aboutsummaryrefslogtreecommitdiff
path: root/target/linux/mediatek/mt7629
Commit message (Collapse)AuthorAge
* mediatek: remove files, patches and config for Linux 6.6Daniel Golle2025-07-18
| | | | | | Drop support for Linux 6.6 now that we are using Linux 6.12. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7629: add the missing symbol CONFIG_LEDS_SMARTRG_LEDShiji Yang2025-05-29
| | | | | | | | | This symbol was lost when porting to the 6.12 kernel. Fixes: 16b5a77716f6 ("mediatek: mt7629: update config-6.12") Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/18947 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: mt7629: update config-6.12Daniel Golle2025-05-26
| | | | | | | Refresh kernel configuration of the mt7629 subtarget for use with Linux 6.12. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel/mediatek: Restore kernel files for v6.6Daniel Golle2025-05-26
| | | | | | | | | | | This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. For the original discussion see: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel/mediatek: Create kernel files for v6.12 (from v6.6)Daniel Golle2025-05-26
| | | | | | | | This is an automatically generated commit. When doing `git bisect`, consider `git bisect --skip`. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: import rtl8261n patches from mediatekAndrew LaMarche2025-03-16
| | | | | | | | | RTL8261N is used on some Airoha and Realtek devices. Move the driver from Mediatek to generic so it can be used everywhere. Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18163 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_NET_SWITCHDEV in generic configHauke Mehrtens2025-03-15
| | | | | | | | | | | | | | | | The CONFIG_NET_SWITCHDEV option is needed by CONFIG_DSA and some other options. It is boolean, we have to compile it into the kernel it self. Activate it for all targets in the generic configuration, it is already activated for most of them. This allows to install DSA drivers as a module. On the ramips/mt7620 target the kernel would grown by 4.5kB. For some small targets which do not support a DSA switch by default the option is deactivated. Link: https://github.com/openwrt/openwrt/pull/17668 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: Refresh kernel configurationMartin Schiller2025-03-06
| | | | | | | | | | | | | | I selected one subtarget after the other and refreshed their configuration using this command: make kernel_oldconfig CONFIG_TARGET=subtarget For MT7629 I had to re-add CONFIG_LEDS_SMARTRG_LED manually. Otherwise, building MT7629 with ALL_KMODS we get prompted for LEDS_SMARTRG_LED and this will break CI and in future buildbot compilation. See commit 6bdea8c7bd85 ("mediatek: mt7629: 6.6: disable LEDS_SMARTRG_LED by default") for more details. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* mediatek: add Airoha AN8855 gigabit switch driverDim Fish2025-01-23
| | | | | | | | | | | New revisions of Xiaomi AX3000T with 1.0.84+ stock firmware contain new hardware. This commit add support for Airoha AN8855 gigabit switch driver with 6.6 kernel patches Based on https://patchwork.kernel.org/project/netdevbpf/cover/20241209134459.27110-1-ansuelsmth@gmail.com/ Signed-off-by: Dim Fish <dimfish@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16709 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: filter out compiler opts from configRosen Penev2024-11-17
| | | | | | | | | These get dynamically set based on compiler version. Not relevant for targets. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16770 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove GCC11_NO_ARRAY_BOUNDSRosen Penev2024-11-17
| | | | | | | | This symbol is no longer present. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16770 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: add support for Realtek RTL8261n 10G PHYsJohn Crispin2024-11-01
| | | | | | There is no upstream driver yet. Merge the RTL SDK driver for now. Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: Remove double CONFIG_HARDEN_BRANCH_PREDICTORHauke Mehrtens2024-10-22
| | | | | | | | | | CONFIG_HARDEN_BRANCH_PREDICTOR option is included two times in this configuration file. Remove one definition. On arm32 SoC it should not be needed. Fixes: 54f9744c820a ("treewide: disable spectre mitigation on unaffected Arm32 targets") Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: add driver for Adtran MFGINFO NVMEM layoutDaniel Golle2024-10-15
| | | | | | | This driver allows retrieving MAC addresses and other factory information via the NVMEM framework on Adtran devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: phase out uImage.FIT partition parserDaniel Golle2024-08-28
| | | | | | | | All boards using the deprecated uImage.FIT partition parser have been migrated to the new fitblk driver. Drop the now no longer needed partition parser. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: Add support for Linksys EA7500 v3Roland Reinl2024-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - MT7629 CPU - MT7531 switch - MT7761N and MT7762N wifi - 256 MB RAM - 128 MB NAND flash with dual-boot partitions - 2 buttons: WPS and reset - 1 WAN port (1G) - 4 LAN ports (1G) - 1 USB port Limitations (same as other MT7629/MT7761N/MT7762N devices): - Wifi is not working - Second core is not working (kernel error message "CPU1: failed to come online") Disassembly: - There are two screws under the front rubber feet and two under the label on the bottom (in the corners towards the back, you should be able to feel them). Serial Interface: - UART pin header is already soldered on the board. Pinning from front to back: 1 - VCC 2 - TX 3 - RX 4 - n/a 5 - GND GPIO: - 1 white LED, connected to GPIO 52 - 1 reset button, connected to GPIO 60 - 1 WPS button, connected to GPIO 58 MAC Adresses: - The MAC address printed on the device label is used for LAN and WAN - The MAC address is stored in the devinfo partition in ASCII format (hw_mac_addr=aa:bb:cc:dd:ee) - 2.4 GHz wifi uses MAC of the device label + 1 - 5 GHz wifi uses MAC of the device label + 2 Flashing: - OpenWrt is only runnig in the first partition of dual boot - To ensure to be able to go back to the factory image, flash the last OEM firmware via OEM web interface. This will ensure that the OEM firmware is present on both partitions - Because of dual boot partitions, flashing via OEM interface is not supported - Start a TFTP server and provide the initramfs image. Default settings: - Router IP: 192.168.1.1 - TFTP server IP: 192.168.1.100 - TFTP file name: 7531.bin - Open the device, connect UART and select " 1. System Load Linux to SDRAM via TFTP." during startup - Adapt the settings to your environment, if required - After initramfs is booted, flash the sysupgrade image Return to OEM firmware: - Run the following commands in OpenWrt to switch to the second partition fw_setenv boot_part 2 fw_setenv bootimage 2 - Reboot the device. OEM firmware will start up again Signed-off-by: Roland Reinl <reinlroland+github@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16067 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: switch to Linux 6.6Daniel Golle2024-05-03
| | | | | | | Switch to Linux kernel version 6.6 and drop configs, files and patches for Linux 6.1. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add Airoha EN8801SC PHY driverRobert Marko2024-04-11
| | | | | | | | | | | Airoha EN8801SC PHY is a gigabit PHY used on Edgecore EAP111 so, include the MTK driver with some cleanups. Unfortunatelly, there is no specification sheet nor datasheet available in order to demistify the magic PBUS writes and work on upstreaming this driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* treewide: disable spectre mitigation on unaffected Arm32 targetsQingfang Deng2024-03-23
| | | | | | | Cortex-A5 and Cortex-A7 are not vulnerable to any Spectre variants. Ref: https://developer.arm.com/Arm%20Security%20Center/Speculative%20Processor%20Vulnerability Signed-off-by: Qingfang Deng <dqfext@gmail.com>
* mediatek: mt7629: 6.6: disable LEDS_SMARTRG_LED by defaultRobert Marko2024-03-22
| | | | | | | | | | | When building MT7629 with ALL_KMODS then we get prompted for LEDS_SMARTRG_LED and this will break CI and in future buildbot compilation. It depends on I2C so the symbol is hidden until ALL_KMODS is used and I2C support is available, so disable the LEDS_SMARTRG_LED symbol in 6.6 config intentionally as is done in the 6.1 mt7629 config. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mediatek: add kernel configs for Linux 6.6Daniel Golle2024-03-11
| | | | | | Add config-6.6 for all mediatek subtargets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: switch to Linux version 6.1Daniel Golle2024-02-15
| | | | | | Drop support for Linux 5.15 and switch to Linux 6.1. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: move uImage.FIT partition parser to mediatek targetDaniel Golle2024-02-15
| | | | | | | | | | The partition parser approach has been rejected upstream, it will be replaced by a small block driver which is the solution suggestion by upstream maintainers. As the partition parser has only been used by the mediatek target, as a first step, move it there. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: import driver for Adtran SmartRG RGBW LEDDaniel Golle2023-12-10
| | | | | | | Import driver for I2C-connected HolTek MCU controlling the RGBW LED found in Adtran SmartRG devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: Add support for TP-Link EAP225v5Roland Reinl2023-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specification: - MT7629 with 16MB NOR flash W25Q128 and 128 MB DDR3 RAM. - MT7761N and MT7762N wireless chips (currenlty no driver in OpenWrt available) - WiFi is NOT working on this device - Dual core but second CPU doesn't seem to work (Error message during boot: "CPU1: failed to come online") There are two similar merge requests for similar devices with the same issues: - https://github.com/openwrt/openwrt/pull/12286 - https://github.com/openwrt/openwrt/pull/5084 UART interface is next to the reset button, pinout: - 1: TX (the pin with the arrow marker) - 2: RX - 3: GND - 4: VCC UART settings: 115200,8n1, 3.3V U-Boot menu can be entered by pressing Ctrl+B during startup. Booting initramfs: - Set your computers IP adress to 192.168.1.110 - Run a TFTP server providing the initramfs image - Power on the AP, press Ctrl+B to get to the U-Boot menu - Select "1. System Load Linux to SDRAM via TFTP" - Update kernel file name, input server IP and input device IP (if they deviate from the defaults) - After booting, create a backup of all partitions, especially for kernel and root_fs. They are required for reverting back to stock firmware - The sysupgrade image can be flashed now MAC adresses: - LAN and 2.4GHz use the same MAC (the one printed on the device) - 5GHz WiFi MAC is LAN MAC + 1 GPIOs: - GPIO 21 is the reset pin (low active) - GPIO 55 is for the green LED (active high) - GPIO 56 is for the yellow/amber LED (active high) Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
* mediatek: adapt kernel configuration for Linux 6.1Daniel Golle2023-07-07
| | | | | | Update kernel configuration to build Linux 6.1 for all subtargets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: copy config-5.15 to config-6.1 for all subtargetsDaniel Golle2023-07-07
| | | | | | | To ease review, first copy all subtargets' kernel config-5.15 to the to-be-adapted config-6.1. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Netgear EX6250v2 seriesWenli Looi2023-07-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac (Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work currently as there is no driver. Related: https://github.com/openwrt/openwrt/pull/5084 For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2. Specifications: * MT7629, 256 MiB RAM, 16 MiB SPI NOR * MT7761N (2.4GHz) / MT7762N (5GHz) - no driver * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * After installation, perform a factory reset. Wait for the device to boot, then hold the reset button for 10 seconds. This is needed because sysupgrade in the stock firmware will attempt to preserve its configuration using sysupgrade.tgz. See https://github.com/openwrt/openwrt/pull/4182 Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
* generic: mt7530: backport support for the MT7988 built-in switchDaniel Golle2023-05-23
| | | | | | | | | | | | | | | | Backport commits adding support for the MT7988 built-in switch to the mt7530 driver. This change results in the Kconfig symbol NET_DSA_MT7530 to be extended by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530) and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in switch of the MT7988 SoC). Select NET_DSA_MT7530_MDIO for all targets previously selecting NET_DSA_MT7530, with the exception of mediatek/filogic which also selects NET_DSA_MT7530_MMIO. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add mt7988 clock drivers supportSam Shih2023-05-23
| | | | | | | This adds clock drivers for the MediaTek MT7988 SoC Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: enable CONFIG_ARM_CRYPTO for 32bit arm targetsLu jicong2023-05-10
| | | | | | | Fix following error when building 32bit arm targets with kmod-crypto-sha512 ERROR: module '/home/user/openwrt/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood_generic/linux-5.15.109/arch/arm/crypto/sha512-arm.ko' is missing. Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* generic: refresh 5.15 kernel configLu jicong2023-05-10
| | | | | | prepare for enabling CONFIG_ARM_CRYPTO on these targets Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* kernel: improve handling of CONFIG_IO_URINGTony Ambardar2023-05-03
| | | | | | | | | | | | | | | | | | | | | | Kernel setting CONFIG_IO_URING supports high-performance I/O for file access and servers, generally for more performant platforms, and adds ~45 KB to kernel sizes. The need for this on less "beefy" devices is questionable, as is the size cost considering many platforms have kernel size limits which require tricky repartitioning if outgrown. The size cost is also large relative to the ~180 KB bump expected between major OpenWRT kernel releases. No OpenWrt packages have hard dependencies on this; samba4 and mariadb can take advantage if available (+KERNEL_IO_URING:liburing) but otherwise build and work fine. Since CONFIG_IO_URING is already managed via the KERNEL_IO_URING setting in Config-kernel.in (default Y), remove it from those target configs which unconditionally enable it, and update the defaults to enable it conditionally only on more powerful 64-bit x86 and arm devices. It may still be manually enabled as needed for high-performance custom builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: Activate CONFIG_HARDENED_USERCOPY for all targetsHauke Mehrtens2023-04-29
| | | | | | | | | | | | | | This activates CONFIG_HARDENED_USERCOPY for the remaining targets. This adds additional checks in the copy_from_user() and copy_to_user() functions. This was not activated for ARCHS38 before because of a bug in the Linux kernel 5.4 till 5.14, which as fixed and is described here: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/15 I do not know why this was deactivated for mt7629 and rockchip. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: backport clk driver for MT7981 SoCDaniel Golle2023-03-27
| | | | | | | Backport driver for common clocks in MT7981 SoC. The driver has also been submitted upstream and became part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: update NVMEM symbolsRafał Miłecki2023-01-07
| | | | | Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: add support for ipTIME A6004MX Add basic support for ipTIME A6004MX.Yoonji Park2022-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | Hardware: SoC: MediaTek MT7629 Cortex-A7 (ARMv7 1.25GHz, Dual-Core) RAM: DDR3 128MB Flash: Macronix MX35LF1GE4AB (SPI-NAND 128MB) WiFi: MediaTek MT7761N (2.4GHz) / MediaTek MT7762N (5GHz) - no driver Ethernet: SoC (WAN) / MediaTek MT7531 (LAN x4) UART: [GND, RX, TX, 3.3V] (115200) Installation: - Flash recovery image with TFTP recovery Revert to stock firmware: - Flash stock firmware with TFTP recovery TFTP Recovery method: 1. Unplug the router 2. Hold the reset button and plug in 3. Release when the power LED stops flashing and go off 4. Set your computer IP address manually to 192.168.0.x / 255.255.255.0 5. Flash image with TFTP client to 192.168.0.1 Signed-off-by: Yoonji Park <koreapyj@dcmys.kr>
* mediatek: add mt7986 soc support to the targetSam Shih2022-08-28
| | | | | | | | | It will be supported by the new filogic subtarget Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Activate CONFIG_GPIOLIB in generic configurationHauke Mehrtens2022-08-10
| | | | | | | | All targets expect the malta target already activate the CONFIG_GPIOLIB option. Move it to generic kernel configuration and also activate it for malta. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add missing mediatek configuration optionsHauke Mehrtens2022-07-06
| | | | | | | | | | When building the mediatek/mt7629 target in OpenWrt 22.03 the kernel does not have a configuration option for CONFIG_CRYPTO_DEV_MEDIATEK. Add this option to the generic kernel configuration and also add two other configuration options which are removed when we refresh the mt7629 kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-24
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mediatek: mt7629: disable auxadc in kconfigChuanhong Guo2022-04-30
| | | | | | manually edit kconfig to disable MT6577_AUXADC Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: remove left-overs from Linux 5.10Daniel Golle2022-04-30
| | | | | | | | Remove patches and configuration for Linux 5.10 which have been left in the tree despite the target having been switched to Linux 5.15. Fixes: c283defa88 ("mediatek: switch to 5.15") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7629: disable mtk thermalChuanhong Guo2022-04-29
| | | | | | Manually edit kconfig to disable CONFIG_MTK_THERMAL Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: enable snfi for mt7629Chuanhong Guo2022-04-28
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: 5.15: enable arm arch timer for mt7629Chuanhong Guo2022-04-14
| | | | | | otherwise the system delay is completely broken. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: add 5.15 config for mt7623 and mt7629Daniel Golle2022-03-27
| | | | | | | Compile tested both with all kernel modules. Run-time tested mt7623 on BananaPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: 5.10: consolidate mac80211 crypto optionsSergey Ryazanov2021-12-17
| | | | | | | | | | | | | | | | | | | | | | Each of - CRYPTO_AEAD2 - CRYPTO_AEAD - CRYPTO_GF128MUL - CRYPTO_GHASH - CRYPTO_HASH2 - CRYPTO_HASH - CRYPTO_MANAGER2 - CRYPTO_MANAGER - CRYPTO_NULL2 either directly required for mac80211 crypto support, or directly selected by such options. Support for the mac80211 crypto was enabled in the generic config since c7182123b9 ("kernel: make cryptoapi support needed by mac80211 built-in"). So move the above options from the target configs to the generic config to make it clear why do we need them. CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-17
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: move two symbols to the generic kconfigsRui Salvaterra2021-08-29
| | | | | | | CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them to the generic kconfigs. And resort the generic kconfigs while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Powered by cgit, Themed by Ted Yin.