aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
* mwlwifi: update to version 10.4.10-20231120Michael Trinidad2023-11-25
| | | | | | | | | | | | | | | | | | | | | | | | | Upstream PR 416 improvements: -AMPDU Optimization of priority calculation. (8864/8897) -8864/8897 fix wpa3 -Add cypher suite to driver capabilities (all chip) -Alignment of pcie_tx_ctrl* (all chip) -"feature" normalization for all chips (all chip) -Add modprobe parameters (all chip) -fix monitoring (all chip) -Code separation by chipset (8864/8897 <=> 8997) -dump_prob decommissioning (8864/8897/8997) -fix amsdu high ping latency (8864/8897/8997) -drop debug info in hostcmd_get_hw_spec() (8864/8897) -Add wcb_base in debug info (8864) -Rewrite AMSDU packets (8864/8897/8997) -debug rewrite output mwl_debugfs_sta_read (all chip) -Improved encryption interoperability (8864/8897/8997) -factorization encrypted packet test (8864/8897/8997) -Change 88W8864 firmware to 7.2.9.27 (8864/8897) -Fix the AMPDU session lifecycle (8864/8897/8997) -Remove the tx done packets mechanism (8864/8897) Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
* uboot-envtools: add support for Zyxel EX5601-T0 ubootmodNicolò Veronese2023-11-25
| | | | | | | | The ubootmod bootlaoder for EX5601-T0 uses two partitions in ubi to store enviroment variables. so proper config is needed. Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
* uboot-mediatek: add initial Zyxel EX5601-T0 supportValerio 'ftp21' Mancini2023-11-25
| | | | | | | | | | | | | | | | | | | | | | | Flash procedure is described in next commit. TLDR: Copy preloader and uboot to /tmp and write them in the mtd. This will also require new UBI partition and volumes to boot openwrt. mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2 mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip Changelist: - Added profile for 4k+256 SPI NAND_TYPE - Added basic Zyxel EX5601-T0 uboot profile Backported from hitech95 branch: - Button RESET pin fix - Button WPS pin fix Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu> Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
* linux-firmware: intel: add firmware for AX101Jitao Lu2023-11-25
| | | | | | | iwlwifi from 6.5 supports API version up to 83, but 81 is the latest one available from linux-firmware 20230804. Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
* mediatek: add support for Zbtlink ZBT-Z8102AXDaniel Golle2023-11-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SoC: MediaTek MT7981B RAM: 1024MiB Flash: SPI-NAND 128 MiB Switch: 1 WAN, 4 LAN (Gigabit) USB: two M.2 slots for 5G modems via USB 3.0 hub, external USB 3.0 port Buttons: Reset, Mesh Power: DC 12V 1A WiFi: MT7976CN UART: 115200n8 UART Layout: VCC-RX-TX-GND Installation: A. Through OpenWrt Dashboard: If your router comes with OpenWrt preinstalled (modified by the seller), you can easily upgrade by going to the dashboard (192.168.1.1) and then navigate to System -> Backup/Flash firmware, then flash the firmware B. Through TFTP Standard installation via UART: 1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin). 2. Power on the router. Make sure that you can access your router via UART. 3. Restart the router then repeatedly press ctrl + c to skip default boot. 4. Type > bootmenu 5. Press '2' to select upgrade firmware 6. Press 'Y' on 'Run image after upgrading?' 7. Press '0' and hit 'enter' to select TFTP client (default) 8. Fill the U-Boot's IP address and TFTP server's IP address. 9. Finally, enter the 'firmware' filename. Based on patch adding support for similar Zbtlink ZBT-Z8103AX device by Ian Ishmael C. Oderon. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 6.1: backport upstream Aquantia PHY firmware loader patchesChristian Marangi2023-11-24
| | | | | | | | | | | | Backport merged upstream patch that adds support for firmware loader from NVMEM or attached filesystem for Aquantia PHYs. Refresh all kernel patches affected by this change. Also update the path for aquantia .ko that got moved to dedicated directory upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* firmware-utils: Fix PKG_MIRROR_HASHHauke Mehrtens2023-11-23
| | | | | | | | This fixes the mirror hash to the version of the file uploaded to the download mirror and which my build calculated. Fixes: b117e7244f9e ("firmware-utils: update to Git HEAD (2023-11-21)") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* firmware-utils: update to Git HEAD (2023-11-21)Rafał Miłecki2023-11-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1d42292d8063 tplink-safeloader: Add TP-Link Archer A6 V3.20 3338f5389d72 tplink-safeloader: add TL-WPA8635P v3 17ca5eeb1c10 tplink-safeloader: add TL-WPA8631P v4 f730ad2fa0b4 bcmblob: new tool for reading Broadcom's BLOBs cb1ddac98124 firmware-utils: fix typo in error message when no OpenSSL library found 916633160dc9 bcmclm: new tool for reading Broadcom's CLM data a2d49fb1e188 tplink-safeloader: add RU support-list entry for Archer C6U v1 bb12cf5c3fa9 tplink-safeloader: Add support for TP-Link Deco M5 The special_id values are the same for EU and Asian models, and they apply to all models: v1, v2, and v3. They are not sorted as they are currently in the same order as extracted from the official firmware image. 9e2de8515be1 tplink-safeloader: add EAP610 v3 and EAP613 v1 a170683c0e11 firmware-utils: fix use of NULL string progname 89875fc18b57 tplink-safeloader: CPE510: add Canadian support 9e211d2980fe mktplinkfw2: add support to extract bootloader images c18f662f3c74 mktplinkfw2: add support to pack bootloader 3dc133915f87 mktplinkfw2: show exact exceed bytes when the image is to big d16ff798d58a tplink-safeloader: WPA8631: add v4 AU, US 0fa1cc51013f zytrx: add LTE5398-M904 635466123429 firmware-utils: ptgen: add SiFive GPT partition support ba5bc4e1ae9d add dlink-sge-image for D-Link devices by SGE 3b114de29cf7 lxlfw: move code opening LXL to helper function 8e149e480391 lxlfw: move code copying data to helper function 16fa89076122 lxlfw: fix struct lxl_hdr attribute d770cab82e58 lxlfw: support embedding blobs eaf2ea28dbe6 lxlfw: support extracting image 12bf1a99bd6e lxlfw: support certificate & signature blobs Fixes: https://github.com/openwrt/openwrt/issues/12939 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* umdns: update to Git HEAD (2023-11-21)Felix Fietkau2023-11-21
| | | | | | | 9040335e102b interface: fix interface memory corruption b1e023eda358 add udebug support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* udebug: update to Git HEAD (2023-11-20)Felix Fietkau2023-11-20
| | | | | | 759d9404034b ring: add missing fread return code check Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to Git HEAD (2023-11-20), adds udebug supportFelix Fietkau2023-11-20
| | | | | | | | | 9dcc37a77cb2 add udebug support 525fa911e8ab replace DPRINTF calls with D(...) 7642eaba3838 system-linux: fix bogus debug error messages on adding bridge members f3e06e81b347 wireless: add bridge_isolate option Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: add settings for Synology DS213jDaniel Golle2023-11-20
| | | | | | | Add settings to be able to access the U-Boot environment on the Synology DS213j NAS. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add missing acl entries for udebugFelix Fietkau2023-11-20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubus: update to Git HEAD (2023-11-14)Felix Fietkau2023-11-20
| | | | | | b3e8c4ef07eb Add auto subscribe support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add udebug supportFelix Fietkau2023-11-20
| | | | | | | This is not activated by default and must be explicitly enabled via ubus It supports reporting log messages and netlink packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* udebug: add new packageFelix Fietkau2023-11-20
| | | | | | | This will help with debugging by providing system wide access to per-process ring buffers with debug data. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mediatek: Fix ubi command in uboot commandsCarter Wang2023-11-19
| | | | | | | Fix typo 'ubi remote ...' -> 'ubi remove ...'. Signed-off-by: Carter Wang <carter.wang@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: ipcalc.sh: Should take netmask or prefix after slashPhilip Prindeville2023-11-19
| | | | | | | | | | | | | | | | dnmasq.init now invokes ipcalc.sh as either: ipcalc.sh address/netmask ... or: ipcalc.sh address/prefix but the existing version doesn't accept the 2nd notation. We're trying to rationalize the usage of ipcalc.sh, and here we add support for the 2nd format. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* hostapd: fix undeclared variable iface_nameNazar Mokrynskyi2023-11-19
| | | Signed-off-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
* uboot-mediatek: add JCG Q30 PRO supportChukun Pan2023-11-19
| | | | | | | The vendor uboot will verify firmware at boot. So add a custom uboot build for this device. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* dnsmasq: Invoke new ipcalc with CIDR notationPhilip Prindeville2023-11-15
| | | | | | | | | | | | | | | | | | | The new rewritten ipcalc.sh understands 3 notations: ipaddr/prefix ... ipaddr/dotted-netmask ... ipaddr dotted-netmask ... meaning that the previous 4th non-standard notation of "ipaddr prefix" will be dropped, alas that's the notation that dnsmasq currently uses. This change has us using the first notation which is the most common. This behavior came in as https://github.com/openwrt/openwrt/commit/eda27e8382f3e5253defab5419e95d4b51f72de3 a long time ago. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* qca-ssdk: disable building ISISCRobert Marko2023-11-15
| | | | | | | | | | | | | | ISISC is the QCA codename for their Atheros switch family including AR237, QCA8337 etc. Since we have qca8k support in OpenWrt, there is no need to have SSDK support for these switches, and boards that also have external switches can just use qca8k. Disable QCA803x PHY support as well, since all of those are supportable via at803x driver. Signed-off-by: Robert Marko <robimarko@gmail.com>
* netifd: update to Git HEAD (2023-11-14)Jo-Philipp Wich2023-11-14
| | | | | | | 8587c074f1eb interface-ip: fix IPv4 route target masking Fixes: https://github.com/openwrt/netifd/issues/17 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* qca-ssdk: disable PTP and swconfig by defaultRobert Marko2023-11-14
| | | | | | | | PTP and swconfig support in SSDK require kernel modifications we dont need nor we want to support for now, so move the PTP and swconfig disablement into general build options as they are not ipq807x specific. Signed-off-by: Robert Marko <robimarko@gmail.com>
* qca-ssdk: pass SoC to buildRobert Marko2023-11-14
| | | | | | | | | | | Recent SSDK versions started also parsing the "SoC" variable to identify the SoC along with the "CHIP_TYPE". We are not passing "SoC" currently and this leads to components we dont need like MHT (New 2.5G quad port switch) being compiled and then unused, so lets just pass the "SoC" as well. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: realtek: rtw88: add RTL8822CU supportChukun Pan2023-11-13
| | | | | | Add the Realtek RTL8822CU support to rtw88 package. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mac80211: realtek: rtw88: add RTL8821CU supportChukun Pan2023-11-13
| | | | | | Add the Realtek RTL8821CU support to rtw88 package. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mac80211: realtek: rtw88: add RTL8821CE supportChukun Pan2023-11-13
| | | | | | Add the Realtek RTL8821CE support to rtw88 package. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mac80211: realtek: fix rtw88 driver dependenciesChukun Pan2023-11-13
| | | | | | | | | | | | | The RTW88 PCI/USB driver uses the same firmware, so add firmware dependencies. Also CI report that: Package kmod-rtw88-usb is missing dependencies for the following libraries: usbcore.ko This commit fixes it. Fixes: 3538a19 ("mac80211: split rtw88 configuration for each supported chip") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* linux-firmware: add Realtek RTW89 firmwareChukun Pan2023-11-13
| | | | | | This is the firmware required for the rtw89 driver. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* linux-firmware: add Realtek RTL8723DE/RTL8821CE firmwareChukun Pan2023-11-13
| | | | | | | This adds packages for the Realtek RTL8723DE/RTL8821CE firmware to be used with the rtw88 driver. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* devel/gdb: Disable libzstd explicitlyHannu Nyman2023-11-13
| | | | | | | | New gdb has got libzstd support, and libzstd gets detected at buildbot build. Explicitly disable it to avoid dependency. Fixes: f79de8ec65 ("gdb: Update to 13.2") Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* qca-ssdk: fix unsupported scenario with PORT1 not declared in switch bmpChristian Marangi2023-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 947b44d ("ipq807x: fix wrong define for LAN and WAN ess mask") started fixing wrong switch_lan_bmp that defined lan there weren't actually present. This displayed a fragility in the malibu phy init code in qca-ssdk. Add patch to fix this. Also update each DTS with the new required property if needed. The new binding malibu_phy_start_addr is required with devices that place the malibu first PHY referring port1 on a different PHY addres than 0. The most common configuration is 0 but some device (for example Qnap 301W) place the malibu PHY at an offset to address 16. Refer to ipq8074-ess dtsi for extensive description on how to derive this value. Quoting the patch detailed description: The usage of first_phy_addr is EXTREMELY FRAGILE and results in dangerous results if the OEM (or anyone that by chance try to implement things in a logical manner) deviates from the default values from the "magical template". To be in more details. With QSDK 12.4, some tweaks were done to improve autoneg and now on every call of port status, the phydev is tried to add. This resulted in the call and log spam of an error with ports that are actually not present on the system with qsdk reporting phydev is NULL. This itself is not an error and printing the error is correct. What is actually an error from ages is setting generic bitmap reporting presence of port that are actually not present. This is very common on OEM where the switch_lan_bmp is always a variant of 0x1e (that on bitmap results in PORT1 PORT2 PORT3 PORT4 present) or 0x3e (PORT1 PORT2 PORT3 PORT4 PORT5). Reality is that many device are used as AP with one LAN port or one WAN port. (or even exotic configuration with PORT1 not present and PORT2 PORT3 PORT4 present (Xiaomi 3600) With this finding one can say... ok nice, then lets update the DT and set the correct bitmap... Again world is a bad place and reality is that this cause wonderful regression in some case of by extreme luck the first ever connected port working and the rest of the switch dead. The problem has been bisected to all the device that doesn't have the PORT1 declared in any of the bitmap. With this prefaction in mind, on to the REAL problem. malibu_phy_hw_init FOR SOME REASON, set a global variable first_phy_addr to the first detected PHY addr that coincidentally is always PORT1. PORT1 addr is 0x0. The entire code in malibu_phy use this variable to derive the phy addrs in some function. Declaring a bitmap where the PORT1 is missing (or worse PORT4 the only one connected) result in first_phy_addr set to 1 or whatever phy addr is detected first setting wrong value all over the init stage. To fix this, introduce a new binding malibu_first_phy_addr to manually declare the first phy that the malibu PHY driver should use and permit to detach it from port bmp detection. The legacy detection is kept for compatibility reason. Fixes: #13945 Fixes: 947b44d9ae17 ("ipq807x: fix wrong define for LAN and WAN ess mask") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Robert Marko <robimarko@gmail.com> # Qnap 301W Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* Revert "qca-ssdk: fix unsupported scenario with PORT1 not declared in switch ↵Christian Marangi2023-11-13
| | | | | | | | | | | bmp" This reverts commit 8cce00bc9dddc3fc47d63625b0f512693c27ce2f. The confusion was real and this change cause regression on other advanced devices that makes actual use of the first_phy_addr value. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mac80211: rt2x00: correct wrong BBP register in RxDCOC calibrationShiji Yang2023-11-13
| | | | | | | This fix can reduce the total calibration time from 6 seconds to 1 second. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mac80211: sync some rt2x00 patches with wireless-nextShiji Yang2023-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | Some local patches have been sent to upstream and they are slightly different from the upstream version. So it's better to replace them to avoid conflicts with the new mac80211 backport driver. The different parts have been merged into patch 996. This commit also includes some additional fixes: * Fix watchdog function. * Improve MT7620 register initialization. * Introduce DMA busy watchdog for rt2800. P.S. Sometimes rt2800 series chips may fall into a DMA busy state. The tx queues become very slow and the client cannot connect to the AP. Usually, We can see a lot of hostapd warnings at this point: 'hostapd: IEEE 802.11: did not acknowledge authentication response' The DMA busy watchdog can help the driver automatically recover from this abnormal state. By the way, setting higer 'cell_density' and disabling 'disassoc_low_ack' can significantly reduce the probability of the DMA busy. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mac80211: add support for rtw88_8822buAlexis Lothoré2023-11-12
| | | | | | | | | Kernel 6.1 has introduced support for RTW8822BU network adapter, which is an USB variant of the rtw8822b 802.11ac chipset family. Build and install the corresponding module in the rtw88 package Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
* mac80211: split rtw88 configuration for each supported chipAlexis Lothoré2023-11-12
| | | | | | | | | | | | | | | Current rtw88 build configuration builds modules for all chips supported by rtw88 driver family. This brings the following issues: - adding a chip with a different bus is not convenient (all chips currently depends on PCI) - some features requirements are not relevant for all chips in family (eg 802.11AC is enforced but RTW88-8723DE is only a 802.11b/g/n chip) Remove those constraints/issues by adding one module build option per supported chip, and add intermediate options to properly cascade dependencies. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
* base-files: Create /root w/ appropriate permissionsPhilip Prindeville2023-11-12
| | | | | | | If /root is created with too permissive permissions, then sshd won't trust the contents of /root/.ssh as being adequately protected. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* mac80211: ath9k-htc: support "chanbw" in debugfsLech Perczak2023-11-12
| | | | | | | | | | | | | | ath9k-htc USB-based adapters also support 5/10MHz channel bandwidth. Move the code handling the features in debugfs to common-debug.c, and create proper registration functions to use in debug.c and htc_drv_debug.c, leaving only debugfs registration there. While at that, refresh one patch that would conflict otherwise. Tested on TP-Link Archer C7v2 (ath79) and TP-Link WN722Nv1 (AR9287) and WN822Nv2 (AR7010+AR9287). Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* mac80211: ath9k-htc: support "eeprom" in debugfsLech Perczak2023-11-12
| | | | | | | | | | | | | | | ath9k-htc USB-based adapterssupport 5/10MHz channel bandwidth, the same as standard ath9k ones. Move the code handling the features in debugfs to common-debug.c, and create proper registration functions to use in debug.c and htc_drv_debug.c, leaving only debugfs registration there. While at that, refresh one patch that would conflict otherwise. Tested on TP-Link Archer C7v2 (ath79) and TP-Link WN722Nv1 (AR9287) and WN822Nv2 (AR7010+AR9287). Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: kmod-usb-serial-mos7720: support parallel port in MCS7715Lech Perczak2023-11-12
| | | | | | | | | | In-kernel driver for MCS7715 USB-serial bridge has a bool option, enabling support for parallel port on that chip - which is tied to the same kernel module. Enable it and select kmod-ppdev, as the image size increase is minimal and the package isn't bundled in the images by default. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* iptables: backport patch fixing bug with string moduleChristian Marangi2023-11-12
| | | | | | | Backport patch fixing critical bug with string module merged upstream. Fixes: #13812 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ath10k-ct: Restore functionality after switch to 6.4 versionHannu Nyman2023-11-11
| | | | | | | | | | Adjust our local ath10k-ct patches to the change from the -ct 6.2 version to 6.4. This restores e.g. the LED functionality. Fixes: 7d3651f1b9b ("ath10k-ct: switch to 6.4") Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* qca-ssdk: fix unsupported scenario with PORT1 not declared in switch bmpChristian Marangi2023-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 947b44d9ae17 ("ipq807x: fix wrong define for LAN and WAN ess mask") started fixing wrong switch_lan_bmp that defined lan there weren't actually present. This displayed a fragility in the malibu phy init code in qca-ssdk. Add patch to fix this. Quoting the patch detailed description: I'm very confused by this and to me it's not clear the real usage of this logic. From what I can see the usage of this is EXTREMELY FRAGILE and results in dangerous results if the OEM (or anyone that by chance try to implement things in a logical manner) deviates from the default values from the "magical template". To be in more details. With QSDK 12.4, some tweaks were done to improve autoneg and now on every call of port status, the phydev is tried to add. This resulted in the call and log spam of an error with ports that are actually not present on the system with qsdk reporting phydev is NULL. This itself is not an error and printing the error is correct. What is actually an error from ages is setting generic bitmap reporting presence of port that are actually not present. This is very common on OEM where the switch_lan_bmp is always a variant of 0x1e (that on bitmap results in PORT1 PORT2 PORT3 PORT4 present) or 0x3e (PORT1 PORT2 PORT3 PORT4 PORT5). Reality is that many device are used as AP with one LAN port or one WAN port. (or even exotic configuration with PORT1 not present and PORT2 PORT3 PORT4 present (Xiaomi 3600) With this finding one can say... ok nice, then lets update the DT and set the correct bitmap... Again world is a bad place and reality is that this cause wonderful regression in some case of by extreme luck the first ever connected port working and the rest of the switch dead. The problem has been bisected to all the device that doesn't have the PORT1 declared in any of the bitmap. With this perfection in mind, on to the REAL problem. malibu_phy_hw_init FOR SOME REASON, set a global variable first_phy_addr to the first detected PHY addr that coincidentally is always PORT1. PORT1 addr is 0x0. The entire code in malibu_phy use this variable to derive the phy addrs in some function. Declaring a bitmap where the PORT1 is missing (or worse PORT4 the only one connected) result in first_phy_addr set to 1 or whatever phy addr is detected first setting wrong value all over the init stage. To fix this, just drop this variable and hardcode everything to assume the first phy adrr is ALWAYS 0 and remove calculation and use define for special case. With the following change normal switch traffic is restored and ports function is recovered. Fixes: #13945 Fixes: 947b44d9ae17 ("ipq807x: fix wrong define for LAN and WAN ess mask") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* netifd: update to Git HEAD (2023-11-11)Christian Marangi2023-11-11
| | | | | | c739dee0a37b system-linux: refresh MAC address on DSA port conduit change Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* debugcc: add licensing informationPetr Štetiar2023-11-11
| | | | | | | Information about package license is important, so lets add it. Fixes: 79ee0d2ceead ("debugcc: add new package to debug IPQ based SoC clocks") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* debugcc: add new package to debug IPQ based SoC clocksChristian Marangi2023-11-10
| | | | | | | Add new package to debug IPQ clocks using debug regs and hardware oscillator. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* dtc: add option for a static buildRobert Marko2023-11-10
| | | | | | | | | | | I find myself manually compiling dtc as a staticly linked binary rather often while porting a new device to OpenWrt as dtc is rarely included in various vendor modifications of OpenWrt. So, since dtc offers a convenient meson option to build it as staticaly linked binary, lets make it a compile time option. Signed-off-by: Robert Marko <robimarko@gmail.com>
* wolfssl: update to 5.6.4Nick Hainke2023-11-10
| | | | | | | | | | Releae Notes: https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.4-stable Remove upstreamed patch: - 001-fix-detection-of-cut-tool-in-configure.ac.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
Powered by cgit, Themed by Ted Yin.