aboutsummaryrefslogtreecommitdiff
path: root/target/linux/ramips/dts/mt7621_netgear_eax12.dts
Commit message (Collapse)AuthorAge
* ramips: clean up useless dts partition labelsShiji Yang2024-02-21
| | | | | | | | | | The previous NVMEM eeprom conversions[1][2] left a lot of partition labels that were no longer used. They can be removed now. [1] https://github.com/openwrt/openwrt/pull/13584 [2] https://github.com/openwrt/openwrt/pull/13587 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert to new LED color/function format where possibleChristian Marangi2024-02-07
| | | | | | | | Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: mt7621: convert MT7915 EEPROM to NVMEM formatShiji Yang2024-01-17
| | | | | | | | | | | | | Some MT7915 calibration data consists of two parts. The first part "eeprom" size is 0xe00. The second part "precal" size is 0x19c10. Though some devices may not have precal data, it's better to assume that precal data exists as no users/developers confirm it. On the other hand, some devices definitely do not contain precal data because the EEPROM partition size is smaller than the precal NVMEM cell size. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* Revert "ramips: convert MT7915 EEPROM to NVMEM format"Shiji Yang2023-10-17
| | | | | | | | | | | | | | | | Some MT7915 devices need to load the second part of the eeprom to work properly. The mt76 driver is not yet ready to read the pre-cal data via the NVMEM cell. Therefore, partially revert commit to fix the device probe issue on some devices. P.S. Except for D-Link and Ubnt devices, It is still uncertain whether pre-cal data is required for other devices in the patch. This partially reverts commit 9ac891f8c44124e931c15f1257347cd8ba311a19. Fixes: https://github.com/openwrt/openwrt/issues/13700 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: convert MT7915 EEPROM to NVMEM formatShiji Yang2023-10-09
| | | | | | | This patch converts MT7915 WiFi calibration data to NVMEM format. The EEPROM size is 0xe00. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add support for Netgear EAX12 seriesWenli Looi2023-07-01
Netgear EAX12, EAX11v2, EAX15v2 are wall-plug 802.11ax (Wi-Fi 6) extenders that share the SoC, WiFi chip, and image format with the WAX202. Specifications: * MT7621, 256 MiB RAM, 128 MiB NAND * MT7915: 2.4/5 GHz 2x2 802.11ax (DBDC) * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) All LEDs and buttons appear to work without state_default. Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References in GPL source: https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz * target/linux/ramips/dts/mt7621-rfb-ax-nand.dts DTS file for this device. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>