aboutsummaryrefslogtreecommitdiff
path: root/target/linux/generic
Commit message (Collapse)AuthorAge
...
* kernel: backport ethtool_putsRosen Penev2024-01-05
| | | | | | Will be used for conversions in the following commit. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: fix bridge proxyarp issue with some broken DHCP clientsFelix Fietkau2024-01-05
| | | | | | | | | | | There are broken devices in the wild that handle duplicate IP address detection by sending out ARP requests for the IP that they received from a DHCP server and refuse the address if they get a reply. When proxyarp is enabled, they would go into a loop of requesting an address and then NAKing it again. Fixes: https://github.com/openwrt/openwrt/issues/14309 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel/ksmbd: fix build for 5.15.145John Audia2024-01-04
| | | | | | | | | | | | | Include a patch[1] under review to fix the modpost error due to upstream changes: ... ERROR: modpost: "cifs_arc4_crypt" [fs/ksmbd/ksmbd.ko] undefined! ERROR: modpost: "cifs_arc4_setkey" [fs/ksmbd/ksmbd.ko] undefined! scripts/Makefile.modpost:133: recipe for target 'modules-only.symvers' failed 1. https://lore.kernel.org/all/20231227102605.4766-2-linkinjeon@kernel.org/ Signed-off-by: John Audia <therealgraysky@proton.me>
* rockchip: configure eth pad driver strength for orangepi r1 plus ltsTianling Shen2024-01-04
| | | | | | | | | | | The default strength is not enough to provide stable connection under 3.3v LDO voltage. Fixes: 32d5921b8b55 ("rockchip: add Orange Pi R1 Plus LTS support") Fixes: #13117 Fixes: #13759 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: bump 6.1 to 6.1.70John Audia2024-01-02
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.70 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.69John Audia2023-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69 Removed upstreamed: generic/backport-6.1/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1] generic/backport-6.1/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2] generic/backport-6.1/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3] generic/backport-6.1/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4] generic/backport-6.1/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=893597cbabfbc00ee51fd5f73e2028994f49ded6 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=1d82735f4bae954d5ba004994b96baec791f874f 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=4c2ad8e39c62c5288ca31ebf5c30e34f3bd9d044 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=325556d46bfd13a2fa0d304d0625be86821fd683 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=cac1218b32d7b56832dd36f7baf82f123f305a2a Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.144John Audia2023-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.144 Removed upstreamed: generic/backport-5.15/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1] generic/backport-5.15/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2] generic/backport-5.15/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3] generic/backport-5.15/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4] generic/backport-5.15/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=ca75274b17b890e6f6d2951e364360e25f2846e9 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=07ba21627ebbb2c68c357e8d698166c45078d014 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=aa3cc80e8edaa6098b58eb4a613d765496c2dfca 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=4c117984824b4a852a0e0765e5bdea0f1c7d6309 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=404ce6ee69d384096663e3f6987d915090447835 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.143John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.143 Removed upstreamed: generic/backport-5.15/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-5.15/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.143&id=00beca907a7be61da935bb687f9601420fc5f8a8 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.68John Audia2023-12-19
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68 Removed upstreamed: generic/backport-6.1/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1] Manually rebased: mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.68&id=3759e735562a31e44fee825498f05c06e64b25a8 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: backport NVMEM changes queued for v6.8Rafał Miłecki2023-12-18
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport upstream brcm_nvram fix for NAND controllerRafał Miłecki2023-12-18
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: 6.1: fix list_count_nodes backport patchChristian Marangi2023-12-15
| | | | | | | | | | Commit 25746a3fa2da ("drm/i915: fix up merge with usb-next branch") was internally applied to the 5.15 patch but wasn0t applied to the backport for kernel 6.1. Apply the same treatement also there to fix compilation warning. Fixes: a14240d384af ("kernel: backport list_count_nodes()") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: backport list_count_nodes()Rafał Miłecki2023-12-15
| | | | | | | It's needed by various stuff we backport. That includes NVMEM changes queued for v6.8. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* imx: imx7d-pico-pi: add CPU supply nodes to device treeLech Perczak2023-12-12
| | | | | | | Attach sw1a as "cpu-supply" to both CPUs in order to cpufreq driver to prove successfully. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: backport upstream nvmem fix for "fixed-layout"Rafał Miłecki2023-12-12
| | | | | | It replaces a pretty much identical downstream patch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: hack: support inverted LEDs on MaxLinear GPY211 PHYDaniel Golle2023-12-10
| | | | | | | | Add downstream DT property to setup the PHY LEDs of the MaxLinear GPY211 PHY in such way that the VDD of the LED is driven by the SoC pin rather than the GND (which is the default). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.1: fix patch 814 Add Qualcomm secure QFPROM supportAndrey VOLKOV2023-12-09
| | | | | | | | | | | | | The backported patch is broken, since kernel 6.1 has not 'include/linux/firmware' directory yet. Fix the include to the correct path. Fixes: #14115 Fixes: 52c365f055f6 ("kernel: backport v6.6 nvmem changes") Signed-off-by: Andrey VOLKOV <andrey@volkov.fr> [ improve commit description and title ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: remove mac-address-ascii dts supportRosen Penev2023-12-09
| | | | | | | Deprecated and replaced treewide with mac-base. Remove to avoid modern usage. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: of: remove mac-address-increment support hackRosen Penev2023-12-09
| | | | | | | | The MAC address increment has been replaced by the new "mac-base" NVMEM fixed layout. This old implementation can be removed now. Signed-off-by: Shiji Yang <yangshiji66@qq.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: remove already backported patch, fix buildFelix Fietkau2023-12-08
| | | | | Fixes: 6407ef8d2bcb ("kernel: backport upstream mediatek WED changes") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport upstream mediatek WED changesFelix Fietkau2023-12-08
| | | | | | Reorder and update existing patches Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: add tmon packageFlorian Eckert2023-12-05
| | | | | | | | | | | | | | Add the 'tmon' packages. This is as a tool to help visualize, tune, and test the complex thermal subsystem. We get a compile warning for the tool that the printf format does not fit. This commit contains a patch that fixes this warning. This patch has also been sent upstream to the Linux kernel [1]. Links: [1] https://lore.kernel.org/all/20231204141335.2798194-1-fe@dev.tdt.de/ Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel: bump 6.1 to 6.1.65John Audia2023-12-04
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.65 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.141John Audia2023-12-04
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.141 All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: backport fixes for realtek r8152Marty Jones2023-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes issues with RTL8156 2.5G USB adapters - # ethtool eth1 Settings for eth1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 2500Mb/s Duplex: Half Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Current message level: 0x00000007 (7) drv probe link Link detected: yes - # - r8152: break the loop when the budget is exhausted - r8152: Block future register access if register access fails - r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE - r8152: add vendor/device ID pair for D-Link DUB-E250 - r8152: try to use a normal budget - r8152: set bp in bulk - r8152: adjust generic_ocp_write function - r8152: fix the autosuspend doesn't work - r8152: Add __GFP_NOWARN to big allocations - r8152: reduce the control transfer of rtl8152_get_version() - r8152: remove rtl_vendor_mode function - r8152: avoid to change cfg for all devices - r8152: add USB device driver for config selection - r8152: use napi_gro_frags - cdc_ether: no need to blacklist any r8152 devices - cdc_ether: add u-blox 0x1313 composition Build system: x86_64 Build-tested: bcm2711, rockchip, x86/64 Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64 Signed-off-by: Marty Jones <mj8263788@gmail.com>
* generic: add more DT LED color and function definitionsShiji Yang2023-12-02
| | | | | | | Openwrt supports hundreds of devices. These newly added LED colors and functions can help developers better describe LED indicators. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: bump 5.15 to 5.15.140John Audia2023-11-29
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.140 Removed upstreamed: mvebu/patches-5.15/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.140&id=06d320ca170b4e59bb261e2ce3ffe84e9154d42b Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.64John Audia2023-11-29
| | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64 Removed upstreamed: ixp4xx/patches-6.1/0001-mtd-cfi_cmdset_0001-Byte-swap-OTP-info.patch[1] mvebu/patches-6.1/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[2] qualcommax/patches-6.1/0026-v6.7-clk-qcom-ipq8074-drop-the-CLK_SET_RATE_PARENT-flag-f.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=3b93096d29c5b9ca2af94be4ee9949c1767acf17 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=b3fd9db79e30d5eb5f76ef1f5b7e4f444af574ea 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=877080a3490102da26b8d969588159b2385f739e Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport upstream Aquantia PHY firmware loader patchesChristian Marangi2023-11-24
| | | | | | | | | | | | Backport merged upstream patch that adds support for firmware loader from NVMEM or attached filesystem for Aquantia PHYs. Refresh all kernel patches affected by this change. Also update the path for aquantia .ko that got moved to dedicated directory upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 5.15 to 5.15.139John Audia2023-11-23
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.139 Removed upstreamed: backport-5.15/830-v6.6-2-leds-turris-omnia-Drop-unnecessary-mutex-locking.patch[1] backport-5.15/830-v6.7-1-leds-turris-omnia-Do-not-use-SMBUS-calls.patch[2] x86/patches-5.15/120-hwrng-geode-fix-accessing-registers.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.139&id=aec3706971b332af8321b2beccba981b8061489a 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.139&id=893eedf596dd81c7a7f0cd80b345956ae000eab9 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.139&id=a5c83c8043d70b9a28d1bd78a2dbbab340f43889 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.63John Audia2023-11-23
| | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.63 Removed upstreamed: generic/backport-6.1/815-v6.6-2-leds-turris-omnia-Drop-unnecessary-mutex-locking.patch generic/backport-6.1/815-v6.7-1-leds-turris-omnia-Do-not-use-SMBUS-calls.patch ixp4xx/patches-6.1/0007-watchdog-ixp4xx-Make-sure-restart-always-works.patch Manually rebased: bcm27xx/patches-6.1/950-0606-hwrng-bcm2835-sleep-more-intelligently.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=7d0e60e4ff840e97fb18afb2a7344442c10a6fdf 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=63cdeb20ee3bfef820b045b8d3b8395f9f815a74 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=8803da01fe1b4ca3d37745283f7e73c6c2558c0c Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: drop "mac-address-increment-byte" DT property supportRafał Miłecki2023-11-21
| | | | | | This downstream DT property is not used by any DTS file anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: 6.1: Add missing config option DEVTMPFS_SAFEMarius Dinu2023-11-19
| | | | | | Fixes build error when enabling CONFIG_KERNEL_DEVTMPFS in OpenWrt menuconfig. Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
* kernel: bump 6.1 to 6.1.62John Audia2023-11-10
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.62 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.138John Audia2023-11-10
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.138 Removed upstreamed: generic/backport-5.15/819-v6.6-0018-nvmem-imx-correct-nregs-for-i.MX6SLL.patch[1] generic/backport-5.15/819-v6.6-0019-nvmem-imx-correct-nregs-for-i.MX6UL.patch[2] generic/backport-5.15/819-v6.6-0020-nvmem-imx-correct-nregs-for-i.MX6ULL.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.138&id=6e22bf6f00d593b0a7e0b2f418fde89317424671 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.138&id=6efd498009b987a92f57f3bdae476f0503364fb7 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.138&id=6e22bf6f00d593b0a7e0b2f418fde89317424671 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: support reading hex MAC address from NVMEMDaniel Golle2023-11-03
| | | | | | | In addition to binary and ASCII-formatted MAC addresses, add support for processing hexadecimal encoded MAC addresses from NVMEM. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add support MeigLink SLM828 modemDaniel Golle2023-11-03
| | | | | | | | | | | | | | | | | Another Qualcomm-based USB-connected modem, offering endpoints 0 : rndis_host (link to voip subsystem listening on 169.254.5.100) 1 : rndis_host (?) 2 : option (?) 3 : option (at) 4 : option (at) 5 : option (?) 6 : GobiNet (qmi) 7 : ? Add support for this modem in rndis_host, option and qmi_wwan driver which allows the modem to be used with ModemManager. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 6.1 to 6.1.61John Audia2023-11-03
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.61 Removed upstreamed: generic/backport-6.1/814-v6.6-0018-nvmem-imx-correct-nregs-for-i.MX6SLL.patch[1] generic/backport-6.1/814-v6.6-0019-nvmem-imx-correct-nregs-for-i.MX6UL.patch[2] generic/backport-6.1/814-v6.6-0020-nvmem-imx-correct-nregs-for-i.MX6ULL.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.61&id=b90b8633ef62314f3a5f5675106e6dcdec981b6f 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.61&id=37495846b1efc23c1767b17ddd6645cc0ccb9946 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.61&id=116671d25915b913374ccdb2956b5fdaff939dc9 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: fix mtd/NVMEM regression affecting U-Boot env NVMEM driverRafał Miłecki2023-10-31
| | | | | | Fixes: b5956700702b ("kernel: backport nvmem v6.6 fixes and v6.7 changes") Fixes: https://github.com/openwrt/openwrt/issues/13831 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add seil-fw mtdsplit driver for IIJ SEIL devicesINAGAKI Hiroshi2023-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mtdsplit parser driver parses firmware partition on Internet Initiative Japan Inc. (IIJ) SEIL series devices. Structure of header: 0x0 - 0x7 : Identifier (hex) 0x8 - 0x57: Copyright (ascii) 0x58 - 0x5b: Data CRC (hex) 0x5c - 0x5f: Image Format Version (hex) 0x60 - 0x63: Image Major Version (hex) 0x64 - 0x67: Image Minor Version (hex) 0x68 - 0x87: Image Release Version (ascii) 0x88 - 0x8b: Xor value for Data? (hex) 0x8c - 0x8f: Data Length (hex) Properties: - compatible : "iij,seil-firmware" - iij,seil-id : ID of SEIL firmware for the device (8 bytes) - examples: - SA-W2 : <0x5345494c 0x32303135> ("SEIL2015") - SEIL/X1 : <0x5345494c 0x2F582020> ("SEIL/X ") - iij,bootdev-name: boot device name assigned to the partition (optional) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: fix compile issues with tools/ on macOSFelix Fietkau2023-10-29
| | | | | | | Reduce dependencies on linux specific header files. Avoid using __weak for function declarations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix jffs2 compilation with GCC_PLUGIN_RANDSTRUCT enabledMatt Merhar2023-10-28
| | | | | | | | | | | | | Designated initializers are required when using the randstruct GCC plugin, otherwise an error like the following is seen: ./include/linux/lzma.h:60:31: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] This was originally applied via 55643e469c21, but was unintentionally reverted in 483503603cb2. Fixes: 483503603cb2 ("generic: 5.15: rework pending patch") Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* kernel: backport nvmem v6.6 fixes and v6.7 changesRafał Miłecki2023-10-28
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.15 to 5.15.137John Audia2023-10-27
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.137 All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.60John Audia2023-10-26
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.60 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: Support Altima AMI101L PHYLinus Walleij2023-10-25
| | | | | | | | This is a backport of the patch to support the Altima AMI101L PHY which is merged for the v6.7 kernel. This PHY is used in the IXP4xx-based USRobotics USR8200. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* generic: RTC7301 byte-addressed IOLinus Walleij2023-10-25
| | | | | | | | This is a backport of the patch for byte addressed IO to the Epson RTC7301 driver. This is used by the IXP4xx-based USRobotics USR8200. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: 5.15: Backport Turris Omnia LED patchesMarek Behún2023-10-23
| | | | | | | | | | | | | | | | | | | | | This backports patches leds: turris-omnia: convert to use dev_groups leds: turris-omnia: Use sysfs_emit() instead of sprintf() leds: turris-omnia: Drop unnecessary mutex locking leds: turris-omnia: Do not use SMBUS calls leds: turris-omnia: Make set_brightness() more efficient leds: turris-omnia: Support HW controlled mode via private trigger leds: turris-omnia: Add support for enabling/disabling HW gamma correction leds: turris-omnia: Fix brightness setting and trigger activating into backport-5.15. The above patches replace: leds: turris-omnia: support HW controlled mode via private trigger leds: turris-omnia: initialize multi-intensity to full leds: turris-omnia: change max brightness from 255 to 1 from mvebu/patches-5.15. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: bump 6.1 to 6.1.59John Audia2023-10-21
| | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.59 Manually rebased: bcm27xx/patches-6.1/950-0124-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch Removed upstreamed: generic/backport-6.1/781-v6.6-02-net-dsa-qca8k-fix-potential-MDIO-bus-conflict-when-a.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.59&id=881050b25b1dda7b0f14d40d1b09bf38cb3b427c Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: 6.1: Backport Turris Omnia LED patchesMarek Mojík2023-10-20
| | | | | | | | | | | | | | | | | | | | This backports patches leds: turris-omnia: Use sysfs_emit() instead of sprintf() leds: turris-omnia: Drop unnecessary mutex locking leds: turris-omnia: Do not use SMBUS calls leds: turris-omnia: Make set_brightness() more efficient leds: turris-omnia: Support HW controlled mode via private trigger leds: turris-omnia: Add support for enabling/disabling HW gamma correction leds: turris-omnia: Fix brightness setting and trigger activating into backport-6.1. The above patches replace: leds: turris-omnia: support HW controlled mode via private trigger leds: turris-omnia: initialize multi-intensity to full leds: turris-omnia: change max brightness from 255 to 1 from mvebu/patches-6.1. Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Powered by cgit, Themed by Ted Yin.