aboutsummaryrefslogtreecommitdiff
path: root/target/linux/generic
Commit message (Collapse)AuthorAge
* kernel: bump 6.1 to 6.1.78John Audia2024-02-18
| | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.78 Manually rebased: bcm27xx/patches-6.1/950-0865-usb-dwc3-Set-DMA-and-coherent-masks-early.patch bcm27xx/patches-6.1/950-0124-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: nvmem: correctly assign fwnode to MMC block deviceDaniel Golle2024-02-18
| | | | | | | | | | Use device_set_node to make sure OF node gets assigned on block devices to be used as NVMEM providers. While block partitions were already working fine as NVMEM providers, bare block devices such as mmcblk0boot1 will not work without this change. Fixes: fc153aa8d9 ("kernel: import pending patches adding support for NVMEM on UBI and MMC") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add driver for Airoha EN8811H PHY as moduleDaniel Golle2024-02-15
| | | | | | | | Add PHY driver for Airoha EN8811H PHY and package it as kernel module. The PHY needs to load firmware from rootfs, so there is no point in having the driver built-into the kernel. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: switch to pending XFI 10G Ethernet driversDaniel Golle2024-02-15
| | | | | | | | | Replace previous patch adding paths and SerDes modes with patch series pending upstream adding dedicated drivers for XFI T-PHY and USXGMII PCS, extends LynxI PCS to be a standalone platform driver and as a consequence makes much less changes to the actual Ethernet driver mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport phylink changes from mainline LinuxDaniel Golle2024-02-15
| | | | | | | Let's pick a bunch of useful phylink changes which allow us to keep drivers in sync with mainline Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add pending fitblk uImage.FIT sub-image block driverDaniel Golle2024-02-15
| | | | | | | | | Add 'fitblk' driver to replace the rejected/deprecated uImage.FIT partition parser. To use the new driver, add phandle /chosen/rootdisk and point it to the MTD partition, UBI volume or block device holding the uImage.FIT. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: import pending patches adding support for NVMEM on UBI and MMCDaniel Golle2024-02-15
| | | | | | | Similar to supporting nvmem-layouts on MTD devices, also allow referencing UBI and MMC devices in DT. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: move uImage.FIT partition parser to mediatek targetDaniel Golle2024-02-15
| | | | | | | | | | The partition parser approach has been rejected upstream, it will be replaced by a small block driver which is the solution suggestion by upstream maintainers. As the partition parser has only been used by the mediatek target, as a first step, move it there. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: 6.1: backport UBI device model improvementsDaniel Golle2024-02-15
| | | | | | | | Backport two commits from Linux 6.3 wiring up device node parents of ubi devices (pointing to their MTD parent) as well as ubiblock devices (poiting to their parent UBI volume). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.1: use upstreamed QCA807x fixupRobert Marko2024-02-15
| | | | | | | Now that QCA807x interface mode check was upstreamed, use the upstreamed version and mark it as such. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: fix bidirectional hardware flow offloadFelix Fietkau2024-02-14
| | | | | | Fix a bug that was introduced upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: 6.1: fixup QCA807x upstream PHYRobert Marko2024-02-12
| | | | | | | | | | | | | | | Currently, we are checking whether the PHY package mode matches the individual PHY interface modes at PHY package probe time, but at that time we only know the PHY package mode and not the individual PHY interface modes as of_get_phy_mode() that populates it will only get called once the netdev to which PHY-s are attached to is being probed and thus this check will always fail and return -EINVAL. So, lets move this check to .config_init_once as at that point individual PHY interface modes should be populated. Fixes: 16364e410039 ("generic: 6.1: backport QCA807x PHY patches") Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: backport QCA807x PHY patchesChristian Marangi2024-02-11
| | | | | | | | | | | | Backport QCA807x PHY patches merged upstream that introduce the new concept of PHY package. Also add in generic config the new Kconfig CONFIG_QCA807X_PHY. All affected patch automatically refreshed with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: move LEDs netdev trigger patch from pending to backportChristian Marangi2024-02-11
| | | | | | | Move LEDs netdev trigger patch from pending to backport as it has been merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport Aquantia PHY endianess patchChristian Marangi2024-02-11
| | | | | | | | | Backport Aquantia PHY endianess patch. While the current implementation works ok for Little-Endian targets, backport patch to prevent any kind of malfunction if in the future we will have Big-Endian target with Aquantia PHYs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.77John Audia2024-02-08
| | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.77 Removed upstreamed: generic/backport-6.1/707-v6.8-01-net-phy-at803x-fix-passing-the-wrong-reference-for-c.patch[1] generic/backport-6.1/796-v6.8-ipmr-fix-kernel-panic-when-forwarding-mcast-packets.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.77&id=7dc0fefd37dd5fb03fdac6e3e01b1c2291148ccb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.77&id=d2f1b7fe74afd66298dbb3c7b39e7b62e4df1724 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.76John Audia2024-02-08
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.76 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport patch fixing kernel panic with mcast packetsChristian Marangi2024-02-05
| | | | | | | | | Backport patch fixing kernel panic with mcast packets, patch is already scheduled to be backported to stable kernels and will be dropped once new stable kernel version are released. Fixes: #14554 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch to enable PHYLIB_LEDS kconfig dynamicallyChristian Marangi2024-02-05
| | | | | | | | | | Backport patch to enable PHYLIB_LEDS kconfig dynamically instead of having to select this config for every target that makes use of PHY LEDs API. All affected patch are automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: 6.1: add bcm27xx video symbolsÁlvaro Fernández Rojas2024-02-05
| | | | | | Add missing Raspberry Pi video symbols. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: 6.1: add even more missing Kconfig for video-coreChristian Marangi2024-02-04
| | | | | | | | Add even more missing Kconfig for video-core introduced by recent fixup to video kmods. Fixes: 76b0d24157f2 ("kernel: modules: video: fix video-core for 6.1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add patch fixing bugs with LED netdev triggerChristian Marangi2024-02-04
| | | | | | | | | Backport one patch merged upstream that prevent a deadlock for LED netdev trigger and add a pending patch that fix kernel panic on interface rename trigger notification with invalid dev. Fixes: #14477 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add missing Kconfig for video-coreChristian Marangi2024-02-03
| | | | | | | | Add missing Kconfig for video-core introduced by recent fixup to video kmods. Fixes: 76b0d24157f2 ("kernel: modules: video: fix video-core for 6.1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: replace ipq40xx MDIO patch with upstream versionChristian Marangi2024-02-03
| | | | | | | Replace ipq40xx MDIO patch with upstream version now that the driver part got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport LED fixes for qca808x PHYChristian Marangi2024-02-03
| | | | | | Backport LED fixes for qca808x PHY to restore correct functionality. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* broadcom-wl: remove packageFelix Fietkau2024-02-03
| | | | | | | Also remove remaining wireless extension support, since this package was the only in-tree user of it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: modules: video: fix video-core for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 wraps core video drivers in a MEDIA_PLATFORM_DRIVERS submenu. Enable that for 6.1 and add some new necessary undefines to target/linux/generic/config-6.1 to avoid build failures. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: bump 5.15 to 5.15.148John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.148 Removed upstreamed: generic/hack-5.15/321-powerpc_crtsavres_prereq.patch[1] Manually rebased: target/linux/octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.148&id=0b11a145eb00d51f7ef18cfcae587b93f9adb1e9 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit?h=v5.15.148&id=b67064bd372300a75293efbbc70624996dccffd4 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.75John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.75 Removed upstreamed: generic/hack-6.1/321-powerpc_crtsavres_prereq.patch[1] generic/pending-6.1/540-ksmbd-only-v2-leases-handle-the-directory.patch[2] Rebased: bcm27xx/patches-6.1/950-0670-fbdev-Don-t-cancel-deferred-work-if-pagelist-empty.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=16b88e68b85d5520c28498bb847358ff6300cb90 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/fs/smb?h=v6.1.75&id=c866866c795296d3637ab0d48a3d8a3ef5d6f4a3 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=81f444f22816a82ada2cc787a2845cffc8c584a6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport PHY package MMD patchChristian Marangi2024-02-01
| | | | | | | | | | Backport PHY package MMD patch merged upstream that add support for writing MMD regs for the PHY package and support for writing to PHY package at an offset. All affected patches automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport at803x split patchesChristian Marangi2024-02-01
| | | | | | | | | | | | | | Backport at803x split patches merged upstream to tidy things up for the at803x PHY driver. New Kernel config are introduced hence any user needs to be updated. Downstream ipq40xx patch require rework to correctly move them to the qcom specific PHY directory. All affected patch automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: fixes for Ethernet on MT7988 SoCDaniel Golle2024-02-01
| | | | | | | | * fix switch ports with modes other than 1000M/Full * set 32-bit dma_coherent_mask to get PPE to work with 4 GiB of RAM * sync driver for built-in 1GE PHY with MediaTek SDK sources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.1: backport patch adding more speed modes to LED netdev triggerChristian Marangi2024-01-27
| | | | | | | Backport upstream patch adding more speed modes to LED netdev trigger. Fixes: 2c39269b6e00 ("generic: 6.1: backport qca808x LED support patch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport qca808x LED support patchChristian Marangi2024-01-27
| | | | | | | Backport qca808x LED support patch merged upstream needed to drop handling of it from the SSDK for ipq807x target. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: backport upstream Aquantia PHY firmware loader patchesChristian Marangi2024-01-26
| | | | | | | | | | | | | | Backport merged upstream patch that adds support for firmware loader from NVMEM or attached filesystem for Aquantia PHYs. Refresh all kernel patches affected by this change. Also update the path for aquantia .ko that got moved to dedicated directory upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [rmilecki: port to 5.15] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: 5.15: update Aquantia PHY driver to v6.1 codeRafał Miłecki2024-01-26
| | | | | | Backport few upstream changes included between v5.15 and v6.1. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: 5.15: backport v6.1 PHY changes required for AquantiaRafał Miłecki2024-01-26
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm27xx: update 6.1 patches to latest versionMarty Jones2024-01-25
| | | | | | | | | | | | | | | | Add support for BCM2712 (Raspberry Pi 5). https://github.com/raspberrypi/linux/commit/3bb5880ab3dd31f75c07c3c33bf29c5d469b28f3 Patches were generated from the diff between linux kernel branch linux-6.1.y and rpi-6.1.y from raspberry pi kernel source: - git format-patch linux-6.1.y...rpi-6.1.y Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> [Remove applied and reverted patches, squash patches and config commits] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: 6.1: add pending patch for ipq4019 MDIO MDC rate fixChristian Marangi2024-01-25
| | | | | | | | | | | | | | | | Add pending patch for ipq4019 MDIO MDC rate fix. The divisor was never actually set resulting in the MDC rate running at a very low speed. The same MDIO is used on ipq807x where Aquantia PHY are commonly used where MDIO is used to load the PHY firmware. Running at higher speed is required to make the firmware load faster as it does reduce load time from 60+ second to 5-6 seconds. Add as pending as upstream there seems to be some conflicts with quic and me and it might take lots of time before this is effectively merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: move stmmac backport fix patches to genericChristian Marangi2024-01-21
| | | | | | | | | | | | | Move stmmac backport fix patches from ipq806x to generic backport directory as they got merged upstream and they fix wide performance regression. This will eventually cause performance increase on any user of the stmmac driver. Generic patch automatically refreshed with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.73John Audia2024-01-19
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.73 Patch automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.72John Audia2024-01-19
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.72 Manually rebased: generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.147John Audia2024-01-17
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.147 Manually rebased: generic/backport-5.15/005-v5.17-01-Kbuild-use-Wdeclaration-after-statement.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: ksmbd: only v2 leases handle the directoryChen Minqiang2024-01-17
| | | | | | | | This backport a fix for ksmbd. Refer: https://github.com/namjaejeon/ksmbd/issues/469 Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* generic: 6.1: backport FIELD_PREP_CONST patchChristian Marangi2024-01-15
| | | | | | | | | | Backport FIELD_PREP_CONST patch needed for at803x backport patches to correctly compile and work. This MACRO is needed to treat values derived from FIELD_PREP usage as const to be used by switch case or other needed usage. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: initial backport of at803x PHY driver cleanupChristian Marangi2024-01-15
| | | | | | | | | | | Initial backport of at803x PHY driver cleanup. This is in preparation for split and addition of new PHY Family based on at803x needed for ipq807x and other IPQ Series SoC. Other affected patch are automatically refreshed with make target/linux/refresh Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: renumber MediaTek SGMII PCS patchChristian Marangi2024-01-15
| | | | | | | Renumber MediaTek SGMII PCS patch to make space for upcoming at803x backport patches. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: backport more NVMEM changes queued for v6.8Rafał Miłecki2024-01-08
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 6.1 to 6.1.71John Audia2024-01-06
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.71 Manually rebased: gemini/patches-6.1/0002-usb-fotg210-Collect-pieces-of-dual-mode-controller.patch All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.146John Audia2024-01-06
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.146 Removed upstreamed: generic/hack-5.15/940-ksmbd-have-a-dependency-on-cifs-arc4.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.146&id=ac385518598f50dd1b9b41bd05f50ce9795481d5 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
Powered by cgit, Themed by Ted Yin.