aboutsummaryrefslogtreecommitdiff
path: root/target/linux/brcm2708
Commit message (Collapse)AuthorAge
...
* brcm2708: backport upstream ARM dts commitsRafał Miłecki2017-03-24
| | | | | | | | | | | | This gets us in sync with dts from kernel 4.11. Two patches were already backported earlier. I decided to use 03x prefix as it's kind of similar to the 3xx prefix: 3xx - architecture specific patches It isn't any documented or strict rule though. We don't need to stick to it if we hit any problems. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: rename all patches from raspberrypi git tree to use 950 prefixRafał Miłecki2017-03-24
| | | | | | | | | | | | | | | | | | Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm2708: add kmod-drm-vc4 packageRafał Miłecki2017-03-21
| | | | | | It includes vc4 driver for Broadcom VideoCore IV GPU. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm2708: detect Raspberry Pi Zero WStijn Tintel2017-03-08
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm2708: order boards and models alphabeticallyStijn Tintel2017-03-08
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm2708: add support for the new Raspberry Pi Zero WÁlvaro Fernández Rojas2017-03-04
| | | | | | Support is experimental since I haven't got any device to test. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update linux 4.9 patches to latest versionÁlvaro Fernández Rojas2017-03-04
| | | | | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.9.y - Remove led1 from diag.sh for RPi3 since it causes boot issues. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* build: get rid of host.mkFelix Fietkau2017-02-26
| | | | | | Defined required host related variables in toplevel.mk instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.9 to version 4.9.10Hauke Mehrtens2017-02-16
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm2708: bcm2708: fix buildÁlvaro Fernández Rojas2017-02-08
| | | | | | | buildbot fails to build without regmap, which I couldn't reproduce locally. Hopefully this fixes it. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: add more patches for linux 4.9Álvaro Fernández Rojas2017-02-08
| | | | | | Also removes unneeded wireless patches Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: bcm2710: add 64 bit support for Raspberry Pi 3Álvaro Fernández Rojas2017-02-08
| | | | | | | 64 bit support for Raspberry Pi 3 is experimental. However, bcm2709 subtarget should serve as a stable and compatible 32 bit support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: bcm2709: add support for Raspberry Pi 3Álvaro Fernández Rojas2017-02-08
| | | | | | | This adds support for Raspberry Pi 3 on the bcm2709 subtarget, in order to keep 32 bit image support when 64 bit support is added on bcm2710 subtarget. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: remove duplicated gzip from image generationÁlvaro Fernández Rojas2017-02-07
| | | | | | Images are now automatically gziped so remove custom image command Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: remove linux 4.4 supportÁlvaro Fernández Rojas2017-02-07
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: switch to linux 4.9Álvaro Fernández Rojas2017-02-07
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: add linux 4.9 supportÁlvaro Fernández Rojas2017-02-07
| | | | | | | Patches from Raspberry Pi repo: https://github.com/raspberrypi/linux/commits/rpi-4.9.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2017-02-06
| | | | | | | | n As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Kernel: bump to 4.4.44Stijn Segers2017-01-27
| | | | | | | | Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64. .44 has been run-tested on the 17.01 branch here on ar71xx and mt7621. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* kernel: update 4.4 kernel to 4.4.42Hauke Mehrtens2017-01-13
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove DEVTMPFS platform overridesFelix Fietkau2017-01-10
| | | | | | Those options are handled via top-level menuconfig instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump to 4.4.40Hauke Mehrtens2017-01-06
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm2708: unbreak the spidev buildJohn Crispin2016-12-20
| | | | | | a generic patch made this patch fail to apply cleanly leading to aborted builds Signed-off-by: John Crispin <john@phrozen.org>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2016-12-04
| | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.32Stijn Tintel2016-11-16
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 4.4 to version 4.4.28Paul Wassi2016-10-31
| | | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on ar71xx, brcm47xx, kirkwood. Signed-off-by: Paul Wassi <p.wassi@gmx.at> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: drop usbdev LED triggerRafał Miłecki2016-10-19
| | | | | | It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm2708: fix image generation with imagebuilderÁlvaro Fernández Rojas2016-10-13
| | | | | | | COPYING is not present in $(LINUX_DIR) on imagebuilder and prevents a successful image creation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.22Stijn Segers2016-09-30
| | | | | | Forgot to update kernel-version.mk, so updated patch. Compile-tested on x86/64 and ar71xx; run-tested on x86/64 and ar71xx. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* brcmfmac43430-firmware: remove package and switch to linux-firmwareÁlvaro Fernández Rojas2016-09-29
| | | | | | | Now that the firmware for BCM43430 has been submitted to linux-firmware use it and remove RPiDistro package. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcmfmac43430-firmware: rename to brcmfmac-firmware-43430-sdioÁlvaro Fernández Rojas2016-09-15
| | | | | | This is consistent with the rest of brcmfmac firmwares. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.20Álvaro Fernández Rojas2016-09-15
| | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on brcm2708 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2016-09-10
| | | | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Also adds support for Raspberry Pi Compute Module 3 (untested). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* build: fix subtarget descriptionsFelix Fietkau2016-09-04
| | | | | | Move Target/Description above the target.mk include Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.4 to version 4.4.19Stijn Tintel2016-08-23
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-31
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image.mk: clean up redundant code related to DEVICE_DTSFelix Fietkau2016-07-15
| | | | | | | | It is used by a core build template, so the variable should be initialized and added to DEVICE_VARS in the core. Same for DEVICE_DTS_DIR Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.4 to version 4.4.15Hauke Mehrtens2016-07-13
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2016-07-09
| | | | | | | As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update to version 4.4.14Hauke Mehrtens2016-06-26
| | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm2708: properly detect the Raspberry Pi ZeroÁlvaro Fernández Rojas2016-06-21
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.13Álvaro Fernández Rojas2016-06-12
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: fix another missing kmod dependencyÁlvaro Fernández Rojas2016-06-09
| | | | | | | kmod-sound-soc-digidac1-soundcard is also missing snd-soc-wm8804 dependency for snd-soc-wm8804-i2c Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: fix missing dependency found by buildbotÁlvaro Fernández Rojas2016-06-09
| | | | | | Add missing dependency to kmod-sound-soc-adau1977-adc. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update linux 4.4 patches to latest versionÁlvaro Fernández Rojas2016-06-08
| | | | | | | | As usual these patches were extracted from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Also alphabetically order sound-soc kernel packages. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: take over maintainershipÁlvaro Fernández Rojas2016-06-08
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.12Álvaro Fernández Rojas2016-06-02
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: fix build error introduced in 2b4e5d47Álvaro Fernández Rojas2016-06-01
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: fix SUBTARGET checks for bcm2709/bcm2710Álvaro Fernández Rojas2016-05-20
| | | | | | This regression was introduced in commit cf58007a Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm2708: explicitly check for SUBTARGET instead of using the device ↵Felix Fietkau2016-05-20
| | | | | | SUBTARGETS variable Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Themed by Ted Yin.