| Commit message (Collapse) | Author | Age | |
|---|---|---|---|
| * | mediatek: correct address of MT753x switch IC | Daniel Golle | 2024-04-24 |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all boards currently working with the mt7530 DSA driver we can be sure that the address of the switch on the MDIO bus is 31 -- simply because that address is hard-coded in the driver and the address from the Device Tree is being ignore. An upcoming patch will add support for MT753x ICs which are programmed to addresses different from 0x1f using bootstrap pins. As a result the address from the Device Tree will then be taken into account, which will break currently working boards which got the address set to anything else than 31. While at it also unify the syntax in Device Tree to always us a decimal value for the 'reg' property. * mt7622-buffalo-wsr-3200ax4s.dts Cosmetic change 'reg = <0x1f>' -> 'reg = <31>' * mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi Wrong address: 0 -> 31 * mt7622-elecom-wrc-x3200gst3.dts Wrong address: 0 -> 31 * mt7622-linksys-e8450.dtsi Wrong address: 0 -> 31 * mt7622-ruijie-rg-ew3200.dtsi Wrong address: 0 -> 31 * mt7622-xiaomi-redmi-router-ax6s.dts Wrong address: 0 -> 31 * mt7629-iptime-a6004mx.dts Wrong address: 2 -> 31 * mt7981b-zbtlink-zbt-z8102ax.dts Cosmetic change 'reg = <0x1f>' -> 'reg = <31>' Signed-off-by: Daniel Golle <daniel@makrotopia.org> | ||
| * | mediatek: add support for Buffalo WSR-3200AX4S | INAGAKI Hiroshi | 2023-09-24 |
| Buffalo WSR-3200AX4S is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7622B. Specification: - SoC : MediaTek MT7622B - RAM : DDR3 512 MiB - Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG) - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7622B (SoC) - 5 GHz : MediaTek MT7915 - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7531 - LEDs/Keys : 6x/5x (2x: buttons, 3x: slide-switches) - UART : through-hole on PCB (J4) - assignment: 3.3V, GND, TX, RX from tri-angle marking - settings : 115200n8 - Power : 12 VDC, 1.5 A Flash instruction using factory.bin image: 1. Boot WSR-3200AX4S with "Router" mode 2. Access to "http://192.168.11.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("更新実行") button 4. Wait ~120 seconds to complete flashing Note: - This device has 2x OS images on flash. The first one will always be used for booting and the secondary is for backup. - This support generates multiple factory*.bin image: - factory.bin : for flashing from OEM WebUI - factory-uboot.bin: for flashing from U-Boot or clean installation via sysupgrade (don't use for normal sysupgrade) Known issues: - Wi-Fi MAC addresses won't be applied to each adapter. MAC Addresses: LAN : C4:3C:EA:xx:xx:60 (board_data, mac (text)) WAN : C4:3C:EA:xx:xx:60 (board_data, mac (text)) 2.4 GHz: C4:3C:EA:xx:xx:61 5 GHz : C4:3C:EA:xx:xx:68 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> | |||