aboutsummaryrefslogtreecommitdiff
path: root/target/linux/mediatek/image/mt7622.mk
Commit message (Collapse)AuthorAge
* mediatek: Moved recovery image creation to include/image-commands.mkRoland Reinl2024-03-31
| | | | | | The recovery image is reqired for D-Link M30 as well. So I moved it to include/image-commands.mk to be able to use it for MT7622 and filogic devices. Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
* mediatek: mt7622: add a second u-boot for redmi-ax6sChuanhong Guo2024-03-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vendor u-boot knows nothing about UBI, and we used to have a fixed-size kernel partition for vendor u-boot and UBI for rootfs. However, that fixed partition becomes too small eventually, and expanding it requires complicated procedure. This commit changed the flash layout and added a second u-boot where the kernel supposed to be. Now the vendor u-boot chainloads our mainline u-boot, and our u-boot reads kernel+rootfs from UBI, verifies it, and boot into OpenWrt. There are two possible ways to convert from the old fw: Flash the factory image using mtd (provided by @rany2): mount -o remount,ro / mount -o remount,ro /overlay cd /tmp dd if=factory.bin bs=1M count=4 | mtd write - kernel dd if=factory.bin bs=1M skip=4 | mtd -r write - ubi Or, flash the 2nd u-boot via mtd and upload the firmware to the 2nd u-boot using tftp: 1. prepare a tftp server at 192.168.1.254 to serve the sysupgrade image: openwrt-mediatek-mt7622-xiaomi_redmi-router-ax6s-squashfs-sysupgrade.itb 2. upload the ubi-loader.itb to OpenWrt /tmp, and flash it to the old kernel partition: mtd -r write openwrt-mediatek-mt7622-xiaomi_redmi-router-ax6s-ubi-loader.itb 3. The router should reboot and flash the sysupgrade image via TFTP. Procedure for flashing from vendor firmware shouldn't change. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: linksys-e8450: improve compat warningDaniel Golle2024-03-09
| | | | | | | Include a statement about having to run the installer in the sysupgrade compat warning for the Linksys E8450 (UBI). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: re-enable mt7622-rfb1-ubi with changed partition layoutFelix Fietkau2024-02-28
| | | | | | | | | The boot loader does not have a fixed size limit for the kernel, so we're free to change the layout. This may break sysupgrade, but a fresh flash from initramfs works. Fixes: 6e2962d4c548 ("mediatek: mt7622: skip build for MT7622 rfb1 (UBI)") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: include 'fitblk' package for subtargetsDaniel Golle2024-02-26
| | | | | | | | | | If selected on a per-board base, fitblk doesn't end up in initramfs images which always only come with the subtarget's default packages. Hence fitblk needs to be included as a default package of all subtargets making use of fitblk instead of it being selected for individual boards. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: skip build also for Xiaomi AX6SDaniel Golle2024-02-17
| | | | | | | Also here build fails due to increased kernel size. Fixes: da970d63fb ("mediatek: switch to Linux version 6.1") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: skip build for MT7622 rfb1 (UBI)Daniel Golle2024-02-17
| | | | | | | | | | Due to increased kernel size the build currently fails if including the MT7622 rfb1 (UBI). Skip it for now until there is a better solution (such as replacing the bootloader and changing the flash layout). Fixes: da970d63fb ("mediatek: switch to Linux version 6.1") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: modernize Linksys E8450 / Belkin RT3200 UBI buildDaniel Golle2024-02-15
| | | | | | | | | | | | | | | | | Move fip and factory into UBI static volumes. Use fitblk instead of partition parser. !! RUN INSTALLER FIRST !! Existing users of previous OpenWrt releases or snapshot builds will have to **re-run the updated installer** before upgrading to firmware after this commit. DO NOT flash or run even just the initramfs image unless you have run the updated installer which moves the content of the 'factory' partition into a UBI volume. tl;dr: DON'T USE YET! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: convert unifi6lr-v{1,2,3}-ubootmod to fitblkDaniel Golle2024-02-15
| | | | | | No bootloader changes needed in this case, smooth transition. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: convert BPi-R64 to all-UBI layout and fitblkDaniel Golle2024-02-15
| | | | | | | Modernize bootloader and flash memory layout of the BPi-R64 similar to how it has also been done for the BPi-R3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: TOTOLINK A8000RU: add missing usb3 packageChukun Pan2024-01-14
| | | | | | This device has a usb 3.0 port, so add it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: Add support for D-Link EAGLE PRO AI R32Roland Reinl2024-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | R32 is like the M32 part of the EAGLE PRO AI series from D-Link. Specification: - MT7622BV SoC with 2.4GHz wifi - MT7975AN + MT7915AN for 5GHz - MT7531BE Switch - 512MB RAM - 128 MB flash - 2 LEDs (Status and Internet, both can be either orange or white) - 2 buttons (WPS and Reset) Compared to M32, the R32 has the following differences: - 4 LAN ports instead of 2 - The recory image starts with DLK6E6015001 instaed of DLK6E6010001 - Individual LEDs for power and internet - MAC address is stored at another offset in the ODM partition MAC addresses: - WAN MAC is stored in partition "Odm" at offset 0x81 - LAN (as printed on the device) is WAN MAC + 1 - WLAN MAC (2.4 GHz) is WAN MAC + 2 - WLAN MAC (5GHz) is WAN MAC + 3 Flashing via Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.0 - Press the reset button while powering on the deivce - Keep the reset button pressed until the internet LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Download openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-recovery.bin Flashing via uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-initramfs-kernel.bin. - You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "1. System Load Linux to SDRAM via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to RAM will start. After a few seconds OpenWrt initramfs should start - The initramfs is accessible via 192.168.1.1, change your IP address accordingly (or use multiple IP addresses on your interface) - Create a backup of the Kernel1 partition, this file is required if a revert to stock should be done later - Perform a sysupgrade using openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-squashfs-sysupgrade.bin - Reboot the device. OpenWrt should start from flash now Revert back to stock using the Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.0 - Press the reset button while powering on the deivce - Keep the reset button pressed until the internet LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Flash a decrypted firmware image from D-Link. Decrypting an firmware image is described below. Decrypting a D-Link firmware image: - Download https://github.com/RolandoMagico/firmware-utils/blob/M32/src/m32-firmware-util.c - Compile a binary from the downloaded file, e.g. gcc m32-firmware-util.c -lcrypto -o m32-firmware-util - Run ./m32-firmware-util R32 --DecryptFactoryImage <OriginalFirmware> <OutputFile> - Example for firmware R32A1_FW103B01: ./m32-firmware-util R32 --DecryptFactoryImage R32A1_FW103B01.bin R32A1_FW103B01.decrypted.bin Revert back to stock using uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides the previously created backup of the Kernel1 partition. - You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "2. System Load Linux Kernel then write to Flash via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to FLASH will start. After a few seconds the stock firmware should start again There is also an image openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-tftp.bin which can directly be flashed via U-Boot and TFTP. It can be used if no backup of the Kernel1 partition is reuqired. Flahsing via OEM web interface is currently not possible, the OEM images are encrypted. Creating images is only possible manually at the moment. The support for the M32/R32 already includes support for flashing from the OEM web interface: - The device tree contains both partitions (Kernel1 and Kernel2) with conditions to select the correct one based on the kernel command line - The U-Boot variable "boot_part" is set accordingly during startup to finish the partition swap after flashing from the OEM web interface - OpenWrt sysupgrade flashing always uses the partition where it was initially flashed to (no partition swap) Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
* image: use helper function for size unitsTony Ambardar2023-11-26
| | | | | | | | Add the make function 'exp_units' for helping evaluate k/m/g size units in expressions, and use this to consistently replace many ad hoc substitutions like '$(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE)))' in makefiles. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* treewide: fix shell errors during dump stagePetr Štetiar2023-11-13
| | | | | | | | | | | | | Fixes following issues: bash: -c: line 1: `echo 1686820180<LINUX_VERMAGIC> | /staging_dir/host/bin/mkhash md5 | cut -b1-8' bash: -c: line 1: `echo 1686820180<LINUX_VERMAGIC> | /staging_dir/host/bin/mkhash md5 | sed -E 's/(.{8})(.{4})(.{4})(.{4})(.{10})../\1-\2-\3-\4-\500/'' bash: -c: line 1: syntax error near unexpected token `|' bash: line 1: *1024*1024: syntax error: operand expected (error token is "*1024*1024") bash: line 1: (64 + ): syntax error: operand expected (error token is ")") expr: syntax error: missing argument after '+' Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: Add support for D-Link EAGLE PRO AI M32Roland Reinl2023-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - MT7622BV SoC with 2.4GHz wifi - MT7975AN + MT7915AN for 5GHz - MT7531BE Switch - 512MB RAM - 128 MB flash - 3 LEDs (red, orange, white) - 2 buttons (WPS and Reset) MAC addresses: - WAN MAC is stored in partition "Odm" at offset 0x83 - LAN (as printed on the device) is WAN MAC + 1 - WLAN MAC (2.4 GHz) is WAN MAC + 2 - WLAN MAC (5GHz) is WAN MAC + 3 Disassembly: Remove 4 screws in the bottom and 2 screws in the top (after removing the blue cover on the top), then the board can be pulled out. The pins for the serial console are already labeled on the board (VCC, TX, RX, GND). Serial settings: 3.3V, 115200,8n1 Flashing via Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.25 - Press the reset button while powering on the deivce - Keep the reset button pressed until the status LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Download openwrt-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-squashfs-recovery.bin Flashing via uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides openwrt-mediatek-mt7622-dlink_eagle-pro-ai-m32-initramfs-kernel.bin. You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "1. System Load Linux to SDRAM via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to RAM will start. After a few seconds OpenWrt initramfs should start - The initramfs is accessible via 192.168.1.1, change your IP address accordingly (or use multiple IP addresses on your interface) - Create a backup of the Kernel1 partition, this file is required if a revert to stock should be done later - Perform a sysupgrade using openwrt-mediatek-mt7622-dlink_eagle-pro-ai-m32-squashfs-sysupgrade.bin - Reboot the device. OpenWrt should start from flash now Revert back to stock using the Recovery Web Interface: - Set your IP address to 192.168.0.10, subnetmask 255.255.255.25 - Press the reset button while powering on the deivce - Keep the reset button pressed until the status LED blinks fast - Open a Chromium based and goto http://192.168.0.1 - Flash a decrypted firmware image from D-Link. Decrypting an firmware image is described below. Decrypting a D-Link firmware image: - Download https://github.com/RolandoMagico/firmware-utils/blob/M32/src/m32-firmware-util.c - Compile a binary from the downloaded file, e.g. gcc m32-firmware-util.c -lcrypto -o m32-firmware-util - Run ./m32-firmware-util M32 --DecryptFactoryImage <OriginalFirmware> <OutputFile> - Example for firmware 1.03.01_HOTFIX: ./m32-firmware-util M32 --DecryptFactoryImage M32-REVA_1.03.01_HOTFIX.enc.bin M32-REVA_1.03.01_HOTFIX.decrypted.bin Revert back to stock using uBoot: - Open the case, connect to the UART console - Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router - Run a tftp server which provides the previously created backup of the Kernel1 partition. You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later. - Power on the device and select "2. System Load Linux Kernel then write to Flash via TFTP." in the boot menu - Enter image file, tftp server IP and device IP (if they differ from the default). - TFTP download to FLASH will start. After a few seconds the stock firmware should start again There is also an image openwrt-mediatek-mt7622-dlink_eagle-pro-ai-m32-a1-squashfs-tftp.bin which can directly be flashed via U-Boot and TFTP. It can be used if no backup of the Kernel1 partition is reuqired. Flahsing via OEM web interface is currently not possible, the OEM images are encrypted and require a specific memory layout which is not compatible to the partition layout of OpenWrt. Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
* mediatek: add support for Buffalo WSR-3200AX4SINAGAKI Hiroshi2023-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WSR-3200AX4S is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7622B. Specification: - SoC : MediaTek MT7622B - RAM : DDR3 512 MiB - Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG) - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7622B (SoC) - 5 GHz : MediaTek MT7915 - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7531 - LEDs/Keys : 6x/5x (2x: buttons, 3x: slide-switches) - UART : through-hole on PCB (J4) - assignment: 3.3V, GND, TX, RX from tri-angle marking - settings : 115200n8 - Power : 12 VDC, 1.5 A Flash instruction using factory.bin image: 1. Boot WSR-3200AX4S with "Router" mode 2. Access to "http://192.168.11.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("更新実行") button 4. Wait ~120 seconds to complete flashing Note: - This device has 2x OS images on flash. The first one will always be used for booting and the secondary is for backup. - This support generates multiple factory*.bin image: - factory.bin : for flashing from OEM WebUI - factory-uboot.bin: for flashing from U-Boot or clean installation via sysupgrade (don't use for normal sysupgrade) Known issues: - Wi-Fi MAC addresses won't be applied to each adapter. MAC Addresses: LAN : C4:3C:EA:xx:xx:60 (board_data, mac (text)) WAN : C4:3C:EA:xx:xx:60 (board_data, mac (text)) 2.4 GHz: C4:3C:EA:xx:xx:61 5 GHz : C4:3C:EA:xx:xx:68 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: expand kernel size to 6MiB for WSR-2533DHP2INAGAKI Hiroshi2023-09-24
| | | | | | | | | | Expand kernel partition size on WSR-2533DHP2 for the kernel larger than 4 MiB. To prevent upgrading from old firmware before this commit, bump the compat version to 1.1 and add a message for forced sysupgrade using factory-uboot.bin image. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: merge trx helpers in image/mt7622.mkINAGAKI Hiroshi2023-09-24
| | | | | | | Merge similar helpers of trx image generation, "buffalo-kernel-trx" and "trx-nand". Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: mt7622: set DEVICE_DTC_ADDR for BPi-R64Daniel Golle2023-08-31
| | | | | | | | Relocating the device tree is required for being apply to apply device tree overylay at boot. Fixes: 34bb33094a ("mediatek: use updated device tree overlay mechanism for BPi-R64") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Ubiquiti UniFi 6 LR v3Daniel Golle2023-08-28
| | | | | | | | | Some recent models of the Ubiquiti Networks UniFi 6 LR access point come with a RealTek RTL8211FS 1000M/100M/10M PHY instead of the Aquantia AQR112 2500M/1000M/100M/10M PHY used in both v1 and v2. Add build for this variant so we can support Ethernet with the PHY. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: use DEVICE_DTC_FLAGS for BPi-R64Daniel Golle2023-06-06
| | | | | | | Make sure there is an extra 4kb of padding to apply device tree overlays on the BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: use updated device tree overlay mechanism for BPi-R64Daniel Golle2023-06-05
| | | | | | Use new device tree overlay mechanism for the BananaPi BPi-R64 board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix, clean and unify SD card image generationDaniel Golle2023-05-26
| | | | | | | Make sure sub-images on the SD card are size-checked, allow generating SD card without squashfs and/or initramfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: introduce KERNEL_LOADADDR to Device/Default templateDaniel Golle2023-04-05
| | | | | | | | | | | | | | | | | | We need to reset KERNEL_LOADADDR if we use it on a per-device base. Otherwise the previous value will be kept in case a device doesn't define KERNEL_LOADADDR and relies on the default. Move initializing KERNEL_LOADADDR to target/linux/mediatek/image/Makefile, similar to how it's done also on the ramips target. This fixes image size related breakage on devices which rely on the default value of KERNEL_LOADADDR. While at it use 0x48000000 which is more common than the previous default 0x44000000 for the filogic subtarget. Fixed: e7c399bee6 ("filogic: add support for ASUS TUF-AX4200") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Netgear WAX206Marcel Ziswiler2023-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: MediaTek MT7622BV * RAM: DDR3 512 MiB (Nanya NT5CC256M16ER-EK) * Flash: SPI-NAND 256 MiB (Toshiba TC58CVG1S3HRAIJ) * Wi-Fi 2.4/5 GHz 4T4R: * 2.4 GHz: MediaTek MT7622BV * 5 GHz: MediaTek MT7915AN/MT7975AN * Ethernet: 4x 10/100/1000 Mbps LAN, 1x 10/100/1000/2500 Mbps WAN (Realtek RTL8221B PHY) * Switch: MediaTek MT7531AE * LEDs/Keys: 8/1 (Power, Internet, LAN1, LAN2, LAN3, LAN4, Wifin and Wifia dual-colour LEDs + Reset pin) * UART: Marked J19 on board VCC GND TX RX, beginning from "1". 3.3v, 115200n8 * Power: 12 VDC, 2.5 A Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * U-Boot allows booting an initramfs image via TFTP as follows: setenv ipaddr 192.168.1.1 setenv serverip 192.168.1.100 tftpboot openwrt-mediatek-mt7622-netgear_wax206-initramfs-recovery.itb bootm Known Limitations: * The 2.5G WAN port labeled 'wan' only works for speeds up to 1G at the moment. If connected to a multi-gig port the speed has to be manually set to 1G/full either for the switch port or in OpenWrt. For example add the following to /etc/rc.local to set it on boot: /usr/sbin/ethtool -s wan speed 1000 duplex full Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References to WAX206 GPL source: https://www.downloads.netgear.com/files/GPL/WAX206_V1.0.4.0_Source.rar * openwrt/target/linux/mediatek/dts/mt7622-netgear-wax206.dts DTS file for this device. * openwrt/target/linux/mediatek/image/mt7622.mk Image creation code for this device Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [fix WAN port (1G only), adjust partition layout, adjust image creation] Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
* mt76: add stand-alone MT7622 firmware packageShiji Yang2023-01-07
| | | | | | | | | Add a separate firmware package to avoid installing the MT7615 firmware on all MT7622 target devices by default. Now we only add MT7615 firmware packages for devices that use MT7615E. This commit also removes the explicit dependency on kmod-mt7615e to refine the package dependency. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: add stand-alone MT7915 firmware packageShiji Yang2023-01-07
| | | | | | | | | The mt7915e driver supports MT7915, MT7916 and MT7986 chips. And Only MT7915 series chips need the MT7915 firmware. To save storage, extract them from the common code package and create a new package to provide the firmware. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mediatek: add support for reyee AX3200-E5Alex Hansen2022-12-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is yet another model of the Ruijie RG-EW3200GX PRO with a slightly different flash layout, install process is the same. Specifications: SoC: MT7622B RAM: 256MB Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR Ethernet: 5x1GbE Switch: MT7531BE WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) 2Keys: Mesh button + Reset button UART: Marked J19 on board. 3.3v, 115200n1 Power: 12V 2.5A Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Alex Hansen <mralexh123@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix typo in bpi-r64 image recipeDaniel Golle2022-09-08
| | | | | | | Janusz Dziedzic reported a typo introduced by a recent commit. Fix it. Fixes: 50c892d67b ("mediatek: bpi-r64: make initramfs/recovery optional") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: bpi-r64: make initramfs/recovery optionalDaniel Golle2022-09-08
| | | | | | | | | Only include recovery image in SD card image generated for the BananaPi BPi-R64 if building with CONFIG_TARGET_ROOTFS_INITRAMFS This allows to build images larger than 32 MB (the limit for initramfs/recovery image) by deselecting initramfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add Ubiquiti UniFi 6 LR v2 targetsHenrik Riomar2022-06-11
| | | | | | | | | | | | | | | Add targets: * Ubiquiti UniFi 6 LR v2 * Ubiquiti UniFi 6 LR v2 (U-Boot mod) This target does not have a RGB led bar like v1 did Used target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi as inspiration The white dome LED is default-on, blue will turn on when the system is in running state Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com>
* mediatek: new target ubnt_unifi-6-lr-v1-ubootmodHenrik Riomar2022-06-11
| | | | | | | | based on current ubnt_unifi-6-lr-ubootmod Signed-off-by: Daniel Golle <daniel@makrotopia.org> [added SUPPORTED_DEVICES for compatibility with existing setups] Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com>
* mediatek: new target mt7622-ubnt-unifi-6-lr-v1Henrik Riomar2022-06-11
| | | | | | | | | | | | Based on current mt7622-ubnt-unifi-6-lr, this is a preparation for adding a v2 version of this target * v1 - with led-bar * v2 - two simple GPIO connected LEDs (in later commits) Signed-off-by: Daniel Golle <daniel@makrotopia.org> [added SUPPORTED_DEVICES for compatibility with existing setups] Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com>
* mediatek: mt7622: add support for ELECOM WRC-X3200GST3INAGAKI Hiroshi2022-05-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-X3200GST3 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7622B. Specifications: - SoC : MediaTek MT7622B - RAM : DDR3 512 MiB (Nanya NT5CC256M16ER-EK) - Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG) - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7622B (SoC) - 5 GHz : MediaTek MT7915A - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7531 - LEDs/Keys : 6x/4x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J19: 3.3V, GND, TX, RX from power jack side - 115200n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-X3200GST3 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC Addresses: LAN : 04:AB:18:xx:xx:77 (Factory, 0x7FFF4 (hex)) WAN : 04:AB:18:xx:xx:78 (Factory, 0x7FFFA (hex)) 2.4 GHz: 04:AB:18:xx:xx:79 (Factory, 0x4 (hex)) 5 GHz : 04:AB:18:xx:xx:7A (none) Note: - currently, there is no "phy1tpt" trigger for 5 GHz wlan (MT7915) in "trigger" file of LEDs, use "phy1radio" trigger instead Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: build ubnt-ledbar as a moduleChuanhong Guo2022-04-30
| | | | | | | | The config for LEDS_UBNT_LEDBAR doesn't stay in mt7629 kconfig because of its I2C dependency. Build it as a module and let buildroot handle this config option instead. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: Add support for Xiaomi Redmi Router AX6SRichard Huynh2022-03-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also known as the "Xiaomi Router AX3200" in western markets, but only the AX6S is widely installation-capable at this time. SoC: MediaTek MT7622B RAM: DDR3 256 MiB (ESMT M15T2G16128A) Flash: SPI-NAND 128 MiB (ESMT F50L1G41LB or Gigadevice GD5F1GQ5xExxG) WLAN: 2.4/5 GHz 4T4R 2.4 GHz: MediaTek MT7622B 5 GHz: MediaTek MT7915E Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531B LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin) UART: Marked J1 on board VCC RX GND TX, beginning from "1". 3.3v, 115200n8 Power: 12 VDC, 1.5 A Notes: U-Boot passes through the ethaddr from uboot-env partition, but also has been known to reset it to a generic mac address hardcoded in the bootloader. However, bdata is also populated with the ethernet mac addresses, but is also typically never written to. Thus this is used instead. Installation: 1. Flash stock Xiaomi "closed beta" image labelled 'miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin'. (MD5: 5eedf1632ac97bb5a6bb072c08603ed7) 2. Calculate telnet password from serial number and login 3. Execute commands to prepare device nvram set ssh_en=1 nvram set uart_en=1 nvram set boot_wait=on nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit 4. Download and flash image On computer: python -m http.server On router: cd /tmp wget http://<IP>:8000/factory.bin mtd -r write factory.bin firmware Device should reboot at this point. Reverting to stock: Stock Xiaomi recovery tftp that accepts their signed images, with default ips of 192.168.31.1 + 192.168.31.100. Stock image should be renamed to tftp server ip in hex (Eg. C0A81F64.img) Triggered by holding reset pin on powerup. A simple implementation of this would be via dnsmasq's dhcp-boot option or using the vendor's (Windows only) recovery tool available on their website. Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* mediatek: add support for Ruijie RG-EW3200GX PROLanghua Ye2022-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | X32 Pro is another product name for it in the Chinese market. Specifications: - SoC: MT7622B - RAM: 256MB - Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR - Ethernet: 5x1GbE - Switch: MT7531BE - WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN - 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) - 2Keys: Mesh button + Reset button - UART: Marked J19 on board. 3.3v, 115200n1 - Power: 12V 2.5A MAC addresses as verified by OEM firmware: use address source WAN *:F4 ethaddr@product_info LAN *:F5 5g *:F6 2g *:F7 Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZEDaniel Golle2022-01-23
| | | | | | | Enable 'rootfs-part' feature to make the size of the partition of the production image configurable instead of hard-coding it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: rework and fix mt7622-rfb1-ubi supportFelix Fietkau2022-01-13
| | | | | | | | Limit bmt remapping range to cover everything up to and including the kernel image, use the rest of the flash area for ubi. Fix partition table and sysupgrade support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: add support for TOTOLINK A8000RUChuanhong Guo2021-09-03
| | | | | | | | | | | | | | | | | | Specifications: - SoC: MT7622 - RAM: 512MB - Flash: MX35LF1GE4AB 128MB SPI NAND - Ethernet: RTL8367S 5x1GbE - WiFi: 2.4G: MT7622 5G: MT7615N x2 - Other ports: USB3.0 x1 Flash instruction: *important*: upgrade vendor firmware to at least V7.1cu.643_B20200521 1. hold the reset button and power on the device. wait for about 10s before releasing the reset button. 2. upload sysupgrade.bin via u-boot recovery page on http://192.168.1.1 Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: bpi-r64: add eMMC bootloader artifactsDaniel Golle2021-05-01
| | | | | | | | In order to allow easily updating the bootloader on eMMC also provide artifacts for that. Support for updating bootloader via TFTP will be added to the loader CLI menu in a follow-up commit. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: bpi-r64: fix sdcard.img.gz in ImageBuilderDaniel Golle2021-04-23
| | | | | | | | Generating the sdcard.img.gz file requires the initramfs/recovery image to be present. Use the newly introduced 'append-image-stage' build command to fix the ImageBuilder for the BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: add spi-nand support for bananapi bpi-r64Oskari Lemmela2021-04-11
| | | | | | | | | | Some of bpi-r64 boards have serial NAND attached to SPI bus. Add SD card image support for installing openwrt to it. Default to nand upgrade if root device is not mmc block device. Separate preloader and uboot images for snand are generated. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: bpi-r64: use separate partition for emmc bootloaderOskari Lemmela2021-04-11
| | | | | | | eMMC booloader is stored to separate partition. FIP size is increased to 2MB. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: add alternative bootchain variant for UniFi 6 LRDaniel Golle2021-04-09
| | | | | | | | Builds images for the Ubiquiti Network UniFi 6 LR device running the U-Boot build added by the previous commits. Everything but MTD partitions is moved to dtsi. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: generate complete sdcard image for BPi-R64Daniel Golle2021-03-24
| | | | | | | Populate the recovery and production partitions of the generated sdcard image for the Bananapi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix broken UniFi 6 LR imageDavid Bauer2021-03-18
| | | | | | | | Ubiquiti's own bootloader expects the configuration mode to be present with a "@" instead of a "-" for the sperator character. Otherwise booting of the image fails. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: bpi-r64: use dt-overlay to select SATA or PCIE1Daniel Golle2021-03-17
| | | | | | | | | | The Bananapi BPi-R64 got a SATA interface which cannot be used at the same time as the second mPCIe slot. The decission is made by hogging GPIO 90. Embed two addtional DT overlay blobs into the image to allow bootloader selection of either SATA or PCIE1 feature. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: drop duplicate DEVICE_PACKAGESDaniel Golle2021-03-15
| | | | | | | | kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part of the target's default package set. No need to add them again for buffalo_wsr-2533dhp2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Buffalo WSR-2533DHP2INAGAKI Hiroshi2021-03-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Buffalo WSR-2533DHP2. The device uses the Broadcom TRX image format with a special magic. To be able to boot the images or load them they have to be wrapped with different headers depending how it is loaded. There are multiple ways to install OpenWrt on this device. Boot ramdisk from U-Boot ---------------------------- This will load the image and not write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux to SDRAM via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin 4. The system boots the image Write to flash from U-Boot ----------------------------- This will load the image over tftp and directly write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux Kernel then write to Flash via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin 4. The system writes this image into the flash and boots into it. Write to flash from Web UI ----------------------------- This will load the image over over the Web UI and write it into the flash 1. Open the Web UI 2. Go to "管理" -> "ファームウェア更新" 3. Select "ローカルファイル指定" and click "更新実行" 4. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin 5. The system writes this image into the flash and boots into it. Specifications ------------------- * SoC: MT7622 (4x4 2.4 GHz Wifi) * Wifi: MT7615 (4x4 5 GHz Wifi) * Flash: Winbond W29N01HZ 128MB SLC NAND * RAM 256MB * Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s) Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Powered by cgit, Themed by Ted Yin.