?h=v6.1.39&id=db962c7a711c3393a80a18219960cd54fb33c53d [2] https://patchwork.kernel.org/project/linux-arm-msm/patch/20230724063429.3980462-1-quic_srichara@quicinc.com/ Fixes: fec22f8375b4 ("kernel: bump 6.1 to 6.1.39") Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 6.1 to 6.1.42John Audia2023-07-30
| | | | | | | | | | | | | | | Manually rebased: generic/pending-6.1/203-kallsyms_uncompressed.patch All other patches automatically rebased. Changelog: https://lore.kernel.org/stable/2023072749-gumming-selector-a081@gregkh/ Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.123John Audia2023-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*] Removed upstreamed: backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2] pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3] pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4] bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5] bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499 Build system: x86/64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Audia <therealgraysky@proton.me> [rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: mt7621-wdt: use phandle to access system controller registersShiji Yang2023-07-30
| | | | | | | | | | | | | These patches allow the driver to access some watchdog registers via a phandle to the system controller node[1]. To apply these changes, we need to add "mediatek,sysctl" to the SoC dtsi. This commit also remove the redundent clocks, interrupts and resets properties. [1] https://lore.kernel.org/all/20230214103936.1061078-2-sergio.paracuellos@gmail.com Tested on Motorola MWR03 (MT7628) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for legacy SoCsShiji Yang2023-07-30
| | | | | | | | | | | | | | | | | | | | This series of upstream patches properly implement a clock and reset driver for old ralink SoCs[1]. And it includes some related fixes[2] and improvements[3][4]. All patches have been merged into linux-next. They will be part of upcoming Linux 6.5. In order to switch to the new system controller driver, all clocks and resets properties in SoC dtsi have been updated, and kernel symbol "CONFIG_CLK_MTMIPS" have been added to the kernel config files. [1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/all/20230622-mips-ralink-clk-wuninitialized-v1-1-ea9041240d10@kernel.org [3] https://lore.kernel.org/all/OSYP286MB03120BABB25900E113ED42B7BC5CA@OSYP286MB0312.JPNP286.PROD.OUTLOOK.COM [4] https://lore.kernel.org/all/TYAP286MB03151148AF8C054621DD55C3BC23A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Tested on Motorola MWR03 (MT7628) Tested on Haier HW-L1W (MT7620) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for mt7621Shiji Yang2023-07-30
| | | | | | | | | | | | | | | | | This series of upstream patches makes the system controller node as a reset provider[1][2], and it also includes some clock and reset driver fixes[3][4]. Meanwhile, all clocks and resets properties in the SoC device tree have been updated to be compatible with the new driver. [1] https://lore.kernel.org/r/20220110114930.1406665-2-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/r/20220210094859.927868-2-sergio.paracuellos@gmail.com [3] https://lore.kernel.org/r/20221217074806.3225150-1-sergio.paracuellos@gmail.com [4] https://lore.kernel.org/r/20230206083305.147582-1-sergio.paracuellos@gmail.com Tested on RAISECOM MSG1500 X.00 Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: backport proper fix for mtd preventing devices probingRafał Miłecki2023-07-30
| | | | | | | | | | Improper of_platform_populate() call caused issue with probing devices drivers. Fixes: 41e1e838fbbb ("kernel: backport mtd patch adding of_platform_populate() calls") Fixes: #10232 Ref: 79af0593a30b ("kernel: switch back 5.15 to fw_devlink=permissive") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport more DT changes queued for v6.6Rafał Miłecki2023-07-29
| | | | | | Those sort out BCM53573 Ethernet info finally. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: pinctrl: support requesting different functions for same groupShiji Yang2023-07-29
| | | | | | | | | | MT7620 wireless radio needs change the pin group function between "gpio" and "pa" during the calibration process. However, ralink pinctrl driver doesn't support requesting different functions for the same group. This patch enables pinctrl consumers to perform such operations. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: use NVMEM cells with mt76 EEPROM for Netgear R6220 & WNDR3700 v5Rafał Miłecki2023-07-28
| | | | | | | This uses new upstream DT binding. It's more generic (NVMEM) compared to the old one (MTD). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: use fixed layout cell "mac-base" for Netgear WNDR3700 v5Rafał Miłecki2023-07-28
| | | | | | This drops a use of downstream "mac-address-increment". Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: replace "mac-address-ascii" with "mac-base"Rafał Miłecki2023-07-28
| | | | | | | With upstream accepted "mac-base" binding there is no need for a downstream "mac-address-ascii" workaround anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: filogic: fix broken sysupgrade scriptPetr Štetiar2023-07-28
| | | | | | | | | Changes introduced in commit 54dc1cde48a4 ("mediatek: filogic: add support for Xiaomi WR30U") missed to end the case item with mandatory `;;` which lead to a broken sysupgrade. Fixes: 54dc1cde48a4 ("mediatek: filogic: add support for Xiaomi WR30U") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq807x: prpl-haze: fix sysupgrade flashing from bootloaderPetr Štetiar2023-07-28
| | | | | | | | | | | | | | | | | | | | While flashing sysupgrade image from U-Boot, then the rootfs_data overlay filesystem formatting is left for the fstools during firstboot, but that wont work as mkfs.f2fs is missing in the sysupgrade image: mount_root: overlay filesystem in /dev/loop0 has not been formatted yet mount_root: no usable overlay filesystem found, using tmpfs overlay sh: mkfs.f2fs: not found Filesystem Size Used Available Use% Mounted on /dev/loop0 139.6M 46.9M 92.6M 34% /overlay Number Start (sector) End (sector) Size Code Name 20 98850 406349 150.1 MiB FFFF rootfs So lets fix it by adding f2fs support to the sysupgrade image. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: filogic: add specific layout for WR30UHank Moretti2023-07-27
| | | | | | | | | Because this device enable NMBM by default, most users use custom U-Boot with NMBM-Enabled in Chinese forums. This layout is the same as the ubootmod layout but enabling NMBM. Signed-off-by: Hank Moretti <mchank9999@gmail.com>
* mediatek: filogic: add support for Xiaomi WR30UHank Moretti2023-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: ESMT F50L1G41LB 128MB RAM: NT52B128M16JR-FL 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Mesh Power: DC 12V 1A Flash instructions: 1. Get ssh access Check this link: https://forum.openwrt.org/t/openwrt-support-for-xiaomi-ax3000ne/153769/22 2. Backup import partitions ``` dev: size erasesize name mtd1: 00100000 00020000 "BL2" mtd2: 00040000 00020000 "Nvram" mtd3: 00040000 00020000 "Bdata" mtd4: 00200000 00020000 "Factory" mtd5: 00200000 00020000 "FIP" mtd8: 02200000 00020000 "ubi" mtd9: 02200000 00020000 "ubi1" mtd12: 00040000 00020000 "KF" ``` Use these commands blow to backup your stock partitions. ``` nanddump -f /tmp/BL2.bin /dev/mtd1 nanddump -f /tmp/Nvram.bin /dev/mtd2 nanddump -f /tmp/Bdata.bin /dev/mtd3 nanddump -f /tmp/Factory.bin /dev/mtd4 nanddump -f /tmp/FIP.bin /dev/mtd5 nanddump -f /tmp/ubi.bin /dev/mtd8 nanddump -f /tmp/KF.bin /dev/mtd12 ``` Then, transfer them to your computer via scp, netcat, tftp or others and keep them in a safe place. 3. Setup Nvram Get the current stock: `cat /proc/cmdline` If you find `firmware=0` or `mtd=ubi`, use these commands: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ``` If you find `firmware=1` or `mtd=ubi1`, use these commands: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ``` 4. Flash stock-initramfs-factory.ubi If you find `firmware=0` or `mtd=ubi`: `ubiformat /dev/mtd9 -y -f /tmp/stock-initramfs-factory.ubi` If you find `firmware=1` or `mtd=ubi1`: `ubiformat /dev/mtd8 -y -f /tmp/stock-initramfs-factory.ubi` Then reboot your router, it should boot to the openwrt initramfs system now. 5. Setup uboot-env Now it will be setup automatically in upgrade process, you can skip this step. If your `fw_setenv` did not work, you need run this command: `echo "/dev/mtd1 0x0 0x10000 0x20000" > /etc/fw_env.config` Then setup uboot-env: ``` fw_setenv boot_wait on fw_setenv uart_en 1 fw_setenv flag_boot_rootfs 0 fw_setenv flag_last_success 1 fw_setenv flag_boot_success 1 fw_setenv flag_try_sys1_failed 8 fw_setenv flag_try_sys2_failed 8 fw_setenv mtdparts "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata), 2048k(factory),2048k(fip),256k(crash),256k(crash_log), 34816k(ubi),34816k(ubi1),32768k(overlay),12288k(data),256k(KF)" ``` 6. Flash stock-squashfs-sysupgrade.bin Use shell command: `sysupgrade -n /tmp/stock-squashfs-sysupgrade.bin` Or go to luci web. If you need to change to Openwrt U-Boot layout, do next. If you do not need, please ignore it. Change to OpenWrt U-Boot: 1. Flash ubootmod-initramfs-factory.ubi Check mtd partitions: `cat /proc/mtd` ``` mtd7: 00040000 00020000 "KF" mtd8: 02200000 00020000 "ubi_kernel" mtd9: 04e00000 00020000 "ubi" ``` Run following command: `ubiformat /dev/mtd8 -y -f /tmp/ubootmod-initramfs-factory.ubi` Then reboot your router, it should boot to the openwrt initramfs system now. 2. Check mtd again ``` mtd7: 00040000 00020000 "KF" mtd8: 07000000 00020000 "ubi" ``` Make sure mtd8 is ubi. 3. Install kmod-mtd-rw Run command: `opkg update && opkg install kmod-mtd-rw` Or get it in openwrt server, or build it yourself, then install it manually Then run this command: `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Clean up pstore Run Command: `rm -f /sys/fs/pstore/*` 5. Format ubi and create new ubootenv volume ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB ``` 6. (Optional) Add recovery boot feature. ``` ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/ubootmod-initramfs-recovery.itb ``` 7. Flash Openwrt U-Boot ``` mtd write /tmp/ubootmod-preloader.bin BL2 mtd write /tmp/ubootmod-bl31-uboot.fip FIP ``` 6. Flash ubootmod-squashfs-sysupgrade.itb Use shell command: `sysupgrade -n /tmp/ubootmod-squashfs-sysupgrade.itb` Or go to luci web. Now everything is done, Enjoy! Go Back to stock from Openwrt U-Boot: 1. Force flash ubootmod-initramfs-recovery.itb Use shell command: `sysupgrade -F -n /tmp/ubootmod-initramfs-recovery.itb` Or go to luci web. Then it should boot to the openwrt initramfs system now. 2. Format ubi and Nvram ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 mtd erase Nvram ``` 3. Install kmod-mtd-rw Run command: `opkg update && opkg install kmod-mtd-rw` Or get it in openwrt server, or build it yourself, then install it manually Then run this command: `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Flash stock U-Boot and ubi ``` mtd write /tmp/BL2.bin BL2 mtd write /tmp/FIP.bin FIP mtd write /tmp/ubi.bin ubi ``` Then reboot your router, waiting it finished rollback in minutes. Go Back to stock from stock layout Openwrt: Just run command: `ubiformat /dev/mtd8 -y -f /tmp/ubi.bin` Then reboot your router, waiting it finished rollback in minutes. Notes: 1. Openwrt U-Boot and ubootmod openwrt did not enable NMBM. Please make your backup safe. Signed-off-by: Hank Moretti <mchank9999@gmail.com>
* ipq4019: fix support for AVM FRITZ!Repeater 3000Alexander Friese2023-07-26
| | | | | | | | new versions of the device have NAND with 8bit ECC which was not yet supported before. This change removes ECC restrictions. Signed-off-by: Alexander Friese <af944580@googlemail.com>
* rockchip: enable wifi support for NanoPC T4Lu jicong2023-07-26
| | | | | | wifi module: AP6356S (BCM4356) SDIO Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* rockchip: add FriendlyARM NanoPC T4 supportLu jicong2023-07-26
| | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* ipq40xx: add support for Teltonika RUTX50David Bauer2023-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4018 RAM: 256M Flash: 16MB SPI-NOR (W25Q128) 128MB SPI-NAND (XTX) WiFi: 2T2R (2GHz 802.11n ; 5 GHz 802.11ac) ETH: 4x LAN ; 1x WAN (Gigabit) CELL: Quectel RG501Q 3G/4G/5G UART: Available on the goldfinger connector (Pinout silkscreened) 115200 8N1 3V3 - Only connect RX / TX / GND Installation ------------ 1. Enable SSH in the Teltonika UI (System --> Administration --> Access Control) 2. Check from which partition set the device is currently running from. $ cat /proc/boot_info/rootfs/primaryboot In case this output reads 0, install a Software update from Teltonika first. After upgrade completion, check this file now reads 1 before continuing. 2. Transfer the OpenWrt factory image to the device using scp. Use the same password (user root!) as used for the Web-UI. $ scp -O openwrt-factory.bin root@192.168.1.1:/tmp 3. Connect to the device using ssh as the root user. 4. Install OpenWrt by writing the factory image to flash. $ ubiformat /dev/mtd16 -y -f /tmp/openwrt-factory.bin 5. Instruct the bootloaer to boot from the first partition set. $ echo 0 > /proc/boot_info/rootfs/primaryboot $ cat /proc/boot_info/getbinary_bootconfig > /tmp/bootconfig.bin $ cat /proc/boot_info/getbinary_bootconfig1 > /tmp/bootconfig1.bin $ mtd write /tmp/bootconfig.bin /dev/mtd2 $ mtd write /tmp/bootconfig1.bin /dev/mtd3 6. Reboot the device. $ reboot Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: move Teltonika RUT STM32 IO to specific DTSDavid Bauer2023-07-26
| | | | | | Prepare to re-use the DTS for the RUTX50. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 6.1 to 6.1.40John Audia2023-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-6.1/701-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] generic/pending-6.1/160-workqueue-fix-enum-type-for-gcc-13.patch[2] qualcommax/patches-6.1/0022-v6.5-soc-qcom-mdt_loader-Fix-unconditional-call-to-scm_pa.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=685b57a1221c38ec8b456f968264d2496715820c 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=2d57a1590f4d8c516f5aaf8fd5bb4f52d67275d8 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=33f8dff6e1cbba5c2ec85fa5649c0a759a7e685c Build system: x86/64, filogic/xiaomi_redmi-router-ax6000-ubootmod Build-tested: x86/64, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.39John Audia2023-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[1] generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[2] bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch[3] bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch[4] bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch[5] bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[6] bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[7] mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch[8] qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[9] Manually rebased: bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ab0bd172d6289310a05a0cd15e1432e828d386ae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=6df680709d901346831ef8f221cc90a42062c526 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=5044e5f2511c9afdf9880d2bb6b9d37dfc345dac 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=e27948f329f7e02591ed1feb9a7710c2ccf89a83 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ad2928e7f3f6120a0bd18aa1056b3b24068027c5 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=2b55a985727833f37c39911f34096b3fdf2a367d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=90d4c487cd658b51212eb65ae804ab11af193672 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=7e3ee25e8c7c7be1eacdfc6d9f5f0e550a2af241 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=b20854ef6c4955be3310975a72f02d92cb01d6d4 Build system: x86/64 Build-tested: x86/64 Run-tested: x86/64 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Co-authored-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: John Audia <therealgraysky@proton.me> [ rebase bcm27xx and mediatek patches, refresh commit description ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [ minor fixup to bcm27xx patches, refresh commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: drop mips highmem offset start overridesFelix Fietkau2023-07-24
| | | | | | | | | | | The maximum offset that can be supported is 0x20000000 Do not override it to to something bigger than that on MT7621, as that could cause issues based on the fixed memory mappings. This makes the last 64 MB RAM unusable on MT7621 devices with 512 MB but avoids incurring a heavy performance hit Fixes: cd2b74e01e8d ("ramips: mt7621: disable highmem support and remove highmem offset patch") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7621: disable highmem support and remove highmem offset patchFelix Fietkau2023-07-24
| | | | | | | | | | On MT7621 it was observed, that enabling highmem support causes a significant performance drop, as documented in: https://github.com/openwrt/openwrt/issues/13151 By adjusting the highmem start offset, we avoid leaving any RAM unaddressable, even on devices with 512 MB Fixes: https://github.com/openwrt/openwrt/issues/13151 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: add BCM53573 Ethernet fix sent upstream for v6.6Rafał Miłecki2023-07-23
| | | | | | | | | | | | | It seems that DSA-based b53 driver never worked with BCM53573 SoCs and BCM53125. In case of swconfig-based b53 this fixes a regression. Switching bgmac from using mdiobus_register() to of_mdiobus_register() resulted in MDIO device (BCM53125) having of_node set (see of_mdiobus_register_phy()). That made downstream b53 driver read invalid data from DT and broke Ethernet support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm27xx: update dwc_otc driver with new kthread_complete_and_exit nameChristian Marangi2023-07-23
| | | | | | | | | | Kernel 6.1 renamed and moved complete_and_exit to kthread_complete_and_exit. This was just a rename and nothing is changed implementation wise. Update to the new symbol name to fix compilation error. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: add missing SPDX headerDavid Bauer2023-07-22
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: filogic: set DEVICE_DTS_LOADADDR for BPi-R3Daniel Golle2023-07-22
| | | | | | | U-Boot complains that the overlayed DT needs relocation, so set DEVICE_DTS_LOADADDR to have it relocated. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for ZyXEL NWA50AX ProDavid Bauer2023-07-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7981 RAM: 512M DDR4 FLASH: 256M NAND ETH: MaxLinear GPY211 (2.5GbE N Base-T) WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax) BTN: 1x Reset LED: 1x Multi-Color UART Console ------------ Available below the rubber cover next to the ethernet port. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. In case this is not the case, OpenWrt will boot only one time, returning to the ZyXEL firmware the second boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP / Recovery ---------------------------- This installation routine is especially useful in case of a bricked device. Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin. $ atnf nwa50axpro-openwrt-initramfs.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd9 get-status $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd9 set-active-image 0 Copy the OpenWrt sysupgrade image to the device using scp. Write the sysupgrade image to NAND using sysupgrade. $ sysupgrade -n image.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq806x: reorganize 02_network board.d scriptChristian Marangi2023-07-21
| | | | | | | Reorganize 02_network board.d script by splitting setup switch and setup mac address. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: rename kernel files to generic nameChristian Marangi2023-07-21
| | | | | | | Drop 6.1 tag from files directory for ipq806x now that we moved to 6.1 by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: drop useless kernel patches and dts filesChristian Marangi2023-07-21
| | | | | | | Drop useless 5.15 kernel patches and files now that we moved to kernel 6.1 by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: move to kernel 6.1 by defaultChristian Marangi2023-07-21
| | | | | | Move to kernel 6.1 by default in preparation for DSA introduction. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: backport patch fixing broken hwspinlockChristian Marangi2023-07-21
| | | | | | | Backport merged patch fixing broken hwspinlock due to missing regmap config for SFPB MMIO implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* octeon: use fixed layout cell "mac-base" for Cisco vEdge 1000Rafał Miłecki2023-07-21
| | | | | | | | | | | This drops a use of downstream "mac-address-increment". Cc: Christian Svensson <blue@cmd.nu> Cc: Tommy Nevtelen <tommy@nevtelen.com> Cc: Viktor Ekmark <viktor@ekmark.se> Cc: Daniel Wennberg <github@networkninja.se> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Christian Svensson <blue@cmd.nu>
* ramips: replace "mac-address-ascii" with "mac-base"Rafał Miłecki2023-07-21
| | | | | | | | | With upstream accepted "mac-base" binding there is no need for a downstream "mac-address-ascii" workaround anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [TP-Link EC330-G5u v1 - OK] Tested-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ath79: move ubnt-xm 64M RAM boards back to genericFelix Baumann2023-07-19
| | | | | | | | | return ubnt_rocket-m and ubnt_powerbridge-m back to ath79-generic They have enough RAM-ressources to not be considered as tiny. This reverts the commit f4415f7635164ec07ddc22f56df93555804b5767 partially Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Powered by cgit, Themed by Ted Yin.