aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
...
* hostapd: fix bringing up AP in AP+mesh configurationsFelix Fietkau2023-09-12
| | | | | | Pass the correct frequency + secondary channel offset to hostapd Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: clear ucode interface/bss resource pointersFelix Fietkau2023-09-12
| | | | | | Avoids potential use-after-free bugs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix applying gratuitous ARP settings with bridge-vlanFelix Fietkau2023-09-12
| | | | | | The arp_accept setting needs to be applied to the snoop_iface Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add missing dependency for iwlwifiFelix Fietkau2023-09-12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix build regressions on linux 6.1Felix Fietkau2023-09-11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to version 6.5Felix Fietkau2023-09-11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: ramips: add support for ALFA Network AX1800RMPiotr Dymacz2023-09-11
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* arm-trusted-firmware-mediatek: fix hang on reboot on MT7622Daniel Golle2023-09-10
| | | | | | | | | With recent updates of TF-A the previously already fixed bug slipped back into the source tree. Again, reorder bl2 init for MT7622 and initialize WDT only after DRAM init has completed to avoid the notorious hang. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: sync mtk-snand driver with SDKDaniel Golle2023-09-10
| | | | | | | | Sync SPI-NAND/ECC controller driver for MT7622, MT7981, MT7986 and MT7988: * Platform data for MT7981 was actually missing and is now added. * Add support for Winbond W25N01KV 1Gbit chip. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Cetron CT3003Patricia Lee2023-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **Hardware specification:** - SoC: MediaTek MT7981B 2x A53 - Flash: ESMT F50L1G41LB 128MB - RAM: Nanya NT5CC128M16JR-EK 256MB - Ethernet: 4 x 10/100/1000 Mbps - Switch: MediaTek MT7531AE - WiFi: MediaTek MT7976C - Button: Reset, Mesh - Power: DC 12V 1A - UART: 3.3v, 115200n8 | Layout: | | :-------- | | <Antenna> | | VCC | | GND | | Tx | | Rx | **Flash instructions:** 1. Rename `openwrt-mediatek-filogic-cetron_ct3003-squashfs-factory.bin` to `factory.bin`. 2. Upload the `factory.bin` using the device's Web interface. 3. Click the upgrade button and wait for the process to finish. 4. Access the OpenWrt interface using the same password. 5. Use the 'Restore' function to reset the firmware to its initial state. **Notes:** If you plan to recovery the stock firmware in the future, it's advisable to connect the device via the serial port and enter failsafe mode to back up all the MTD partitions before proceeding the steps above. Signed-off-by: Patricia Lee <patricialee320@gmail.com>
* uboot-rockchip: add suport for Radxa ROCK Pi EJayantajit Gogoi2023-09-05
| | | | | | | | | | | | | | | | | | | | | | | | | Add uboot support for Radxa ROCK Pi E, rockchip rk3328 board. Add pre-built files to fix swig dependencies. Specification: - CPU: Rockchip RK3328 64-bit Quad-core - RAM: DDR3 256MB ~ 2GB - Network: 1 x 10/100/1000M Ethernet 1 x 10/100M Ethernet - USB Host: 1 x USB3.0 Type A HOST 1 x USB2.0 OTG (40-pin pin-header) - Wireless: RTL8723DU/RTL8821CU - Power Supply: Type-C 5V Installation: - Write image to SD Card or EMMC with dd - Boot ROCK Pi E from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
* wireless-regdb: update to 2023.09.01Yuu Toriyama2023-09-03
| | | | | | | | | | | Changes: 9dc0800 wireless-regdb: Update regulatory rules for Philippines (PH) 111ba89 wireless-regdb: Update regulatory rules for Egypt (EG) from March 2022 guidelines ae1421f wireless-regdb: Update regulatory info for Türkiye (TR) 20e5b73 wireless-regdb: Update regulatory rules for Australia (AU) for June 2023 991b1ef wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
* hostapd: allow adding initial AP without breaking STA interface connectionFelix Fietkau2023-09-03
| | | | | | | | | | When switching from a STA-only configuration to AP+STA on the same phy, the STA was previously restarted in order to notify hostapd of the new frequency, which might not match the AP configuration. Fix the STA restart by querying the operating frequency from within hostapd when bringing up the AP. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix config change detection on boolean valuesFelix Fietkau2023-09-03
| | | | | | Check for null instead of truish value Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix parsing HT secondary channel offsetFelix Fietkau2023-09-02
| | | | | | It returned the wrong value when using HT40- Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: reset center_seg0_idx for 2.4 GHzFelix Fietkau2023-09-02
| | | | | | Fixes 40 MHz channel bandwidth on 2.4 GHz AP+STA Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: use proper helper functions for setting seg0/seg1 idx and chwidthFelix Fietkau2023-09-02
| | | | | | Simplifies code and removes #ifdef statements Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall4: update to the latest versionFelix Fietkau2023-09-01
| | | | | | | | | 23a434d0d15d tests: fix expected test output 840ccdeeabce fw4: avoid emitting invalid rule jump targets 20da9933fd7e fw4: fix another instance of invalid rule jump targets 598d9fbb5179 fw4: remove special cases around hw flow offloading Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove cfg80211 dependencyFelix Fietkau2023-09-01
| | | | | | Always enable nl80211 driver support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to latest git HEADDaniel Golle2023-09-01
| | | | | | 1a07f1dff32b make_ethtool_modes_h.sh: apply anti-bashism Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to latest git HEADDaniel Golle2023-08-31
| | | | | | | | | | | | | | | f429bd94f99e system-linux: switch to new ETHTOOL_xLINKSETTINGS API Fixes AN announcement for speeds beyond 1 GBit/s. Adds new UCI options for Ethernet devices: - autoneg: switch on or off auto-negotiation - pause: if set to 0, do not announce symmetric flow control capability - asym_pause: if set to 0, do not announce asymmetric flow control capability. - rxpause: if set overrides AN and forces RX pause accordingly - txpause: if set overrides AN and forces TX pause accordingly Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: select libopenssl-legacy for openssl variantsFelix Fietkau2023-08-31
| | | | | | Without it, a lot of authentication modes fail without obvious error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove eap-eap192 auth type valueFelix Fietkau2023-08-31
| | | | | | It is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2023-08-31
| | | | | | | | | | | | | | | | | | | db3934d2f740 scripts/netifd-wireless.sh: properly fix WPA3 Enterprise support Support the following values for the different WPA3 Enterprise modes: - wpa3-mixed: WPA3 Enterprise transitional mode This supports EAP with both SHA1 and SHA-256, with optional MFP - wpa3: WPA3 Enterprise only mode This supports only SHA256 with mandatory MFP - wpa3-192: WPA3 Enterprise with mandatory 192 bit support This uses only GCMP-256 ciphers Disable 192 bit support and GCMP-256 ciphers for the regular "wpa3" mode. It seems that even leaving in optional 192 bit support breaks auth on some clients, including iOS devices. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: support eap-eap2 and eap2 auth_type valuesFelix Fietkau2023-08-31
| | | | | | | WPA3 Enterprise-transitional requires optional MFP support and SHA1+SHA256 WPA3 Enterprise-only requires SHA1 support disabled and mandatory MFP. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix FILS key mgmt type for WPA3 Enterprise 192 bitFelix Fietkau2023-08-31
| | | | | | Use the SHA384 variant to account for longer keys with more security Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove non-upstream antenna gain configuration patchFelix Fietkau2023-08-30
| | | | | | | | | It seems that this was not functioning properly and was likely completely unused. Keeping this out of tree also introduced some annoying churn when updating, because of the iw nl80211.h sync patch. If this is needed, it will be reintroduced when/if it is added upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: enable vfio and vfio-pci for armsr-armv8Mathew McBride2023-08-29
| | | | | | | | | Arm platforms with the right hardware blocks (such as GICv3.0+ interrupt controller and SMMU/IOMMU) are able to use vfio-pci to pass through PCI devices to a VM. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* kernel: vfio: remove unneeded enable_unsafe_noiommu_mode parameterMathew McBride2023-08-29
| | | | | | | | | | | | | The vfio module only exposes the enable_unsafe_noiommu_mode parameter if CONFIG_VFIO_NOIOMMU is enabled. When it isn't, the module will complain about an unknown parameter: vfio: unknown parameter 'enable_unsafe_noiommu_mode' ignored As CONFIG_VFIO_NOIOMMU is disabled by the module package, we can remove the module loading parameter. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* arm-trusted-firmware-mediatek: enable built-in 2.5G PHY on MT7988Daniel Golle2023-08-28
| | | | | | | | | | Always enable built-in 2.5G PHY on MT7988 for now, so that it can be used. In future it would be nice to be able to switch power and MDIO access via address 0 at run-time in Linux, both, to be able to use external PHYs at address 0 and to reduce power consumption on systems not using the built-in 2.5G PHY. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix dependency on TF-A for MT7988 RFB (sdmmc)Daniel Golle2023-08-28
| | | | | | | | | The U-Boot build for the MT7988 reference board booting from SD card wrongly depended on the 'ddr4' variant of the ARM TrustedFirmware-A build even though the 'comb' variant is used. Fix that dependency. Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add builds for UniFi 6 LR v2 and v3Daniel Golle2023-08-28
| | | | | | | While the v2 is nearly identical to v1, v3 uses a different PHY and needs a different build for Ethernet to work in U-Boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: build fully-featured U-Boot for MT7988 RFBDaniel Golle2023-08-28
| | | | | | | | | | | | | | | | | | Select many potentially useful options for the MT7988 RFB U-Boot builds. The resulting loader is intended as a development tool and intends to be generic. It does *not* have a default bootcmd set, but allows to boot pretty much everything, including EFI executables. To install this U-Boot build to the eMMC: opkg install mmc-utils partx-utils mmc bootpart enable 1 1 /dev/mmcblk0 echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=*mediatek_mt7988a-rfb-nand-emmc-preloader.bin of=/dev/mmcblk0boot0 dd if=*mediatek_mt7988a-rfb-nand-emmc-gpt.bin of=/dev/mmcblk0 partx -a /dev/mmcblk0 dd if=*mediatek_mt7988a-rfb-nand-emmc-bl31-uboot.fip of=/dev/mmcblk0p3 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ltq-vdsl-vr11-mei: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | Define the old PDE_DATA marco to the new pde_data function. Signed-off-by: Andre Heider <a.heider@gmail.com>
* vrx518_tc: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | | Define the old PDE_DATA marco to the new pde_data function and conditionally use the newer APIs. Signed-off-by: Andre Heider <a.heider@gmail.com>
* vrx518_ep: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | | Unconditionally use the newer APIs, since our oldest supported kernel contains them too. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-ifxos: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | Conditionally use the newer APIs. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-rockchip: fix swig dependency for ROCK64Antonio Flores2023-08-27
| | | | | | Pre build files to fix swig dependency. Signed-off-by: Antonio Flores <antflores627@gmail.com>
* uboot-rockchip: add support for PINE64 ROCK64Antonio Flores2023-08-27
| | | | | | Add uboot support for PINE64 ROCK64, rockchip rk3328 board. Signed-off-by: Antonio Flores <antflores627@gmail.com>
* uboot-sunxi: bump to 2023.04Zoltan HERPAI2023-08-26
| | | | | | | | | | | | | | | | | Compile-tested: all boards Runtime-tested: - Cortex-A8: pcDuino - Cortex-A7: Bananapro, Bananapi M3 - Cortex-A53:Pine64+ Notes: - binman tries to add firmware for the SCP (system control processor), which we don't build, and is optional for the boot process on 64-bit. Disable this via setting the SCP envvar to /dev/null. For further info, see [1] . [1] https://github.com/u-boot/u-boot/blob/master/board/sunxi/README.sunxi64 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kernel: add vhost-net moduleMathew McBride2023-08-26
| | | | | | | | | | | | | | | | vhost-net is used to accelerate traffic to virtualisation guests that use the virtio-net network card in QEMU. Generally it is invoked by specifying "vhost=on" to a QEMU -netdev device: qemu-system-aarch64 -nographic -M virt -cpu host \ --enable-kvm -bios u-boot.bin -smp 1 -m 2048 \ -drive file=openwrt-armsr-armv8.img,format=raw,index=0,media=disk \ -device "virtio-net,netdev=landev,disable-legacy=off,disable-modern=off" \ -netdev "tap,id=landev,helper=/usr/lib/qemu-bridge-helper --br=br-lan,vhost=on" Signed-off-by: Mathew McBride <matt@traverse.com.au>
* arm-trusted-firmware-mvebu: bump to v2.9Robert Marko2023-08-26
| | | | | | We are using the outdated 2.7 TF-A, so lets update to current v2.9 version. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: update CM3 GCC to 12.3rel1Robert Marko2023-08-26
| | | | | | | | | We are using the outdated 11.2 GCC for CM3, lets update to the current 12.3rel1 version from ARM [1]. [1] https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump cryptopp to version 8.8Robert Marko2023-08-26
| | | | | | | We are using the outdated Crypto++ version 8.5, so lets update to the current version 8.8. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump mox-boot-builder to current versionRobert Marko2023-08-26
| | | | | | | | | | | | | | | | | We have to move to use git clone as there are no newer tagged releases. Changes: 604f8f5 Default CROSS_CM3 to arm-none-eabi- instead of armv7m-softfloat-eabi- b9b9419 Tidy up license information 0290b2c wtmi: Fix typo a10b8e9 Makefile: fix a53-firmware.bin generation (maximum size is not optimal) f654082 wtmi: Add const qualifier to isr_vector 4a43a3b wtmi: Improve detection of ESPRESSObin boards with Topaz 189e629 wtmi: Improve detection of boards with insufficient MDIO pull-up 3dac4fe wtmi: Fix detection of Armada 3720 Devel Board 3ca4dfa Bump mox-imager commit Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump mv-ddr-marvell to current versionRobert Marko2023-08-26
| | | | | | | | Changes: 1de442d Convert floating point operations to integer operations ce6770d Modify mv_ddr4_calibration_validate function body to match function header Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump a3700-utils to current versionRobert Marko2023-08-26
| | | | | | | | Changes: a3e1c67 wtmi: Fix linker output sections f65e3bf wtmi: Remove usage of non-existant string.h file and memcpy() function Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mac80211: Add ath11k to the help text of ATH_DEBUGJacob Aharon2023-08-25
| | | | | | | ATH_DEBUG package is required to debug ath11k. Fixes: 93ae4353cdf6 ("mac80211: add ath11k PCI support") Signed-off-by: Jacob Aharon <ah.jacob@gmail.com>
* uboot-envtools: fix parallel buildingRobert Marko2023-08-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent envtools update to 2023.07.02 has introduced a breakage when trying to parallel build with the following error: /bin/sh: line 1: scripts/basic/fixdep: No such file or directory Luckily it can easily be reproduced locally via a simple script so it was not hard to bisect it down to upstream commit [1]. However, its not that commits fault, it just uncovered an issue with the way we have been building envtools for a long time, maybe even from the package introduction. The issue is that we are trying to build envtools as one of the U-Boot no-dot-config-targets but envtools was newer a valid target for it but since we were creating the config headers that were not actually used it was actually building all this time. Since the blamed commit [1] a tool called printinitialenv is built and now a proper config is actually required in order for prerequisites to get built properly. So, in order to properly fix this (Hopefully for good) lets stop pretending that envtools are a valid no-dot-config-targets target and use the tools-only defconfig which is meant exactly for just building the tools. This will make a minimal config for the U-Boot sandbox target and then envtools will build just fine in parallel mode (I tested with 32 threads). We do hovewer need to override the ARCH passed by OpenWrt and set it to sandbox as otherwise U-Boot will not find the required headers because the ARCH is being overriden to an incorrect one. [1] https://source.denx.de/u-boot/u-boot/-/commit/40b77f2a3ac13a7547c1b7c9c51a4090869de8f4 Fixes: 9db033005210 ("uboot-envtools: update to 2023.07.02") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mt76: update to the latest versionFelix Fietkau2023-08-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bdf7ca5db707 wifi: mt76: mt7921: move common register definition in mt792x_regs.h ae15d5c6b567 wifi: mt76: mt7921: convert acpisar and clc pointers to void 02515b6b90f0 wifi: mt76: mt7921: rename mt7921_vif in mt792x_vif 6ed8a8bdc7b6 wifi: mt76: mt7921: rename mt7921_sta in mt792x_sta 80234e64e7c5 wifi: mt76: mt7921: rename mt7921_phy in mt792x_phy 2485b4222d3d wifi: mt76: mt7921: rename mt7921_dev in mt792x_dev c6fd7cde77e0 wifi: mt76: mt7921: rename mt7921_hif_ops in mt792x_hif_ops 1a1a57b5f8c4 wifi: mt76: mt792x: move shared structure definition in mt792x.h 68508aab4241 wifi: mt76: mt7921: move mt792x_mutex_{acquire/release} in mt792x.h ff306af07e65 wifi: mt76: mt7921: move mt792x_hw_dev in mt792x.h 4b49d659acab wifi: mt76: mt7921: Replace fake flex-arrays with flexible-array members 93f821cce8f5 wifi: mt76: mt792x: introduce mt792x-lib module de7b90721280 wifi: mt76: mt7921: move mac shared code in mt792x-lib module c68ee8a64bef wifi: mt76: mt7921: move dma shared code in mt792x-lib module 8d561811f271 wifi: mt76: mt7921: move debugfs shared code in mt792x-lib module 0034ae289046 wifi: mt76: mt7921: move init shared code in mt792x-lib module 8419c4e793a7 wifi: mt76: mt792x: introduce mt792x_irq_map b7c7fadf228c wifi: mt76: mt792x: move more dma shared code in mt792x_dma 0b1603ce707c wifi: mt76: mt7921: move hif_ops macro in mt792x.h e07540abe87a wifi: mt76: mt7921: move shared runtime-pm code on mt792x-lib 3d65cd7a8dad wifi: mt76: mt7921: move runtime-pm pci code in mt792x-lib 4551f8c838e6 wifi: mt76: mt7921: move acpi_sar code in mt792x-lib module bd84b8ebaff8 wifi: mt76: mt792x: introduce mt792x-usb module 7067ea0f1bab wifi: mt76: mt792x: move mt7921_load_firmware in mt792x-lib module cf752af84c35 wifi: mt76: mt76_connac3: move lmac queue enumeration in mt76_connac3_mac.h 700041dcf773 wifi: mt76: mt792x: move MT7921_PM_TIMEOUT and MT7921_HW_SCAN_TIMEOUT in common code 58b2b90ad89b wifi: mt76: mt7921: move mt7921_dma_init in pci.c 9e4cb87a04cf wifi: mt76: mt7921: move mt7921u_disconnect mt792x-lib c19b62fe6b68 wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH 4904ab2f87cd wifi: mt76: fix return value check in mt76x02_mac_process_rx 1f0fbbee359c wifi: mt76: mt7915: fix tlv length of mt7915_mcu_get_chan_mib_info 24a54ee3a5ec wifi: mt76: mt7915: fix power-limits while chan_switch 80b8bcf0e3ea wifi: mt76: mt7603: rework/fix rx pse hang check a8d9553d8fc4 wifi: mt76: mt7603: improve watchdog reset reliablity c03d84c0d018 wifi: mt76: mt7603: improve stuck beacon handling 85cc58378d25 wifi: mt76: mt7603: add missing register initialization for MT7628 b14c2351ddb8 wifi: mt76: mt7603: disable A-MSDU tx support on MT7628 Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Themed by Ted Yin.