openwrt.git - OpenWrt Source Repository

	Commit message (Collapse)	Author	Age
*	ipq806x: add support for TP-Link Archer VR2600v	Sebastian Quilitz	2016-11-24
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This router is similar to the C2600. Ethernet on WAN + LAN, switch, sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem and the POTS/DECT interface are not supported yet. It is not possible to flash LEDE via the TP-Link webinterface. The image need to be signed. The first 0x200 bytes of the image is the TP-Link header including the signature. The signature is not validated by the bootloader. The LEDE image is zeroed in this area. To install LEDE it is necessary to solder a four pin header to JP2. Connect a serial interface to this header and interrupt the autostart of kernel. Transfer the sysupgrade image via TFTP and write it to the serial flash at 0x320000. Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
*	ipq806x/nbg6817: add support for ZyXEL NBG6817	André Valentin	2016-10-26
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	CPU: 2x1.8GHz ARM, RAM: 512MiB Storage: 4MiB serial Flash, 3.9GiB MMC NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin to device. Then run: cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 reboot -f For debugging serial console is easily visible on board, no soldering needed. Signed-off-by: André Valentin <avalentin@marcant.net>
*	ipq806x: fix wlan mac for Netgear R7800	Pavel Kubelun	2016-10-06
\| \| \| \|	Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
*	ipq806x: Build image for Netgear Nighthawk X4 R7500v2	Alexis Green	2016-08-22
\| \| \| \| \| \|	Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
*	ipq806x: enable ieee80211 phy hotplug and patch macaddress	Adrian Panella	2016-06-22
\| \| \| \| \| \| \| \|	Calibration data for QCA99x0 in this device has bogus macaddress. The data cannot be modified directly, as it breaks checksum control. Instead change the macaddress from phy add hotplug event. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
*	ipq806x: add initial support for Netgear R7800	Pavel Kubelun	2016-06-22
\| \| \| \|	Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
*	ipq806x: base-files: add support for Linksys EA8500	Adrian Panella	2016-06-13
\| \| \| \|	Signed-off-by: Adrian Panella <ianchi74@outlook.com>
*	ipq806x/base-files: extract ath10k caldata	Ash Benz	2016-05-27
	Signed-off-by: Ash Benz <ash.benz@bk.ru>