aboutsummaryrefslogtreecommitdiff
path: root/target/linux/rockchip/armv8
Commit message (Collapse)AuthorAge
* kernel/rockchip: Create kernel files for v6.6 (from v6.1)Antonio Flores2024-05-07
| | | | | | | | This is an automatically generated commit. When doing `git bisect`, consider `git bisect --skip`. Signed-off-by: Antonio Flores <antflores627@gmail.com>
* rockchip: add Bananapi-R2 Pro board supportAntonio Flores2024-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware spec: - Rockchip RK3568 Quad-core ARM Cortex-A55 CPU 2GHz - GPU Mali-G52 1-Core-2EE OpenGL ES3.2 Vu1kn 1.1 OpenCL 2.0 - Memory2G DDR3 SDRAM (option 4G) - Storage Onboard 16GB eMMC Flash, Micro SD-Card slot, SATA 3.0 Port,SPI flash - Network 5 x 10/100/1000 Mbit/s Ethernet MT7531 - Display 1 HDMI port, 2 DSI interface(1 DSI can change to LVDS by software) - Camera 1 CSI camera interface - Audio Output HDMI & I2S & Speaker & Headphone - USB port USB 3.0 PORT (x2), micro USB OTG (x1) - PCIE 1 mini pcie interface & 1 M.2 key-e interface - Remote IR Receiver (x1) - GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). - Switches Reset button, Power button, U-boot button - LED Power Status - Power Source 12 volt 2A via DC Power Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) Boot from the SD card 1-hold down the MaskRom button 2-Connect DC power 3-Wait 5 seconds, release the button. eMMC Installation: 1-Uncompress the OpenWrt sysupgrade image 2-fash to eMMC dd if=openwrt-rockchip-armv8-sinovoip_bpi-r2-pro-squashfs-sysupgrade.img of=/dev/mmcblk1 sync 3-remove SD card reboot Signed-off-by: Antonio Flores <antflores627@gmail.com>
* rockchip: enable MT7531 and RTC driversAntonio Flores2024-05-05
| | | | | | This patch enable MT7531 switch and RTC drivers for BPI-R2 Pro. Signed-off-by: Antonio Flores <antflores627@gmail.com>
* rockchip: add driver for hardware RNGDaniel Golle2024-05-04
| | | | | | | | | | | | | | | | Rockchip SoCs used to have a random number generator as part of their crypto device, and support for it has to be added to the corresponding driver. Newer Rockchip SoCs like the RK3568 have an independent True Random Number Generator device. Import pending patchset which adds a driver for it, include it in Kconfig and enable it in the device tree. Doing so significantly reduces the time needed to boot devices based on those SoCs, from about 27 seconds until Ethernet is up and running to less than 13 seconds with a minimal snapshot image. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rockchip: add Radxa E25 board supportMarius Durbaca2024-03-23
| | | | | | | | | | | | | | | | | | | | | | Radxa E25 is a network application carrier board for the Radxa CM3 Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC. It has the following features: - MicroSD card socket, on board eMMC flash - 2x 2.5GbE Realtek RTL8125B Ethernet transceiver - 1x USB Type-C port (Power and Serial console) - 1x USB 3.0 OTG port - mini PCIe socket (USB or PCIe) - ngff PCIe socket (USB or SATA) - 1x User LED and 16x RGB LEDs - 26-pin expansion header Installation: Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
* rockchip: remove LED label hackTianling Shen2024-02-22
| | | | | | | Now we support parsing the color and function properties. Ref: e814acc59948 ("base-files: support parse DT LED color and function") Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: add Radxa CM3 IO board supportMarius Durbaca2024-02-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3566 ARM64 (4 cores) - up to 8GB LPDDR4X - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - 10/100/1000 Base-T - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Reviewed-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
* rockchip: add NanoPi R4S Enterprise Edition buildTianling Shen2024-02-19
| | | | | | | | | | | FriendlyElec renamed the NanoPi R4S board with EEPROM (mac address) to "enterprise" edition, and it was added as a "new" board in upstream kernel. This patch switched to use that upstreamed dts and removed local EEPROM patch. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: add NanoPi R2C Plus supportTianling Shen2024-02-19
| | | | | | | | | | | | The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board eMMC flash (8G) included. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: make SMP affinity of RTL8152 on XHCI more robustFurong Xu2023-12-15
| | | | | | | XHCI bus numbers are assigned dynamically, it may varies among boards, match the device irq name with regexp, drop the hardcoded name. Signed-off-by: Furong Xu <xfr@outlook.com>
* rockchip: fix eth1 irq affinityFurong Xu2023-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NanoPi R2S and some other RK3328 boards use RTL8152 as eth1, which is connected to xhci-hcd:usb1 but not xhci-hcd:usb3 |:~# cat /proc/interrupts | CPU0 CPU1 CPU2 CPU3 | 11: 53449 171813 129595 87823 GICv2 30 Level arch_timer | 18: 0 0 0 0 GICv2 94 Level rockchip_usb2phy | 19: 0 0 0 0 GICv2 32 Level ff1f0000.dma-controller | 20: 0 0 0 0 GICv2 33 Level ff1f0000.dma-controller | 21: 4 0 0 0 GICv2 89 Level ttyS2 | 22: 0 0 0 0 GICv2 43 Level ff350800.iommu | 23: 0 0 0 0 GICv2 106 Level ff360480.iommu | 24: 0 1417932 0 0 GICv2 56 Level eth0 | 25: 334 0 0 4422194 GICv2 99 Level xhci-hcd:usb1 | 26: 0 0 0 0 GICv2 48 Level ehci_hcd:usb3 | 27: 0 0 0 0 GICv2 49 Level ohci_hcd:usb2 | 28: 3285 0 0 0 GICv2 69 Level ff160000.i2c | 29: 0 0 0 0 rockchip_gpio_irq 24 Level rk805 | 30: 0 0 0 0 rk805 0 Edge rk805_pwrkey_fall | 35: 0 0 0 0 rk805 5 Edge RTC alarm | 37: 0 0 0 0 rk805 7 Edge rk805_pwrkey_rise | 38: 0 0 0 0 GICv2 90 Level rockchip_thermal | 39: 0 0 0 0 GICv2 72 Edge ff1a0000.watchdog | 40: 2601 0 0 0 GICv2 44 Level dw-mci | 41: 0 0 0 0 rockchip_gpio_irq 0 Edge keys |IPI0: 1559 1208 893 1131 Rescheduling interrupts |[...] Fix 40-net-smp-affinity to match the correct device irq name. Signed-off-by: Furong Xu <xfr@outlook.com>
* rockchip: require image metadataDavid Bauer2023-11-27
| | | | | | | | | All devices in the rockchip target have appended image-metadata. Enforce the presence of this metadata to avoid flashing incomplete images. This is the de-facto standard for almost all OpenWrt targets. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: add NanoPi R5C supportTianling Shen2023-11-26
| | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: add NanoPi R5S supportTianling Shen2023-11-26
| | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Tested-by: Packet Please <pktpls@systemli.org> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: armv8: broaden boardnameTianling Shen2023-11-26
| | | | | | Now we have rk356x support :-) Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: enable drivers for rk356xTianling Shen2023-11-26
| | | | | | | Enable all necessary drivers for the rk356x SoCs, including PHY, SCMI, SPI etc. Also backport 2 upstream patches for sdhci fixes. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: remove kernel 5.15 patches and configTianling Shen2023-11-26
| | | | | | As we switched to kernel 6.1, these files can go. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* treewide: disable CONFIG_SLUB_DEBUG in target configsRafał Miłecki2023-11-09
| | | | | | | | | | | From the symbol help message: > SLUB has extensive debug support features. Disabling these can result > in significant savings in code size. There seems to be no need to enable those debugging features for standard use. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* rockchip: refresh kernel configRafał Miłecki2023-11-07
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: migrate FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER for 6.1Stefan Kalscheuer2023-06-25
| | | | | | | | | | The flag FORCE_MAX_ZONEORDER was renamed to ARCH_FORCE_MAX_ORDER in Kernel 6.1 [1]. Rename the flag in generic Kconfig and remove it from target configs. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0192445cb2f7ed1cd7a95a0fc8c7645480baba25 Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* rockchip: fix setup network config for nanopi r2cTianling Shen2023-06-17
| | | | | | | | Without it the WAN port won't be initialized properly. Fixes: 8f578c15b314 ("rockchip: add NanoPi R2C support") Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: Set CONFIG_FRAME_WARN depending on targetHauke Mehrtens2023-06-02
| | | | | | | | This set the CONFIG_FRAME_WARN option depending on some target settings. It will use the default from the upstream kernel and not the hard coded value of 1024 now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rockchip: add Orange Pi R1 Plus LTS supportTianling Shen2023-05-31
| | | | | | | | | The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise identical to OrangePi R1 Plus. Tested-by: Volkan Yetik <no3iverson@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: add Orange Pi R1 Plus supportTianling Shen2023-05-31
| | | | | | | | | | | | | | Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. This device is similar to the NanoPi R2S, and has a 16MB SPI NOR (mx25l12805d). The reset button is changed to directly reset the power supply, another detail is that both network ports have independent MAC addresses. Note: booting from SPI is currently unsupported, you have to install the image on a SD card. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: 6.1: refresh config and add missing symbolsTianling Shen2023-05-29
| | | | | | Refresh config for kernel 6.1 and add missing symbols Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: 6.1: copy patches, config from 5.15Tianling Shen2023-05-29
| | | | | | Copy patches and config from 5.15 kernel version. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: enable (ARM|ARM64)_MODULE_PLTS in generic configTony Ambardar2023-05-23
| | | | | | | | | | | | | | | | | | | This allows loading modules with large memory requirements, recently needed while testing on armvirt/32. Past forum discussions [1] and bug reports [2] also raised this and the ipq806x target already set it in response [3]. Given this increases kernel image size by only ~1KB, is generally useful on multi-platform kernels, and enabled by default on upstream arm32 Linux, add it to the generic config. The setting has similar utility on arm64, is a requirement for KASLR, and already enabled on most OpenWrt aarch64 targets, so pull this into the top-level generic config. [1]: https://forum.openwrt.org/t/vmap-allocation-for-size-442368-failed-use-vmalloc-size-to-increase-size/34545/7 [2]: https://github.com/openwrt/openwrt/issues/8282 [3]: f81e148eb6 ("ipq806x: update 4.19 kernel config"). Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* rockchip: add NanoPi R2C supportTianling Shen2023-05-18
| | | | | | | The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: backport Motorcomm YT8521/YT8531 supportTianling Shen2023-05-18
| | | | | | It will be used on NanoPi R2C and OrangePi R1 Plus LTS board. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* treewide: remove files for building 5.10 kernelNick Hainke2023-05-12
| | | | | | | | | | | All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke <vincent@systemli.org>
* rockchip: enable rk805 pinctrl driverTianling Shen2023-05-09
| | | | | | | This is required for ROC-RK3328-CC to light up the LED-s which are connected to rk805's gpio. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: improve handling of CONFIG_IO_URINGTony Ambardar2023-05-03
| | | | | | | | | | | | | | | | | | | | | | Kernel setting CONFIG_IO_URING supports high-performance I/O for file access and servers, generally for more performant platforms, and adds ~45 KB to kernel sizes. The need for this on less "beefy" devices is questionable, as is the size cost considering many platforms have kernel size limits which require tricky repartitioning if outgrown. The size cost is also large relative to the ~180 KB bump expected between major OpenWRT kernel releases. No OpenWrt packages have hard dependencies on this; samba4 and mariadb can take advantage if available (+KERNEL_IO_URING:liburing) but otherwise build and work fine. Since CONFIG_IO_URING is already managed via the KERNEL_IO_URING setting in Config-kernel.in (default Y), remove it from those target configs which unconditionally enable it, and update the defaults to enable it conditionally only on more powerful 64-bit x86 and arm devices. It may still be manually enabled as needed for high-performance custom builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: Deactivate CONFIG_COMPATHauke Mehrtens2023-04-29
| | | | | | | | | | | | | | This deactivates the CONFIG_COMPAT kernel option. With CONFIG_COMPAT the kernel will provide syscall interfaces for arm32 binaries in addition to the interfaces needed for arm64 binaries. In OpenWrt the complete userspace is compiled for this specific architecture and support for 32 bit ARM applications is not needed. This reduces the size and the attack surface for the systems. On all other targets CONFIG_COMPAT is already deactivated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Deactivate CONFIG_LEGACY_PTYSHauke Mehrtens2023-04-29
| | | | | | | | | The legacy (BSD) PTY support could open security problems in a system, We do not need them in OpenWrt, deactivate this option in all targets. Debian also deactivates this option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_ARM64_SW_TTBR0_PANHauke Mehrtens2023-04-29
| | | | | | | | | | | | | This activates the CONFIG_ARM64_SW_TTBR0_PAN option for all arm64 kernels by default. The CONFIG_ARM64_SW_TTBR0_PAN option prevents the kernel form accessing user space memory directly. This makes it harder to exploit the kernel. This is activated by default and was already activate on all other arm64 targets before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_HARDENED_USERCOPY for all targetsHauke Mehrtens2023-04-29
| | | | | | | | | | | | | | This activates CONFIG_HARDENED_USERCOPY for the remaining targets. This adds additional checks in the copy_from_user() and copy_to_user() functions. This was not activated for ARCHS38 before because of a bug in the Linux kernel 5.4 till 5.14, which as fixed and is described here: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/15 I do not know why this was deactivated for mt7629 and rockchip. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: update NVMEM symbolsRafał Miłecki2023-01-07
| | | | | Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* sunxi: ensure NanoPi R1 has unique MAC addressJan-Niklas Burfeind2022-12-25
| | | | | | | | | | | | | | | | | | | | Ensure the MAC address for all NanoPi R1 boards is assigned uniquely for each board. The vendor ships the device in two variants; one with and one without eMMC; but both without static mac-addresses. In order to assign both board types unique MAC addresses, fall back on the same method used for the NanoPi R2S and R4S in case the EEPROM chip is not present by generating the board MAC from the SD card CID. [0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1#Hardware_Spec Similar too and based on: commit b5675f500daf ("rockchip: ensure NanoPi R4S has unique MAC address") Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* rockchip: enable watchdog driverKien Truong2022-12-04
| | | | | | | | Enable Synopsys DesignWare watchdog driver for rockchip device Tested on NanoPi R2S Signed-off-by: Kien Truong <duckientruong@gmail.com>
* rockchip: armv8: add CONFIG_ARM64_ERRATUM_1742098John Audia2022-10-30
| | | | | | | | 5.15.76 introduces a new symbol that applies Cortex-A72 SoCs so enable it[1]. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/arm64/Kconfig?id=v5.15.76&id2=v5.15.75 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic configAleksander Jan Bajkowski2022-10-21
| | | | | | | | | | | | | | | | | | | | | | | | | Endianness depends on CPU architecture. CONFIG_CPU_(BIG/LITTLE)_ENDIAN should be enabled on target or subtarget based on SoC architecture. Fixes warning: $ make kernel_oldconfig CONFIG_TARGET=subtarget ... .config:1008:warning: override: CPU_LITTLE_ENDIAN changes choice state .... Summary: - ARC - only the CONFIG_CPU_BIG_ENDIAN symbol is defined for this architeture. If it is disabled then the processor operates in LITTLE_ENDIAN mode (default), - ARM32 - CONFIG_CPU_LITTLE_ENDIAN symbol available since kernel 5.19. This option should be enabled after OpenWRT moves to kernel 6.x. After refreshing the kernel, the symbol disappears, - ARM64 - enabled CONFIG_CPU_LITTLE_ENDIAN, - MIPS - enabled relevant symbols, - POWERPC - enabled CONFIG_CPU_BIG_ENDIAN, - UML - Symbols are not defined for this architecture, - X86 - always little endian. Symbols are not defined for this architecture. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* rockchip: refresh kernel 5.15 configTomas Lara2022-10-02
| | | | | | Refreshed using make kernel oldconfig CONFIG TARGET=rockchip . Signed-off-by: Tomas Lara <tl849670@gmail.com>
* kernel: Move some IOMMU options to genericHauke Mehrtens2022-09-24
| | | | | | | | | | | | This adds some missing IOMMU related options for x86/64 and moves some of them to generic for all targets. On x86 IOMMU_DEFAULT_DMA_LAZY is used by default, on all other platforms IOMMU_DEFAULT_DMA_STRICT is the default. we just follow the default kernel configuration here. Fixes: 8fea4a102ccd ("x86/64: enable IOMMU support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rockchip: ensure NanoPi R4S has unique MAC addressDavid Bauer2022-09-10
| | | | | | | | | | | | | | | | | Ensure the MAC address for all NanoPi R4S boards is assigned unique for each board. FriendlyElec ship two versions of the R4S: The standard as well as the enterprise edition with only the enterprise edition including the EEPROM chip that stores the unique MAC address. In order to assign both board types unique MAC addresses, fall back on the same method used for the NanoPi R2S in case the EEPROM chip is not present by generating the board MAC from the SD card CID. [0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R4S#Differences_Between_R4S_Standard_Version_.26_R4S_Enterprise_Version Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: Activate CONFIG_GPIOLIB in generic configurationHauke Mehrtens2022-08-10
| | | | | | | | All targets expect the malta target already activate the CONFIG_GPIOLIB option. Move it to generic kernel configuration and also activate it for malta. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_INPUT_MISC on all targetsHauke Mehrtens2022-08-10
| | | | | | | | | CONFIG_INPUT_MISC does not do any changes to the kernel image, it only shows some extra kernel configuration options. Activate it on all targets. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rockchip: reliably distribute net interruptsRonny Kotzschmar2022-07-07
| | | | | | | | | On the NanoPI R4S it takes an average of 3..5 seconds for the network devices to appear in '/proc/interrupts'. Wait up to 10 seconds to ensure that the distribution of the interrupts really happens. Signed-off-by: Ronny Kotzschmar <ro.ok@me.com>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-24
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* rockchip: add kernel 5.15 as testingJuergen Wurzer2022-06-18
| | | | | | | | Add kernel 5.15 as testing kernel for the rockchip-armv8 target. Signed-off-by: Juergen Wurzer <wurzer.juergen@gmail.com> [squash commits, update commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip/armv8: enable armv8-CE crypto algorithmsEneas U de Queiroz2022-06-04
| | | | | | | This enables armv8 crypto extensions version of AES, GHASH, and CRC T10 algorithms in the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Powered by cgit, Themed by Ted Yin.