aboutsummaryrefslogtreecommitdiff
path: root/target/linux/mediatek/dts/mt7981b-cudy-re3000-v1.dts
Commit message (Collapse)AuthorAge
* mediatek: dts: use dt-bindings enumerated drive strength valuesShiji Yang8 days
| | | | | | | | | The Mediatek pinctrl driver can only accepts drive-strength values enumerated in "dt-bindings/pinctrl/mt65xx.h". Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/19741 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: dts: convert pinctrl bias to the Linux generic styleShiji Yang8 days
| | | | | | | | | | | | | | There are two types properties here that can control the pin bias resistors. "mediatek,pull-{up,down}-adv" and "bias-pull-{up,down}" actually do the same thing[1]. The first type is customized by the Mediatek and the second type is widely used in the Linux pinctrl framework. To avoid confusing developers, unify pinctrl bias to the new Linux generic style. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cafe19db7751269bf6b4dd2148cbfa9fbe91d651 Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/19741 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: dts: rename mt7981.dtsi to mt7981b.dtsiDaniel Golle2025-05-26
| | | | | | | | | | Upstream uses a different filename, so lets rename our downstream mt7981.dtsi to mt7981b.dtsi and update the device tree of all MT7981 boards accordingly. This is to prepare for the switch to Linux 6.12 which is going to use the upstream mt7981b.dtsi (plus some patches on top). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: strip trailing whitespaceMieczyslaw Nalewaj2025-05-20
| | | | | | | | | | | | Strip trailing whitespace in all code: find . -type f | grep "\.c$" | xargs sed -i 's/[ \t]\+$//' find . -type f | grep "\.h$" | xargs sed -i 's/[ \t]\+$//' find . -type f | grep "\.dts$" | xargs sed -i 's/[ \t]\+$//' find . -type f | grep "\.dtsi$" | xargs sed -i 's/[ \t]\+$//' Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Link: https://github.com/openwrt/openwrt/pull/18626 Signed-off-by: Robert Marko <robimarko@gmail.com>
* mediatek: filogic: fix unit name leading 0s dtc warningsShiji Yang2025-05-19
| | | | | | | | | | | | | | | | | | | | | Trim unnecessary 0s to fix the following dtc warnings: ../dts/mt7981b-cudy-re3000-v1.dts:135.20-139.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s ../dts/mt7981b-cudy-wr3000-v1.dts:153.20-157.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s ../dts/mt7981b-gatonetworks-gdsp.dts:276.20-280.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s mt7988a-rfb-spim-nor.dtso:36.21-39.7: Warning (unit_address_format): /fragment@0/__overlay__/flash@0/partition@00000: unit name should not have leading 0s ../dts/mt7981a-ubnt-unifi-6-plus.dts:113.28-131.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s ../dts/mt7981b-wavlink-wl-wn586x3.dts:147.20-151.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s ../dts/mt7981b-wavlink-wl-wn573hx3.dts:102.20-106.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s ../dts/mt7981b-yuncore-ax835.dts:161.20-165.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s ../dts/mt7986a-zyxel-ex5601-t0-stock.dts:57.39-61.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0004: unit name should not have leading 0s ../dts/mt7986a-zyxel-ex5601-t0-stock.dts:63.39-67.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0024: unit name should not have leading 0s ../dts/mt7986a-zyxel-ex5601-t0-stock.dts:69.39-73.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@002a: unit name should not have leading 0s ../dts/mt7986a-zyxel-ex5601-t0-ubootmod.dts:56.39-60.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0004: unit name should not have leading 0s ../dts/mt7986a-zyxel-ex5601-t0-ubootmod.dts:62.39-66.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0024: unit name should not have leading 0s ../dts/mt7986a-zyxel-ex5601-t0-ubootmod.dts:68.39-72.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@002a: unit name should not have leading 0s Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
* mediatek: filogic: PHY LEDs do have an address, gpio-leds don'tDaniel Golle2025-03-21
| | | | | | | | | | | | | | | | | | | | | | Other than GPIO LEDs, PHY LEDs do have an address. Fix node names such that all gpio-leds do *not* contain an '@' sign and PHY leds which do have an address also do contain the '@' sign. This is done to prevent more copy&paste'ry of non-complaint DT fragments. Fixes: 7cbe34170e ("mediatek: add support for the GL.iNet GL-MT3000") Fixes: fe10f97439 ("filogic: add support for GL.iNet GL-MT6000") Fixes: e8f7597317 ("mediatek: filogic: add support for Cudy RE3000 v1") Fixes: c9cb6411c1 ("mediatek: add support for Cudy WR3000 v1") Fixes: 7560af7647 ("mediatek: filogic: migrate ASUS TUF AX6000 to upstream PHY LED control") Fixes: 25ea7ff393 ("mediatek: filogic: migrate Acer W6/W6d to upstream PHY LED control") Fixes: d50d51d74e ("mediatek: filogic: migrate Zyxel NWA50AX Pro to upstream PHY LED control") Fixes: b88de5d507 ("mediatek: filogic: migrate Zyxel EX5700 to upstream PHY LED control") Fixes: 63d56af6c6 ("mediatek: filogic: migrate Netgate N60 to upstream PHY LED control") Fixes: fd76a38190 ("mediatek: filogic: migrate SmartRG Bonanza to upstream PHY LED control") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: add support for Cudy RE3000 v1Robert Senderek2024-02-29
MT7981B /256MB /16MB SPI (XM25QH128C) AX 2.4Ghz AX 5Ghz 160Mhz wide 1Gbit LAN OEM: root@RE3000:~# ifconfig |grep HWaddr br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 (label) br-wan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra2 Link encap:Ethernet HWaddr 82:XX:XX:28:XX:X0 rax0 Link encap:Ethernet HWaddr 82:XX:XX:38:XX:X0 rax2 Link encap:Ethernet HWaddr 82:XX:XX:58:XX:X0 OpenWrt root@OpenWrt:/# ifconfig |grep HW br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy0-ap0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy1-ap0 Link encap:Ethernet HWaddr 82:XX:XX:08:XX:X1 tftp Installation via u-boot: Connect TTL3.3V converter connector is under the radiator Set speed 115200 8 N 1 Interrupt boot process by holding down-arrow key during boot then >> 6. Load image >> 0 - TFTP client (Default) enter IP adresses and initramfs-kernel.bin write to flash via sysupgrade or gui Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
Powered by cgit, Themed by Ted Yin.