aboutsummaryrefslogtreecommitdiff
path: root/target/linux/qualcommax
Commit message (Collapse)AuthorAge
* qualcommax: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | nvmem-cells is deprecated Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 6.1 to 6.1.63John Audia2023-11-23
| | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.63 Removed upstreamed: generic/backport-6.1/815-v6.6-2-leds-turris-omnia-Drop-unnecessary-mutex-locking.patch generic/backport-6.1/815-v6.7-1-leds-turris-omnia-Do-not-use-SMBUS-calls.patch ixp4xx/patches-6.1/0007-watchdog-ixp4xx-Make-sure-restart-always-works.patch Manually rebased: bcm27xx/patches-6.1/950-0606-hwrng-bcm2835-sleep-more-intelligently.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=7d0e60e4ff840e97fb18afb2a7344442c10a6fdf 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=63cdeb20ee3bfef820b045b8d3b8395f9f815a74 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=8803da01fe1b4ca3d37745283f7e73c6c2558c0c Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* qualcommax: add addresses to DP nodesRobert Marko2023-11-18
| | | | | | | | | | | | | | | | | DP nodes live under the soc node, and since soc is a simple bus it requires node adresses to be present. So, simply add the node addreses to avoid the following dtc warning: Warning (unit_address_vs_reg): /soc/dp1: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/dp2: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/dp3: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/dp4: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/dp5: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/dp6: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/dp5-syn: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/dp6-syn: node has a reg or ranges property, but no unit name Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: fix line endings in ESS dt-bindingsRobert Marko2023-11-15
| | | | | | | It seems that ESS dt-bindings somehow ended up with Windows line endings, this is obviously incorrect, so lets convert it to UNIX endings. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq807x: fix typo in WAX630 for switch lan bmpChristian Marangi2023-11-15
| | | | | | | | In fixing ipq8074 WAX630 dts, there was a typo in the switch lan bmp. Fix it to fix compilarion error. Fixes: f3cd4bfb7f69 ("ipq807x: fix multiple error on ESS switch port define") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq807x: fix multiple error on ESS switch port defineChristian Marangi2023-11-15
| | | | | | | | | | | Fix multiple error on ESS switch port define. - Fix wrong switch CPU and WAN bmp define. (many times wan port are actually set in lan mask and lan port in wan mask) - Renumber phyinfo port, use port_id instead of phy_address as it doesn't make sense using that for port enumeration - Drop additional port for devices that have them not connected. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* qualcommax: move switch tick mode setting to ESS DTSIRobert Marko2023-11-14
| | | | | | | | Every board in qualcommax is using the same BM and TM switch tick modes, so instead of specifying them in each board lets just set them in the ESS DTSI directly. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: use defines for MAC mode settingRobert Marko2023-11-14
| | | | | | | | | | Now that we have the MAC modes defined in DT bindings, lets replace all of the raw hex values with defines. While we are here, we can drop the disabled UNIPHY-s as that is the default value in the ESS DTSI. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: set default switch MAC modesRobert Marko2023-11-14
| | | | | | | | | | Every board that has the switch enabled needs to have MAC modes defined for all 3 UNIPHY instances. So, instead of having to at least put the disabled MAC mode for UNIPHY-s let disable them by default and then boards can override it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: add bindings for MAC modesRobert Marko2023-11-14
| | | | | | | | | | Since every board needs to define the correct MAC modes, it makes sense to document the allowed hex values with a humanly readable name. So, lets document all of the allowed MAC modes from SSDK 12.4 as bindings, so later we can replace all of the hex values in DTS-es with these. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qca-ssdk: fix unsupported scenario with PORT1 not declared in switch bmpChristian Marangi2023-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 947b44d ("ipq807x: fix wrong define for LAN and WAN ess mask") started fixing wrong switch_lan_bmp that defined lan there weren't actually present. This displayed a fragility in the malibu phy init code in qca-ssdk. Add patch to fix this. Also update each DTS with the new required property if needed. The new binding malibu_phy_start_addr is required with devices that place the malibu first PHY referring port1 on a different PHY addres than 0. The most common configuration is 0 but some device (for example Qnap 301W) place the malibu PHY at an offset to address 16. Refer to ipq8074-ess dtsi for extensive description on how to derive this value. Quoting the patch detailed description: The usage of first_phy_addr is EXTREMELY FRAGILE and results in dangerous results if the OEM (or anyone that by chance try to implement things in a logical manner) deviates from the default values from the "magical template". To be in more details. With QSDK 12.4, some tweaks were done to improve autoneg and now on every call of port status, the phydev is tried to add. This resulted in the call and log spam of an error with ports that are actually not present on the system with qsdk reporting phydev is NULL. This itself is not an error and printing the error is correct. What is actually an error from ages is setting generic bitmap reporting presence of port that are actually not present. This is very common on OEM where the switch_lan_bmp is always a variant of 0x1e (that on bitmap results in PORT1 PORT2 PORT3 PORT4 present) or 0x3e (PORT1 PORT2 PORT3 PORT4 PORT5). Reality is that many device are used as AP with one LAN port or one WAN port. (or even exotic configuration with PORT1 not present and PORT2 PORT3 PORT4 present (Xiaomi 3600) With this finding one can say... ok nice, then lets update the DT and set the correct bitmap... Again world is a bad place and reality is that this cause wonderful regression in some case of by extreme luck the first ever connected port working and the rest of the switch dead. The problem has been bisected to all the device that doesn't have the PORT1 declared in any of the bitmap. With this prefaction in mind, on to the REAL problem. malibu_phy_hw_init FOR SOME REASON, set a global variable first_phy_addr to the first detected PHY addr that coincidentally is always PORT1. PORT1 addr is 0x0. The entire code in malibu_phy use this variable to derive the phy addrs in some function. Declaring a bitmap where the PORT1 is missing (or worse PORT4 the only one connected) result in first_phy_addr set to 1 or whatever phy addr is detected first setting wrong value all over the init stage. To fix this, introduce a new binding malibu_first_phy_addr to manually declare the first phy that the malibu PHY driver should use and permit to detach it from port bmp detection. The legacy detection is kept for compatibility reason. Fixes: #13945 Fixes: 947b44d9ae17 ("ipq807x: fix wrong define for LAN and WAN ess mask") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Robert Marko <robimarko@gmail.com> # Qnap 301W Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq807x: fix wrong define for LAN and WAN ess maskChristian Marangi2023-11-10
| | | | | | | | | | | | | | | switch_lan_bmp and switch_wan_bmp have wrong values and now cause problems with the new version of the qca-ssdk. Fix the wrong entry and drop the redundant switch_cpu_bmp. Also introduce some convenient define to better understand values in this map. Fixes: eea264feadcf ("kernel: qca-ssdk: update to 12.4") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Robert Marko <robimarko@gmail.com> # Dynalink AX3600 and Qnap 301W Reviewed by: Robert Marko <robimarko@gmail.com>
* ipq807x: add support for Yuncore AX880Isaev Ruslan2023-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPECIFICATION: - Chipset: IPQ8072A +QCN5054+QCN5024+QCA8081*2 - Flash NOR-8MB AND NAND-128MB - RAM 1Gb DDR - IEEE 802.11: 802.11ax/ac/b/g/n - 4*4 2.4G Wi-Fi standard 802.11b/g/n/ax - 4*4 5.8G Wi-Fi Standard 802.11 a/n/ac/ax - 2x 1 Gbps Ethernet (QCA8081) with 802.3at PoE input support - 1x Reset - 1x Bluetooth(optional) - 1x DC Port 12V 3A - 4x Antenna IPEX Connector, 3dBi omni antennas - Data Rate: 3657Mbps ( 2.4G: 1182Mbps (11ax 4x4); 5.8G: 2475Mbps (11ax 4x4)) - RF Power: 2.4g ≤ 20dBm; 5.8g ≤ 19dBm - LED light: Sys; 5.8G wifi; 2.4G wifi; WAN; LAN - Max Power Consumption: ≤ 22W - Size: 198mm * 198mm * 41.02mm BACKUP YOUR STOCK FIRMWARE: ``` export device=ax880 mkdir -p /tmp/fw_dump_$device cd /tmp/fw_dump_$device dmesg > dmesg_$device.log dtc -I fs /sys/firmware/devicetree/base > $device.dts cat /proc/device-tree/model > model cat /proc/mtd > proc_mtd while read p; do mtd_dev=$(echo $p | cut -d: -f1) echo $mtd_dev dd if=/dev/$mtd_dev of=$mtd_dev done < proc_mtd md5sum * > md5sum.log tar -cvzf ../$device.tar.gz . export sum=$(md5sum /tmp/$device.tar.gz | cut -d' ' -f1) mv ../$device.tar.gz /tmp/${device}_${sum}.tar.gz echo fw backup saved to: /tmp/${device}_${sum}.tar.gz ``` Upload your backup via tftp to the safe place. INSTALLATION: 1. stock firmware web ui Rename factory.bin fw image file to factory.ubin. Flash this image like ordinary stock fw upgrade. 2. stock firmware telnet method Enter telnet cli (login: root, password: 476t*_f0%g09y) and upload factory.bin fw image and rename it to factory.ubin `cd /tmp && wget <your_web_server_ip>/factory.ubin` `sysupgrade factory.ubin 3. initramfs method Put openwrt-ipq807x-generic-yuncore_ax880-initramfs-uImage.itb to your TFTP server and rename it to ax880.initram Enable serial console and enter to the u-boot cli. Exec these commands: `tftpboot <your_tftp_server_ip>:ax880.initram` `dhcp` When downloading is finished: `bootm` After booting the device, you need to upload to the device factory.ubi fw image. ``` cd /tmp && wget <your_web_server_ip>/factory.ubi` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f factory.ubi ubiformat /dev/${rootfs_1} -y -f factory.ubi reboot ``` 4. u-boot factory.ubi image method Put openwrt-ipq807x-generic-yuncore_ax880-squashfs-factory.ubi to your TFTP server and rename it to ax880.ubi Enter u-boot cli and exec these commands: `tftpboot <your_tftp_server_ip>:ax880.ubi` `dhcp` After downloading is finished: `flash rootfs` `flash rootfs_1` `reset` 5. u-boot factory.bin method Put openwrt-ipq807x-generic-yuncore_ax880-squashfs-factory.bin to your TFTP server and rename it to ax880.bin Enter u-boot cli and exec these commands: `tftpboot <your_tftp_server_ip>:ax880.bin` `dhcp` After downloading is finished: `imgaddr=$fileaddr && nand device 0` Erase rootfs memory: `nand erase 0x00000000 0x03400000` Write rootfs: `nand write $fileaddr 0x00000000 $filesize` Erase rootfs_1 memory: `nand erase 0x3c00000 0x3400000` Write rootfs_1 `nand write $fileaddr 0x3c00000 $filesize` `reset` STOCK FIRMWARE RECOVERY: Boot initramfs image. Upload your rootfs mtd partition to the device using scp or download it from the device using wget. Enter device ssh cli and exec: ``` cd /tmp && wget <your_web_server_ip>/mtd21` export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1) export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1) ubiformat /dev/${rootfs} -y -f /tmp/mtd21 ubiformat /dev/${rootfs_1} -y -f /tmp/mtd21 reboot ``` Signed-off-by: Isaev Ruslan <legale.legale@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* qualcommax: backport missing SMEM ID-s for SSDKRobert Marko2023-11-09
| | | | | | | | SSDK has switched to using the upstream SMEM helper to get the SoC ID and then look it up in the QCA SMEM ID header, so we need these in order for SSDK to compile as they are currently undefined. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: refresh patchesRobert Marko2023-11-08
| | | | | | | It seems that patches were not refreshed during last kernel bump, so lets refresh them. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: fixup patch numberingRobert Marko2023-11-08
| | | | | | | It seems that I forgot one zero in the patch numbering while marking these as backports, so lets fix it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq807x: move subtarget specific kernel optionsRobert Marko2023-11-02
| | | | | | | | | | | | | | Currently, qualcommax target contains the full kernel config for the ipq807x subtarget, but since I am working on ipq60xx as well it makes sense to split out the ipq807x specific kernel options to subtarget config. ipq60xx will use the same approach and use subtarget config. Should result in the same end kernel config, verified by comparing the generated kernel .config. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: only build initramfs if CONFIG_TARGET_ROOTFS_INITRAMFS is setFlorian Maurer2023-10-29
| | | | | | This makes it possible to build the ipq807x netgear-wax218 without initramfs - which is required for downstream projects (gluon) Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* qualcommax: mark upstreamed patches as suchRobert Marko2023-10-29
| | | | | | The GPLL fixes were merged upstream, so lets mark them as such. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq807x: add support for Netgear WAX630Kristian Skramstad2023-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ``` Specifications: * CPU: Qualcomm IPQ8074A, SoC Version: 2.0, Quad core 1651 MHz * RAM: 1 GiB of DDR3 466 MHz * Flash: NAND 512 MiB (Winbond W29N04GZ) * 6 RGB LEDs: Power, LAN1, LAN2, 2.4GHz, 5GHz H and 5GHz L * UART: One 4-pin populated header next to the heatsink and a chip. GND RXD TXD, beginning from the external antennas. 115200n8. Lan: * One 100/1000/2.5GBASE-T Gigabit Ethernet 802.3bt/at * One 100/1000 Gigabit Ethernet Wlan: * 4x4 in 2.4GHz : 802.11b/g/n/ax * 4x4 in 5.0GHz L: 802.11a/n/ac/ax * 4x4 in 5.0GHz H: 802.11a/n/ac/ax * OFDM and OFDMA * Bidir and MU-MIMO * Internal antenna 2.86/4.41/4.98 dBi (2.4GHz/5GHz L/5GHz H) Power: * 802.3bt/at 30.1W * DC 12V/3.5A Mounting: Wall and ceiling ``` ``` 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect to the console on the AP, and connect the LAN port to your LAN 3. Stop auto boot to get to U-boot shell, interrupt the autoboot process by pressing '0' when prompted 4. Set active_fw in env 4. Set active_fw in env # setenv active_fw 1 5. Transfer the initramfs image with TFTP # setenv serverip 192.168.1.10 (IP of TFTP server host) # setenv ipaddr 192.168.1.1 (IP used by the router for getting the image, must be in the same subnet as the TFTP host) # tftpboot openwrt-qualcommax-ipq807x-netgear_wax630-initramfs-uImage.itb 6. Reboot and load the image # bootm 7. SCP factory image to the AP # scp openwrt-qualcommax-ipq807x-netgear_wax630-squashfs-factory.ubi root@192.168.1.1:/tmp/ 8. Connect to device using SSH (use the LAN port) 9. Flash squashfs-factory.ubi from within the initramfs instance of OpenWRT Before you flash, please check your mtd partitions where mtdX is the right mtd rootfs partition. # cat /proc/mtd (To check MTD partitions) # ubiformat /dev/mtd18 -y -f /tmp/openwrt-qualcommax-ipq807x-netgear_wax630-squashfs-factory.ubi 10. Set active_fw to 0 # /usr/sbin/fw_setenv active_fw 0 11. Reboot the AP and your done # reboot ``` Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Kristian Skramstad <kristian+github@83.no>
* qualcommax: ipq807x: alphabetically sort Netgear WAX family.Kristian Skramstad2023-10-28
| | | | | | | | | | | | | As requested by the maintainers, the order for the WAX family should be alphabetically. WAX620 is now after WAX218. Files changed: +ipq807x.mk +01_leds No changes to the content. Signed-off-by: Kristian Skramstad <kristian+github@83.no>
* qualcommax: ipq8074: use upstreamed CPUFreq NVMEM supportRobert Marko2023-10-16
| | | | | | | | | | IPQ8074 CPUFreq NVMEM support has finally landed upstream, so lets use the upstreamed version. This has a benefit of also supporting IPQ8174 (Oak) family for which SMEM SoC ID-s were also upstreamed. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: add pending GPLL parent fixesRobert Marko2023-10-15
| | | | | | | | | | | | | | | | | | | | SBL will configure IPQ807x cores to boot at 800MHz as a safe default frequency that is provided by GPLL0, but GPLL0 is not currently configured as a possible parent in the APSS clock driver not being passed to it via DTS which will then cause the kernel to not properly identify the current CPU frequency during booting and will think that CPU is currently at XO frequency of 19.2MHz instead of 800MHz cores are actually at and print: cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz So, lets import patches pending upstream to prevent GPLL scaling and feed the GPLL0 clock to APSS clock driver so we get: cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz This is mostly cosmetic fix, but with all of the possible SBL and FW versions there could be edge cases resolved by this and not scaling GPLL-s anymore. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 6.1 to 6.1.57John Audia2023-10-14
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.57 Manually rebased: generic/pending-6.1/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch Removed upstreamed: qualcommax/patches-6.1/0134-PCI-qcom-Fixing-broken-pcie-enumeration-for-2_3_3-co.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.57&id=2dfb5f324d799f4545e17631415aba6d302a8e2b Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq807x: add support for Netgear WAX620Kristian Skramstad2023-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ``` Specifications: * CPU: Qualcomm IPQ8072A, SoC Version: 2.0, Quad core Cortex-A53 1.6896 GHz * RAM: 1 GiB of DDR4 600 MHz * Flash: NAND 2x256 MiB (Macronix MX30UF2G18AC) * 4 RGB LEDs: Power, LAN, 2.4GHz and 5GHz * UART: Two 4-pin unpopulated headers under the LEDs. Use the header closest to LED 4 and 5. They are marked with a white stroke. TX RX GND, beginning from "4". 115200n8. Lan: * One 100/1000/2.5GBASE-T Gigabit Ethernet (QCA8081) Wlan: * 4x4 in 2.4GHz: 802.11b/g/n/ax * 4x4 in 5.0GHz: 802.11a/n/ac/ax * OFDM and OFDMA * Bidir and MU-MIMO * Internal antenna 3.1/4.3 dBi (2.4GHz/5GHz) Power: * PoE+ 802.3at/af 25.5W * DC 12V 2.5A ``` ``` Note: The OpenWrt image is setup with DHCP and not a static IP. 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect to console on the AP, and connect the LAN port to your LAN 3. Stop auto boot to get to U-boot shell, interrupt the autoboot process by pressing '0' when prompted 4. Set active_fw in env # setenv active_fw 1 5. Transfer the initramfs image with TFTP # setenv serverip 192.168.1.10 (IP of TFTP server host) # setenv ipaddr 192.168.1.1 (IP used by the router for getting the image, must be in the same subnet as the TFTP host) # tftpboot openwrt-qualcommax-ipq807x-netgear_wax620-initramfs-uImage.itb 6. Reboot and load the image # bootm 7. SCP factory image to the AP # scp openwrt-qualcommax-ipq807x-netgear_wax620-squashfs-factory.ubi root@192.168.1.1:/tmp/ 8. Connect to device using SSH (use the LAN port) 9. Flash squashfs-factory.ubi from within the initramfs instance of OpenWRT Before you flash, please check your mtd partitions where mtdX is the right mtd rootfs partition. # cat /proc/mtd (To check MTD partitions) # ubiformat /dev/mtd19 -y -f /tmp/openwrt-qualcommax-ipq807x-netgear_wax620-squashfs-factory.ubi 10. Set active_fw to 0 # /usr/sbin/fw_setenv active_fw 0 11. Reboot the AP and your done # reboot ``` Signed-off-by: Kristian Skramstad <kristian+github@83.no>
* kernel: backport v6.6 nvmem changesRafał Miłecki2023-08-31
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq807x: add support for Netgear RAX120v2Thomas Kupper2023-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear Nighthawk RAX120v2 AX WIFI router with 5 1G and 1 5G ports. The majority of the code is based on @jewwest's PR #11830. Specifications: * CPU: Qualcomm IPQ8074 Quad core Cortex-A53 2.2GHz * RAM: 1024MB of DDR3 (Nanya NT5CC256M16EP-EK × 2) * Flash: SPI-NAND 512 MiB (Winbond W29N04GZBIBA) * Ethernet: 4x 10/100/1000 Mbps LAN, 1x 10/100/1000 Mbps WAN (Qualcomm QCA8075), 1x 10/100/1000/2500/5000 Mbps LAN/WAN (Aquantia AQR111B0 PHY) * Wi-Fi: * 2.4 GHz: Qualcomm QCN5024 4x4 * 2x 5 GHz: Qualcomm QCN5054 4x4 * USB: 2x USB 3.0 * LEDs: Power, 2.4GHz & 5GHz Radio, WPS, WAN, USB1 & USB2, 5G LAN * Keys: LEDs On/Off, Power, Reset, RFKILL, WPS * UART: Marked J9003 VCC TX RX GND, beginning from "1". 3.3v, 115200n8 * Power: 19 VDC, 3.1 A Installation: * Flashing OpenWrt is done in two steps: a) Flash *-squashfs-web-ui-factory.img from stock UI (thanks to @wangyu-). This writes an initramfs based OpenWrt image onto the RAX120v2 b) From OpenWrt flash the *-squashfs-sysupgrade.bin using LuCI or the commandline * U-Boot allows booting an initramfs image via TFTP: - Set ip of your PC to 192.168.1.100 - At the serial console interrupt boot at "Hit any key to stop autoboot:" - In u-boot run `tftpsrv` - On your PC send the OpenWrt initramfs image: tftp 192.168.1.1 -m binary -c put openwrt-ipq807x-generic-netgear_rax120v2-initramfs-uImage.itb Make 5G Aquantia phy work: For the 5G port labeled 'lan5' to work a firmware is needed. This can be loaded in u-boot by writing the firmware to the correct mtd partition. The firmware file found in the Netgear stock firmware under /lib/firmware/ named 'AQR-G3_v4.3.C-AQR_DNI_DR-EQ35AX8-R-prov1_ID23888_VER1311.cld' is needed and has to be converted to a MBN file. The `mkheader.py` script used here can be found in the Netgear V1.2.8.40 GPL source, under 'git_home/u-boot.git/tools/mkheader.py' Convert the CLD file to MBN using: $ python2 mkheader.py 0x44000000 0x13 <*.cld file> aqr_4.3.C.mbn This MBN file can then be flashed to the MTD partition to be used by u-boot. The necessary files can also be found in https://github.com/boretom/openwrt-fork/tree/rax120v2/aquantia-firmware * Write MBN file to MTD partition to be loaded automatically by u-boot: U-boot automatically tries to load the firmware from nand at address 0x7e00000 which corresponds to `/dev/mtd25` in OpenWrt. - find ETHPHYFW partition while running OpenWrt (expected: /dev/mtd25) $ fgrep -i 'ethphyfw' /proc/mtd mtd25: 00080000 00020000 "ethphyfw - copy mbn file to /tmp/ folder of the router $ scp aqr-v4.3.C.mbn 192.168.1.1:/tmp/ - write mbn file to ethphyfw partition $ mtd write /tmp/aqr_v4.3.C.mbn /dev/mtd25 Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References to RAX120v2 GPL source: https://www.downloads.netgear.com/files/GPL/RAX120-V1.2.8.40_gpl_src.zip Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
* qualcommax: remove upstreamed TRIM quirksRobert Marko2023-08-10
| | | | | | | | | | | | | | TRIM disable quirks for eMMC-s were merged upstreamed and backported to stable in 6.1.39, however they were not dropped during the kernel update and quilt is not complaining at all. So, lets manually remove them as they are part of 6.1.39 [1] [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/mmc/core/quirks.h?h=v6.1.39&id=182bf07a24c4c1022bf83c90be619d60427745c3 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/mmc/core/quirks.h?h=v6.1.39&id=69bc3203513c4fcd6ca84b0185de454bacf87883 Fixes: fec22f8375b4 ("kernel: bump 6.1 to 6.1.39") Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: refresh kernel configRobert Marko2023-08-10
| | | | | | Refresh the kernel config to keep in sync with the generic one. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq807x: fix Gen2 PCIe portRobert Marko2023-07-31
| | | | | | | | | | | | | | Gen2 PCIe port recently got broken on IPQ807x during update to 6.1.39 as upstream backported: ("PCI: qcom: Remove PCIE20_ prefix from register definitions") [1] So, fix it by adding a pending upstream fix for it [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/pci/controller/dwc/pcie-qcom.c?h=v6.1.39&id=db962c7a711c3393a80a18219960cd54fb33c53d [2] https://patchwork.kernel.org/project/linux-arm-msm/patch/20230724063429.3980462-1-quic_srichara@quicinc.com/ Fixes: fec22f8375b4 ("kernel: bump 6.1 to 6.1.39") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq807x: prpl-haze: fix sysupgrade flashing from bootloaderPetr Štetiar2023-07-28
| | | | | | | | | | | | | | | | | | | | While flashing sysupgrade image from U-Boot, then the rootfs_data overlay filesystem formatting is left for the fstools during firstboot, but that wont work as mkfs.f2fs is missing in the sysupgrade image: mount_root: overlay filesystem in /dev/loop0 has not been formatted yet mount_root: no usable overlay filesystem found, using tmpfs overlay sh: mkfs.f2fs: not found Filesystem Size Used Available Use% Mounted on /dev/loop0 139.6M 46.9M 92.6M 34% /overlay Number Start (sector) End (sector) Size Code Name 20 98850 406349 150.1 MiB FFFF rootfs So lets fix it by adding f2fs support to the sysupgrade image. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 6.1 to 6.1.40John Audia2023-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-6.1/701-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] generic/pending-6.1/160-workqueue-fix-enum-type-for-gcc-13.patch[2] qualcommax/patches-6.1/0022-v6.5-soc-qcom-mdt_loader-Fix-unconditional-call-to-scm_pa.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=685b57a1221c38ec8b456f968264d2496715820c 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=2d57a1590f4d8c516f5aaf8fd5bb4f52d67275d8 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=33f8dff6e1cbba5c2ec85fa5649c0a759a7e685c Build system: x86/64, filogic/xiaomi_redmi-router-ax6000-ubootmod Build-tested: x86/64, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.39John Audia2023-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[1] generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[2] bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch[3] bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch[4] bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch[5] bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[6] bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[7] mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch[8] qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[9] Manually rebased: bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ab0bd172d6289310a05a0cd15e1432e828d386ae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=6df680709d901346831ef8f221cc90a42062c526 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=5044e5f2511c9afdf9880d2bb6b9d37dfc345dac 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=e27948f329f7e02591ed1feb9a7710c2ccf89a83 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ad2928e7f3f6120a0bd18aa1056b3b24068027c5 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=2b55a985727833f37c39911f34096b3fdf2a367d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=90d4c487cd658b51212eb65ae804ab11af193672 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=7e3ee25e8c7c7be1eacdfc6d9f5f0e550a2af241 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=b20854ef6c4955be3310975a72f02d92cb01d6d4 Build system: x86/64 Build-tested: x86/64 Run-tested: x86/64 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Co-authored-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: John Audia <therealgraysky@proton.me> [ rebase bcm27xx and mediatek patches, refresh commit description ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [ minor fixup to bcm27xx patches, refresh commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: migrate FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER for 6.1Stefan Kalscheuer2023-06-25
| | | | | | | | | | The flag FORCE_MAX_ZONEORDER was renamed to ARCH_FORCE_MAX_ORDER in Kernel 6.1 [1]. Rename the flag in generic Kconfig and remove it from target configs. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0192445cb2f7ed1cd7a95a0fc8c7645480baba25 Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* qualcommax: ipq807x: use upstreamed thermal trips patchRobert Marko2023-06-17
| | | | | | | Critical thermal trips patch got merged upstream, so use the upstreamed patch and mark it as backport along with the future 6.5 kernel version. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: ipq807x: include BDF for Compex WPQ873Robert Marko2023-06-16
| | | | | | | | | Currently, Compex WPQ873 images are not including the ath11k BDF-s at all and this means that there is no WLAN support, so lets include the BDF as its already packaged. Fixes: 07c45c085908 ("ipq807x: add support for Compex WPQ873") Signed-off-by: Robert Marko <robimarko@gmail.com>
* qualcommax: move ipq807x support to subtargetRobert Marko2023-06-16
| | | | | | | | | | | | Now that qualcommax exists as a target and dependencies have been updated let move ipq807x support to subtarget of qualcommax. This is mostly copy/paste with the exception of having to update SSDK and NSS-DP to use CONFIG_TARGET_SUBTARGET. This is a preparation for later addition of IPQ60xx and IPQ50xx support. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq807x: rename target to qualcommaxRobert Marko2023-06-16
Currently, ipq807x only covers Qualcomm IPQ807x SoC-s. However, Qualcomm also has IPQ60xx and IPQ50xx SoC-s under the AX WiSoC-s and they share a lot of stuff with IPQ807x, especially IPQ60xx so to avoid duplicating kernel patches and everything lets make a common target with per SoC subtargets. Start doing that by renaming ipq807x to qualcommax so that dependencies on ipq807x target can be updated. Signed-off-by: Robert Marko <robimarko@gmail.com>
Powered by cgit, Themed by Ted Yin.