aboutsummaryrefslogtreecommitdiff
path: root/target/linux/ipq806x
Commit message (Collapse)AuthorAge
* ipq806x: fix dts error in LED color/function conversionChristian Marangi2024-02-08
| | | | | | | | Fix DTS error in LED color/function conversion due to a bug in the conversion script. Fixes: 33e796232911 ("ipq806x: convert to new LED color/function format where possible") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: convert to new LED color/function format where possibleChristian Marangi2024-02-07
| | | | | | | | Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport at803x split patchesChristian Marangi2024-02-01
| | | | | | | | | | | | | | Backport at803x split patches merged upstream to tidy things up for the at803x PHY driver. New Kernel config are introduced hence any user needs to be updated. Downstream ipq40xx patch require rework to correctly move them to the qcom specific PHY directory. All affected patch automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: drop swconfig leftoversAleksander Jan Bajkowski2024-01-26
| | | | | | | | They are unnecessary since ipq806x switched to DSA in the commit 337e36e0ef988d850105cfa5f7588e36d90aef2b. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ipq806x: replace tsens patch with upstream versionChristian Marangi2024-01-21
| | | | | | Replace tsens patch with upstream version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: renumber backport patches starting from 000Christian Marangi2024-01-21
| | | | | | | | | Renumber backport patches starting from 000 to tidy things up. Also fix patch name format for the mmc backport patch. Refresh patches affected by this renumber change. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: move stmmac backport fix patches to genericChristian Marangi2024-01-21
| | | | | | | | | | | | | Move stmmac backport fix patches from ipq806x to generic backport directory as they got merged upstream and they fix wide performance regression. This will eventually cause performance increase on any user of the stmmac driver. Generic patch automatically refreshed with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: DTS format fixup for Fortinet FAP-421EChristian Marangi2024-01-16
| | | | | | Small clanup and fixup for DTS format for Fortinet FAP-421E. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: Stabilize LAN 2 MAC address, interface orderingBryan Berg2024-01-15
| | | | | | | | | | | | | | | Part 1 of #13629 split. * Sets the LAN 2 MAC address in the DTS by deriving it from LAN 1's address. The factory OS derives this from the `eth1addr` u-boot env variable, but the nvmem_u-boot-env driver doesn't support parsing MAC addresses from fields other than `ethaddr`. But for all of the device samples I've checked (~10) it derives the correct MAC. * Updates 02_network to ensure that interfaces are assigned to roles correctly and consistently. Signed-off-by: Bryan Berg <bdb@north-eastham.org>
* ipq806x: add support for Fortinet FAP-421EJinGen Lim2024-01-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8064 RAM: 235MB Flash: 128MB NAND (Micron MT29F1G08ABBDAH4) 32MB SPI-NOR (Spansion FL256SAIFRO) WLAN2: Qualcomm Atheros QCA9980 WLAN5: Qualcomm Atheros QCA9980 ETH: LAN1 - Atheros AR8035 LAN2 - Atheros AR8033 USB: USB-A, 2.0 LED: Power (yellow/amber) LAN1 (yellow/amber) LAN2 (yellow/amber) WLAN2G (yellow) WLAN5G (yellow) BTN: Reset Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage MAC Address: LAN1 (label) at APPSBL partition LAN2: label + 1 WLAN2: label + 8 WLAN5: label + 16 Installation ------------ Connect to the RJ45 console (TTL) Connect LAN1 to host, set host ip as 192.168.1.10 Start a tftp server to serve the initramfs image Open console connection (9600n8) Connect power through the DC jack `Hit any key to stop autoboot: 5`: press any key `Enter G,Q,or H:`: press `K` to access the hidden option `Enter password:`: `fap22b1!$` to access a limited u-boot console `(FAP) #`: `tftpboot your_initramfs_image_name.itb` `(FAP) #`: `bootm` Once OpenWrt has booted, install the firmware through sysupgrade Signed-off-by: JinGen Lim <openwrt@sn.sg>
* kernel: bump 6.1 to 6.1.70John Audia2024-01-02
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.70 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.69John Audia2023-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69 Removed upstreamed: generic/backport-6.1/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1] generic/backport-6.1/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2] generic/backport-6.1/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3] generic/backport-6.1/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4] generic/backport-6.1/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=893597cbabfbc00ee51fd5f73e2028994f49ded6 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=1d82735f4bae954d5ba004994b96baec791f874f 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=4c2ad8e39c62c5288ca31ebf5c30e34f3bd9d044 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=325556d46bfd13a2fa0d304d0625be86821fd683 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=cac1218b32d7b56832dd36f7baf82f123f305a2a Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.68John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68 Removed upstreamed: generic/backport-6.1/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.68&id=3759e735562a31e44fee825498f05c06e64b25a8 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq806x: drop useless uci-defaults compat version scriptChristian Marangi2023-12-12
| | | | | | | | | | | | | | Drop useless uci-defaults compat version script as it's not needed anymore and should have been dropped on DSA conversion. The script was needed for Linksys EA7500 and EA8500 for the kernel space migration. We now handle compat version setting in board.d scripts. Having this script with actually the wrong value (2.0) cause upgrade problem and conflicts with board.d script. Fixes: 337e36e0ef98 ("ipq806x: convert each device to DSA implementation") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: fix leading 0 warningsRosen Penev2023-12-09
| | | | | | dtc warns about leading 0s. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq806x: avoid duplicate partition nodesRosen Penev2023-12-09
| | | | | | Avoids dtc warnings by moving it in a subnode. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq806x: reset-gpio to reset-gpiosRosen Penev2023-12-09
| | | | | | The former is deprecated. Fixes dtc warning. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq806x: Fix nighthawk R7800/XR450/XR500 wan MACHannu Nyman2023-12-06
| | | | | | | | | | Correct the NVMEM mac-base field usage to read the wan MAC correctly from flash. Reference to discussion at https://github.com/openwrt/openwrt/pull/13952#issuecomment-1842749122 Fixes: d264d3a60 ("ipq806x: remove mac-address-increment") Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: bump 6.1 to 6.1.64John Audia2023-11-29
| | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64 Removed upstreamed: ixp4xx/patches-6.1/0001-mtd-cfi_cmdset_0001-Byte-swap-OTP-info.patch[1] mvebu/patches-6.1/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[2] qualcommax/patches-6.1/0026-v6.7-clk-qcom-ipq8074-drop-the-CLK_SET_RATE_PARENT-flag-f.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=3b93096d29c5b9ca2af94be4ee9949c1767acf17 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=b3fd9db79e30d5eb5f76ef1f5b7e4f444af574ea 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=877080a3490102da26b8d969588159b2385f739e Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq806x: add missing interrupt-controllerRosen Penev2023-11-22
| | | | | | Fixes dtc warnings Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq806x: remove mac-address-incrementRosen Penev2023-11-22
| | | | | | It's deprecated. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq806x: fix wrong LEDs mode for non-standard qca8k LEDsChristian Marangi2023-11-15
| | | | | | | | | | | | There was a typo in the LED definition for the mode of non-standard qca8k LEDs. Mode for link speed was wrongly set to link-10 link-100 link-1000 while the real mode in sysfs is link_10 link_100 and link_1000. Fix the entry to the correct mode. Fixes: c707cff6c94b ("ipq806x: add LEDs definition for non-standard qca8k LEDs") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: setup DSA port conduit in board.dChristian Marangi2023-11-10
| | | | | | | | | | | | Now that netifd and uci-defaults.sh supports a way to setup DSA port conduit without using iproute2 tool, set DSA port conduit directly in board.d, that will fill board.d and will instruct netifd to setup the port. Drop special init.d qca8k_set_port script and ip-tiny from target dep as they are not required anymore. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.60John Audia2023-10-26
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.60 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.59John Audia2023-10-21
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.59 Manually rebased: bcm27xx/patches-6.1/950-0124-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch Removed upstreamed: generic/backport-6.1/781-v6.6-02-net-dsa-qca8k-fix-potential-MDIO-bus-conflict-when-a.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.59&id=881050b25b1dda7b0f14d40d1b09bf38cb3b427c Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq806x: fix broken onhub dtsiChristian Marangi2023-10-09
| | | | | | | | | | Fix broken onhub dtsi. The gmac node have a redundant phy-handle that doesn't point to the swconfig phy node as they got dropped in the DSA conversion. Drop these extra binding to restore correct compilation of this subtarget. Fixes: 337e36e0ef98 ("ipq806x: convert each device to DSA implementation") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: fix wrong QCA8K LED definition for NEC Aterm WG2600HP3Christian Marangi2023-10-05
| | | | | | | | | | | Fix copy-paste error in migrating NEC Aterm WG2600HP3 to new LED implementation for the QCA8K switch. Correct define the missing additional LED pin used for each port and fix wrong color for LED 2 for each port. Also add the required function-enumerator as all 3 LED have the same color and function. Fixes: c707cff6c94b ("ipq806x: add LEDs definition for non-standard qca8k LEDs") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add support for Extreme Networks AP3935Glen Lee2023-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extreme Networks AP3935i/e - https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/ SoC: IPQ8068 QYY AT46279K45060I RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW FLASH: NOR - S25FL256S1 - 32MB NAND - Macronix MX30UF4G28AB - 512MB LAN: Atheros AR8035-A J5150WL 1515 CN - RGMII LAN2: Atheros AR8033-AL1A SKCSR.AJ1 1444 China - SGMII WLAN2: QCA9990 OVV FNPV209 K451406 WLAN5: QCA9990 OVV FNPV209 K451406 SERIAL: RS232 Port (115200 8n1) Cisco console cable and 4pin Serial Header | 3.3 | GND | RX | TX MAC address for LAN1/LAN2/WLAN 2G/WLAN 5G in uboot env * Installation via either RJ45 console or on-board 4 PIN header Install Method -------------- 1) Setup TFTP server, and place openwrt-ipq806x-generic-extreme_ap3935-initramfs-uImage image in /srv/tftp or similar 2) Connect to console on router and connect ethernet port "LAN1" to your LAN 3) Interupt the boot with any character 4) Login with admin/new2day for default password (use reset/FactoryDefault if password needs to be reset) 5) Set serverip to TFTP IP: set serverip 192.168.1.2 6) Set ipaddr to another IP: set ipaddr 192.168.1.101 7) Make uboot ping something to activate eth0 on boot: set bootcmd 'ping 192.168.1.1; run boot_flash' saveenv 8) TFTP image to RAM: tftpboot 0x42000000 openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage 9) Boot image: bootm 0x42000000 In OpenWRT, "LAN1" is LAN, "LAN2" is WAN 10) SFTP openwrt-ipq806x-generic-extreme_ap3935-squashfs-nand-sysupgrade.bin image to /tmp 11) sysupgrade /tmp/openwrt-*-nand-sysupgrade.bin Signed-off-by: Glen Lee <g2lee@yahoo.com>
* ipq806x: disable unused SWCONFIG config flagsChristian Marangi2023-09-30
| | | | | | | Disable unused SWCONFIG config flags now that we switched to DSA and are not needed anymore. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add LEDs definition for non-standard qca8k LEDsChristian Marangi2023-09-30
| | | | | | | | | | Add LEDs definition for devices that use a non-standard qca8k LEDs configuration. This is to restore original setup of the LED and be on par with swconfig old configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: enable and setup multi-CPU port for qca8k switchChristian Marangi2023-09-30
| | | | | | | | | | | | | | | | | Enable and setup multi-cpu for qca8k switch for ipq806x based devices. Rework each DTS to enable the secondary CPU port on QCA8K switch and apply the required values originally set by the OEM in the old swconfig node. In original firmware the first CPU port was always assigned to the WAN port and the secondary CPU port was assigned to the rest of the LAN port. Follow this original implementation using an init.d script. To setup the CPU port ip tools is required. Add additional default package ip-tiny to correctly setup the CPU port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: move ASRock G10 fix mac preinit script to generic board.d scriptChristian Marangi2023-09-30
| | | | | | | | Drop and move ASRock G10 preinit script to fix mac address to generic board.d script and rework for consistency with other devices following a similar implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: convert each device to DSA implementationChristian Marangi2023-09-30
| | | | | | | | | | | Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: sync config-6.1 with latest kernelGlen Lee2023-09-24
| | | | | Ran "make kernel_oldconfig" to generate Signed-off-by: Glen Lee <g2lee@yahoo.com>
* kernel: bump 6.1 to 6.1.54John Audia2023-09-23
| | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.54 Removed upstreamed: generic/backport-6.1/020-v6.3-02-UPSTREAM-mm-multi-gen-LRU-rename-lrugen-lists-to-lru.patch[1] ipq806x/patches-6.1/140-v6.5-hwspinlock-qcom-add-missing-regmap-config-for-SFPB-M.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.54&id=a73d04c460521e45f257d28d73df096e41ece324 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.54&id=e93bc372dbc0bde133c854c03502a95617041972 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq806x: Correct OnHub sysupgrade config logicBrian Norris2023-09-12
| | | | | | | | | | There's a typo in here: board_name is a function, not a variable. This issue was pointed out on the OpenWrt forum. Closes: #13409 Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* kernel: backport v6.6 nvmem changesRafał Miłecki2023-08-31
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: onhub: Enable adm_dma nodeBrian Norris2023-08-27
| | | | | | | | | | One of our SPI devices references this node, but we never enabled it. This clutters up probe deferral logs. (NB: this SPI device still doesn't have a real driver, so it's just here for documentation and/or tinkering.) Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ipq806x: chromium: Disable kernel's CONFIG_QCOM_SPMBrian Norris2023-08-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qcom spm driver is currently broken for IPQ8064 OnHub devices on kernel 6.1, such that it hangs the system when booting, much to the consternation of users. This is especially bad as these devices don't yet have a fully-supported release branch, and are still sometimes landing on snapshot builds. OnHub devices have their own kernel config, so it's not that wide of an impact to disable this. I haven't fully gotten to the bottom of this, but: (a) The vendor kernel didn't have any SPM driver at all, and didn't utilize cpuidle. (b) The device tree has never included any (non-disabled) cpuidle states, so even when this driver was present on 5.15 (last known-working kernel), it didn't actually do anything -- it bailed early, before ever doing any SPM initialization. (c) Refactoring in Linux 5.16 [1] caused the SPM driver to be activated unconditionally, including setting us into standby mode (PM_SLEEP_MODE_STBY) by default. Removing the one PM_SLEEP_MODE_STBY line from drivers/soc/qcom/spm.c seems to fix the problem, but that isn't much different than simply disabling the driver, so I go with that for now. I also disable CONFIG_ARM_QCOM_SPM_CPUIDLE, becuase it 'select's QCOM_SPM. NB: it's possible there's some other deeper root cause involved in here. For one, I notice that CPU hotplug (e.g., echo 0 > /sys/devices/system/cpu/cpu1/online, echo 1 > ...) doesn't work right either. Perhaps there's some mismatch on upstream Linux qcom-scm behavior and the old boot firmware used for these systems? It wouldn't be the first time, as we've had some similar incompatibilities on the next generation of these devices, Google WiFi [2]. [1] Commit 60f3692b5f0b ("cpuidle: qcom_spm: Detach state machine from main SPM handling") [2] [RFC] qcom_scm: IPQ4019 firmware does not support atomic API? https://lore.kernel.org/linux-arm-kernel/20200913201608.GA3162100@bDebian/ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* kernel: bump 6.1 to 6.1.44John Audia2023-08-09
| | | | | | | | | | | | Changelog: https://lore.kernel.org/stable/2023080822-repost-unfiled-2f01@gregkh/ All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq806x: reorganize 02_network board.d scriptChristian Marangi2023-07-21
| | | | | | | Reorganize 02_network board.d script by splitting setup switch and setup mac address. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: rename kernel files to generic nameChristian Marangi2023-07-21
| | | | | | | Drop 6.1 tag from files directory for ipq806x now that we moved to 6.1 by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: drop useless kernel patches and dts filesChristian Marangi2023-07-21
| | | | | | | Drop useless 5.15 kernel patches and files now that we moved to kernel 6.1 by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: move to kernel 6.1 by defaultChristian Marangi2023-07-21
| | | | | | Move to kernel 6.1 by default in preparation for DSA introduction. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: backport patch fixing broken hwspinlockChristian Marangi2023-07-21
| | | | | | | Backport merged patch fixing broken hwspinlock due to missing regmap config for SFPB MMIO implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.37John Audia2023-07-05
| | | | | | | | | | Manually rebased: generic/hack-6.1/220-arm-gc_sections.patch armsr/patches-6.1/221-armsr-disable_gc_sections_armv7.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: migrate FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER for 6.1Stefan Kalscheuer2023-06-25
| | | | | | | | | | The flag FORCE_MAX_ZONEORDER was renamed to ARCH_FORCE_MAX_ORDER in Kernel 6.1 [1]. Rename the flag in generic Kconfig and remove it from target configs. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0192445cb2f7ed1cd7a95a0fc8c7645480baba25 Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* ipq806x: 6.1: restore missing dts for Netgear XR450Christian Marangi2023-06-17
| | | | | | | | | | | | | In pushing and refreshing 6.1 pull request, dbac8e8819dd ("ipq806x: 6.1: copy patches, files and config from 5.15") wasn't correctly updated and resulted in missing the dts for Netgear XR450. This caused compilation error with Netgear R7800 or XR500 if testing kernel version was used. Fix this by adding back the missing dts for Netgear XR450 from kernel 5.15. Fixes: dbac8e8819dd ("ipq806x: 6.1: copy patches, files and config from 5.15") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.