aboutsummaryrefslogtreecommitdiff
path: root/target/linux/ramips/dts/mt7628an_xiaomi_mi-ra75.dts
Commit message (Collapse)AuthorAge
* ramips: fix label-mac for Xiaomi RA75David Bauer2023-12-28
| | | | | | | The label-mac of the repeater is the address used on the 2.4 GHz radio, not the ethernet MAC. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: convert mt76 PCIe NIC EEPROM to NVMEM format for legacy SoCsShiji Yang2023-10-17
| | | | | | | | | | This patch converts MT761{0,2,3} PCIe WiFi calibration data to NVMEM format for legacy Ralink SoCs (MT7620 and Mt7628). The EEPROM size of the MT7610 and MT7612 is 0x200. there are only three devices uses MT7613 NIC, ASUS RT-AC1200 V2, COMFAST CF-WR758AC V2 and Keenetic KN-1613. The EEPROM size of them is 0x4da8. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7628 EEPROM to NVMEM formatShiji Yang2023-10-17
| | | | | | | This patch converts MT7628 WiFi calibration data to NVMEM format. The EEPROM size is 0x400. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix DTS EEPROM property for some MT7628 devicesShiji Yang2023-10-17
| | | | | | | The MT7628 integrated wireless is driven by `mt76`, so the right EEPROM property name is `mediatek,mtd-eeprom`. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add Xiaomi RA75 red signal ledOleksandr Zharov2023-04-17
| | | | | | | | | | | | | | | | | RA75 has 5 physical LEDs under 2 indicators, mixed with light pipes: Indicator "System": GPIO0: blue GPIO2: amber Indicator "Signal": GPIO44: blue GPIO37: amber GPIO46: red All except GPIO46 were already added by Jo Deisenhofer. GPIO46 is used for UART1 by default, so it needs additional pin control change in devicetree to be operational. Verified on my RA75. Signed-off-by: Oleksandr Zharov <alex.zeed@gmail.com>
* ramips: add support for xiaomi RA75 Range ExtenderJo Deisenhofer2023-01-14
This device is a 'Range extender' variant of the Xiaomi 4A router. Its identical to the 100m non-intl/chinese version as much as it can run the same firmware, differences being form factor, LEDs, WPS button and one 100M port only. The stock firmware differs significantly, being 'app managed only'. Device specification -------------------- SoC: MT7628DAN MIPS_24KEc@580MHz 2.4G-n 2x2 WiFi: MT7612EN 5G-ac 80MHz 2T2R Flash: 16MB W25Q128BV DRAM: 64MB built-in SoC Switch: built-in SoC Ethernet: 1x10/100 Mbps USB: None Antennas: 2 x external, non-detachable LEDs: 2 programmable blue/amber Buttons: WPS and reset (hidden) Housing: Range Extender / Wall wart Serial: 115200,8n1 MAC Addresses ------------- All 3 MACs are read from flash and identical to stock. Label MAC is WIFI 2G Installation ------------ No HTML UI on this device, serial console only. The serial connector is unpopulated but standard size and clearly marked. Flash from the U-Boot shell at boot by choosing (2) and flashing the sysupgrade file via tftp. Recovery/Debricking procedures of the xiaomi 4A and variants should work, but there currently is no official source for the stock firmware. Signed-off-by: Jo Deisenhofer <jo.deisenhofer@gmail.com>