aboutsummaryrefslogtreecommitdiff
path: root/target/linux/mediatek/dts/mt7622-netgear-wax206.dts
Commit message (Collapse)AuthorAge
* mediatek: dts: fix the broken memory nodeShiji Yang8 days
| | | | | | | | | | | | | | Add the missing "device_type" property to fix the memory node. The Linux kernel can not get the memory size without it. Though u-boot can automatically fixup the memory node by adding the "device_type" and "reg" properties if the CONFIG_ARCH_FIXUP_FDT_MEMORY symbol is enabled, it's better not to rely on this optional feature. This patch also adds the reg address for the memory node name to follow the naming rules. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Link: https://github.com/openwrt/openwrt/pull/19741 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: mt7622: add the missing phy interrupt-parent for WAX206Shiji Yang2025-05-19
| | | | | | | | | Based on other mt7622 dts, it is not difficult to infer that the missing interrupt controller is "pio". Fix dtc warning: mt7622.dtsi:282.3-26: Warning (interrupts_property): /ethernet@1b100000/mdio-bus/ethernet-phy@7:#interrupt-cells: size is (8), expected multiple of 12 Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
* mediatek-mt7622: netgear-wax206 fix wifi ledsFlorian Maurer2025-01-24
| | | | | | | | | | the wifi leds of the wax206 were not reacting. This patch enables the green leds to show activity, as the blue ones are very bright. Also set the label-mac to the gmac0 Signed-off-by: Florian Maurer <f.maurer@outlook.de> Link: https://github.com/openwrt/openwrt/pull/17694 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: correct address of MT753x switch ICMieczyslaw Nalewaj2024-05-09
| | | | | | | | Continuation of commit 8b66f1a. Set the switch address on the MDIO bus to 31. This is required for all boards currently working with the mt7530 DSA driver. Fixes: #15419 Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* mediatek: disable btif for mt7622 devicesFelix Fietkau2024-01-09
| | | | | | It breaks built-in SoC WLAN. Can be re-enabled after we've figured out the cause Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: convert to nvmem-layoutRosen Penev2023-11-25
| | | | | | Will allow removing mac-address-increment. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mediatek: no longer hard-code WAN PHY of Netgear WAX206Daniel Golle2023-04-30
| | | | | | | | The RealTek 2.5G PHY providing the WAN port of the Netgear WAX206 has previously been hard-coded in the device tree. Now that the PHY can be probed correctly also via Clause-45 MDIO, use that instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: remove label = "cpu" from DSA dt-bindingArınç ÜNAL2023-02-26
| | | | | | | This is not used by the DSA dt-binding, so remove it from all devicetrees. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9cc115d8d6f73dd260de1609182f3645844d6907 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* mediatek: add support for Netgear WAX206Marcel Ziswiler2023-02-18
Specifications: * SoC: MediaTek MT7622BV * RAM: DDR3 512 MiB (Nanya NT5CC256M16ER-EK) * Flash: SPI-NAND 256 MiB (Toshiba TC58CVG1S3HRAIJ) * Wi-Fi 2.4/5 GHz 4T4R: * 2.4 GHz: MediaTek MT7622BV * 5 GHz: MediaTek MT7915AN/MT7975AN * Ethernet: 4x 10/100/1000 Mbps LAN, 1x 10/100/1000/2500 Mbps WAN (Realtek RTL8221B PHY) * Switch: MediaTek MT7531AE * LEDs/Keys: 8/1 (Power, Internet, LAN1, LAN2, LAN3, LAN4, Wifin and Wifia dual-colour LEDs + Reset pin) * UART: Marked J19 on board VCC GND TX RX, beginning from "1". 3.3v, 115200n8 * Power: 12 VDC, 2.5 A Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * U-Boot allows booting an initramfs image via TFTP as follows: setenv ipaddr 192.168.1.1 setenv serverip 192.168.1.100 tftpboot openwrt-mediatek-mt7622-netgear_wax206-initramfs-recovery.itb bootm Known Limitations: * The 2.5G WAN port labeled 'wan' only works for speeds up to 1G at the moment. If connected to a multi-gig port the speed has to be manually set to 1G/full either for the switch port or in OpenWrt. For example add the following to /etc/rc.local to set it on boot: /usr/sbin/ethtool -s wan speed 1000 duplex full Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References to WAX206 GPL source: https://www.downloads.netgear.com/files/GPL/WAX206_V1.0.4.0_Source.rar * openwrt/target/linux/mediatek/dts/mt7622-netgear-wax206.dts DTS file for this device. * openwrt/target/linux/mediatek/image/mt7622.mk Image creation code for this device Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [fix WAN port (1G only), adjust partition layout, adjust image creation] Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
Powered by cgit, Themed by Ted Yin.