aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
* mac80211: build each variant in its own dirEneas U de Queiroz2024-02-23
| | | | | | | | | | | | | | | | | | Having different build directories is the default when the package Makefile defines more than one variant. Mac80211 overrides PKG_BUILD_DIR, not taking different variants in consideration, which causes clobbering the directories when both variants are built. When compiled with AUTOREMOVE=y, the effect is that the package is unnecessarily rebuilt when the package is compiled again. Wihout AUTOREMOVE, the problem is worse: the second variant will not be rebuilt, and you end up with the smallbuffers variant being a copy of the regular one. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* qualcommax: ipq807x: add support for Linksys MX5300Paweł Owoc2024-02-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: ======== SoC: Qualcomm IPQ8072A Flash: 512MB (Winbond W29N04GZBIBA) RAM: 1GB (2x Nanya DDR3L NT5CC256M16ER-EK) Ethernet: 5x 10/100/1000Mbps (Qualcomm QCA8075) WiFi1: 5GHz ac 4x4 (Qualcomm QCA9984 + Skyworks SKY85746-11) - channels 100-169 WiFi2: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64 WiFi3: 2.4GHz ax 4x4 (Qualcomm QCN5024 + Skyworks SKY8340-11) IoT: Bluetooth 5, Zigbee and Thread (Qualcomm QCA4024 + Skyworks SE2433T-R) IoT Flash: 4MB (Macronix MX25R3235F) RTC: ST M41T00S LED: 1x RGB status (NXP PCA9633) USB: 1x USB 3.0 Button: WPS, Reset Flash instructions: ======== 1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin image. More details can be found here: https://www.linksys.com/hk/support-article?articleNum=274497 After first boot check actual partition: - fw_printenv -n boot_part and install firmware on second partition using command in case of 2: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel and in case of 1: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 2. Installation using serial connection from OEM firmware (default login: root, password: admin): - fw_printenv -n boot_part In case of 2: - flash_erase /dev/mtd21 0 0 nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin or in case of 1: - flash_erase /dev/mtd23 0 0 nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin After first boot install firmware on second partition: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel or: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 3. Installation from initramfs image using USB FAT32 formatted drive: Stop u-boot and run: - usb start && fatload usb 0:1 $loadaddr openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb && bootm $loadaddr Write firmware to the flash from initramfs: - mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel and: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 4. Back to the OEM firmware: - mtd -e kernel -n write FW_MX5300_1.1.9.200251_prod.img kernel and: - mtd -r -e alt_kernel -n write FW_MX5300_1.1.9.200251_prod.img alt_kernel 5. USB recovery: - fw_setenv usbimage 'openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb' fw_setenv bootusb 'usb start && fatload usb 0:1 $loadaddr $usbimage && bootm $loadaddr' fw_setenv bootcmd 'run bootusb; aq_load_fw && if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi' Notes: ======== IoT device is accesible over spi. Not yet supported. Signed-off-by: Paweł Owoc <frut3k7@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* base-files: sysupgrade: rename add_*files() functionsRafał Miłecki2024-02-22
| | | | | | | | | | | | Usage of word "add" was somehow misleading in those functions: 1. They don't really add (as in: append) anything. Result files are created from scratch. 2. It wasn't clear what adding files means. It could be understood as adding actual files somewhere (to existing archive?). Also the word "add" was also a bit ambiguous. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: sysupgrade: s/do_save_conffiles/create_backup_archive/Rafał Miłecki2024-02-22
| | | | | | | | Rename function to more accurate and self-explanatory name: 1. Use "archive" in name as this functions creates tar archive 2. Avoid "conffiles" as this function may archive more than that Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: sysupgrade: exit with no error for --helpRafał Miłecki2024-02-22
| | | | | | | Calling "sysupgrade --help" should result in printing help and exiting with 0 code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: sysupgrade: group & cleanup global variablesRafał Miłecki2024-02-22
| | | | | | Group & describe them by type, drop unneeded exports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: sysupgrade: replace UMOUNT_ETCBACKUP_DIR with a local variableRafał Miłecki2024-02-22
| | | | | | It was used inside do_save_conffiles() only. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: sysupgrade: fix error message and typoLuiz Angelo Daros de Luca2024-02-22
| | | | | | Some minor error message and comment fixes. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* Revert "base-files: sysupgrade: always setup overlay when creating backup"Rafał Miłecki2024-02-22
| | | | | | | | | | | | | | | | | | | | | | | This reverts commit 4fa9aaf0bed984d200b3c48d1cc81fca7847c394. That seemed like a good idea allowing us to include any runtime generated file in archive. Unfortuantely it broke backups with files from mounted directories. When mounting overlay with / as lowerdir its mounts don't propagete in the mountpoint. That resulted in empty directories: /tmp/overlay.XXXXXX/backup/tmp/ /tmp/overlay.XXXXXX/backup/var/ /tmp/overlay.XXXXXX/backup/dev/ /tmp/overlay.XXXXXX/backup/proc/ etc. As some platforms / users try to backup files like /var/dhcp.leases or /boot/cmdline.txt it means we can't use that solution. Link: http://lists.openwrt.org/pipermail/openwrt-devel/2024-February/042320.html Link: https://lore.kernel.org/linux-fsdevel/67bb0571-a6e0-44ea-9ab6-91c267d0642f@gmail.com/T/#u Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "base-files: sysupgrade: include uci-defaults script disabling services"Rafał Miłecki2024-02-22
| | | | | | | | | This reverts commit bf304d10e97c11de8c637fda02578cce79a3a0b4. That uci-defaults script worked great but generating it required mounting root dir as overlay lowerdir that needs to be reverted. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* wifi-scripts: Support HE Iftypes with multiple entriesHauke Mehrtens2024-02-22
| | | | | | | | | With mac80211_hwsim I have seen such entries in OpenWrt 22.03: HE Iftypes: managed, AP The mac80211.sh script did not detect the entry and failed. Allow arbitrary other entries before to fix this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: rework network interface ignoreYegor Yefremov2024-02-22
| | | | | | | | | | | | | In some situations (slow protocol or interfaces with auto 0), the interfaces are not available during the dnsmasq initialization and hence, the ignore setting will be skipped. Install an interface trigger for ignored interfaces in case their ifname cannot be resolved. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to Git HEAD (2024-02-21)Jo-Philipp Wich2024-02-22
| | | | | | | | | ee4af9b55cb4 vm: rework object iteration a275399dd8e2 uci: refactor uci.changes() to match documentation ba3855ae3775 lib: fix documentation typo for `pop()` function Fixes: https://github.com/jow-/ucode/issues/188 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* qualcommax: ipq60xx: Add 8devices Mango DVKMantas Pucka2024-02-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8devices Mango DVK is a single board computer / devkit for 8devices Mango system-on-module (SoM). Specifications: * CPU: Qualcomm IPQ6010 Quad core Cortex-A53 1.8GHz * RAM: 512 MB * Storage: * 32 MB serial NOR flash (on SoM) * 256 MB parallel NAND flash (on DVK) * Ethernet: * 2x1G RJ45 ports(QCA8072 or QCA8075) * 1x2.5G RJ45 port (QCA8081) * 1xSFP (shares SGMII with QCA8081) * Switch: Qualcomm Atheros IPQ6010 * WLAN: * 2.4GHz: QCN5121 2x2 802.11b/g/n/ax 574 Mbps PHY rate * 5GHz: QCN5152 2x2 802.11a/n/ac/ax 1201 Mbps PHY rate * USB: * 1x USB3.0 Type-A port * 1x USB2.0 available at mini PCIe slot * PCIe: 1x mini PCIe slot 1xLane Gen3 (8GT/s) * SD/eMMC (on a single shared bus - only one can be active): * micro SD slot * eMMC module connector * LEDs: * Green power led (not controllable) * Green 2.4GHz radio led (GPIO 67) * Green 5GHz radio led (GPIO 66) * Buttons: * 1x (WPS GPIO79) button * GPIOs: 2.54mm header brings out 18 GPIOs (1.8V level) * UART: 4-pin UART header (3.3V level) * 115200 8N1, 3.3V-Tx-Rx-GND (3.3V is pin 1 close to boot-switch SW2) * Power: * PoE IN on 2.5G port (passive 24-48V) * DC power terminal (12-58V) Installation instructions: Vendor image format is compatible with squashfs-sysupgrade image. Run: sysupgrade -n -F openwrt-qualcommax-ipq60xx-8devices_mango-dvk-squashfs-sysupgrade.bin Signed-off-by: Mantas Pucka <mantas@8devices.com>
* ipq-wifi: add support for 8devices Mango boardMantas Pucka2024-02-21
| | | | | | Add support for .ipq6018 BDF suffix and add Mango board entry Signed-off-by: Mantas Pucka <mantas@8devices.com>
* ipq-wifi: update to Git HEAD (2024-02-19)Mantas Pucka2024-02-21
| | | | | | | 1cc59e1 ipq6018: add 8devices Mango BDF 10279cc ipq40xx:Add support for Netgear LBR20 with two BDF's Signed-off-by: Mantas Pucka <mantas@8devices.com>
* ath11k-firmware: add wifi firmware for ipq6018Mantas Pucka2024-02-21
| | | | | | | So far only stable FW is v2.4. It exists in a different git repo, so add custom download routine. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* mac80211: ath11k: disable coldboot for ipq6018Mantas Pucka2024-02-21
| | | | | | | Coldboot calibration does not work at the moment and causes failure during wifi startup. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* qca-ssdk: support selecting PCS channel for PORT3 on IPQ6018Mantas Pucka2024-02-21
| | | | | | | | | | | | | | | When QCA8072 is used in PSGMII mode with IPQ6018, PCS used for second PHY port would overlap with one used by SGMII+ port. SoC has register to select different PCS in such case. Original code used PHY_ID for this decision, which also had other issues, but is no longer viable since we moved to upstream QCA807x driver. Introduce DT property port3_pcs_channel to allow describing this in DT. Default value is <2>, and for some QCA8072 designs <4> would be needed. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* mac80211: add a fix for racy drv_sta_rc_update callsFelix Fietkau2024-02-21
| | | | | | Fixes potential crash issues in mt76 and other drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-rockchip: add Radxa CM3 IO board supportMarius Durbaca2024-02-21
| | | | | | | Add support for the Radxa CM3 IO board. Reviewed-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
* rkbin: add rk3566 atf/tpl blobsMarius Durbaca2024-02-21
| | | | | | | Currently there are no atf/tpl blobs for rk3566 SoCs so this commit adds the prebuilt firmware from the vendor. Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
* mac80211: add AQL support for broadcast/multicast packetsFelix Fietkau2024-02-21
| | | | | | Should improve performance/reliability with lots of mcast packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to 6.6.15Robert Marko2024-02-21
| | | | | | | Update backports to the latest 6.6 point release. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rockchip: add NanoPi R4S Enterprise Edition buildTianling Shen2024-02-19
| | | | | | | | | | | FriendlyElec renamed the NanoPi R4S board with EEPROM (mac address) to "enterprise" edition, and it was added as a "new" board in upstream kernel. This patch switched to use that upstreamed dts and removed local EEPROM patch. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-rockchip: add NanoPi R2C Plus supportTianling Shen2024-02-19
| | | | | | Add support for the FriendlyARM NanoPi R2C Plus. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* base-files: sysupgrade: include uci-defaults script disabling servicesRafał Miłecki2024-02-19
| | | | | | | | | | | | | | Disabled services should be kept disabled after sysupgrade. This can be easily handled using a proper uci-defaults script. Extend sysupgrade to check for disabled services, generate uci-defaults script disabling them and include it in backup. Cc: Christian Marangi <ansuelsmth@gmail.com> Cc: Jo-Philipp Wich <jo@mein.io> Cc: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Jo-Philipp Wich <jo@mein.io>
* base-files: sysupgrade: always setup overlay when creating backupRafał Miłecki2024-02-19
| | | | | | | | | | | | | | | | | | | | Setting overlay while creating backup allows including extra files in archive without actually writing them to flash. Right now this feature is limited to /etc/backup/ directory and is used only for including installed_packages.txt. Extend this solution to make it more generic: 1. Always mount overlay while creating backup 2. Overlay whole / to don't limit it to /etc/backup/ This allows including any additional files in backups and adding more sysupgrade features. Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com> Cc: Christian Marangi <ansuelsmth@gmail.com> Cc: Jo-Philipp Wich <jo@mein.io> Cc: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: sysupgrade: always cleanup after backupsLuiz Angelo Daros de Luca2024-02-19
| | | | | | | | | | When tar was failing, it was exiting immediately. Some files and the tmpfs mount (-k) would remain breaking the next backup attempt. Also remove redundant $? from exit builtin call as exit already returns the last command exit code when called. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* base-files: sysupgrade: do not hide tar errorsLuiz Angelo Daros de Luca2024-02-19
| | | | | | | | | | | | | | | tar stderr was probably discarded only to remove this message: tar: removing leading '/' from member names However, together with that, any other error would also be discarded. It is easier to fix that allowing the error message to be printed. In sysupgrade, the backup file list only uses absolute paths. That way, the solution is to remove the leading '/' from all files (sed) and chdir to / (option -C /) Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* linux-firmware: intel: add BE200 wifi firmwareJanusz Dziedzic2024-02-18
| | | | | | | Add option to install Intel BE200 firmware required by iwlwifi driver and Wifi7 hardware. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
* ca-certificates: update to version 20240203Seo Suchan2024-02-18
| | | | | | Update Mozilla certificate authority bundle to version 2.64 Signed-off-by: Seo Suchan <tjtncks@gmail.com>
* wifi-scripts: fix FILS AKM selection with EAP-192Eneas U de Queiroz2024-02-17
| | | | | | Fix netifd hostapd.sh selection of FILS-SHA384 algorithm with eap-192. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* lua5.3: backport CVE fixRosen Penev2024-02-17
| | | | | | Also refreshed some patches Signed-off-by: Rosen Penev <rosenp@gmail.com>
* lua: fix CVE-2014-5461Rosen Penev2024-02-17
| | | | | | | | Patch taken from Debian. Refresh patches Signed-off-by: Rosen Penev <rosenp@gmail.com>
* uboot-mediatek: bpi-r3-mini: fix typo in bootmenuDaniel Golle2024-02-16
| | | | | | | Fix typo in eMMC bootmenu. Fixes: bc25519f98 ("uboot-mediatek: add builds for BananaPi BPi-R3 mini") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: bpi-r3-mini: fix NAND flash layoutDaniel Golle2024-02-16
| | | | | | | | Fix NAND flash layout which was out-of-sync with the definition in ARM TrustedFirmware-A which expects UBI to start at 0x200000. Fixes: b03d3644cf ("mediatek: filogic: add BananaPi BPi-R3 mini") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: add BananaPi BPi-R3 miniDaniel Golle2024-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification ---------------------- SoC: MediaTek MT7986A 4x A53 Flash: 128MB SPI-NAND, 8GB eMMC RAM: 2GB DDR4 Ethernet: 2x 2.5GbE (Airoha EN8811H) WiFi: MediaTek MT7976C 2x2 2.4G + 3x3 5G Interfaces: * M.2 Key-M: PCIe 2.0 x2 for NVMe SSD * M.2 Key-B: USB 3.0 with SIM slot * front USB 2.0 port LED: Power, Status, WLAN2G, WLAN5G, LTE, SSD Button: Reset, internal boot switch Fan: PWM-controlled 5V fan Power: 12V Type-C PD Installation instructions for eMMC ---------------------------------- 0. Set boot switch to boot from SPI-NAND (assuming stock rom or immortalwrt running there). 1. Write GPT partition table to eMMC Move openwrt-mediatek-filogic-bananapi_bpi-r3-mini-emmc-gpt.bin to the device /tmp using scp and write it to /dev/mmcblk0: dd if=/tmp/openwrt-*-r3-mini-emmc-gpt.bin of=/dev/mmcblk0 2. Reboot (to reload partition table) 3. Write bootloader and OpenWrt images Move files to the device /tmp using scp: - openwrt-*-bananapi_bpi-r3-mini-emmc-preloader.bin - openwrt-*-bananapi_bpi-r3-mini-emmc-bl31-uboot.fip - openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb - openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb Write them to the appropriate partitions: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-emmc-preloader.bin of=/dev/mmcblk0boot0 dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-emmc-bl31-uboot.fip of=/dev/mmcblk0p3 dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb of=/dev/mmcblk0p4 dd if=/tmp/openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb of=/dev/mmcblk0p5 sync 4. Remove the device from power, set boot switch to eMMC and boot into OpenWrt. The device will come up with IP 192.168.1.1 and assume the Ethernet port closer to the USB-C power connector as LAN port. 5. If you like to have Ethernet support inside U-Boot (eg. to boot via TFTP) you also need to write the PHY firmware to /dev/mmcblk0boot1: echo 0 > /sys/block/mmcblk0boot1/force_ro dd if=/lib/firmware/airoha/EthMD32.dm.bin of=/dev/mmcblk0boot1 dd if=/lib/firmware/airoha/EthMD32.DSP.bin bs=16384 seek=1 of=/dev/mmcblk0boot1 Installation instructions for NAND ---------------------------------- 0. Set boot switch to boot from eMMC (assuming OpenWrt is installed there by instructions above. Using stock rom or immortalwrt does NOT work!) 1. Write things to NAND Move files to the device /tmp using scp: - openwrt-*-bananapi_bpi-r3-mini-snand-preloader.bin - openwrt-*-bananapi_bpi-r3-mini-snand-bl31-uboot.fip - openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb - openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb Write them to the appropriate locations: mtd write /tmp/openwrt-*-bananapi_bpi-r3-mini-snand-preloader.bin /dev/mtd0 ubidetach -m 1 ubiformat /dev/mtd1 ubiattach -m 1 volsize=$(wc -c < /tmp/openwrt-*-bananapi_bpi-r3-mini-snand-bl31-uboot.fip) ubimkvol /dev/ubi0 -N fip -n 0 -s $volsize -t static ubiupdatevol /dev/ubi0_0 /tmp/openwrt-*-bananapi_bpi-r3-mini-snand-bl31-uboot.fip cd /lib/firmware/airoha cat EthMD32.dm.bin EthMD32.DSP.bin > /tmp/en8811h-fw.bin ubimkvol /dev/ubi0 -N en8811h-firmware -n 1 -s 147456 -t static ubiupdatevol /dev/ubi0_1 /tmp/en8811h-fw.bin ubimkvol /dev/ubi0 -n 2 -N ubootenv -s 126976 ubimkvol /dev/ubi0 -n 3 -N ubootenv2 -s 126976 volsize=$(wc -c < /tmp/openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb) ubimkvol /dev/ubi0 -n 4 -N recovery -s $volsize ubiupdatevol /dev/ubi0_4 /tmp/openwrt-*-bananapi_bpi-r3-mini-initramfs-recovery.itb volsize=$(wc -c < /tmp/openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb) ubimkvol /dev/ubi0 -n 4 -N recovery -s $volsize ubiupdatevol /dev/ubi0_4 /tmp/openwrt-*-bananapi_bpi-r3-mini-squashfs-sysupgrade.itb 3. Remove the device from power, set boot switch to NAND, power up and boot into OpenWrt. Partially based on immortalwrt support for the R3 mini, big thanks for doing the ground work! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add driver for Airoha EN8811H PHY as moduleDaniel Golle2024-02-15
| | | | | | | | Add PHY driver for Airoha EN8811H PHY and package it as kernel module. The PHY needs to load firmware from rootfs, so there is no point in having the driver built-into the kernel. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add builds for BananaPi BPi-R3 miniDaniel Golle2024-02-15
| | | | | | | | The R3 mini comes with two Airoha EN8811H PHYs for 2.5G Ethernet. The driver added to U-Boot expects the firmware for the PHY to be stored inside UBI volume en8811h-fw or MMC boot1 hardware partition. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* linux-firmware: package firmware for Airoha EN8811H PHYDaniel Golle2024-02-15
| | | | | | | Add package with firmware for Airoha EN8811H 2.5G Ethernet PHY which needs to be loaded via MDIO before the PHY can be used. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firmware: package firmware for built-in 2.5G PHY on MT7988Daniel Golle2024-02-15
| | | | | | | | Firmware for the built-in 2.5G Ethernet PHY of the MediaTek MT7988 SoC is now part of linux-firmware, so we can package it. Only a single file is needed with recent driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: modernize Linksys E8450 / Belkin RT3200 UBI buildDaniel Golle2024-02-15
| | | | | | | | | | | | | | | | | Move fip and factory into UBI static volumes. Use fitblk instead of partition parser. !! RUN INSTALLER FIRST !! Existing users of previous OpenWrt releases or snapshot builds will have to **re-run the updated installer** before upgrading to firmware after this commit. DO NOT flash or run even just the initramfs image unless you have run the updated installer which moves the content of the 'factory' partition into a UBI volume. tl;dr: DON'T USE YET! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: convert unifi6lr-v{1,2,3}-ubootmod to fitblkDaniel Golle2024-02-15
| | | | | | No bootloader changes needed in this case, smooth transition. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: convert BPi-R64 to all-UBI layout and fitblkDaniel Golle2024-02-15
| | | | | | | Modernize bootloader and flash memory layout of the BPi-R64 similar to how it has also been done for the BPi-R3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: add UBI-enabled builds for MT7622Daniel Golle2024-02-15
| | | | | | | Use custom UBI start address 0x80000 on MT7622 which is more than enough for a single bl2 (MT7622 BootROM doesn't support redundant bl2). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: mediatek_filogic: update bpi-r3Daniel Golle2024-02-15
| | | | | | Unify env configuration now that BPi-R4 and BPi-R3 both use fitblk. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r3: all-UBI NAND layout, use fitblkDaniel Golle2024-02-15
| | | | | | | | | | Modernize U-Boot to provide a better reference: * store fip image in UBI now that TF-A supports that * switch from uImage.FIT partition parser to new fitblk virtual firmware block driver (root=/dev/fit0) * automatically set root device according to boot_mode register Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: add mt7986-spim-nand-ubi-ddr4Daniel Golle2024-02-15
| | | | | | | Add UBI-enabled build for MT7986 with SPIM-NAND and DDR4 for use with the BananaPi R3 board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: filogic: add support for BananaPi R4Daniel Golle2024-02-15
| | | | | | | | Add environment settings for the BananaPi BPI-R4 router board which can boot from (and store its bootloader environment on) micro SD card, SPI-NAND and eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Powered by cgit, Themed by Ted Yin.