| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are two types properties here that can control the pin bias
resistors. "mediatek,pull-{up,down}-adv" and "bias-pull-{up,down}"
actually do the same thing[1]. The first type is customized by the
Mediatek and the second type is widely used in the Linux pinctrl
framework. To avoid confusing developers, unify pinctrl bias to the
new Linux generic style.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cafe19db7751269bf6b4dd2148cbfa9fbe91d651
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19741
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Update the pin-configuration as well as maximum frequency for the eMMC
flash.
- Use 26 MHz as the maximum clock of the eMMC memory
- Configure 12mA as the pin drive-strength
- Enable internal pull-reistors
Signed-off-by: Yin Ni <yin.ni@gl-inet.com>
[adapt commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
|
| |
|
|
|
|
|
|
|
|
| |
Upstream uses a different filename, so lets rename our downstream
mt7981.dtsi to mt7981b.dtsi and update the device tree of all
MT7981 boards accordingly.
This is to prepare for the switch to Linux 6.12 which is going to
use the upstream mt7981b.dtsi (plus some patches on top).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add missing #address-cells and #size-cells to fix the
following dtc warnings:
../dts/mt7986a-smartrg-bonanza-peak.dtsi:310.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
mt7986a-bananapi-bpi-r3-emmc.dtso:29.5-15: Warning (reg_format): /fragment@0/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
mt7986a-bananapi-bpi-r3-sd.dtso:23.5-15: Warning (reg_format): /fragment@0/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7986a-bananapi-bpi-r3-mini.dts:274.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-cmcc-rax3000m-emmc.dtso:48.5-15: Warning (reg_format): /fragment@3/__overlay__/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-glinet-gl-mt2500.dts:158.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7986a-glinet-gl-mt6000.dts:319.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981a-glinet-gl-x3000-xe3000-common.dtsi:142.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-huasifei-wh3000.dts:118.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7986a-jdcloud-re-cp-03.dts:171.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-nradio-c8-668gl.dts:110.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../dts/mt7981b-unielec-u7981-01-emmc.dts:26.3-13: Warning (reg_format): /soc/mmc@11230000/card@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
|
| |
|
|
|
|
| |
s/u-boot,env-layout/u-boot,env/g
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
|
| |
|
|
|
|
|
|
|
|
| |
gpio is deprecated. Found with dtc's -Wdeprecated_gpio_property
Used git grep -E $'\tgpio = <' to make the changes.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15681
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
|
The GL.iNet X3000 and XE3000 are Wi-Fi 6 5G cellular routers, based on
MediaTek MT7981A SoC. The XE3000 is the same device as the X3000,
except for an additional battery.
Specifications:
- SoC: Filogic 820 MT7981A (1.3GHz)
- RAM: DDR4 512M
- Flash: eMMC 8G, MicroSD card slot
- WiFi: 2.4GHz and 5GHz with 6 antennas
- Ethernet:
- 1x LAN (10/100/1000M)
- 1x WAN (10/100/1000/2500M)
- 5G: Quectel RM520N-GL with two nano-SIM card slots
- USB: 1x USB 2.0 port
- UART:
- 3.3V, TX, RX, GND / 115200 8N1
MAC addresses as verified by OEM firmware:
vendor OpenWrt address source
WAN eth0 label factory 0x0a (label)
LAN eth1 label + 1
2g phy0-ap0 label + 2 factory 0x04
5g phy1-ap0 label + 3
Installation via U-Boot rescue:
1. Press and hold reset button while booting the device
2. Wait for the Internet led to blink 5 times
3. Release reset button
4. The rescue page is accessible via http://192.168.1.1
5. Select the OpenWrt sysupgrade image and start upgrade
6. Wait for the router to flash new firmware and reboot
Revert to stock firmware:
1. Download the stock firmware from GL.iNet website
2. Use the method explained above to flash the stock firmware
Switch the modem network port between PCIe and USB interfaces:
1. Connect to the AT commands (/dev/ttyUSB2) port using
e.g. minicom: minicom -D /dev/ttyUSB2
2. Check the current modem mode with 'AT+QCFG="data_interface"':
- 0,0 indicates that the network port uses the USB interface
- 1,0 indicates that the network port uses the PCIe interface
3. Switch the active interface with:
- 'AT+QCFG="data_interface",0,0' to use the USB interface
- 'AT+QCFG="data_interface",1,0' to use the PCIe interface
4. Reboot
Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
|