aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
...
* kernel: qca-ssdk: add kernel 6.1 supportRobert Marko2023-05-28
| | | | | | | Add kernel 6.1 support to SSDK, it was just a case of adding the kernel version identification and fixing up get_random_u32. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-ct: drop spectral fix for 5.10Robert Marko2023-05-28
| | | | | | | This was needed when we had 5.10 kernel as well, but now that all targets are running 5.15 or 6.1 we can safely drop it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-ct: use 6.2 versionRobert Marko2023-05-28
| | | | | | | | | | | ath10k-ct now offers 6.2 and 6.4 versions, so lets update to use 6.2 so we can get rid of the API update patch as well as NVMEM as that is already present in the newer driver. Ben merged the debug compilation patch so we can remove that one as well. Update patches to point to 6.2 version and refresh them. Signed-off-by: Robert Marko <robimarko@gmail.com>
* uboot-sifiveu: add bootloader package for SiFive Ux40 boardsZoltan HERPAI2023-05-28
| | | | | | | Add new package for building bootloader for the SiFive U-series boards. Supported boards at this stage are the HiFive Unleashed and HiFive Unmatched. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* openssl: add linux-riscv64 into the targets listZoltan HERPAI2023-05-28
| | | | | | | Add "linux-riscv64-openwrt" into openssl configurations to enable building on riscv64. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* opensbi: add package for RISC-VZoltan HERPAI2023-05-28
| | | | | | | | | | | | | | OpenSBI is a form of a first-stage bootloader, which initializes certain parts of an SoC and then passes on control to the second stage bootloader i.e. an u-boot image. We're introducing the package with release v1.2, which provides SBI v0.3 and the SBI SRST extensions which helps to gracefully reboot/shutdown various HiFive-U SoCs. Tested on SiFive Unleashed and Unmatched boards. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kernel: kmod-rxrpc: add missing dependenciesTony Ambardar2023-05-28
| | | | | | | | | | | | | | | | From commit dc0e6056de ("rxrpc: Fix missing dependency on NET_UDP_TUNNEL") upstream, kmod-rxrpc uses functions enabled by CONFIG_NET_UDP_TUNNEL. Add package dependencies on kmod-udptunnel4 and kmod-udptunnel6 to avoid build errors like: Package kmod-rxrpc is missing dependencies for the following libraries: ip6_udp_tunnel.ko udp_tunnel.ko This change applies to both kernels 5.15 and 6.1. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ca-certificates: Update to version 20230311Tianling Shen2023-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the ca-certificates and ca-bundle package from version 20211016 to version 20230311. Use TAR_OPTIONS instead of hacking Build/Prepare, refresh patches. Debian change-log entry [1]: |[...] |[ Đoàn Trần Công Danh ] |* ca-certificates: compat with non-GNU mktemp (closes: #1000847) | |[ Ilya Lipnitskiy ] |* certdata2pem.py: use UTC time when checking cert validity | |[ Julien Cristau ] |* Update Mozilla certificate authority bundle to version 2.60 | The following certificate authorities were added (+): | + "Autoridad de Certificacion Firmaprofesional CIF A62634068" | + "Certainly Root E1" | + "Certainly Root R1" | + "D-TRUST BR Root CA 1 2020" | + "D-TRUST EV Root CA 1 2020" | + "DigiCert TLS ECC P384 Root G5" | + "DigiCert TLS RSA4096 Root G5" | + "E-Tugra Global Root CA ECC v3" | + "E-Tugra Global Root CA RSA v3" | + "HARICA TLS ECC Root CA 2021" | + "HARICA TLS RSA Root CA 2021" | + "HiPKI Root CA - G1" | + "ISRG Root X2" | + "Security Communication ECC RootCA1" | + "Security Communication RootCA3" | + "Telia Root CA v2" | + "TunTrust Root CA" | + "vTrus ECC Root CA" | + "vTrus Root CA" | The following certificate authorities were removed (-): | - "Cybertrust Global Root" (expired) | - "EC-ACC" | - "GlobalSign Root CA - R2" (expired) | - "Hellenic Academic and Research Institutions RootCA 2011" | - "Network Solutions Certificate Authority" | - "Staat der Nederlanden EV Root CA" (expired) |* Drop trailing space from debconf template causing misformatting | (closes: #980821) | |[ Wataru Ashihara ] |* Make certdata2pem.py compatible with cryptography >= 35 (closes: #1008244) |[...] [1]: https://metadata.ftp-master.debian.org/changelogs/main/c/ca-certificates/ca-certificates_20230311_changelog Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-mediatek: add Qihoo 360T7 supportChukun Pan2023-05-27
| | | | | | | The vendor uboot will verify firmware at boot. So add a custom uboot build for this device. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* arm-trusted-firmware-mediatek: add build for MT7981 DDR3Chukun Pan2023-05-27
| | | | | | | | Add new build option BOARD_QFN/BOARD_BGA. This option is only useful for MT7981 device. MT7981A/B: BOARD_BGA, MT7981C: BOARD_QFN. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: mt7981: add reserved memory to support pstoreAlexander Couzens2023-05-27
| | | | | | | | Add reserved memory for pstore/ramoops to device tree used by Linux as well as U-Boot. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: remove legacy unused lib80211 support patchFelix Fietkau2023-05-26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove unused legacy wireless extension supportFelix Fietkau2023-05-26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq-wifi: bump to latest git HEADAntti Nykänen2023-05-26
| | | | | | | | | | 0f73d32 ipq8074: update RegDB in new submitted BDF a4cd21f ipq8074: add Compex WPQ873 BDF c888dd0 qca-wireless: ipq40xx: Add BDFs for Eero Cento 6388ba9 ipq8074: update regdb for Netgear SXK80 BDF 77775d2 ipq8074: add Netgear SXK80 Signed-off-by: Antti Nykänen <antti.nykanen@nokia.com>
* ipq807x: add support for Compex WPQ873Antti Nykänen2023-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Compex WPQ873 is a development board with two M.2 B-key slots for cellular modems. Device info: - IPQ8072A SoC - 512MiB RAM - 256MiB NAND flash - 8MiB SPI NOR - 3x 1GigE ports - 1x 2.5GigE port - 2.4GHz/5GHz AX WLAN - 1x USB 3.0 port - 1x M.2 B-key socket with PCIe 3.0 - 1x M.2 B-key socket with PCIe 2.0 and USB 3.0 - 4x SIM card slots - Bluetooth LE 5.0 (QCA4024) Prerequisites 1) TFTP server 2) 3.3V USB to TTL cable for UART console 2.54mm pitch 4-pin header for UART is readily provided on board, no modifications are necessary to access it TTL connector pinout: 2=TX, 3=RX, 4=GND Arrow marks pin 1 which is 3.3V Serial port settings: 115200 8N1 no flow control The device will most likely ship with a QSDK-based firmware. 1. Power on device and interrupt u-boot to obtain u-boot CLI 2. set serverip to IP address of the TFTP server, for example: `setenv serverip 192.168.1.10` 3. Download image from TFTP server: `tftpboot 0x44000000 openwrt-ipq807x-generic-compex_wpq873-squashfs-factory.ubi` 4. Flash ubi image to both partitions and reset: `sf probe imxtract 0x44000000 ubi nand device 0 nand erase 0x0 0x3400000 nand erase 0x3c00000 0x3400000 nand write $fileaddr 0x0 $filesize nand write $fileaddr 0x3c00000 $filesize reset` Afterwards, you can use sysupgrade to flash new OpenWRT images. Signed-off-by: Antti Nykänen <antti.nykanen@nokia.com>
* bpftools: update, split off bpftool and libbpf packagesTony Ambardar2023-05-24
| | | | | | | | | | | | | | My original bpftools package made "variant" builds of bpftool and libbpf as a convenience, since both used the same local kernel sources with the same versioning. This is no longer the case, since the commit below switched to using an out-of-tree build mirror hosting repos for each. Replace bpftools with separate bpftool and libbpf packages, each simplified and correctly versioned. Also fix the broken libbpf ABI introduced in the same commit. Existing build .config files are not impacted. Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ubnt-ledbar: depend on mediatek and ramips subtargetsTomasz Maciej Nowak2023-05-24
| | | | | | | It's only used on devices in mt7621 and mt7622 subtargets, so no reason to compile it for others. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ubnt-ledbar: add kernel 6.1 compatTomasz Maciej Nowak2023-05-24
| | | | | | | As of ed5c2f5fd10d ("i2c: Make remove callback return void") return value of remove function is ignored. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* kernel: qca-ssdk: backport support for building as kernel moduleRobert Marko2023-05-23
| | | | | | | | | | | | | | Currently, SSDK is rather special in the sense that its not being built as a proper out of tree module at all but rather like a userspace application and that involves a lot of make magic which unfortunately broke with make version 4.4 and newer. Luckily QCA finally added a way to build SSDK as an out of tree module and it uses the kernel buildsystem which makes it compile with make 4.4 as well. So lets backport the support for it and switch to using it. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: backport merged version of A-MSDU mesh patchRobert Marko2023-05-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel 6.1 now has fortify_memcpy_chk() and it is causing the following warning while trying to compile backports: CC [M] /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/net/wireless/util.o In file included from ./include/linux/string.h:253, from /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/backport-include/linux/string.h:3, from ./include/linux/bitmap.h:11, from ./include/linux/cpumask.h:12, from ./include/linux/smp.h:13, from ./arch/arm64/include/asm/arch_timer.h:18, from ./arch/arm64/include/asm/timex.h:8, from ./include/linux/timex.h:67, from ./include/linux/time32.h:13, from ./include/linux/time.h:60, from /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/backport-include/linux/time.h:3, from ./include/linux/skbuff.h:15, from /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/backport-include/linux/skbuff.h:3, from ./include/linux/if_ether.h:19, from /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/backport-include/linux/if_ether.h:3, from ./include/linux/etherdevice.h:20, from /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/backport-include/linux/etherdevice.h:3, from /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/net/wireless/util.c:12: In function 'fortify_memcpy_chk', inlined from 'ieee80211_strip_8023_mesh_hdr' at /home/robimarko/Building/AX3600/ipq807x-5.15/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/backports-6.1.24/net/wireless/util.c:590:3: ./include/linux/fortify-string.h:404:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 404 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors This issue was fixed in the final version of ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") that was merged upstream but we have a older version that is using: memcpy(&payload.eth.h_dest, mesh_addr, 2 * ETH_ALEN); instead of: memcpy(&payload.eth, mesh_addr, 2 * ETH_ALEN); So, lets just backport the merged version of patch to fix the issue. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: modules: fs: adapt for kernel 6.1Robert Marko2023-05-22
| | | | | | | | | | Adapt filesystem kmods for building under kernel 6.1: * Depend on kernel not being 5.10 rather than only 5.15 * kmod-fs-9p depends on kmod-fs-netfs from 5.17 as they started using netfs helpers * Set new KConfig options to N Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: modules: wwan: adapt for kernel 6.1Robert Marko2023-05-22
| | | | | | | | | Update the WWAN kmods for compilation under kernel 6.1: * Depend on kernel not being 5.10 rather than only 5.15 * Enable CONFIG_WWAN_DEBUGFS as its now optional from 5.17 * Add missing symbols for new WWAN drivers to generic config Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: modules: adapt for kernel 6.1Christian Marangi2023-05-22
| | | | | | Adapt kernel modules to support kernel 6.1. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* busybox: update to 1.36.1Nick Hainke2023-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release Notes: http://lists.busybox.net/pipermail/busybox-cvs/2023-May/041510.html Refresh commands, run after busybox is first built once (nothing changed compared to 1.36.0): cd package/utils/busybox/config/ ../convert_menuconfig.pl ../../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1 cd .. ./convert_defaults.pl ../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1/.config > Config-defaults.in Manual edits needed afterward: * Config-defaults.in: OpenWrt config symbol IPV6 logic applied to BUSYBOX_DEFAULT_FEATURE_IPV6 * Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec) * Config-defaults.in: OpenWrt logic applied to BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917) * Config-defaults.in: correct the default ports that get reset BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80 BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23 * config/editors/Config.in: Add USE_GLIBC dependency to BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090) * config/shell/Config.in: change at "Options common to all shells" the conditional symbol SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html Apparently our script does not see the hidden option while prepending config options with "BUSYBOX_CONFIG_" which leads to a missed dependency when the options are later evaluated.) * Edit a few Config.in files by adding quotes to sourced items in config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f) Tested-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Nick Hainke <vincent@systemli.org>
* libxml2: update to 2.11.4Nick Hainke2023-05-22
| | | | | | | Release Notes: https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.4 Signed-off-by: Nick Hainke <vincent@systemli.org>
* libcap: update to 2.69Nick Hainke2023-05-22
| | | | | | | | Release Notes: https://sites.google.com/site/fullycapable/release-notes-for-libcap#h.iuvg7sbjg8pe Fixes: CVE-2023-2602 CVE-2023-2603 Signed-off-by: Nick Hainke <vincent@systemli.org>
* lldpd: update to 1.0.17Nick Hainke2023-05-22
| | | | | | | Release Notes: https://github.com/lldpd/lldpd/releases/tag/1.0.17 Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: add support for Zyxel EX5601-T0 routerPietro Ameruoso2023-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zyxel EX5601-T0 specifics -------------- The operator specific firmware running on the Zyxel branded EX5601-T0 includes U-Boot modifications affecting the OpenWrt installation. Partition Table | dev | size | erasesize | name | | ---- | -------- | --------- | ------------- | | mtd0 | 20000000 | 00040000 | "spi0.1" | | mtd1 | 00100000 | 00040000 | "BL2" | | mtd2 | 00080000 | 00040000 | "u-boot-env" | | mtd3 | 00200000 | 00040000 | "Factory" | | mtd4 | 001c0000 | 00040000 | "FIP" | | mtd5 | 00040000 | 00040000 | "zloader" | | mtd6 | 04000000 | 00040000 | "ubi" | | mtd7 | 04000000 | 00040000 | "ubi2" | | mtd8 | 15a80000 | 00040000 | "zyubi" | The router boots BL2 which than loads FIP (u-boot). U-boot has hardcoded a command to always launch Zloader "mtd read zloader 0x46000000" and than "bootm". Bootargs are deactivated. Zloader is the zyxel booloader which allow to dual-boot ubi or ubi2, by default access to zloader is blocked. Too zloader checks that the firmware contains a particolar file called zyfwinfo. Additional details regarding Zloader can be found here: https://hack-gpon.github.io/zyxel/ https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914 Hardware -------- SOC: MediaTek MT7986a CPU: 4 core cortex-a53 (2000MHz) RAM: 1GB DDR4 FLASH: 512MB SPI-NAND (Micron xxx) WIFI: Wifi6 Mediatek MT7976 802.11ax 5 GHz 4x4 + 2.4GHZ 4x4 ETH: MediaTek MT7531 Switch + SoC 3 x builtin 1G phy (lan1, lan2, lan3) 1 x MaxLinear GPY211B 2.5 N-Base-T phy5 (lan4) 1 x MaxLinear GPY211B 2.5Gbit xor SFP/N-Base-T phy6 (wan) USB: 1 x USB 3.2 Enhanced SuperSpeed port UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC) VOIP: 2 FXS ports for analog phones MAC Address Table ----------------- eth0/lan Factory 0x002a eth1/wan Factory 0x0024 wifi 2.4Ghz Factory 0x0004 wifi 5Ghz Factory 0x0004 + 1 Serial console (UART) --------------------- +-------+-------+-------+-------+-------+ | +3.3V | RX | TX | KEY | GND | +---+---+-------+-------+-------+-------+ | +--- Don't connect Installation ------------ Keep in mind that openwrt can only run on the UBI partition, the openwrt firmware is not able to understand the zloader bootargs. The procedure allows restoring the UBI partition with the Zyxel firmware and retains all the OEM functionalities. 1. Unlock Zloader (this will allow to swap manually between partitions UBI and UBI2): - Attach a usb-ttl adapter to your computer and boot the router. - While the router is booting at some point you will read the following: `Please press Enter to activate this console.` - As soon as you read that press enter, type root and than press enter again (just do it, don't care about the logs scrolling). - Most likely the router is still printing the boot log, leave it boot until it stops. - If everything went ok you should have full root access "root@EX5601-T0:/#". - Type the following command and press enter: "fw_setenv EngDebugFlag 0x1". - Reboot the router. - As soon as you read `Hit any key to stop autoboot:` press Enter. - If everything went ok you should have the following prompt: "ZHAL>". - You have successfully unlocked zloader access, this procedure must be done only once. 2. Check the current active partition: - Boot the router and repeat the steps above to gain root access. - Type the following command to check the current active image: "cat /proc/cmdline". - If `rootubi=ubi` it means that the active partition is `mtd6` - If `rootubi=ubi2` it means that the active partition is `mtd7` - As mentioned earlier we need to flash openwrt into ubi/mtd6 and never overwrite ubi2/mtd7 to be able to fully roll-back. - To activate and boot from mtd7 (ubi2) enter into ZHAL> command prompt and type the following commands: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - After rebooting check again with "cat /proc/cmdline" that you are correctly booting from mtd7/ubi2 - If yes proceed with the installation guide. If not probably you don't have a firmware into ubi2 or you did something wrong. 3. Flashing: - Download the sysupgrade file for the router from openwrt, than we need to add the zyfwinfo file into the sysupgrade tar. Zloader only checks for the magic (which is a fixed value 'EXYZ') and the crc of the file itself (256bytes). I created a script to create a valid zyfwinfo file but you can use anything that does exactly the same: https://raw.githubusercontent.com/pameruoso/OpenWRT-Zyxel-EX5601-T0/main/gen_zyfwinfo.sh - Add the zyfwinfo file into the sysupgrade tar. - Enter via telnet or ssh into the router with admin credentials - Enter the following commands to disable the firmware and model checks "zycli fwidcheck off" and "zycli modelcheck off" - Open the router web interface and in the update firmware page select the "restore default settings option" - Select the sysupgrade file and click on upload. - The router will flash and reboot itself into openwrt from UBI 4. Restoring and going back to Zyxel firmware. - Use the ZHAL> command line to manually swap the boot parition to UBI2 with the following: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - You will boot again the Zyxel firmware you have into UBI2 and you can flash the zyxel firmware to overwrite the UBI partition and openwrt. Working features ---------------- 3 gbit lan ports Wifi Zyxel partitioning for coexistance with Zloader and dual boot. WAN SFP port (only after exporting pins 57 and 10. gpiobase411) leds reset button serial interface usb port lan ethernet 2.5 gbit port (autosense) wan ethernet 2.5 gbit port (autosense) Not working ---------------- voip (missing drivers or proper zyxel platform software) Swapping the wan ethernet/sfp xor port ---------------- The way to swap the wan port between sfp and ethernet is the following: export the pins 57 and 10. Pin 57 is used to probe if an sfp is present. If pin 57 value is 0 it means that an sfp is present into the cage (cat /sys/class/gpio/gpio468/value). If pin 57 value is 1 it means that no sfp is inserted into the cage. In conclusion by default both 57 an 10 pins are by default 1, which means that the active port is the ethernet one. After inserting an SFP pin 57 will become 0 and you have to manually change the value of pin 10 to 0 too. This is totally scriptable of course. Leds description ------------ All the leds are working out of the box but the leds managed by the 2 maxlinear phy (phy 5 lan, phy6 wan). To activate the phy5 led (rj45 ethernet port led on the back of the router) you have to use mdio-tools. To activate the phy6 led (led on the front of the router for 2.5gbit link) you have to use mdio-tools. Example: Set lan5 led to fast blink on 2500/1000, slow blink on 10/100: mdio mdio-bus mmd 5:30 raw 0x0001 0x33FC Set wan 2.5gbit led to constant on when wan is 2.5gbit: mdio mdio-bus mmd 6:30 raw 0x0001 0x0080 Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it>
* ath79: add support for D-Link DIR-859 A3Shiji Yang2023-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: QCA9563 775 MHz + QCA9880 Switch: QCA8337N-AL3C RAM: Winbond W9751G6KB-25 64 MiB Flash: Winbond W25Q128FVSG 16 MiB WLAN: Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3 LAN: LAN ports *4 WAN: WAN port *1 Buttons: reset *1 + wps *1 LEDs: ethernet *5, power, wlan, wps MAC Address: use address source1 source2 label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr lan 40:9b:xx:xx:xx:3c devdata@0x3f $label wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3 wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2 Install via Web UI: Apply factory image in the stock firmware's Web UI. Install via Emergency Room Mode: DIR-859 A1 will enter recovery mode when the system fails to boot or press reset button for about 10 seconds. First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1. Then we can open http://192.168.0.1 in the web browser to upload OpenWrt factory image or stock firmware. Some modern browsers may need to turn on compatibility mode. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: improve support for D-Link DIR-8x9 A1 seriesShiji Yang2023-05-22
| | | | | | | | | | | | | | 1. Remove unnecessary new lines in the dts. 2. Remove duplicate included file "gpio.h" in the device dts. 3. Add missing button labels "reset" and "wps". 4. Unify the format of the reg properties. 5. Add u-boot environment support. 6. Reduce spi clock frequency since the max value suggested by the chip datasheet is only 25 MHz. 7. Add seama header fixup for DIR-859 A1. Without this header fixup, u-boot checksum for kernel will fail after the first boot. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* uml: exclude some /arch/x86 optimizationsChristian Lamparter2023-05-22
| | | | | | | | | | | The x86_64 UML target wants to include SSSE3 optimized crypto code which lives under /arch/x86/crypto. However, these are not built and this causes an error. | ERROR: module '[...]/arch/x86/crypto/sha512-ssse3.ko' is missing. | make[3]: *** [modules/crypto.mk:990: [...]/kmod-crypto-sha512_5.15.112-1_x86_64.ipk] Error 1 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: brcm: drop brcmfmac patch waiting for register_wiphy()Rafał Miłecki2023-05-22
| | | | | | | | | | | | | | That was a workaround for OpenWrt generation of config files. This patch was used to postpone returning from probe function until loading firmware and calling register_wiphy(). All of that is not needed anymore thanks to the ieee80211 hotplug.d script introduced in the commit 5f8f8a366136 ("base-files, mac80211, broadcom-wl: wifi detection and configuration"). That takes care of generating /etc/config/wireless entries even if wireless device appears late in the booting process. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware: intel-microcode: update to 20230512Christian Lamparter2023-05-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian changelog: intel-microcode (3.20230512.1) unstable; urgency=medium * New upstream microcode datafile 20230512 (closes: #1036013) * Includes fixes or mitigations for an undisclosed security issue * New microcodes: sig 0x000906a4, pf_mask 0x40, 2022-10-12, rev 0x0004, size 115712 sig 0x000b06e0, pf_mask 0x01, 2022-12-19, rev 0x0010, size 134144 * Updated microcodes: sig 0x00050653, pf_mask 0x97, 2022-12-21, rev 0x1000171, size 36864 sig 0x00050654, pf_mask 0xb7, 2022-12-21, rev 0x2006f05, size 44032 sig 0x00050656, pf_mask 0xbf, 2022-12-21, rev 0x4003501, size 37888 sig 0x00050657, pf_mask 0xbf, 2022-12-21, rev 0x5003501, size 37888 sig 0x0005065b, pf_mask 0xbf, 2022-12-21, rev 0x7002601, size 29696 sig 0x000606a6, pf_mask 0x87, 2022-12-28, rev 0xd000390, size 296960 sig 0x000706e5, pf_mask 0x80, 2022-12-25, rev 0x00ba, size 113664 sig 0x000806a1, pf_mask 0x10, 2023-01-13, rev 0x0033, size 34816 sig 0x000806c1, pf_mask 0x80, 2022-12-28, rev 0x00aa, size 110592 sig 0x000806c2, pf_mask 0xc2, 2022-12-28, rev 0x002a, size 97280 sig 0x000806d1, pf_mask 0xc2, 2022-12-28, rev 0x0044, size 102400 sig 0x000806e9, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806e9, pf_mask 0x10, 2023-01-02, rev 0x00f2, size 105472 sig 0x000806ea, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806eb, pf_mask 0xd0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806ec, pf_mask 0x94, 2022-12-26, rev 0x00f6, size 105472 sig 0x000806f8, pf_mask 0x87, 2023-03-13, rev 0x2b000461, size 564224 sig 0x000806f7, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f6, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f5, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f4, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f8, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1, size 595968 sig 0x000806f6, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000806f5, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000806f4, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000906a3, pf_mask 0x80, 2023-02-14, rev 0x042a, size 218112 sig 0x000906a4, pf_mask 0x80, 2023-02-14, rev 0x042a sig 0x000906e9, pf_mask 0x2a, 2022-12-26, rev 0x00f2, size 108544 sig 0x000906ea, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448 sig 0x000906eb, pf_mask 0x02, 2022-12-26, rev 0x00f2, size 105472 sig 0x000906ec, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448 sig 0x000906ed, pf_mask 0x22, 2023-02-05, rev 0x00f8, size 104448 sig 0x000a0652, pf_mask 0x20, 2022-12-27, rev 0x00f6, size 96256 sig 0x000a0653, pf_mask 0x22, 2023-01-01, rev 0x00f6, size 97280 sig 0x000a0655, pf_mask 0x22, 2022-12-26, rev 0x00f6, size 96256 sig 0x000a0660, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 97280 sig 0x000a0661, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 96256 sig 0x000a0671, pf_mask 0x02, 2022-12-25, rev 0x0058, size 103424 sig 0x000b0671, pf_mask 0x32, 2023-02-06, rev 0x0113, size 207872 sig 0x000b06a2, pf_mask 0xc0, 2023-02-22, rev 0x4112, size 212992 sig 0x000b06a3, pf_mask 0xc0, 2023-02-22, rev 0x4112 * source: update symlinks to reflect id of the latest release, 20230512 -- Henrique de Moraes Holschuh <hmh@debian.org> Tue, 16 May 2023 00:13:02 -0300 intel-microcode (3.20230214.1) unstable; urgency=medium * Non-maintainer upload. * New upstream microcode datafile 20230214 - Includes Fixes for: (Closes: #1031334) - INTEL-SA-00700: CVE-2022-21216 - INTEL-SA-00730: CVE-2022-33972 - INTEL-SA-00738: CVE-2022-33196 - INTEL-SA-00767: CVE-2022-38090 * New Microcodes: sig 0x000806f4, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f4, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f5, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f5, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f6, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f6, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f7, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170, size 600064 sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181, size 561152 sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e, size 212992 sig 0x000b06a3, pf_mask 0xc0, 2022-12-08, rev 0x410e * Updated Microcodes: sig 0x00050653, pf_mask 0x97, 2022-08-30, rev 0x1000161, size 36864 sig 0x00050656, pf_mask 0xbf, 2022-08-26, rev 0x4003303, size 37888 sig 0x00050657, pf_mask 0xbf, 2022-08-26, rev 0x5003303, size 37888 sig 0x0005065b, pf_mask 0xbf, 2022-08-26, rev 0x7002503, size 29696 sig 0x000606a6, pf_mask 0x87, 2022-10-09, rev 0xd000389, size 296960 sig 0x000606c1, pf_mask 0x10, 2022-09-23, rev 0x1000211, size 289792 sig 0x000706a1, pf_mask 0x01, 2022-09-16, rev 0x003e, size 75776 sig 0x000706a8, pf_mask 0x01, 2022-09-20, rev 0x0022, size 76800 sig 0x000706e5, pf_mask 0x80, 2022-08-31, rev 0x00b8, size 113664 sig 0x000806a1, pf_mask 0x10, 2022-09-07, rev 0x0032, size 34816 sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c, size 219136 sig 0x00090675, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429 sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429, size 218112 sig 0x000906a4, pf_mask 0x80, 2023-01-11, rev 0x0429 sig 0x000906c0, pf_mask 0x01, 2022-09-02, rev 0x24000024, size 20480 sig 0x000a0671, pf_mask 0x02, 2022-08-31, rev 0x0057, size 103424 sig 0x000b0671, pf_mask 0x32, 2022-12-19, rev 0x0112, size 207872 sig 0x000b06f2, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x000b06f5, pf_mask 0x07, 2023-01-04, rev 0x002c -- Tobias Frost <tobi@debian.org> Sun, 12 Mar 2023 18:16:50 +0100 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: disable IGD (video DRM) supportPhilip Prindeville2023-05-21
| | | | | | | | | | | | | IGD is only useful when accelerating a VM guest that wants to direct render to memory in the host's framebuffer, but since OpenWrt typically runs on headless hardware, this serves no purpose. Also build vfio with VFIO_NOIOMMU undefined (to get all of the code enabled), but allow it to be enabled via boot-time modparams settings (or at run-time via sysfs writes to "/sys/module/vfio/parameters/enable_unsafe_noiommu_mode". Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* dropbear: add ForceCommand uci optionNozomi Miyamori2023-05-20
| | | | | | | | adds ForceCommand option. If the command is specified, it forces users to execute the command when they log in. Signed-off-by: Nozomi Miyamori <inspc43313@yahoo.co.jp> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* tfa-layerscape: fix fiptool's buildChristian Lamparter2023-05-20
| | | | | | | | | | | | | | | | | | | | | | | | A missing '\' caused the remaining parameters not to be passed to make. This fixes the following error: | gcc -c [...] fiptool.c -o fiptool.o | In file included from fiptool.h:16, | from fiptool.c:19: |fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory | 19 | # include <openssl/sha.h> | | ^~~~~~~~~~~~~~~ |compilation terminated. |make[3]: *** [Makefile:58: fiptool.o] Error 1 as the HOST_CFLAGS are no longer passed. then, HOST_CFLAGS is specified as a command argument, this is a specific problem of our built since appending these needs the override directive. Fixes: df28bfe03247 ("tfa-layerscape: Change to github and use the latest tag") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* nettle: update to 3.9Nick Hainke2023-05-20
| | | | | | | | | | Changelog: https://git.lysator.liu.se/nettle/nettle/-/blob/26cd0222fd09b8f5dc0edba30d6908722c7e9b09/NEWS Refresh patch: - 100-portability.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* tfa-layerscape: Change to github and use the latest tagWojciech Dubowik2023-05-20
| | | | | | | | | | | | | | The default location of tfa-layerscape has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. v2: * restored ls1021a-afrdm board * added platform defines to fiptool so ls-ddr-phy can be built Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-20
| | | | | | | | | | | | | The default location of ppfe-firmware has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* fman-ucode: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-20
| | | | | | | | | | | | | The default location of fman-ucode has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP LS1046A-RDB Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-20
| | | | | | | | | | | | | | | | | The default location of uboot-layerscape has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1028A-RDB * NXP LS1046A-RDB V2: Remove ls1028ardb specifix fixups not needed with new uboot Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-20
| | | | | | | | | | | | | | | | The default location of ls-rcw has been changed from codeuaurora to github. The reason is that the old codeaurora source no longer resolves. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1046A-RDB Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE, Mention that previous codeaurora source is no longer available) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: net: add support for kernel tlsTiago Gaspar2023-05-20
| | | | | | | | | | Add ktls (Kernel TLS) kmods to enable TLS support in kernel (allowing TLS offload when the network card supports it) Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com> (added disabled symbols) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* pcre2: switch to Github Releases and bump to 10.42Linhui Liu2023-05-20
| | | | | | | | | The mirror at SourceForge is an unofficial mirror and no longer maintained. ChangeLogs: https://github.com/PCRE2Project/pcre2/blob/pcre2-10.42/ChangeLog Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* util-linux: Use SYS_getrandom in randutils.cHauke Mehrtens2023-05-19
| | | | | | | | | | | The getrandom syscall is not hanging at bootup any more if there is not enough entropy. This was fixed upstream in 2018 in commit: https://github.com/util-linux/util-linux/commit/a9cf659e0508c1f56813a7d74c64f67bbc962538 This OpenWrt patch is not needed any more. This reverts commit e64463ebde55 ("util-linux: avoid using the getrandom syscall") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Fix taskset conflict with busyboxHauke Mehrtens2023-05-19
| | | | | | | | | | This fixes the following error: * check_data_file_clashes: Package taskset wants to install file build_dir/target-powerpc_8548_musl/root-mpc85xx/usr/bin/taskset But that file is already provided by package * busybox * opkg_install_cmd: Cannot install package taskset. Fixes: 3c3d797c4dad ("busybox: enable taskset by default") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libjson-c: import patch to fix compilation on macosNick Hainke2023-05-19
| | | | | | | | | | | | | | Fixes errors in the form of: /Users/user/src/openwrt/openwrt/build_dir/hostpkg/json-c-0.16/json_util.c:63:35: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes] const char *json_util_get_last_err() ^ void 1 error generated. ninja: build stopped: subcommand failed. Reported-by: Paul Spooren <mail@aparcar.org> Suggested-by: Paul Spooren <mail@aparcar.org> Signed-off-by: Nick Hainke <vincent@systemli.org>
* f2fs-tools: update to 1.16.0Nick Hainke2023-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove upstramed patches: - 100-configure.ac-fix-AC_ARG_WITH.patch - 101-configure.ac-fix-cross-compilation.patch Remove deprecated f2fstat tool: https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=77bf7ed29f1dd1341079913f3b36fc62f812c4f5 Changelog: 06c027a f2fs-tools: upgrade version 1.16.0 542cc57 fsck.f2fs: fix sanity check logic for cp_payload a7df89e mkfs.f2fs: remove indentation c82985a fsck.f2fs: don't call report_zone on normal partition 0ac168e f2fs-tools: relax zone size of power of 2 641be32 mkfs.f2fs: trim all the devices except the first one 3835fef f2fs-tools: fix # of total segments 5b08ca9 f2fs_io: support AES_256_HCTR2 ae3301c f2fs_io: Fix out of tree builds ddbde27 fsck.f2fs: relocate chksum verification step during f2fs_do_mount() 77bf7ed f2fs-tools: Remove deprecated f2fstat fb6575e Remove sg_write_buffer 1bb669e fsck.f2fs: avoid uncessary recalculation ccd2361 fsck.f2fs: fix potential overflow of copying i_name cd6b133 fsck.f2fs: add parentheses for SB_MASK 399600a dump.f2fs: remove unavailable option -g 3e6e178 f2fs-tools: define HAVE_CLOCK_GETTIME properly 907b972 f2fs-tools: support F2FS_IOC_START_ATOMIC_REPLACE 9ff70fb f2fs-tools: give less overprovisioning space 844f821 f2fs-tools: set host-aware zoned device similar to host-managed one 88ac76d fsck.f2fs: fix missing to assign c.zoned_model 8cbe34e fsck.f2fs: trigger repairing if filesystem has inconsistent errors 2f1dde2 fsck.f2fs: trigger repairing if filesystem was forced to stop 465159f fsck.f2fs: export valid image size 3486b62 mkfs.f2fs: update allocation policy for ro feature bdd51e5 fsck.f2fs: fix __end_block_addr() 5a5e419 Always use sparse/sparse.h when building for Android 19f77c6 f2fs-tools: fix build error on lz4-1.9.4 986c1f1 Fix format strings in log messages 0d6acbe fsck.f2fs: use elapsed_time in checkpoint for period check 9b7a4c5 mkfs.f2fs: catch total_zones=0 instead of crashing 6148db3 f2fs-tools: use F2FS_BLKSIZE instead of PAGE_*_SIZE f09c2b7 f2fs_io: support triggering filesystem GC via ioctl 32e7d27 configure.ac: fix cross compilation 65fe94e configure.ac: fix AC_ARG_WITH 6325cf7 Use F2FS_BLKSIZE as the size of struct f2fs_summary_block c89be7a Use F2FS_BLKSIZE for dev_read_block() buffers 5317d18 Improve compile-time type checking for f2fs_report_zone() 92e2e52 Fix f2fs_report_zone() 648a491 Fix the struct f2fs_dentry_block definition c964547 resize.f2fs: add option to manually specify new overprovision a741438 fsck.f2fs: drop compression bit if inline_data is set 406b1c9 f2fs-tools: fix cannot get bdev information 9d0cb9e f2fs_io: add dsync option for write a7b8b46 tools: fix file too large causing overflow bddca6f dump.f2fs: add -I nid to dump inode by scan full disk ebc3879 android_config: add time headers c1144bf Check fallthrough in mount.h for Mac bcb9929 avoid unnecessary function 7d902f4 Fix dependencies on linux/blkzoned.h when using Bionic. 274abbb Remove unnecessary config.h 8c97ab3 libzone: remove duplicate header adcec10 Support zoned device if libc exists efc2bc7 mkfs.f2fs: fix typo 3034a41 mkfs.f2fs: split unused parameter dd8d8e5 f2fs-tools: do not use SG_IO in Android 4f216e6 f2fs-tools: move android_config before defining them 48c5dbb f2fscrypt: adjust config file first 4b55459 android_config: add missing uuid library Signed-off-by: Nick Hainke <vincent@systemli.org>
* util-linux: Fix build on powerpc and arcHauke Mehrtens2023-05-19
| | | | | | | | | This fixes the build of util-linux on powerpc and arc. Both CPU architectures were not supported here in addition to the missing MIPS support. Fixes: 628a410ed149 ("util-linux: update to 2.39") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: other: adjust paths for new locationJohn Audia2023-05-18
| | | | | | | | | This upstream commit[1] moves drivers/bus/mhi/core/ to drivers/bus/mhi/host/ so we need to correct for that here. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.112&id=9fbf10148f31a63b6d8c2b0e56cb97eb173d600b Signed-off-by: John Audia <therealgraysky@proton.me>
Powered by cgit, Themed by Ted Yin.