aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
...
* dropbear: allow more complex configurationKonstantin Demin2024-02-09
| | | | | | | | | | | | | | - switch DB_OPT_COMMON and DB_OPT_CONFIG to comma-separated lists: this allows to have values with "|" in DB_OPT_COMMON and DB_OPT_CONFIG which is more likely to be than values with commas; use $(comma) variable for values with commas. - sort DB_OPT_COMMON and DB_OPT_CONFIG to have "overrides" on top of list. - allow DB_OPT_COMMON to have values with commas. - allow to replace multiline definitions in sysoptions.h. improves e1bd9645 Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* dropbear: cherry-pick upstream patchesKonstantin Demin2024-02-09
| | | | | | | | | | | | | | | | | | | | | | critical fixes: - libtommath: possible integer overflow (CVE-2023-36328) - implement Strict KEX mode (CVE-2023-48795) various fixes: - fix DROPBEAR_DSS and DROPBEAR_RSA config options - y2038 issues - remove SO_LINGER socket option - make banner reading failure non-fatal - fix "noremotetcp" behavior - don't try to shutdown a pty - fix test for multiuser kernels adds new features: - option to bind to interface - allow inetd with non-syslog - ignore unsupported command line options with dropbearkey Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* dropbear: bump to 2022.83Konstantin Demin2024-02-09
| | | | | | | | | | | | - update dropbear to latest stable 2022.83; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES - drop patches: - 001-fix-MAX_UNAUTH_CLIENTS-regression.patch - rework patches: - 901-bundled-libs-cflags.patch - refresh remaining patches Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* lldpd: add option to force EDPStephen Howell2024-02-08
| | | | | | allow EDP support if compiled and add force EDP option Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: only use snmp options when compiled inStephen Howell2024-02-08
| | | | | | prevent SNMP options being passed unless lldpd supports them Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: Update Makefile package releaseStephen Howell2024-02-08
| | | | | | increment Makefile package release to reflect changes to init script Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: add option for tx delay and tx holdStephen Howell2024-02-08
| | | | | | add option to set LLDP transmit delay, hold timers to set update frequency Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: add option to set system platformStephen Howell2024-02-08
| | | | | | add option to override system platform instead of using kernel name Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: add option to force SONMP enabledStephen Howell2024-02-08
| | | | | | add option to force SONMP to be enabled even when no peer detected Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: add option to force FDP onStephen Howell2024-02-08
| | | | | | add option to force FDP when no peers detected Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: set CDP version and allow forcing CDP onStephen Howell2024-02-08
| | | | | | add option to specify CDPv1 or CDPv2 and separately enable or force each Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: allow disabling LLDP protcolStephen Howell2024-02-08
| | | | | | add option to allow LLDP disabling while using other supported protocols Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: add portidsubtype optionStephen Howell2024-02-08
| | | | | | add option portidsubtype to correct port identifiers and descriptions Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: add agent-type optionStephen Howell2024-02-08
| | | | | | add option to set agent-type to control propogation Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: add LLDP MED optionsStephen Howell2024-02-08
| | | | | | add option to enable LLDP MED fast-start and set fast-start timer Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: option to disable LLDP-MED inventory TLVStephen Howell2024-02-08
| | | | | | add option to disable LLDP-MED inventory TLV transmission Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: Init adds no-version optionStephen Howell2024-02-08
| | | | | | add option to disable advertising kernel version Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: Allow neighbour filteringStephen Howell2024-02-08
| | | | | | add filter option to init script. Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: LLDPD binds to only specified interfacesStephen Howell2024-02-08
| | | | | | | Bind to the configured system interfaces only. Switchport interfaces are no longer ignored and uci interface values for LLDPD are honored. Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* lldpd: Init config read on reloadStephen Howell2024-02-08
| | | | | | | | | Init script reload with trigger to detect config file update. Reload command added to attempt non-impactful lldpd reload where lldpcli can be used to update config without process restart. Config hash function used to track whether process restart is needed. Signed-off-by: Stephen Howell <howels@allthatwemight.be>
* strace: update to 6.7Nick Hainke2024-02-07
| | | | | | | Release Notes: https://github.com/strace/strace/releases/tag/v6.7 Signed-off-by: Nick Hainke <vincent@systemli.org>
* base-files/leds: add setting the LED color via uciFlorian Eckert2024-02-07
| | | | | | | | | | | | | | | | Add the possibility that colored LEDs can also be configured via the uci. config led 'led1' option name '<name>' option sysfs '<path>' option trigger 'default-on' option default '1' --> option color_{$color} '<0-255>' The supported names of the variable "${color}" for the selected LED can be queried in the file with the name 'multi_index'. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files/leds: merging code sequences that belongs togetherFlorian Eckert2024-02-07
| | | | | | | Setting the trigger and checking whether the trigger can be set belong together and should not be interrupted by other lines of code. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files/leds: save led color value if availableFlorian Eckert2024-02-07
| | | | | | | | | | | | | There are monochrome LEDs that can only display one color. However, there are also LEDs that can display multiple colors. This can be tested in the led subsystem of the kernel if the files 'multi_index' and 'multi_intensity' are present in the folder '/sys/class/leds/<ledname>'. Until now it was not possible to reset the default color. This commit adds the missing information in the file '/var/run/led.state' so that the bootup color can be seen on the LED again when the LED configuration has been changed. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kexec-tools: update to 2.0.28Nick Hainke2024-02-06
| | | | | | | | Release Notes: - https://www.spinics.net/lists/kexec/msg32139.html - https://www.spinics.net/lists/kexec/msg33447.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* wifi-scripts: fix copy&paste issue in metadataFelix Fietkau2024-02-06
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: modules: video: add missing video-mem2mem symbolÁlvaro Fernández Rojas2024-02-05
| | | | | | v4l2-mem2mem.ko needs CONFIG_V4L2_MEM2MEM_DEV symbol. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: modules: video: add missing video-videobuf2 symbolÁlvaro Fernández Rojas2024-02-05
| | | | | | videobuf2-v4l2.ko needs CONFIG_VIDEOBUF2_V4L2 symbol. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: modules: video: remove v4l2-common from video-coreÁlvaro Fernández Rojas2024-02-05
| | | | | | | v4l2-common.ko was merged into videodev.ko and no longer exists. Fixes: ac5671f46cb4 ("kernel: remove obsolete kernel version switches for 4.19") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wireless-regdb: update to 2024.01.23Yuu Toriyama2024-02-04
| | | | | | | | | | | | | | | | The maintainer and repository of wireless-regdb has changed. https://lore.kernel.org/all/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/ Changes: 37dcea0 wireless-regdb: Update keys and maintainer information 9e0aee6 wireless-regdb: Makefile: Reproducible signatures 8c784a1 wireless-regdb: Update regulatory rules for China (CN) 149c709 wireless-regdb: Update regulatory rules for Japan (JP) for December 2023 bd69898 wireless-regdb: Update regulatory rules for Singapore (SG) for September 2023 d695bf2 wireless-regdb: Update and disable 5470-5730MHz band according to TPC requirement for Singapore (SG) 4541300 wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
* mt76: update to Git HEAD (2024-02-03)Felix Fietkau2024-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a9693e1979c2 linux-firmware: add firmware for MT7996 0258dc90e3a1 wifi: mt76: mt7603: fix reading target power from eeprom 3e81173d9e2b wifi: mt76: mt7603: initialize chainmask 786a339bac36 wifi: mt76: mt7996: fix fortify warning bc37a7ebc267 wifi: mt76: mt7996: fix fw loading timeout 027bab6a88a3 wifi: mt76: usb: create a dedicated queue for psd traffic e8909c610c3b wifi: mt76: usb: store usb endpoint in mt76_queue 8b3d96fa4ead wifi: mt76: mt792xu: enable dmashdl support 7864d7ad0ed0 wifi: mt76: mt76x2u: add netgear wdna3100v3 to device table 27c81f7c1480 wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band b7443c63069a wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band bab721a65f5a wifi: mt76: mt7925: fix mcu query command fail 1f0f71ed81e8 wifi: mt76: mt7925: fix wmm queue mapping bcfe2ad966f3 wifi: mt76: mt7925: fix fw download fail f982c3d67a29 wifi: mt76: mt7925: fix WoW failed in encrypted mode 6a72716ec213 wifi: mt76: mt7925: fix the wrong header translation config 50928b7e1359 wifi: mt76: mt7925: add flow to avoid chip bt function fail 762ab4530e8f wifi: mt76: mt7925: add support to set ifs time by mcu command 87deaf82efa4 wifi: mt76: mt7925: update PCIe DMA settings c190c1576522 wifi: mt76: mt7925: support temperature sensor 025d5734caba wifi: mt76: mt7996: check txs format before getting skb by pid 4768bfa2baca wifi: mt76: mt7996: fix TWT issues a65e3eced907 wifi: mt76: mt7996: disable AMSDU for non-data frames d71716d93aee wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps f21728f3f4bd wifi: mt76: mt7996: ensure 4-byte alignment for beacon commands 68dad7dacd2a wifi: mt76: mt7996: fix HE beamformer phy cap for station vif 66a28f340cdc wifi: mt76: mt7996: mark GCMP IGTK unsupported b47ad8a7764e wifi: mt76: mt7996: fix efuse reading issue c2fc7dae7b72 wifi: mt76: mt7996: remove TXS queue setting e0f1ed168ed5 wifi: mt76: mt7996: add locking for accessing mapped registers d0cc92c1fd08 wifi: mt76: connac: set correct muar_idx for mt799x chipsets ae0c62279adc wifi: mt76: mt7996: fix HIF_TXD_V2_1 value ecc14276af54 wifi: mt76: mt792x: fix ethtool warning 9827df56b241 wifi: mt76: move wed common utilities in wed.c dccbd2598505 wifi: mt76: mt7925: fix the wrong data type for scan command 9907f4f20261 wifi: mt76: mt792x: add the illegal value check for mtcl table of acpi 1b088a7ac06d wifi: mt76: mt7921e: fix use-after-free in free_irq() f3c5b4820d7f wifi: mt76: mt7925e: fix use-after-free in free_irq() d75eac9f5531 wifi: mt76: mt7921: fix incorrect type conversion for CLC command 7bd5401f5bb1 wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI ea55196bc4a0 wifi: mt76: mt792x: update the country list of EU for ACPI SAR 6124ea9135ed wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspend Signed-off-by: Felix Fietkau <nbd@nbd.name>
* broadcom-wl: remove packageFelix Fietkau2024-02-03
| | | | | | | Also remove remaining wireless extension support, since this package was the only in-tree user of it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wifi-scripts: add script to add phy capabilities to board.jsonFelix Fietkau2024-02-03
| | | | | | | Useful for UI and config generators. Will be used as intermediate step for generating the default wifi configuration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wifi-scripts: add new package, move wifi scripts to a single placeFelix Fietkau2024-02-03
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: modules: video: fix video-coda for 6.1Tim Harvey2024-02-02
| | | | | | | The coda kernel modules were moved between 5.15 and 6.1. Adapt the coda-vpu and imx-vdoa modules for that. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix drm-imx for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 changed DRM_GEM_DMA_HELPER to a module (drm_dma_helper.ko). Add this to the drm-imx to fix module dependencies. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix kmod-imx-pxp build for 6.1Lech Perczak2024-02-02
| | | | | | | Location of the module file was changed between 5.15 and 6.1. Adapt the recipe for that. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: modules: video: fix video-core for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 wraps core video drivers in a MEDIA_PLATFORM_DRIVERS submenu. Enable that for 6.1 and add some new necessary undefines to target/linux/generic/config-6.1 to avoid build failures. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix kmod-video-imx-ldb build under 6.1Lech Perczak2024-02-02
| | | | | | | drm_dp_aux_bus.ko isn't built or required anymore under kernel 6.1. Mark that in the recipe. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: modules: video: fix deps for kmod-drm-imx-hdmi for 6.1Lech Perczak2024-02-02
| | | | | | | kmod-drm-imx-hdmi depends on kmod-drm-display-helper since 6.1. Include that in OpenWrt's recipes. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* zlib: update to 1.3.1Nick Hainke2024-02-02
| | | | | | | | | | Release Notes: https://github.com/madler/zlib/releases/tag/v1.3.1 Refresh patch: - 004-attach-sourcefiles-in-patch-002-to-buildsystem.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq: add support for AVM Fritzbox 7490Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 7490 device. It contains two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module and is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem Unsupported: - DECT and ISDN telephony Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* mediatek: add Comfast CF-E393AX supportDavid Bentham2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Comfast CF-E393AX is a dual-band Wi-Fi 6 POE ceiling mount access point. Oem firmware is a custom openwrt 21.02 snapshot version. We can gain access via ssh once we remove the root password. Hardware specification: SoC: MediaTek MT7981A 2x A53 Flash: 128 MB SPI-NAND RAM: 256MB DDR3 Ethernet: 1x 10/100/1000 Mbps built-in PHY (WAN) 1x 10/100/1000/2500 Mbps MaxLinear GPY211C (LAN) Switch: MediaTek MT7531AE WiFi: MediaTek MT7976D LEDS: 1x (Red, Blue and Green) Button: Reset UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | VCC GND TX RX | <= | | ----------------- | -------------------------- Gain SSH access: 1. Login into web interface (http://apipaddress/computer/login.html), and download the configuration(http://apipaddress/computer/config.html). 2. Rename downloaded backup config - 'backup.file to backup.tar.gz', Enter 'fakeroot' command then decompress the configuration: tar -zxf backup.tar.gz 3. Edit 'etc/shadow', update (remove) root password: With password = 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' to Without password = 'root::0:99999:7:::' 'root::0:99999:7:::' 4. Repack 'etc' directory back to a new backup file: tar -zcf backup-ssh.tar.gz etc/ 5. Rename new config tar.gz file to 'backup-ssh.file' Exit fakeroot - 'exit' 6. Upload new configuration via web interface, now you can SSH with the following: 'ssh -vv -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa root@192.168.10.1'. Backup the mtd partitions - https://openwrt.org/docs/guide-user/installation/generic.backup 7. Copy openwrt factory firmware to the tmp folder to install via ssh: 'scp -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa \ *-mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin \ root@192.168.10.1:/tmp/' 'sysupgrade -n -F \ /tmp/*--mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin' 8. Once led has stopped flashing - Connect via ssh with the default openwrt ip address - 'ssh root@192.168.1.1' 9. SSH copy the openwrt sysupgrade firmware and upgrade as per the default instructions. Signed-off-by: David Bentham <db260179@gmail.com>
* openssl: update to 3.0.13Ivan Pavlov2024-02-02
| | | | | | | | | | | | | | | | Major changes between OpenSSL 3.0.12 and OpenSSL 3.0.13 [30 Jan 2024] * Fixed PKCS12 Decoding crashes ([CVE-2024-0727]) * Fixed Excessive time spent checking invalid RSA public keys ([CVE-2023-6237]) * Fixed POLY1305 MAC implementation corrupting vector registers on PowerPC CPUs which support PowerISA 2.07 ([CVE-2023-6129]) * Fix excessive time spent in DH check / generation with large Q parameter value ([CVE-2023-5678]) Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* uhttpd: bump PKG_RELEASEDaniel Golle2024-02-02
| | | | | | | | Bump PKG_RELEASE which should have been done by commit 7b1c3068b7 ("uhttpd: restart when interface to listen becomes available"). Fixes: 7b1c3068b7 ("uhttpd: restart when interface to listen becomes available") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: move gpio packages to gpio menuChukun Pan2024-02-01
| | | | | | Move gpio packages to the 'GPIO support' menu. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: modules: move gpio modules to gpio menuChukun Pan2024-02-01
| | | | | | | | Since we have the 'GPIO support' menu, it is strange to look up gpio related modules in 'Other modules' menu. So move these modules and put them in the gpio menu. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: modules: gpio.mk: renamed from gpio-cascade.mkChukun Pan2024-02-01
| | | | | | This can be used to place the gpio module, so rename it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ucode: add libjson-c/host dependencyChad Monroe2024-02-01
| | | | | | ensure host libjson-c is built prior to ucode Signed-off-by: Chad Monroe <chad@monroe.io>
* base-files: upgrade: nand.sh: mute umount errorDaniel Golle2024-02-01
| | | | | | | | | | Send error output of umount to /dev/null to mute error in case ubiblock device has already been unmounted (which is usually the case). Gets rid of bogus error message: umount: can't unmount /dev/ubiblock0_4: Invalid argument Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Powered by cgit, Themed by Ted Yin.