aboutsummaryrefslogtreecommitdiff
path: root/target/linux/realtek
Commit message (Collapse)AuthorAge
* generic: 5.15: backport upstream Aquantia PHY firmware loader patchesChristian Marangi2024-01-26
| | | | | | | | | | | | | | Backport merged upstream patch that adds support for firmware loader from NVMEM or attached filesystem for Aquantia PHYs. Refresh all kernel patches affected by this change. Also update the path for aquantia .ko that got moved to dedicated directory upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [rmilecki: port to 5.15] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* realtek: 5.15: refresh HSGMII patch due to recent PHY backportChristian Marangi2024-01-26
| | | | | | | Refresh HSGMII patch due to recent PHY backport that cause compilation warning for case not handled in phy_interface_num_ports. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: 5.15: backport v6.1 PHY changes required for AquantiaRafał Miłecki2024-01-26
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* realtek: d-link dgs-1210-10p improve sfp supportMichel Thill2024-01-23
| | | | | | | | | | | | | | The current dts file of dgs-1210-10p doesn't support link states for the sfp ports (they are always up). This patch tries to give better support for this and was run tested on dgs-1210-10p. It was heavily inspired from Paul Fertser, RaylynnKnight and the author of dgs-1210-10mp-f.dts https://forum.openwrt.org/t/dlink-dgs-1210-10p-with-glc-t-co-sfp/170928 Signed-off-by: Michel Thill <jmthill@gmail.com>
* rtl838x: debugfs use constants from mach-rtl83xx.hPeter Körner2024-01-15
| | | | | | | The register constants were duplicated in net/dsa/rtl83xx/debugfs.c and asm mach-rtl838x/mach-rtl83xx.h. This commit removes this duplication. Signed-off-by: Peter Körner <git@mazdermind.de>
* rtl838x: fix RTL838X_LED_SW_CTRL definitionPeter Körner2024-01-15
| | | | | | | | According to https://svanheule.net/realtek/maple/register/led_sw_ctrl and also drivers/net/dsa/rtl83xx/debugfs.c LED_SW_CTRL on the RTL838X should be 0xa00c not 0x0128. Please note, that is is 0x0128 on the RTL8390/cypress SOC family. Signed-off-by: Peter Körner <git@mazdermind.de>
* rtl931x: reformat broken indentationPeter Körner2024-01-15
| | | | | | | the given code-format did not correctly express the condition and made the code harder to read then necessary. Signed-off-by: Peter Körner <git@mazdermind.de>
* realtek: rtl838x: add Netgear GS110TUP v1 supportJacob Potter2024-01-13
| | | | | | | | | | | | | | | | | | | | | | The GS110TUP v1 is a managed switch similar to the GS110TPP v1, but with port 10 as SFP instead of RJ-45 and a total budget of 240 watts. Ports 1-4 support 60-watt 802.3bt PoE and ports 5-8 support 30-watt 802.3at. The flash layout of the two switches are identical, and the U-Boot configurations are the same except for having a different magic number, so installation can be done via the same U-Boot method. The following command will be needed to enable the port LEDs as per https://forum.openwrt.org/t/72510/51 : fw_setenv bootcmd "rtk network on; boota" Additionally, port 9 (1000base-T from a separate QSGMII PHY) does not function without this. Port 10 was not tested as no SFP module was available. Signed-off-by: Jacob Potter <jacob@j4cbo.com> [rebase on merged flash layout] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: rtl838x: join Netgear GSxxx flash layoutsSander Vanheule2024-01-13
| | | | | | | | | | Flash layouts for GS108Tv3, GS110TPPv1, GS308Tv1 and GS310TPv1 are almost identical, except for the uimage header magic. Move the flash layout to the common dtsi, and only place the magic value in the device dts files. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* rtl83xx: dsa: reset PVID to 1 instead of 0Harshal Gohel2024-01-09
| | | | | | | | | | | | | | | Before, PVID is reset for all ports and goes out of bounds. Also, PVID is later changed by dsa configuration by `ip link` and `bridge vlan` commands, this does not change the CPU port PVID and CPU PVID stays 0. It does not allow sending packets from OpenWrt to any connected devices unless default configuration is changed This change iterates up to and including cpu_port and sets default PVID to 1. For lan* ports PVID can be configured with `ip link` and `bridge vlan` commands Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl93xx: dsa: Fix 802.1QinQ for trunk portsHarshal Gohel2024-01-09
| | | | | | | | | | | | | | | | | Fix incorrect register value being set for VLAN_PORT_FWD Before, the 0b1111 would be set for the register which means outgoing packets would receive an extra tag, corresponding to the PVID of the port. On untagged ports, this meant outgoing packets with a single tag. On tagged ports, this meant outgoing QinQ packets, where the inner tag was either the PVID of the untagged ingress port, or the already assigned original (single) tag. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl83xx: dsa: Clear duplex bit correctlyHarshal Gohel2024-01-09
| | | | | | | | Without this, luci shows 10M full duplex when there is no link. So explicitly set half duplex and unknown speed. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl930x: Rework per port LED configurationHarshal Gohel2024-01-09
| | | | | | | | | | | | | | | | Use led_setX to determine number of LEDs per port. Introduce macros to calculate register value and shift for particular LED in a particular set. Problem with previous implementation is that it uses is10G status to determine leds per port. However with usxgmii, driver sets 10g, 5g and 2.5g so even though there are only 2 leds per port it selects 4 leds per port This implementation relies on configured led_set node. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl83xx: dsa: Do nothing when vid 0Harshal Gohel2024-01-09
| | | | | | | Following other dsa drivers, vid 0 is no-op Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl83xx: dsa: disable VLAN filtering on CPU portHarshal Gohel2024-01-09
| | | | | | | | | | | | Before driver code - enabled egress filter for cpu and non-cpu ports - enabled ingress filter for non-cpu ports This patch explicitly enables ingress and egress filtering for non-cpu ports and disables ingress and egress filtering for cpu port. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* rtl838x: Enable jumbo frames by defaultHarshal Gohel2024-01-09
| | | | | | | | Increase DEFAULT_MTU and max-mtu size Increase truncate length on rx of jumbo frame Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
* realtek: correct typo in port numberingMichael 'ASAP' Weinrich2024-01-05
| | | | | | Port 10 was incorrectly labelled as nonexistent port 0. Signed-off-by: Michael 'ASAP' Weinrich <michael@a5ap.net>
* realtek: fix network connectivity on GS750EMichael 'ASAP' Weinrich2024-01-05
| | | | | | | | | | | Currently OpenWRT does not know how to properly reset the network switch. This would result in a switch that seemed to come up properly but was unable to handle any traffic. Presumably something earlier in the boot chain is configuring a part of the switch that gets wiped out when its reset. For now comment out the reset GPIO entry in the device tree until the driver better supports bringing up the switch after a reset. Signed-off-by: Michael 'ASAP' Weinrich <michael@a5ap.net>
* treewide: use ethtool_puts instead of memcpyRosen Penev2024-01-05
| | | | | | The former is a safer and more readable version. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* realtek: Use hex for "soc" identifier in debugfsPascal Ernster2023-12-31
| | | | | | | | | The upper 16 bits of the 32 bit value encode the SoC model in BCD notation (for example 0x83806800 on a Netgear GS108Tv3 with an RTL8380M), so it makes more sense to output the value in hex notation than in decimal notation. Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: fix addresses in DT node namesRosen Penev2023-12-30
| | | | | | | | | Mostly wrong address format, one missing address, and one spurious address suffix. Signed-off-by: Rosen Penev <rosenp@gmail.com> [amend commit message] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: 5.15: rtl93xx: support 100BASE-T and 10BASE-T MAC modesTobias Schramm2023-12-24
| | | | | | | | | The MAC embedded in rtl93xx switch SoCs needs different mac mode bits set to support 10BaseT and 100BaseT link modes. Set them accordingly. This change has been tested on a ZyXEL XGS1250-12. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* kernel: bump 5.15 to 5.15.143John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.143 Removed upstreamed: generic/backport-5.15/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-5.15/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.143&id=00beca907a7be61da935bb687f9601420fc5f8a8 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* realtek: Clean up and standardize realtek-poe supportRaylynn Knight2023-12-13
| | | | | | | | | | | | | | | | This patch cleans up and standardizes realtek-poe support for realtek based switches that have supported PoE ports. The power output of switches supported by realtek-poe package can be configured in the 02_network ucidef_set_poe() function. This was missed when some PoE capable switches supported by realtek-poe were added. The realtek-poe package at one point replaced a lua-rs232 based script and some devices were not updated to use the realtek-poe package. Consistently add realtek-poe package to DEVICE_PACKAGES for switches with supported PoE. Signed-off-by: Raylynn Knight <rayknight@me.com>
* kernel: bump 5.15 to 5.15.140John Audia2023-11-29
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.140 Removed upstreamed: mvebu/patches-5.15/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.140&id=06d320ca170b4e59bb261e2ce3ffe84e9154d42b Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* realtek: convert to nvmem-layoutRosen Penev2023-11-24
| | | | | | nvmem-cells is deprecated. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* realtek: add support for TP-Link T1600G-28TS v3Andreas Böhler2023-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an RTL8382-based switch with 24 copper ports + 4 SFP ports Specifications: --------------- * SoC: Realtek RTL8382M * Flash: 32 MiB SPI flash * RAM: 256 MiB * Ethernet: 24x 10/100/1000 Mbps * Buttons: 1x "Reset" button * UART: 1x serial header, unpopulated * SFP: 4 SFP ports Works: ------ - (24) RJ-45 ethernet ports - Switch functions - Buttons - Sys LED on front panel (no port LEDs) Not yet enabled: ---------------- - Port LEDs (no driver for RTL8231 in this mode) - SFP cages (no driver for PHY) Install via web interface: ------------------------- Not supported at this time. Install via serial console/tftp: -------------------------------- The U-Boot firmware drops to a TP-Link specific "BOOTUTIL" shell at 38400 baud. There is no known way to exit out of this shell, and no way to do anything useful. Ideally, one would trick the bootloader into flashing the sysupgrade image first. However, if the image exceeds 6MiB in size, it will not work. To install OpenWRT: Prepare a tftp server with: 1. server address: 192.168.0.146 2. the image as: "uImage.img" Power on device, and stop boot by pressing any key. Once the shell is active: 1. Ground out the CLK (pin 16) of the ROM (U6) 2. Select option "3. Start" 3. Bootloader notes that "The kernel has been damaged!" 4. Release CLK as soon as bootloader thinks image is corrupted. 5. Bootloader enters automatic recovery -- details printed on console 6. Watch as the bootloader flashes and boots OpenWRT. Blind install via tftp: ----------------------- This method works when it's not feasible to install a serial header. Prepare a tftp server with: 1. server address: 192.168.0.146 2. the image as: "uImage.img" 3. Watch network traffic (tcpdump or wireshark works) 4. Power on the device. 5. Wait 1-2 seconds then ground out the CLK (pin 16) of the ROM (U6) 6. When 192.168.0.30 makes tftp requests, release pin 16 7. Wait 2-3 minutes for device to auto-flash and boot OpenWRT Signed-off-by: Andreas Böhler <dev@aboehler.at>
* realtek: add support for HPE 1920-8g-poe+ (65W)Kevin Jilissen2023-10-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware information: --------------------- - RTL8380 SoC - 8 Gigabit RJ45 PoE ports (built-in RTL8218B) - 2 SFP ports (built-in SerDes) - RJ45 RS232 port on front panel - 32 MiB NOR Flash - 128 MiB DDR3 DRAM - PT7A7514 watchdog - PoE chip - Fanless Known issues: --------------------- - PoE LEDs are uncontrolled. (Manual taken from f2f09bc) Booting initramfs image: ------------------------ - Prepare a FTP or TFTP server serving the OpenWrt initramfs image and connect the server to a switch port. - Connect to the console port of the device and enter the extended boot menu by typing Ctrl+B when prompted. - Choose the menu option "<3> Enter Ethernet SubMenu". - Set network parameters via the option "<5> Modify Ethernet Parameter". Enter the FTP/TFTP filename as "Load File Name" ("Target File Name" can be left blank, it is not required for booting from RAM). Note that the configuration is saved on flash, so it only needs to be done once. - Select "<1> Download Application Program To SDRAM And Run". Initial installation: --------------------- - Boot an initramfs image as described above, then use sysupgrade to install OpenWrt permanently. After initial installation, the bootloader needs to be configured to load the correct image file - Enter the extended boot menu again and choose "<4> File Control", then select "<2> Set Application File type". - Enter the number of the file "openwrt-kernel.bin" (should be 1), and use the option "<1> +Main" to select it as boot image. - Choose "<0> Exit To Main Menu" and then "<1> Boot System". NOTE: The bootloader on these devices can only boot from the VFS filesystem which normally spans most of the flash. With OpenWrt, only the first part of the firmware partition contains a valid filesystem, the rest is used for rootfs. As the bootloader does not know about this, you must not do any file operations in the bootloader, as this may corrupt the OpenWrt installation (selecting the boot image is an exception, as it only stores a flag in the bootloader data, but doesn't write to the filesystem). Example PoE config file (/etc/config/poe): --------------------- config global option budget '65' config port option enable '1' option id '1' option name 'lan8' option poe_plus '1' option priority '2' config port option enable '1' option id '2' option name 'lan7' option poe_plus '1' option priority '2' config port option enable '1' option id '3' option name 'lan6' option poe_plus '1' option priority '2' config port option enable '1' option id '4' option name 'lan5' option poe_plus '1' option priority '2' config port option enable '1' option id '5' option name 'lan4' option poe_plus '1' option priority '2' config port option enable '1' option id '6' option name 'lan3' option poe_plus '1' option priority '2' config port option enable '1' option id '7' option name 'lan2' option poe_plus '1' option priority '2' config port option enable '1' option id '8' option name 'lan1' option poe_plus '1' option priority '2' Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
* realtek: rename hpe,1920-8g-poe to match hardwareKevin Jilissen2023-10-09
| | | | | | | | | | | | | There are two hardware models of the HPE 1920-8g-poe switch. The version currently in the repository is the model with a PoE budget of 180W. In preparation of the addition of the 65W model, the existing model is renamed to clarify the hardware version it targets. As suggested by Pawel, the 'SUPPORTED_DEVICES' includes the old target name to enable an upgrade path of builds with the old name. Suggested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Kevin Jilissen <info@kevinjilissen.nl>
* rtl83xx: fix STP by trapping BPDUsRudolf Vesely2023-10-04
| | | | | | | | | | | Fix Spanning Tree Protocol (STP) by changing COPY2CPU which currently makes switch to ignore Bridge Protocol Data Units (BPDUs). Tested on Zyxel GS1900-8, 24 and 48. Signed-off-by: Rudolf Vesely <i@rudolfvesely.com> [ improve commit description and add new line in different sections ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* realtek: 5.15: rtl93xx: support 2500baseT and 5000baseT on USXGMII linksTobias Schramm2023-10-03
| | | | | | | | | | | | | | | | | The USXGMII implementation of Realtek switches can not only support 10GbE but also 2.5Gb and 5Gb on top of the usual data rates. Mark those as supported to allow them to be negotiated. This change has been tested on a ZyXEL XGS1250-12 with the following link partners: - NWA50AX Pro (2.5Gb) - RTL8152 USB NIC (2.5Gb) - AQC111 USB NIC (2.5Gb & 5Gb) Gbit and 10GbE has also been tested to still work fine with a variety of devices. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* rtl93xx: fix condition intended to only select internal serdes portsPeter Körner2023-10-03
| | | | | | | | | | | | | This condition was introduced in commit 51c8f7661244 ("realtek: Improve MAC config handling for all SoCs") to correctly report the speed of the internal serdes ports as 10G, but instead makes all ports read 10G because the or-operator should have been an and-operator. Fixes: #9953 Fixes: 51c8f7661244 ("realtek: Improve MAC config handling for all SoCs") Signed-off-by: Peter Körner <git@mazdermind.de> [ wrap comment to 72 column and improve commit ref ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: add patch for GPON-ONU-34-20BI quirkChristian Marangi2023-09-29
| | | | | | Backport patch merged upstream adding quirk for SFP GPON-ONU-34-20BI. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 5.15 to 5.15.132John Audia2023-09-20
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.132 Removed upstreamed: bcm53xx/patches-5.15/037-v6.6-0006-ARM-dts-BCM53573-Add-cells-sizes-to-PCIe-node.patch[1] bcm53xx/patches-5.15/037-v6.6-0007-ARM-dts-BCM53573-Use-updated-spi-gpio-binding-proper.patch[2] bcm53xx/patches-5.15/037-v6.6-0008-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=b35f3ca1877e024887df205ede952863d65dad36 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=2840d9b9c8750be270fb1153ccd5b983cbb5d592 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=f086e859ddc252c32f0438edff241859c0f022ce Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: sync MediaTek Ethernet driver with upstreamDaniel Golle2023-08-28
| | | | | | | Import commits from upstream Linux replacing some downstream patches. Move accepted patches from pending-{5.15,6.1} to backport-{5.15,6.1}. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.125John Audia2023-08-09
| | | | | | | | | | 1. Add new symbols to generic config 2. Bump kernel Changelog: https://lore.kernel.org/stable/2023080818-groin-gradient-a031@gregkh/ All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.124John Audia2023-08-09
| | | | | | | | | | | | | Changelog: https://lore.kernel.org/stable/2023080341-curliness-salary-4158@gregkh/ 1. Needed to make a change to to package/kernel/linux/modules/netsupport.mk due to upstream moving vxlan to its own directory[1]. @john-tho suggested using the the 6.1 xvlan FILES to circumvent. 2. All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.124&id=77396fa9096abdbfbb87d63e73ad44d5621cf103 Signed-off-by: John Audia <therealgraysky@proton.me>
* realtek: add support for HPE 1920-8g-poe+Pawel Dembicki2023-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware information: --------------------- - RTL8380 SoC - 8 Gigabit RJ45 PoE ports (built-in RTL8218B) - 2 SFP ports (built-in SerDes) - RJ45 RS232 port on front panel - 32 MiB NOR Flash - 128 MiB DDR3 DRAM - PT7A7514 watchdog - PoE chips: Nuvoton M0516LDE + BCM59121 Known issues: --------------------- - PoE LEDs are uncontrolled. (Manual taken from f2f09bc00280) Booting initramfs image: ------------------------ - Prepare a FTP or TFTP server serving the OpenWrt initramfs image and connect the server to a switch port. - Connect to the console port of the device and enter the extended boot menu by typing Ctrl+B when prompted. - Choose the menu option "<3> Enter Ethernet SubMenu". - Set network parameters via the option "<5> Modify Ethernet Parameter". Enter the FTP/TFTP filename as "Load File Name" ("Target File Name" can be left blank, it is not required for booting from RAM). Note that the configuration is saved on flash, so it only needs to be done once. - Select "<1> Download Application Program To SDRAM And Run". Initial installation: --------------------- - Boot an initramfs image as described above, then use sysupgrade to install OpenWrt permanently. After initial installation, the bootloader needs to be configured to load the correct image file - Enter the extended boot menu again and choose "<4> File Control", then select "<2> Set Application File type". - Enter the number of the file "openwrt-kernel.bin" (should be 1), and use the option "<1> +Main" to select it as boot image. - Choose "<0> Exit To Main Menu" and then "<1> Boot System". NOTE: The bootloader on these devices can only boot from the VFS filesystem which normally spans most of the flash. With OpenWrt, only the first part of the firmware partition contains a valid filesystem, the rest is used for rootfs. As the bootloader does not know about this, you must not do any file operations in the bootloader, as this may corrupt the OpenWrt installation (selecting the boot image is an exception, as it only stores a flag in the bootloader data, but doesn't write to the filesystem). Example PoE config file (/etc/config/poe): --------------------- config global option budget '180' config port option enable '1' option id '1' option name 'lan8' option poe_plus '1' option priority '2' config port option enable '1' option id '2' option name 'lan7' option poe_plus '1' option priority '2' config port option enable '1' option id '3' option name 'lan6' option poe_plus '1' option priority '2' config port option enable '1' option id '4' option name 'lan5' option poe_plus '1' option priority '2' config port option enable '1' option id '5' option name 'lan4' option poe_plus '1' option priority '2' config port option enable '1' option id '6' option name 'lan3' option poe_plus '1' option priority '2' config port option enable '1' option id '7' option name 'lan2' option poe_plus '1' option priority '2' config port option enable '1' option id '8' option name 'lan1' option poe_plus '1' option priority '2' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* realtek: Use MDIO_* constants from <linux/mdio.h>Pascal Ernster2023-07-01
| | | | | | | | | | | | | | | | | | | | To improve code readability in drivers/net/phy/rtl83xx-phy.c, replace constants MMD_AN and MMD_VEND2 from drivers/net/phy/rtl83xx-phy.h with MDIO_MMD_AN and MDIO_MMD_VEND2 from <linux/mdio.h>. Also, replace BIT(0) with MDIO_EEE_2_5GT, BIT(1) with MDIO_EEE_100TX, BIT(2) with MDIO_EEE_1000T, BIT(9) with MDIO_AN_CTRL1_RESTART, BIT(12) with MDIO_AN_CTRL1_ENABLE, 32 with MDIO_AN_10GBT_CTRL, 60 with MDIO_AN_EEE_ADV, and 62 with MDIO_AN_EEE_ADV2 from <linux/mdio.h>. Suggested-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: Use ADVERTISE_* and MII_PHYSID* from <linux/mii.h>Pascal Ernster2023-07-01
| | | | | | | | | | Replace BIT(x) and numerical values in drivers/net/phy/rtl83xx-phy.c with constants from <linux/mii.h> to improve code readability. To make reviewing easier, this commit only addresses ADVERTISE_* and MII_PHYSID* constants. Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: Use MII_BMCR and BMCR_* constants from <linux/mii.h>Pascal Ernster2023-07-01
| | | | | | | | | | | | Replace numerical values, BIT(x) and (1 << x) in drivers/net/phy/rtl83xx-phy.c with constants from <linux/mii.h> to improve code readability. To make reviewing easier, this commit only addresses MII_BMCR and BMCR_* constants. Suggested-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* kernel: bump 5.15 to 5.15.118John Audia2023-06-23
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: backport initial LEDs hw control supportChristian Marangi2023-06-06
| | | | | | | | | | | | Backport initial LEDs hw control support. Currently this is limited to only rx/tx and link events for the netdev trigger but the API got accepted and the additional modes are working on and will be backported later. Refresh every patch and add the additional config flag for QCA8K new LEDs support. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* realtek: eth: Do not write directly to dev->addrOlliver Schinagl2023-06-03
| | | | | | | | | One is never to write to dev->addr directly. In 6.1 it will be a const and with the newly enabled WERROR, we get a failing grade. Lets fix this ahead of time. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* realtek: Add missing headersOlliver Schinagl2023-06-03
| | | | | | | We are missing a bunch of headers, which trigger errors on 6.1, probably due to changed header-in-header dependencies. Best add them now. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* kernel: bump 5.15 to 5.15.113John Audia2023-05-26
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: mt7530: backport support for the MT7988 built-in switchDaniel Golle2023-05-23
| | | | | | | | | | | | | | | | Backport commits adding support for the MT7988 built-in switch to the mt7530 driver. This change results in the Kconfig symbol NET_DSA_MT7530 to be extended by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530) and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in switch of the MT7988 SoC). Select NET_DSA_MT7530_MDIO for all targets previously selecting NET_DSA_MT7530, with the exception of mediatek/filogic which also selects NET_DSA_MT7530_MMIO. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport Motorcomm YT8521/YT8531 supportTianling Shen2023-05-18
| | | | | | It will be used on NanoPi R2C and OrangePi R1 Plus LTS board. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* treewide: remove files for building 5.10 kernelNick Hainke2023-05-12
| | | | | | | | | | | All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke <vincent@systemli.org>
* realtek: 5.15: replace fallthrough comment for rtl838x ethernet driverChristian Marangi2023-05-12
| | | | | | | | | | | | | | Replace fallthrough comment with fallthrough macro for rtl838x ethernet driver. Fix compilarion warning: drivers/net/ethernet/rtl838x_eth.c: In function 'rtl930x_mdio_reset': drivers/net/ethernet/rtl838x_eth.c:1959:43: error: this statement may fall through [-Werror=implicit-fallthrough=] 1959 | private_poll_mask |= BIT(i); drivers/net/ethernet/rtl838x_eth.c:1961:17: note: here 1961 | case PHY_INTERFACE_MODE_USXGMII: | ^~~~ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.