aboutsummaryrefslogtreecommitdiff
path: root/package
Commit message (Collapse)AuthorAge
...
* ramips: add support for mtk eip93 crypto engineAviana Cruz2023-09-12
| | | | | | | | | Mediatek EIP93 Crypto engine is a crypto accelerator which is available in the Mediatek MT7621 SoC. Signed-off-by: Aviana Cruz <gwencroft@proton.me> Co-authored-by: Richard van Schagen <vschagen@icloud.com> Co-authored-by: Chukun Pan <amadeus@jmu.edu.cn>
* base-files: sysupgrade: Add 2 sec sleep into process KILL loopHannu Nyman2023-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 2 seconds sleep after each forcibly killed/tried-to-kill process in the final process termination loop in sysupgrade stage2. This is needed especially for qualcommax/ipq807x, where ath11k wireless driver may have a long 10-20 seconds delay after termination before actually getting killed. This often breaks sysupgrade. The current KILL loop in kill_remaining does all 10 kill attempts consecutively without any delay, as evidenced here in a failing sysupgrade. It does not allow any time for the process to finalize its internal termination. Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending TERM to remaining processes ... Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2122) Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending KILL to remaining processes ... Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2122) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Failed to kill all processes. sysupgrade aborted with return code: 256 The change in this commit adds a 2 seconds delay after each kill attempt in order to allow some processes to more gracefully handle their internal termination. The result is like this: Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending TERM to remaining processes ... Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2309) Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2324) Sun Sep 3 11:15:14 EEST 2023 upgrade: Sending KILL to remaining processes ... Sun Sep 3 11:15:14 EEST 2023 upgrade: Sending signal KILL to hostapd (2309) [ 699.827521] br-lan: port 7(hn5wpa2r) entered disabled state [ 699.908673] device hn5wpa2r left promiscuous mode [ 699.908721] br-lan: port 7(hn5wpa2r) entered disabled state [ 701.038029] br-lan: port 6(hn5wpa3) entered disabled state Sun Sep 3 11:15:16 EEST 2023 upgrade: Sending signal KILL to hostapd (2324) [ 702.058256] br-lan: port 5(hn2wlan) entered disabled state [ 709.250063] stage2 (8237): drop_caches: 3 Sun Sep 3 11:15:25 EEST 2023 upgrade: Switching to ramdisk... The delay introduced here only kicks in if there is some process that does not get terminated by the first TERM call. Then there is at least one 2 sec wait after the first KILL loop round. This commit is related to discussion in PRs #12235 and #12632 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Reviewed-by: Robert Marko <robimarko@gmail.com>
* hostapd: fix bringing up AP in AP+mesh configurationsFelix Fietkau2023-09-12
| | | | | | Pass the correct frequency + secondary channel offset to hostapd Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: clear ucode interface/bss resource pointersFelix Fietkau2023-09-12
| | | | | | Avoids potential use-after-free bugs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix applying gratuitous ARP settings with bridge-vlanFelix Fietkau2023-09-12
| | | | | | The arp_accept setting needs to be applied to the snoop_iface Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add missing dependency for iwlwifiFelix Fietkau2023-09-12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix build regressions on linux 6.1Felix Fietkau2023-09-11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to version 6.5Felix Fietkau2023-09-11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: ramips: add support for ALFA Network AX1800RMPiotr Dymacz2023-09-11
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* arm-trusted-firmware-mediatek: fix hang on reboot on MT7622Daniel Golle2023-09-10
| | | | | | | | | With recent updates of TF-A the previously already fixed bug slipped back into the source tree. Again, reorder bl2 init for MT7622 and initialize WDT only after DRAM init has completed to avoid the notorious hang. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: sync mtk-snand driver with SDKDaniel Golle2023-09-10
| | | | | | | | Sync SPI-NAND/ECC controller driver for MT7622, MT7981, MT7986 and MT7988: * Platform data for MT7981 was actually missing and is now added. * Add support for Winbond W25N01KV 1Gbit chip. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Cetron CT3003Patricia Lee2023-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **Hardware specification:** - SoC: MediaTek MT7981B 2x A53 - Flash: ESMT F50L1G41LB 128MB - RAM: Nanya NT5CC128M16JR-EK 256MB - Ethernet: 4 x 10/100/1000 Mbps - Switch: MediaTek MT7531AE - WiFi: MediaTek MT7976C - Button: Reset, Mesh - Power: DC 12V 1A - UART: 3.3v, 115200n8 | Layout: | | :-------- | | <Antenna> | | VCC | | GND | | Tx | | Rx | **Flash instructions:** 1. Rename `openwrt-mediatek-filogic-cetron_ct3003-squashfs-factory.bin` to `factory.bin`. 2. Upload the `factory.bin` using the device's Web interface. 3. Click the upgrade button and wait for the process to finish. 4. Access the OpenWrt interface using the same password. 5. Use the 'Restore' function to reset the firmware to its initial state. **Notes:** If you plan to recovery the stock firmware in the future, it's advisable to connect the device via the serial port and enter failsafe mode to back up all the MTD partitions before proceeding the steps above. Signed-off-by: Patricia Lee <patricialee320@gmail.com>
* uboot-rockchip: add suport for Radxa ROCK Pi EJayantajit Gogoi2023-09-05
| | | | | | | | | | | | | | | | | | | | | | | | | Add uboot support for Radxa ROCK Pi E, rockchip rk3328 board. Add pre-built files to fix swig dependencies. Specification: - CPU: Rockchip RK3328 64-bit Quad-core - RAM: DDR3 256MB ~ 2GB - Network: 1 x 10/100/1000M Ethernet 1 x 10/100M Ethernet - USB Host: 1 x USB3.0 Type A HOST 1 x USB2.0 OTG (40-pin pin-header) - Wireless: RTL8723DU/RTL8821CU - Power Supply: Type-C 5V Installation: - Write image to SD Card or EMMC with dd - Boot ROCK Pi E from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
* wireless-regdb: update to 2023.09.01Yuu Toriyama2023-09-03
| | | | | | | | | | | Changes: 9dc0800 wireless-regdb: Update regulatory rules for Philippines (PH) 111ba89 wireless-regdb: Update regulatory rules for Egypt (EG) from March 2022 guidelines ae1421f wireless-regdb: Update regulatory info for Türkiye (TR) 20e5b73 wireless-regdb: Update regulatory rules for Australia (AU) for June 2023 991b1ef wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
* hostapd: allow adding initial AP without breaking STA interface connectionFelix Fietkau2023-09-03
| | | | | | | | | | When switching from a STA-only configuration to AP+STA on the same phy, the STA was previously restarted in order to notify hostapd of the new frequency, which might not match the AP configuration. Fix the STA restart by querying the operating frequency from within hostapd when bringing up the AP. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix config change detection on boolean valuesFelix Fietkau2023-09-03
| | | | | | Check for null instead of truish value Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix parsing HT secondary channel offsetFelix Fietkau2023-09-02
| | | | | | It returned the wrong value when using HT40- Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: reset center_seg0_idx for 2.4 GHzFelix Fietkau2023-09-02
| | | | | | Fixes 40 MHz channel bandwidth on 2.4 GHz AP+STA Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: use proper helper functions for setting seg0/seg1 idx and chwidthFelix Fietkau2023-09-02
| | | | | | Simplifies code and removes #ifdef statements Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall4: update to the latest versionFelix Fietkau2023-09-01
| | | | | | | | | 23a434d0d15d tests: fix expected test output 840ccdeeabce fw4: avoid emitting invalid rule jump targets 20da9933fd7e fw4: fix another instance of invalid rule jump targets 598d9fbb5179 fw4: remove special cases around hw flow offloading Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove cfg80211 dependencyFelix Fietkau2023-09-01
| | | | | | Always enable nl80211 driver support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to latest git HEADDaniel Golle2023-09-01
| | | | | | 1a07f1dff32b make_ethtool_modes_h.sh: apply anti-bashism Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to latest git HEADDaniel Golle2023-08-31
| | | | | | | | | | | | | | | f429bd94f99e system-linux: switch to new ETHTOOL_xLINKSETTINGS API Fixes AN announcement for speeds beyond 1 GBit/s. Adds new UCI options for Ethernet devices: - autoneg: switch on or off auto-negotiation - pause: if set to 0, do not announce symmetric flow control capability - asym_pause: if set to 0, do not announce asymmetric flow control capability. - rxpause: if set overrides AN and forces RX pause accordingly - txpause: if set overrides AN and forces TX pause accordingly Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: select libopenssl-legacy for openssl variantsFelix Fietkau2023-08-31
| | | | | | Without it, a lot of authentication modes fail without obvious error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove eap-eap192 auth type valueFelix Fietkau2023-08-31
| | | | | | It is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2023-08-31
| | | | | | | | | | | | | | | | | | | db3934d2f740 scripts/netifd-wireless.sh: properly fix WPA3 Enterprise support Support the following values for the different WPA3 Enterprise modes: - wpa3-mixed: WPA3 Enterprise transitional mode This supports EAP with both SHA1 and SHA-256, with optional MFP - wpa3: WPA3 Enterprise only mode This supports only SHA256 with mandatory MFP - wpa3-192: WPA3 Enterprise with mandatory 192 bit support This uses only GCMP-256 ciphers Disable 192 bit support and GCMP-256 ciphers for the regular "wpa3" mode. It seems that even leaving in optional 192 bit support breaks auth on some clients, including iOS devices. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: support eap-eap2 and eap2 auth_type valuesFelix Fietkau2023-08-31
| | | | | | | WPA3 Enterprise-transitional requires optional MFP support and SHA1+SHA256 WPA3 Enterprise-only requires SHA1 support disabled and mandatory MFP. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix FILS key mgmt type for WPA3 Enterprise 192 bitFelix Fietkau2023-08-31
| | | | | | Use the SHA384 variant to account for longer keys with more security Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove non-upstream antenna gain configuration patchFelix Fietkau2023-08-30
| | | | | | | | | It seems that this was not functioning properly and was likely completely unused. Keeping this out of tree also introduced some annoying churn when updating, because of the iw nl80211.h sync patch. If this is needed, it will be reintroduced when/if it is added upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: enable vfio and vfio-pci for armsr-armv8Mathew McBride2023-08-29
| | | | | | | | | Arm platforms with the right hardware blocks (such as GICv3.0+ interrupt controller and SMMU/IOMMU) are able to use vfio-pci to pass through PCI devices to a VM. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* kernel: vfio: remove unneeded enable_unsafe_noiommu_mode parameterMathew McBride2023-08-29
| | | | | | | | | | | | | The vfio module only exposes the enable_unsafe_noiommu_mode parameter if CONFIG_VFIO_NOIOMMU is enabled. When it isn't, the module will complain about an unknown parameter: vfio: unknown parameter 'enable_unsafe_noiommu_mode' ignored As CONFIG_VFIO_NOIOMMU is disabled by the module package, we can remove the module loading parameter. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* arm-trusted-firmware-mediatek: enable built-in 2.5G PHY on MT7988Daniel Golle2023-08-28
| | | | | | | | | | Always enable built-in 2.5G PHY on MT7988 for now, so that it can be used. In future it would be nice to be able to switch power and MDIO access via address 0 at run-time in Linux, both, to be able to use external PHYs at address 0 and to reduce power consumption on systems not using the built-in 2.5G PHY. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix dependency on TF-A for MT7988 RFB (sdmmc)Daniel Golle2023-08-28
| | | | | | | | | The U-Boot build for the MT7988 reference board booting from SD card wrongly depended on the 'ddr4' variant of the ARM TrustedFirmware-A build even though the 'comb' variant is used. Fix that dependency. Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add builds for UniFi 6 LR v2 and v3Daniel Golle2023-08-28
| | | | | | | While the v2 is nearly identical to v1, v3 uses a different PHY and needs a different build for Ethernet to work in U-Boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: build fully-featured U-Boot for MT7988 RFBDaniel Golle2023-08-28
| | | | | | | | | | | | | | | | | | Select many potentially useful options for the MT7988 RFB U-Boot builds. The resulting loader is intended as a development tool and intends to be generic. It does *not* have a default bootcmd set, but allows to boot pretty much everything, including EFI executables. To install this U-Boot build to the eMMC: opkg install mmc-utils partx-utils mmc bootpart enable 1 1 /dev/mmcblk0 echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=*mediatek_mt7988a-rfb-nand-emmc-preloader.bin of=/dev/mmcblk0boot0 dd if=*mediatek_mt7988a-rfb-nand-emmc-gpt.bin of=/dev/mmcblk0 partx -a /dev/mmcblk0 dd if=*mediatek_mt7988a-rfb-nand-emmc-bl31-uboot.fip of=/dev/mmcblk0p3 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ltq-vdsl-vr11-mei: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | Define the old PDE_DATA marco to the new pde_data function. Signed-off-by: Andre Heider <a.heider@gmail.com>
* vrx518_tc: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | | Define the old PDE_DATA marco to the new pde_data function and conditionally use the newer APIs. Signed-off-by: Andre Heider <a.heider@gmail.com>
* vrx518_ep: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | | Unconditionally use the newer APIs, since our oldest supported kernel contains them too. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-ifxos: fix compilation error with kernel 6.1Andre Heider2023-08-27
| | | | | | Conditionally use the newer APIs. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-rockchip: fix swig dependency for ROCK64Antonio Flores2023-08-27
| | | | | | Pre build files to fix swig dependency. Signed-off-by: Antonio Flores <antflores627@gmail.com>
* uboot-rockchip: add support for PINE64 ROCK64Antonio Flores2023-08-27
| | | | | | Add uboot support for PINE64 ROCK64, rockchip rk3328 board. Signed-off-by: Antonio Flores <antflores627@gmail.com>
* uboot-sunxi: bump to 2023.04Zoltan HERPAI2023-08-26
| | | | | | | | | | | | | | | | | Compile-tested: all boards Runtime-tested: - Cortex-A8: pcDuino - Cortex-A7: Bananapro, Bananapi M3 - Cortex-A53:Pine64+ Notes: - binman tries to add firmware for the SCP (system control processor), which we don't build, and is optional for the boot process on 64-bit. Disable this via setting the SCP envvar to /dev/null. For further info, see [1] . [1] https://github.com/u-boot/u-boot/blob/master/board/sunxi/README.sunxi64 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kernel: add vhost-net moduleMathew McBride2023-08-26
| | | | | | | | | | | | | | | | vhost-net is used to accelerate traffic to virtualisation guests that use the virtio-net network card in QEMU. Generally it is invoked by specifying "vhost=on" to a QEMU -netdev device: qemu-system-aarch64 -nographic -M virt -cpu host \ --enable-kvm -bios u-boot.bin -smp 1 -m 2048 \ -drive file=openwrt-armsr-armv8.img,format=raw,index=0,media=disk \ -device "virtio-net,netdev=landev,disable-legacy=off,disable-modern=off" \ -netdev "tap,id=landev,helper=/usr/lib/qemu-bridge-helper --br=br-lan,vhost=on" Signed-off-by: Mathew McBride <matt@traverse.com.au>
* arm-trusted-firmware-mvebu: bump to v2.9Robert Marko2023-08-26
| | | | | | We are using the outdated 2.7 TF-A, so lets update to current v2.9 version. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: update CM3 GCC to 12.3rel1Robert Marko2023-08-26
| | | | | | | | | We are using the outdated 11.2 GCC for CM3, lets update to the current 12.3rel1 version from ARM [1]. [1] https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump cryptopp to version 8.8Robert Marko2023-08-26
| | | | | | | We are using the outdated Crypto++ version 8.5, so lets update to the current version 8.8. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump mox-boot-builder to current versionRobert Marko2023-08-26
| | | | | | | | | | | | | | | | | We have to move to use git clone as there are no newer tagged releases. Changes: 604f8f5 Default CROSS_CM3 to arm-none-eabi- instead of armv7m-softfloat-eabi- b9b9419 Tidy up license information 0290b2c wtmi: Fix typo a10b8e9 Makefile: fix a53-firmware.bin generation (maximum size is not optimal) f654082 wtmi: Add const qualifier to isr_vector 4a43a3b wtmi: Improve detection of ESPRESSObin boards with Topaz 189e629 wtmi: Improve detection of boards with insufficient MDIO pull-up 3dac4fe wtmi: Fix detection of Armada 3720 Devel Board 3ca4dfa Bump mox-imager commit Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump mv-ddr-marvell to current versionRobert Marko2023-08-26
| | | | | | | | Changes: 1de442d Convert floating point operations to integer operations ce6770d Modify mv_ddr4_calibration_validate function body to match function header Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: bump a3700-utils to current versionRobert Marko2023-08-26
| | | | | | | | Changes: a3e1c67 wtmi: Fix linker output sections f65e3bf wtmi: Remove usage of non-existant string.h file and memcpy() function Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mac80211: Add ath11k to the help text of ATH_DEBUGJacob Aharon2023-08-25
| | | | | | | ATH_DEBUG package is required to debug ath11k. Fixes: 93ae4353cdf6 ("mac80211: add ath11k PCI support") Signed-off-by: Jacob Aharon <ah.jacob@gmail.com>
Powered by cgit, Themed by Ted Yin.