aboutsummaryrefslogtreecommitdiff
path: root/target/linux/mediatek
Commit message (Collapse)AuthorAge
...
* kernel: backport phylink changes from mainline LinuxDaniel Golle2024-02-15
| | | | | | | Let's pick a bunch of useful phylink changes which allow us to keep drivers in sync with mainline Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: switch to Linux version 6.1Daniel Golle2024-02-15
| | | | | | Drop support for Linux 5.15 and switch to Linux 6.1. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: import pending patches adding support for NVMEM on UBI and MMCDaniel Golle2024-02-15
| | | | | | | Similar to supporting nvmem-layouts on MTD devices, also allow referencing UBI and MMC devices in DT. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: allow skipping deprecated uImage.FIT partition parserDaniel Golle2024-02-15
| | | | | | | | | | | | In order to allow gradually migrating the boards currently using the uImage.FIT partition (deprecated/rejected) parser to the new fitblk driver, skip the partition parser code in case the new fitblk driver (which serves the same purpose) is used. As an indicator for the use of the new fitblk driver, check if the /chosen/rootdisk property is present in the Device Tree. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: move uImage.FIT partition parser to mediatek targetDaniel Golle2024-02-15
| | | | | | | | | | The partition parser approach has been rejected upstream, it will be replaced by a small block driver which is the solution suggestion by upstream maintainers. As the partition parser has only been used by the mediatek target, as a first step, move it there. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: fixup mt7988a DTS coding styleRafał Miłecki2024-02-13
| | | | | | Use coding style as described as preferred in upstream DTS Coding Style. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: filogic: reorder mt7988a DTS propertiesRafał Miłecki2024-02-13
| | | | | | | Use order described as preferred in DTS Coding Style. Mostly just move "compatible", "reg", "ranges" and "status" properties. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: fix failsafe ethernet for NWA50AX ProDavid Bauer2024-02-11
| | | | | | | | | The NWA50AX Pro only has a eth0 interface for its only ethernet port. Use this port for preinit. Fixes non-working network in failsafe mode. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 6.1 to 6.1.76John Audia2024-02-08
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.76 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: convert to new LED color/function format where possibleChristian Marangi2024-02-07
| | | | | | | | Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: drop redundant label with new LED color/function formatChristian Marangi2024-02-07
| | | | | | | | | Drop redundant label with new LED color/function format declared. This was needed previously when the new format wasn't supported by leds.sh functions script. Now that is supported this property can be removed in favor of the new format. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch to enable PHYLIB_LEDS kconfig dynamicallyChristian Marangi2024-02-05
| | | | | | | | | | Backport patch to enable PHYLIB_LEDS kconfig dynamically instead of having to select this config for every target that makes use of PHY LEDs API. All affected patch are automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: add Comfast CF-E393AX supportDavid Bentham2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Comfast CF-E393AX is a dual-band Wi-Fi 6 POE ceiling mount access point. Oem firmware is a custom openwrt 21.02 snapshot version. We can gain access via ssh once we remove the root password. Hardware specification: SoC: MediaTek MT7981A 2x A53 Flash: 128 MB SPI-NAND RAM: 256MB DDR3 Ethernet: 1x 10/100/1000 Mbps built-in PHY (WAN) 1x 10/100/1000/2500 Mbps MaxLinear GPY211C (LAN) Switch: MediaTek MT7531AE WiFi: MediaTek MT7976D LEDS: 1x (Red, Blue and Green) Button: Reset UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | VCC GND TX RX | <= | | ----------------- | -------------------------- Gain SSH access: 1. Login into web interface (http://apipaddress/computer/login.html), and download the configuration(http://apipaddress/computer/config.html). 2. Rename downloaded backup config - 'backup.file to backup.tar.gz', Enter 'fakeroot' command then decompress the configuration: tar -zxf backup.tar.gz 3. Edit 'etc/shadow', update (remove) root password: With password = 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' to Without password = 'root::0:99999:7:::' 'root::0:99999:7:::' 4. Repack 'etc' directory back to a new backup file: tar -zcf backup-ssh.tar.gz etc/ 5. Rename new config tar.gz file to 'backup-ssh.file' Exit fakeroot - 'exit' 6. Upload new configuration via web interface, now you can SSH with the following: 'ssh -vv -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa root@192.168.10.1'. Backup the mtd partitions - https://openwrt.org/docs/guide-user/installation/generic.backup 7. Copy openwrt factory firmware to the tmp folder to install via ssh: 'scp -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa \ *-mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin \ root@192.168.10.1:/tmp/' 'sysupgrade -n -F \ /tmp/*--mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin' 8. Once led has stopped flashing - Connect via ssh with the default openwrt ip address - 'ssh root@192.168.1.1' 9. SSH copy the openwrt sysupgrade firmware and upgrade as per the default instructions. Signed-off-by: David Bentham <db260179@gmail.com>
* kernel: bump 5.15 to 5.15.148John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.148 Removed upstreamed: generic/hack-5.15/321-powerpc_crtsavres_prereq.patch[1] Manually rebased: target/linux/octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.148&id=0b11a145eb00d51f7ef18cfcae587b93f9adb1e9 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit?h=v5.15.148&id=b67064bd372300a75293efbbc70624996dccffd4 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.75John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.75 Removed upstreamed: generic/hack-6.1/321-powerpc_crtsavres_prereq.patch[1] generic/pending-6.1/540-ksmbd-only-v2-leases-handle-the-directory.patch[2] Rebased: bcm27xx/patches-6.1/950-0670-fbdev-Don-t-cancel-deferred-work-if-pagelist-empty.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=16b88e68b85d5520c28498bb847358ff6300cb90 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/fs/smb?h=v6.1.75&id=c866866c795296d3637ab0d48a3d8a3ef5d6f4a3 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=81f444f22816a82ada2cc787a2845cffc8c584a6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport at803x split patchesChristian Marangi2024-02-01
| | | | | | | | | | | | | | Backport at803x split patches merged upstream to tidy things up for the at803x PHY driver. New Kernel config are introduced hence any user needs to be updated. Downstream ipq40xx patch require rework to correctly move them to the qcom specific PHY directory. All affected patch automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: fixes for Ethernet on MT7988 SoCDaniel Golle2024-02-01
| | | | | | | | * fix switch ports with modes other than 1000M/Full * set 32-bit dma_coherent_mask to get PPE to work with 4 GiB of RAM * sync driver for built-in 1GE PHY with MediaTek SDK sources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 5.15: backport upstream Aquantia PHY firmware loader patchesChristian Marangi2024-01-26
| | | | | | | | | | | | | | Backport merged upstream patch that adds support for firmware loader from NVMEM or attached filesystem for Aquantia PHYs. Refresh all kernel patches affected by this change. Also update the path for aquantia .ko that got moved to dedicated directory upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [rmilecki: port to 5.15] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: drop NMBM layout for Xiaomi WR30UChuanhong Guo2024-01-23
| | | | | | | | | This reverts commit dcdcfc15115a1038e90f21f5aa41726d9c7e2fe5. This is a firmware for third-party u-boot mod, which should not be carried here by us. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: add support for JDCloud RE-CP-03Tianling Shen2024-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: 128GB eMMC RAM: 1GB DDR4 Ethernet: 4x 1GbE, 1x 2.5GbE (RTL8221B) Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Joylink Power: DC 12V 2A Flash instructions: 1. Download and flash the vendor migration firmware via webUI: https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7986-jdcloud_re-cp-03-vendor-migration.bin (Default address is 192.168.68.1, user root, no password) 2. After device has booted up, write new GPT table: dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-gpt.bin of=/dev/mmcblk0 bs=512 seek=0 count=34 conv=fsync 3. Erase and write new BL2: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=/dev/zero of=/dev/mmcblk0boot0 bs=512 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-preloader.bin of=/dev/mmcblk0boot0 bs=512 conv=fsync 4. Erase and write new FIP: dd if=/dev/zero of=/dev/mmcblk0 bs=512 seek=13312 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-bl31-uboot.fip of=/dev/mmcblk0 bs=512 seek=13312 conv=fsync 5. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 6. Serve OpenWrt initramfs image using TFTP server. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After OpenWrt has booted, perform sysupgrade. 9. Additionally, if you want to have eMMC recovery boot feature: (Don't worry! You will always have TFTP recovery boot feature.) dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-initramfs-recovery.itb of=/dev/mmcblk0p4 bs=512 conv=fsync Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: bump 6.1 to 6.1.72John Audia2024-01-19
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.72 Manually rebased: generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: fix WED + wifi resetFelix Fietkau2024-01-19
| | | | | | | | | | The WLAN + WED reset sequence relies on being able to receive interrupts from the card, in order to synchronize individual steps with the firmware. When WED is stopped, leave interrupts running and rely on the driver turning off unwanted ones. WED DMA also needs to be disabled before resetting. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: refresh patches-6.1Daniel Golle2024-01-17
| | | | | | | | Refresh patches for Linux 6.1 which no longer apply cleanly after adding patches to fix ethernet rx hang issue on MT7981/MT7986. Fixes: ede34465de ("mediatek: fix ethernet rx hang issue on MT7981/MT7986") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix ethernet rx hang issue on MT7981/MT7986Felix Fietkau2024-01-16
| | | | | | Add patches by Lorenzo/Daniel to use QDMA instead of ADMAv2 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: GL-MT6000: Change LED colorsThomas Schröder2024-01-15
| | | | | | | | | | | | | | | | | | Fine tuning PR: openwrt/openwrt#14355 Ref: 5a82bb909bf1 ("mediatek: GL-MT6000: Add missing LED state definitions") As the only LED is using white in the stock firmware when the device is running and blue for the bootloader I suggest following changes: - Using blue for the BL and preinit+failsafe - White for normal operation (like the original FW) and sysupgrade With this changes it's clear by looking to the LED in which operation mode the device is and a possible BL stuck can be seen easily. Tested with [GL-MT6000](https://openwrt.org/toh/gl.inet/gl-mt6000). Signed-off-by: Thomas Schröder <tschroeder_github@outlook.com> Tested-by: Hannu Nyman <hannu.nyman@iki.fi>
* mediatek: TOTOLINK A8000RU: add missing usb3 packageChukun Pan2024-01-14
| | | | | | This device has a usb 3.0 port, so add it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: fixes typo for spi propertiesChukun Pan2024-01-14
| | | | | | Same as commit 3674689, correct 'buswidth' to 'bus-width'. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: YunCore AX835: convert to nvmem-layoutChukun Pan2024-01-14
| | | | | | | The nvmem-cells is deprecated. Also simplify mac address settings. Fixes: b4086f4 ("mediatek: add support for YunCore AX835") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: Cudy WR3000: simplify mac address setupChukun Pan2024-01-14
| | | | | | | | The mac address of the network port under the switch is the same as the corresponding gmac by default, so there is no need to repeat the setting. Compile test only. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: Cetron CT3003: move mac address setup to dtsChukun Pan2024-01-14
| | | | | | | It looks like we can put the mac address setting into the device tree. Compile test only. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: refresh kernel configChukun Pan2024-01-14
| | | | | | | Refresh kernel config with 'make kernel_oldconfig'. Also disable the useless rtl8367s gsw driver. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: mt7622: refresh kernel configChukun Pan2024-01-14
| | | | | | Refresh kernel config with 'make kernel_oldconfig'. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: fix BPI-R3 wifi mac addressFelix Fietkau2024-01-09
| | | | | | | | Setting/clearing bits on the first byte of the mac address causes collisions when using multiple SSIDs on both PHYs. Change the allocation to alter the last byte instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: disable btif for mt7622 devicesFelix Fietkau2024-01-09
| | | | | | It breaks built-in SoC WLAN. Can be re-enabled after we've figured out the cause Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: add support for YunCore AX835Leon M. Busch-George2024-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 16MB NOR RAM: 256MB Ethernet: 2x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset Power: DC 12V 1A, PoE 802.3af 48V Flash instructions: Option #1 - SSH I was able to SSH into the stock firmware of my device. 1. Attach the router to the network 2. Use scp (-O) to copy the sysupgrade image 3. Connect using SSH and run `sysupgrade -n` Option #2 - U-Boot One way to use the bootloader for flashing is using TFTP: 1. Connect to the router using an ethernet cable 2 Spin up a TFTP server serving the sysupgrade file 3. Open the case and attach a UART 4. Attach power to the router and interrupt the countdown by pressing any key 5. Select option #2 (Upgrade firmware) 6. Enter IP address information and image name 7. Wait patiently Co-Authored-By: Enrique Rodríguez Valencia <enrique.rodriguez@galgus.net> Co-Authored-By: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* mediatek: GL-MT6000: Add missing LED state definitionsHannu Nyman2024-01-09
| | | | | | | | | | | | | | | | | | | | Adjust LED names and provide the OpenWrt status indicator aliases to actually use LEDs by the OpenWrt boot & sysupgrade processes. * Name both LEDs clearly by the color * Add the missing OpenWrt LED status indicator aliases and remove the now unnecessary default status from blue LED After this commit, the LEDs are used as: * bootloader, really early Linux boot: blue LED is on * preinit/failsafe: white LED blinks rapidly * late boot: white LED blinks slowly * boot completed, running normally: blue LED is on * sysupgrade: white LED blinks Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mediatek: filogic: add support for Xiaomi AX3000TDim Fish2024-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **SoC**: MediaTek MT7981B 2x A53 **Flash**: ESMT F50L1G41LB 128MB **RAM**: NT52B128M16JR-FL 256MB **Ethernet**: 4x 10/100/1000 Mbps **Switch**: MediaTek MT7531AE **WiFi**: MediaTek MT7976C **Buttons**: Reset, Mesh **Power**: DC 12V 1A 1. Get ssh access. Supported stock firmware **1.0.47** ``` curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20set%20ssh_en%3D1%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20commit%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Ased%20-i%20's%2Fchannel%3D.*%2Fchannel%3D%22debug%22%2Fg'%20%2Fetc%2Finit.d%2Fdropbear%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=********/api/misystem/arn_switch" -d "open=1&model=1&level=%0Apasswd%20-d%20root%0A ``` 2. Backup stock partitions ``` nanddump -f /tmp/BL2.bin /dev/mtd1 nanddump -f /tmp/Nvram.bin /dev/mtd2 nanddump -f /tmp/Bdata.bin /dev/mtd3 nanddump -f /tmp/Factory.bin /dev/mtd4 nanddump -f /tmp/FIP.bin /dev/mtd5 nanddump -f /tmp/ubi.bin /dev/mtd8 nanddump -f /tmp/KF.bin /dev/mtd12 ``` Then transfer them to your computer in a safe place. 3. Get firmware information `cat /proc/cmdline` 4. Copy openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi to **/tmp** and flash If **firmware=0** ``` ubiformat /dev/mtd9 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` If **firmware=1** ``` ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` Then reboot your router, it should boot to the OpenWrt initramfs system now. 5. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin` 1. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` `reboot` 2. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 3. Format ubi and create new ubootenv volume ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB ``` 4. *(Optional **-10Mb** free space) Add recovery boot feature.* ``` ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb ``` 5. Flash Openwrt U-Boot ``` mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin BL2 mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip FIP ``` 6. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb` 1. Force flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `sysupgrade -F -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` 2. Format ubi and Nvram ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 mtd erase Nvram ``` 3. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Flash stock images from backup ``` mtd write /tmp/BL2.bin BL2 mtd write /tmp/FIP.bin FIP mtd write /tmp/ubi.bin ubi ``` Then reboot your router, waiting it finished rollback in minutes. `ubiformat /dev/mtd7 -y -f /tmp/ubi.bin` Then reboot your router, waiting it finished rollback in minutes. Signed-off-by: Dim Fish <dimfish@gmail.com>
* kernel: bump 6.1 to 6.1.71John Audia2024-01-06
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.71 Manually rebased: gemini/patches-6.1/0002-usb-fotg210-Collect-pieces-of-dual-mode-controller.patch All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.146John Audia2024-01-06
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.146 Removed upstreamed: generic/hack-5.15/940-ksmbd-have-a-dependency-on-cifs-arc4.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.146&id=ac385518598f50dd1b9b41bd05f50ce9795481d5 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: MERCUSYS MR90X v1: remove deprecated led "label" propertiesMikhail Zhilkin2024-01-06
| | | | | | | | | | | This commit: 1. Removes deprecated "label" property from the dts leds subnnodes; 2. Updates "01_leds" script. Link: https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml Link: https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/leds-gpio.yaml Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* mediatek: Add support for D-Link EAGLE PRO AI R32Roland Reinl2024-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | R32 is like the M32 part of the EAGLE PRO AI series from D-Link. Specification: - MT7622BV SoC with 2.4GHz wifi - MT7975AN + MT7915AN for 5GHz - MT7531BE Switch - 512MB RAM - 128 MB flash - 2 LEDs (Status and Internet, both can be either orange or white) - 2 buttons (WPS and Reset) Compared to M32, the R32 has the following differences: - 4 LAN ports instead of 2 - The recory image starts with DLK6E6015001 instaed of DLK6E6010001 - Individual LEDs for power and internet - MAC address is stored at another offset in the ODM partition MAC addresses: - WAN MAC is stored in partition "Odm" at offset 0x81 - LAN (as printed on the device) is WAN MAC + 1 - WLAN MAC (2.4 GHz) is WAN MAC + 2 - WLAN MAC (5GHz) is WAN MAC + 3 Flashing via Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.0 - Press the reset button while powering on the deivce - Keep the reset button pressed until the internet LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Download openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-recovery.bin Flashing via uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-initramfs-kernel.bin. - You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "1. System Load Linux to SDRAM via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to RAM will start. After a few seconds OpenWrt initramfs should start - The initramfs is accessible via 192.168.1.1, change your IP address accordingly (or use multiple IP addresses on your interface) - Create a backup of the Kernel1 partition, this file is required if a revert to stock should be done later - Perform a sysupgrade using openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-squashfs-sysupgrade.bin - Reboot the device. OpenWrt should start from flash now Revert back to stock using the Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.0 - Press the reset button while powering on the deivce - Keep the reset button pressed until the internet LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Flash a decrypted firmware image from D-Link. Decrypting an firmware image is described below. Decrypting a D-Link firmware image: - Download https://github.com/RolandoMagico/firmware-utils/blob/M32/src/m32-firmware-util.c - Compile a binary from the downloaded file, e.g. gcc m32-firmware-util.c -lcrypto -o m32-firmware-util - Run ./m32-firmware-util R32 --DecryptFactoryImage <OriginalFirmware> <OutputFile> - Example for firmware R32A1_FW103B01: ./m32-firmware-util R32 --DecryptFactoryImage R32A1_FW103B01.bin R32A1_FW103B01.decrypted.bin Revert back to stock using uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides the previously created backup of the Kernel1 partition. - You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "2. System Load Linux Kernel then write to Flash via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to FLASH will start. After a few seconds the stock firmware should start again There is also an image openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-tftp.bin which can directly be flashed via U-Boot and TFTP. It can be used if no backup of the Kernel1 partition is reuqired. Flahsing via OEM web interface is currently not possible, the OEM images are encrypted. Creating images is only possible manually at the moment. The support for the M32/R32 already includes support for flashing from the OEM web interface: - The device tree contains both partitions (Kernel1 and Kernel2) with conditions to select the correct one based on the kernel command line - The U-Boot variable "boot_part" is set accordingly during startup to finish the partition swap after flashing from the OEM web interface - OpenWrt sysupgrade flashing always uses the partition where it was initially flashed to (no partition swap) Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
* mediatek: filogic: Asus TUF AX6000 fix inverted LED for 2.5Gb LAN portPatryk Kowalczyk2024-01-02
| | | | | | | | Router Asus TUF AX6000 have second MaxLinear GPY211 PHY controller for 2.5Gb LAN port. The 5'th LAN port have inverted status of the LED. Based on the commit from main branch 90fbec8 we could set proper status of the LED. Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
* mediatek: filogic: add support ASUS RT-AX59UXavier Franquet2023-12-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (based on support for ASUS RT-AX59U by liushiyou006) SOC: MediaTek MT7986 RAM: 512MB DDR4 FLASH: 128MB SPI-NAND (Winbond W25N01GV) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: MediaTek MT7531 Switch UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Upgrade from AsusWRT to OpenWRT using UART Download the OpenWrt initramfs image. Copy the image to a TFTP server reachable at 192.168.1.70/24. Rename the image to rtax59u.bin. Connect the PC with TFTP server to the RT-AX59U. Set a static ip on the ethernet interface of your PC. (ip address: 192.168.1.70, subnet mask:255.255.255.0) Conect to the serial console, interrupt the autoboot process by pressing '4' when prompted. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.1.1 $ setenv serverip 192.168.1.70 $ tftpboot 0x46000000 rtax59u.bin $ bootm 0x46000000 Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Upgrade from AsusWRT to OpenWRT using WebUI Download transit TRX file from https://drive.google.com/drive/folders/1A20QdjK7Udagu31FSszpWAk8-cGlCwsq Upgrade firmware from WebUI (192.168.50.1) using downloaded TRX file Wait for OpenWRT to boot (192.168.1.1). Upgrade system with sysupgrade image using luci or uploading it through scp and executing sysupgrade command MAC Address for WLAN 5g is not following the same algorithm as in AsusWRT. We have increased by one the WLAN 5g to avoid collisions with other networks from WLAN 2g when bit 28 is already set. : Stock : OpenWrt WLAN 2g (1) : C8:xx:xx:0D:xx:D4 : C8:xx:xx:0D:xx:D4 WLAN 2g (2) : : CA:xx:xx:0D:xx:D4 WLAN 2g (3) : : CE:xx:xx:0D:xx:D4 WLAN 5g (1) : CA:xx:xx:1D:xx:D4 : CA:xx:xx:1D:xx:D5 WLAN 5g (2) : : CE:xx:xx:1D:xx:D5 WLAN 5g (3) : : C2:xx:xx:1D:xx:D5 WLAN 2g (1) : 08:xx:xx:76:xx:BE : 08:xx:xx:76:xx:BE WLAN 2g (2) : : 0A:xx:xx:76:xx:BE WLAN 2g (3) : : 0E:xx:xx:76:xx:BE WLAN 5g (1) : 0A:xx:xx:76:xx:BE : 0A:xx:xx:76:xx:BF WLAN 5g (2) : : 0E:xx:xx:76:xx:BF WLAN 5g (3) : : 02:xx:xx:76:xx:BF Signed-off-by: Xavier Franquet <xavier@franquet.es>
* mediatek: filogic: reorder nodes in mt7988a.dtsiRafał Miłecki2023-12-29
| | | | | | | | Use order described as preferred in DTS Coding Style: 1. Sort bus nodes by unit address 2. Use alpha-numerical order for the rest Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: add support for Routerich AX3000Mikhail Zhilkin2023-12-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is continuation of work under "mediatek: add support for Routerich AX3000" #13703 by the agreement with PR #13703 original author (Maximilian Weinmann <x1@disroot.org>). All reviews from the previous PR were taken into into account. Routerich AX3000 is a wireless WiFi 6 router. Specification ------------- - SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz - RAM : DDR3 256 MiB (ESMT M15T2G16128A) - Flash : SPI-NAND 128 MiB (ESMT F50L1G41LB) - WLAN : MediaTek MT7976CN dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz : a/n/ac/ax, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE) - USB : 1x 2.0 - UART : through-hole on PCB - [J500] GND, TX, RX, 3.3V (115200n8) - Buttons : Mesh, Reset - LEDs : 1x Power (Blue) 1x WiFi 2.4 GHz (Blue) 1x WiFi 5 GHz (Red) 1x Mesh (Blue) 3x LAN activity (Blue) 1x WAN activity (Blue) 2x WAN no-internet (Red) - Power : 12 VDC, 1.5 A Installation ------------ Flash OpenWrt 'sysupgrade.bin' image using stock firmware web-interface (without keeping settings). Return to stock --------------- Install stock firmware image (without keeping settings) using OpenWrt sysupgrade method. Recovery -------- Connect uart, use u-boot menu to flash stock firmware image or boot OpenWrt initramfs image. MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 24:0f:5e:xx:xx:b4 | label | | LAN | 24:0f:5e:xx:xx:b5 | label+1 | | WLAN 2g | 24:0f:5e:xx:xx:b6 | label+2 | | WLAN 5g | 24:0f:5e:xx:xx:b7 | label+3 | +---------+-------------------+-----------+ The WLAN 2g MAC was found in 'Factory', 0x4 Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* mediatek: add support for Zbtlink ZBT-Z8103AXIan Oderon2023-12-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SoC: MediaTek MT7981B RAM: 256MiB Flash: SPI-NAND 128 MiB Switch: 1 WAN, 3 LAN (Gigabit) Buttons: Reset, Mesh Power: DC 12V 1A WiFi: MT7976CN UART: 115200n8 UART Layout: VCC-RX-TX-GND No. of Antennas: 6 Note: Upon opening the router, only 5 antennas were connected to the mainboard. Led Layout: Power-Mesh-5gwifi-WAN-LAN3-LAN2-LAN1-2gWiFi Buttons: Reset-Mesh Installation: A. Through OpenWrt Dashboard: If your router comes with OpenWrt preinstalled (modified by the seller), you can easily upgrade by going to the dashboard (192.168.1.1) and then navigate to System -> Backup/Flash firmware, then flash the firmware B. Through TFTP Standard installation via UART: 1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin). 2. Power on the router. Make sure that you can access your router via UART. 3. Restart the router then repeatedly press ctrl + c to skip default boot. 4. Type > bootmenu 5. Press '2' to select upgrade firmware 6. Press 'Y' on 'Run image after upgrading?' 7. Press '0' and hit 'enter' to select TFTP client (default) 8. Fill the U-Boot's IP address and TFTP server's IP address. 9. Finally, enter the 'firmware' filename. Signed-off-by: Ian Oderon <ianoderon@gmail.com>
* mediatek: enable mt7981-wo-firmware package by defaultRobert Senderek2023-12-25
| | | | | | | | | Add support for wireless offload package in default configuration for -Cudy WR3000 -Confiabits MT7981 For some reason those ware missing. I confirm this work for my Cudy WR3000 Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
* kernel: bump 5.15 to 5.15.143John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.143 Removed upstreamed: generic/backport-5.15/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-5.15/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.143&id=00beca907a7be61da935bb687f9601420fc5f8a8 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.68John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68 Removed upstreamed: generic/backport-6.1/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.68&id=3759e735562a31e44fee825498f05c06e64b25a8 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.66John Audia2023-12-12
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.66 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
Powered by cgit, Themed by Ted Yin.