aboutsummaryrefslogtreecommitdiff
path: root/target/linux/generic/backport-6.1
Commit message (Collapse)AuthorAge
* kernel: backport upstream GRO fixesFelix Fietkau2024-05-03
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 6.1 to 6.1.89Shiji Yang2024-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelogs: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.67 https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68 https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69 Upstreamed patches: target/linux/generic/backport-6.1/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch [1] target/linux/generic/backport-6.1/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch [2] target/linux/generic/backport-6.1/790-48-STABLE-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch [3] target/linux/generic/backport-6.1/790-50-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch [4] target/linux/generic/backport-6.1/790-16-v6.4-net-dsa-mt7530-set-all-CPU-ports-in-MT7531_CPU_PMAP.patch [5] target/linux/generic/backport-6.1/790-46-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch [6] target/linux/generic/backport-6.1/790-47-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch [7] target/linux/mediatek/patches-6.1/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch [8] target/linux/mediatek/patches-6.1/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch [9] target/linux/mediatek/patches-6.1/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch [10] target/linux/mediatek/patches-6.1/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch [11] Symbol changes: MITIGATION_SPECTRE_BHI (new) [12] SPECTRE_BHI_{ON,OFF} (deprecated) [12] References: [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=8bf7c76a2a207ca2b4cfda0a279192adf27678d7 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=f1c3c61701a0b12f4906152c1626a5de580ea3d2 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=19643bf8c9b5bb5eea5163bf2f6a3eee6fb5b99b [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=e86c9db58eba290e858e2bb80efcde9e3973a5ef [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=013c787d231188a6408e2991150d3c9bf9a2aa0b [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=41a004ffba9b1fd8a5a7128ebd0dfa3ed39c3316 [7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=7d51db455ca03e5270cc585a75a674abd063fa6c [8] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=082b831488a41257b7ac7ffa1d80a0b60d98394d [9] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=6f5f72a684a2823f21efbfd20c7e4b528c44a781 [10] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=a4fe8813a7868ba5867e42e60de7a2b8baac30ff [11] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=c1d87d56af063c87961511ee25f6b07a5676d27d [12] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=d844df110084ef8bd950a52194865f3f63b561ca Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* generic: v6.1, v6.6: add patch to fix PHY-muxing on MT7530Daniel Golle2024-04-27
| | | | | | | | Move accepted patches to backport folder, re-add previously removed patch which caused havoc on MT7621 and add the (still pending) fix. Fixes: d40691a5fb ("generic: 6.1, 6.6: mt7530: import pending patches") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: generic backport 6.1: rename mistyped .patch fileAntonio Flores2024-04-27
| | | | | | | Rename mistyped file .patc to patch Fixes: ac8bfe316b ("generic: 6.1, 6.6: mt7530: import accepted patches") Signed-off-by: Antonio Flores <antflores627@gmail.com>
* kernel: move mv88e6xxx fix to generic backportsStijn Tintel2024-04-26
| | | | | | | | | | | | | | | | The backports introduced in commit d40756563c46 ("kernel: backport phylink changes from mainline Linux") broke the mv88e6xxx DSA driver. A backport to fix this was added to the kirkwood target, but as it is used in multiple targets, and there's a kmod package for it, the fix should be in generic backports. This fixes the switch on the WatchGuard Firebox M300 when running the 6.1 testing kernel. There is no need to backport the fix for the 6.6 kernel, as it was included in 6.6.5. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport flow offload pppoe fixFelix Fietkau2024-04-26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: 6.1, 6.6: mt7530: import accepted patchesDaniel Golle2024-04-24
| | | | | | | | | | | | | Import patches for the MT7530 DSA driver from net-next tree: cae425cb43fe net: dsa: allow DSA switch drivers to provide their own phylink mac ops dd0c9855b413 net: dsa: introduce dsa_phylink_to_port() 7c5e37d7ee78 net: dsa: mt7530: simplify core operations 868ff5f4944a net: dsa: mt7530-mdio: read PHY address of switch from device tree 2c606d138518 net: dsa: mt7530: fix port mirroring for MT7988 SoC switch d59cf049c837 net: dsa: mt7530: fix mirroring frames received on local port 62d6d91db98a net: dsa: mt7530: provide own phylink MAC operations Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: mt7530: move accepted patches to backport-6.{1,6}Daniel Golle2024-04-24
| | | | | | | Move two accepted patches for the MT7530 DSA driver from pending-6.{1,6} to backport-6.{1,6}. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport ipeth CDC NCM supportGeorgi Valkov2024-04-21
| | | | | | | | | | | | | | | Fixes no communication with tethered iOS devices in CDC NCM mode. Freshly booted iOS devices start in legacy mode, but are put into NCM mode by the official Apple driver. [1] https://github.com/torvalds/linux/commit/a2d274c62e44b1995c170595db3865c6fe701226 Fixes: #12566 Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: Georgi Valkov <gvalkov@gmail.com> [ better reference fixed issue ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport support for generic spi-nor from SFDP dataChristian Marangi2024-04-21
| | | | | | | | | | | | | Backport patches for support of generic spi-nor from SFDP data for kernel 6.1. Kernel 5.15 have major rework of the info flags and it's not trustable to backport this amount of changes and expect correct function of it. All affected patches automatically refreshed using make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.86Hauke Mehrtens2024-04-14
| | | | | | | | | | | Removed upstreamed: bcm27xx/patches-6.1/950-1235-drm-vc4-don-t-check-if-plane-state-fb-state-fb.patch [1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.86&id=48bfb4b03c5ff6e1fa1dc73fb915e150b0968c40 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 6.1 to 6.1.84Hauke Mehrtens2024-04-14
| | | | | | | | | | | Removed upstreamed: pistachio/patches-6.1/110-pwm-img-fix-clock-lookup.patch [1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.84&id=44b6fb6cdedb2c391a2da355521d4610b2645fcc Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 6.1 to 6.1.83Hauke Mehrtens2024-04-14
| | | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-6.1/789-STABLE-01-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch [1] generic/backport-6.1/789-STABLE-02-net-dsa-mt7530-fix-link-local-frames-that-ingress-vl.patch [2] generic/backport-6.1/789-STABLE-03-net-dsa-mt7530-fix-handling-of-all-link-local-frames.patch [3] generic/pending-6.1/735-net-mediatek-mtk_eth_soc-release-MAC_MCR_FORCE_LINK-.patch [4] generic/pending-6.1/736-net-ethernet-mtk_eth_soc-fix-PPE-hanging-issue.patch [5] Manual adjusted the following patches: mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=be4512b9ac6fc53e1ca8daccbda84f643215c547 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f1fa919ea59655f73cb3972264e157b8831ba546 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=86c0c154a759f2af9612a04bdf29110f02dce956 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=6b62bad2da1b338f452a9380639fc9b093d75a25 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.83&id=f78807362828ad01db2a9ed005bf79501b620f27 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic: 6.1: sync mt7530 DSA driver with upstreamDaniel Golle2024-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport lots upstream changes, many of them fixes, for the mt7530 DSA driver. Some of them may or may not find they way into Linux 6.1 stable, some certainly won't because they are fixes for backported commits which aren't even present in Linux 6.1 upstream. Apart from adding new patches, also remove mutated patch 723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch which should never have been added for Linux 6.1 -- it was applied already upstream but coincidentally would fuzzy-apply in the wrong place as well (for MT7530 instead of MT7531). While that didn't really hurt anyone it is just unneeded. The other deleted patch 795-mt7530-register-OF-node-for-internal-MDIO-bus.patch has been replaced by an equivalent commit with a more complete patch description by upstream maintainer Arınç Ünal. The remaining differences compared to the upstream driver are: * C22/C45 MDIO ops aren't split Upstream did that, backporting it would require making changes to *all* DSA drivers * 'slave' -> 'user', 'master' -> 'conduit' language change in DSA * support for selecting preferred CPU port on MT7531 Also this would require too many DSA framework changes potentially affecting other devices. If we ever really use Linux 6.1 in a release (I hope not) we can still reconsider to make the effort to backport that. In addition to some minor bug fixes and style improvements the switch should now behave more conformant when it comes to link-local frames, and we will again be able to cleanly pick patches from upstream. MAINTAIERS NOTE: Three patches are already part of Linux stable and should be removed with the next minor kernel version bump: 789-STABLE-01-net-dsa-mt7530-prevent-possible-incorrect-XTAL-frequ.patch 789-STABLE-02-net-dsa-mt7530-fix-link-local-frames-that-ingress-vl.patch 789-STABLE-03-net-dsa-mt7530-fix-handling-of-all-link-local-frames.patch Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport at803x kernel panic fixChristian Marangi2024-04-07
| | | | | | Backport at803x kernel panic fix merged upstream for kernel 6.1 and 6.6. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: refresh backport patchesMieczyslaw Nalewaj2024-04-01
| | | | | | | Refresh backport patches for kernel 6.1.82 with make target/linux/refresh. Fixes: 06cdc07f8cc7 ("ath79: add support for Huawei AP5030DN") Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
* ath79: add support for Huawei AP5030DNMarco von Rosenberg2024-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Huawei AP5030DN is a dual-band, dual-radio 802.11ac Wave 1 3x3 MIMO enterprise access point with two Gigabit Ethernet ports and PoE support. Hardware highlights: - CPU: QCA9550 SoC at 720MHz - RAM: 256MB DDR2 - Flash: 32MB SPI-NOR - Wi-Fi 2.4GHz: QCA9550-internal radio - Wi-Fi 5GHz: QCA9880 PCIe WLAN SoC - Ethernet 1: 10/100/1000 Mbps Ethernet through Broadcom B50612E PHY - Ethernet 2: 10/100/1000 Mbps Ethernet through Marvell 88E1510 PHY - PoE: input through Ethernet 1 port - Standalone 12V/2A power input - Serial console externally available through RJ45 port - External watchdog: SGM706 (1.6s timeout) Serial console: 9600n8 (9600 baud, no stop bits, no parity, 8 data bits) MAC addresses: Each device has 32 consecutive MAC addresses allocated by the vendor, which don't overlap between devices. This was confirmed with multiple devices with consecutive serial numbers. The MAC address range starts with the address on the label. To be able to distinguish between the interfaces, the following MAC address scheme is used: - eth0 = label MAC - eth1 = label MAC + 1 - radio0 (Wi-Fi 5GHz) = label MAC + 2 - radio1 (Wi-Fi 2.4GHz) = label MAC + 3 Installation: 0. Connect some sort of RJ45-to-USB adapter to "Console" port of the AP 1. Power up the AP 2. At prompt "Press f or F to stop Auto-Boot in 3 seconds", do what they say. Log in with default admin password "admin@huawei.com". 3. Boot the OpenWrt initramfs from TFTP using the hidden script "run ramboot". Replace IP address as needed: > setenv serverip 192.168.1.10 > setenv ipaddr 192.168.1.1 > setenv rambootfile openwrt-ath79-generic-huawei_ap5030dn-initramfs-kernel.bin > saveenv > run ramboot 4. Optional but recommended as the factory firmware cannot be downloaded publicly: Back up contents of "firmware" partition using the web interface or ssh: $ ssh root@192.168.1.1 cat /dev/mtd11 > huawei_ap5030dn_fw_backup.bin 5. Run sysupgrade using sysupgrade image. OpenWrt shall boot from flash afterwards. Return to factory firmware (using firmware upgrade package downloaded from non-public Huawei website): 1. Start a TFTP server in the directory where the firmware upgrade package is located 2. Boot to u-boot as described above 3. Install firmware upgrade package and format the config partitions: > update system FatAP5X30XN_SOMEVERSION.bin > format_fs Return to factory firmware (from previously created backup): 1. Copy over the firmware partition backup to /tmp, for example using scp 2. Use sysupgrade with force to restore the backup: sysupgrade -F huawei_ap5030dn_fw_backup.bin 3. Boot AP to U-Boot as described above Quirks and known issues ----------------------- - On initial power-up, the Huawei-modified bootloader suspends both ethernet PHYs (it sets the "Power Down" bit in the MII control register). Unfortunately, at the time of the initial port, the kernel driver for the B50612E/BCM54612E PHY behind eth0 doesn't have a resume callback defined which would clear this bit. This makes the PHY unusable since it remains suspended forever. This is why the backported kernel patches in this commit are required which add this callback and for completeness also a suspend callback. - The stock firmware has a semi dual boot concept where the primary kernel uses a squashfs as root partition and the secondary kernel uses an initramfs. This dual boot concept is circumvented on purpose to gain more flash space and since the stock firmware's flash layout isn't compatible with mtdsplit. - The external watchdog's timeout of 1.6s is very hard to satisfy during bootup. This is why the GPIO15 pin connected to the watchdog input is configured directly in the LZMA loader to output the CPU_CLK/4 signal which keeps the watchdog happy until the wdt-gpio kernel driver takes over. Because it would also take too long to read the whole kernel image from flash, the uImage header only includes the loader which then reads the kernel image from flash after GPIO15 is configured. Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de> [fixed 6.6 backport patch naming] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: backport brcmnand support for "brcm,wp-not-connected"Rafał Miłecki2024-03-28
| | | | | | | It's required to support NAND controllers with WP pin on boards that don't have it connected to NAND chip. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: 6.1: backport AXP PMIC supportChukun Pan2024-03-26
| | | | | | | | | Backport AXP15060, AXP313a and AXP192 support. The AXP15060 PMIC is used for starfive boards, and the AXP313a PMIC is used for sunxi boards. Remove conflicting patches from starfive target. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: backport some useful LED_FUNCTION_* defines for DTRafał Miłecki2024-03-17
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: 6.1: backport support for various MHI 5G modemsDaniel Golle2024-03-15
| | | | | | | | | | | | | | * Dell DW5932e * Foxconn T99W175 (HP variant) * Foxconn T99W510 * Generic SDX75-based * Quectel EM160R-GL (newer variants) * Quectel RM520 * Quectel RM520N-GL (Lenovo variant) * SC8280XP Compute Reference Design * Telit FE990 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 6.1 to 6.1.81John Audia2024-03-11
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.81 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.80John Audia2024-03-05
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.80 Manually rebased: generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch[1] All other patches automatically rebased. 1. Acknowledgement to @heheb and @DragonBluep. Upstream commit for ref: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.80&id=9c5662e95a8dcc232c3ef4deb21033badcd260f6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.79John Audia2024-02-24
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.79 Manually rebased: ath79/patches-6.1/900-unaligned_access_hacks.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, flogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: replace simple AQR hack patch with upstream versionChristian Marangi2024-02-21
| | | | | | | | | Simple AQR hack patch has been merged upstream, hence we can drop it from hack directory and move it to backport. The patch for 5.15 are correctly reworked to align to outdated API. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.78John Audia2024-02-18
| | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.78 Manually rebased: bcm27xx/patches-6.1/950-0865-usb-dwc3-Set-DMA-and-coherent-masks-early.patch bcm27xx/patches-6.1/950-0124-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64/AMD Cezanne, ramips/tplink_archer-a6-v3, logic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: backport phylink changes from mainline LinuxDaniel Golle2024-02-15
| | | | | | | Let's pick a bunch of useful phylink changes which allow us to keep drivers in sync with mainline Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: 6.1: backport UBI device model improvementsDaniel Golle2024-02-15
| | | | | | | | Backport two commits from Linux 6.3 wiring up device node parents of ubi devices (pointing to their MTD parent) as well as ubiblock devices (poiting to their parent UBI volume). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.1: use upstreamed QCA807x fixupRobert Marko2024-02-15
| | | | | | | Now that QCA807x interface mode check was upstreamed, use the upstreamed version and mark it as such. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 6.1: backport QCA807x PHY patchesChristian Marangi2024-02-11
| | | | | | | | | | | | Backport QCA807x PHY patches merged upstream that introduce the new concept of PHY package. Also add in generic config the new Kconfig CONFIG_QCA807X_PHY. All affected patch automatically refreshed with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: move LEDs netdev trigger patch from pending to backportChristian Marangi2024-02-11
| | | | | | | Move LEDs netdev trigger patch from pending to backport as it has been merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport Aquantia PHY endianess patchChristian Marangi2024-02-11
| | | | | | | | | Backport Aquantia PHY endianess patch. While the current implementation works ok for Little-Endian targets, backport patch to prevent any kind of malfunction if in the future we will have Big-Endian target with Aquantia PHYs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.77John Audia2024-02-08
| | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.77 Removed upstreamed: generic/backport-6.1/707-v6.8-01-net-phy-at803x-fix-passing-the-wrong-reference-for-c.patch[1] generic/backport-6.1/796-v6.8-ipmr-fix-kernel-panic-when-forwarding-mcast-packets.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.77&id=7dc0fefd37dd5fb03fdac6e3e01b1c2291148ccb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.77&id=d2f1b7fe74afd66298dbb3c7b39e7b62e4df1724 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.76John Audia2024-02-08
| | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.76 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport patch fixing kernel panic with mcast packetsChristian Marangi2024-02-05
| | | | | | | | | Backport patch fixing kernel panic with mcast packets, patch is already scheduled to be backported to stable kernels and will be dropped once new stable kernel version are released. Fixes: #14554 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch to enable PHYLIB_LEDS kconfig dynamicallyChristian Marangi2024-02-05
| | | | | | | | | | Backport patch to enable PHYLIB_LEDS kconfig dynamically instead of having to select this config for every target that makes use of PHY LEDs API. All affected patch are automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add patch fixing bugs with LED netdev triggerChristian Marangi2024-02-04
| | | | | | | | | Backport one patch merged upstream that prevent a deadlock for LED netdev trigger and add a pending patch that fix kernel panic on interface rename trigger notification with invalid dev. Fixes: #14477 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: replace ipq40xx MDIO patch with upstream versionChristian Marangi2024-02-03
| | | | | | | Replace ipq40xx MDIO patch with upstream version now that the driver part got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport LED fixes for qca808x PHYChristian Marangi2024-02-03
| | | | | | Backport LED fixes for qca808x PHY to restore correct functionality. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.75John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.75 Removed upstreamed: generic/hack-6.1/321-powerpc_crtsavres_prereq.patch[1] generic/pending-6.1/540-ksmbd-only-v2-leases-handle-the-directory.patch[2] Rebased: bcm27xx/patches-6.1/950-0670-fbdev-Don-t-cancel-deferred-work-if-pagelist-empty.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=16b88e68b85d5520c28498bb847358ff6300cb90 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/fs/smb?h=v6.1.75&id=c866866c795296d3637ab0d48a3d8a3ef5d6f4a3 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=81f444f22816a82ada2cc787a2845cffc8c584a6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport PHY package MMD patchChristian Marangi2024-02-01
| | | | | | | | | | Backport PHY package MMD patch merged upstream that add support for writing MMD regs for the PHY package and support for writing to PHY package at an offset. All affected patches automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport at803x split patchesChristian Marangi2024-02-01
| | | | | | | | | | | | | | Backport at803x split patches merged upstream to tidy things up for the at803x PHY driver. New Kernel config are introduced hence any user needs to be updated. Downstream ipq40xx patch require rework to correctly move them to the qcom specific PHY directory. All affected patch automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch adding more speed modes to LED netdev triggerChristian Marangi2024-01-27
| | | | | | | Backport upstream patch adding more speed modes to LED netdev trigger. Fixes: 2c39269b6e00 ("generic: 6.1: backport qca808x LED support patch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport qca808x LED support patchChristian Marangi2024-01-27
| | | | | | | Backport qca808x LED support patch merged upstream needed to drop handling of it from the SSDK for ipq807x target. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: move stmmac backport fix patches to genericChristian Marangi2024-01-21
| | | | | | | | | | | | | Move stmmac backport fix patches from ipq806x to generic backport directory as they got merged upstream and they fix wide performance regression. This will eventually cause performance increase on any user of the stmmac driver. Generic patch automatically refreshed with make target/linux/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 6.1 to 6.1.72John Audia2024-01-19
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.72 Manually rebased: generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport FIELD_PREP_CONST patchChristian Marangi2024-01-15
| | | | | | | | | | Backport FIELD_PREP_CONST patch needed for at803x backport patches to correctly compile and work. This MACRO is needed to treat values derived from FIELD_PREP usage as const to be used by switch case or other needed usage. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: initial backport of at803x PHY driver cleanupChristian Marangi2024-01-15
| | | | | | | | | | | Initial backport of at803x PHY driver cleanup. This is in preparation for split and addition of new PHY Family based on at803x needed for ipq807x and other IPQ Series SoC. Other affected patch are automatically refreshed with make target/linux/refresh Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: renumber MediaTek SGMII PCS patchChristian Marangi2024-01-15
| | | | | | | Renumber MediaTek SGMII PCS patch to make space for upcoming at803x backport patches. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: backport more NVMEM changes queued for v6.8Rafał Miłecki2024-01-08
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Powered by cgit, Themed by Ted Yin.