aboutsummaryrefslogtreecommitdiff
path: root/package/network/services
Commit message (Collapse)AuthorAge
...
* dropbear: increase default receive window sizeDavid Bauer2023-12-28
| | | | | | | | | | | Increasing the receive window size improves throughout on higher-latency links such as WAN connections. The current default of 24KB caps out at around 500 KB/s. Increasing the receive buffer to 256KB increases the throughput to at least 11 MB/s. Signed-off-by: David Bauer <mail@david-bauer.net>
* dnsmasq: invert logic for "localuse"Thibaut VARÈNE2023-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to this commit, "localuse" (which enables local resolving through dnsmsasq) was off by "default". That default was in turn overridden when "noresolv" was unset (which itself is the default for "noresolv") *and* "resolvfile" was "/tmp/resolv.conf.d/resolv.conf.auto" (also the default for this parameter). In other words, the "default" unset value for "localuse" would only be ever used in specific *non-default* configurations. However, the problem with that logic is that a user who wants to ignore their ISP-provided resolvers by setting "noresolv" to true ends up with a device that will *only use* said resolvers for local DNS queries, serving clients' queries via dnsmasq (which now ignores the ISP resolvers). This can lead to confusion and break random setups as the DNS lookup performed on clients behalf can differ in their replies from DNS lookups performed locally on the router. Furthermore, "localuse" is not configurable through Luci, contrary to the other two involved settings, adding further confusion for the end user. To work around this situation, the logic that sets "localuse" is inverted: "localuse" now defaults to on by default, and IFF "noresolv" is unset (default) AND "resolvfile" is changed from default THEN "localuse" gets turned back off, allowing for more sensible behaviour. "localuse" value set in config/dhcp still overrides the logic in all cases, as it did already. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* hostapd: use new udebug ubus api to make debug rings configurableFelix Fietkau2023-11-30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: mark global ubus context as closed after forkSven Eckelmann2023-11-26
| | | | | | | | | | | | | | If the dnsmasq process forks to handle TCP connections, it closes the ubus context. But instead of changing the daemon wide pointer to NULL, only the local variable was adjusted - and this portion of the code was even dropped (dead store) by some optimizing compilers. It makes more sense to change the daemon->ubus pointer because various functions are already checking it for NULL. It is also the behavior which ubus_destroy() implements. Fixes: d8b33dad0bb7 ("dnsmasq: add support for monitoring and modifying dns lookup results via ubus") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* umdns: update to Git HEAD (2023-11-21)Felix Fietkau2023-11-21
| | | | | | | 9040335e102b interface: fix interface memory corruption b1e023eda358 add udebug support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing acl entries for udebugFelix Fietkau2023-11-20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add udebug supportFelix Fietkau2023-11-20
| | | | | | | This is not activated by default and must be explicitly enabled via ubus It supports reporting log messages and netlink packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix undeclared variable iface_nameNazar Mokrynskyi2023-11-19
| | | Signed-off-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
* dnsmasq: Invoke new ipcalc with CIDR notationPhilip Prindeville2023-11-15
| | | | | | | | | | | | | | | | | | | The new rewritten ipcalc.sh understands 3 notations: ipaddr/prefix ... ipaddr/dotted-netmask ... ipaddr dotted-netmask ... meaning that the previous 4th non-standard notation of "ipaddr prefix" will be dropped, alas that's the notation that dnsmasq currently uses. This change has us using the first notation which is the most common. This behavior came in as https://github.com/openwrt/openwrt/commit/eda27e8382f3e5253defab5419e95d4b51f72de3 a long time ago. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* hostapd: refresh patchesChristian Marangi2023-11-09
| | | | | | Refresh patches for hostapd using make package/hostapd/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscanChristian Marangi2023-11-09
| | | | | | | | | | | | | Currently for 802.1s only, for wifi 2.4GHz in g/n mode, 40MHz is never permitted. This is probably due to the complexity of setting periodic check for the intolerant bit. When noscan option is set, we ignore the presence of the intoleran bit in near AP, so we can enable 40MHz and ignore any complex logic for checking. Fixes: #13112 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: permit also channel 7 for 2.5GHz to be set to HT40PLUSChristian Marangi2023-11-09
| | | | | | | Also channel 7 for 2.4GHz can be set to HT40PLUS. Permit this and add it to the list of the channels. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: fix broke noscan option for meshChristian Marangi2023-11-09
| | | | | | | | | noscan option for mesh was broken and actually never applied. This is caused by a typo where ssid->noscan value is check instead of conf->noscan resulting in the logic swapped and broken. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: use rtnl to set up interfacesFelix Fietkau2023-11-08
| | | | | | In wpa_supplicant, set up wlan interfaces before adding them Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wifi: fix applying mesh parameters when wpa_supplicant is in useFelix Fietkau2023-11-08
| | | | | | | Apply them directly using nl80211 after setting up the interface. Use the same method in wdev.uc as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: don't source functions.sh twicePhilip Prindeville2023-11-02
| | | | | | | | | | It's already pulled in from /etc/rc.common. Fixes: #13758 Fixes: 6b23836071b1 ("package: avoid the use of eval to parse ipcalc.sh output") Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* hostapd: fix broken WPS on broadcom-wl and ath11kPetr Štetiar2023-11-01
| | | | | | | | | | | | | | | | | | | | Upgrading wpa_supplicant from 2.9 to 2.10 breaks broadcom-wl/ath11k based adapters. The reason for it is hostapd tries to install additional IEs for scanning while the driver does not support this. The kernel indicates the maximum number of bytes for additional scan IEs using the NL80211_ATTR_MAX_SCAN_IE_LEN attribute. Save this value and only add additional scan IEs in case the driver can accommodate these additional IEs. Bug: http://lists.infradead.org/pipermail/hostap/2022-January/040178.html Bug-Debian: https://bugs.debian.org/1004524 Bug-ArchLinux: https://bugs.archlinux.org/task/73495 Upstream-Status: Changes Requested [https://patchwork.ozlabs.org/project/hostap/patch/20220130192200.10883-1-mail@david-bauer.net] Reported-by: Étienne Morice <neon.emorice@mail.com> Tested-by: Étienne Morice <neon.emorice@mail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* hostapd: fix OWE association with mbedtlsDavid Bauer2023-10-31
| | | | | | | | | | | | | | | | The code for hostapd-mbedtls did not work when used for OWE association. When handling association requests, the buffer offsets and length assumptions were incorrect, leading to never calculating the y point, thus denying association. Also when crafting the association response, the buffer contained the trailing key-type. Fix up both issues to adhere to the specification and make hostapd-mbedtls work with the OWE security type. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: do not trim trailing whitespace, except for newlineFelix Fietkau2023-10-31
| | | | | | Fixes adding SSID or key with trailing whitespace Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcpd: Bump to latest commitsKevin Darbyshire-Bryant2023-10-28
| | | | | | | d8118f6 config: make sure timer is not on the timeouts list before freeing 4bbc6e7 add hostsfile output in addition to statefile Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: add support for RA option 31Rahul Thakur2023-10-20
| | | | | | | | | | | | | The option 31 in the RA specifies the DNS search list, the support to configure this via UCI is missing in case dnsmasq-dhcpv6 is used. This commit uses the uci option domain (same as is done by odhcpd) to read and pass the DNS search list to dnsmasq, which is then used by RA. Hence, with this commit, we are able to configure DNS search list for the RA messages via the uci config when dnsmsaq-dhcpv6 is used. Signed-off-by: Rahul Thakur <rahul.thakur@iopsys.eu>
* umdns: update to the latest versionFelix Fietkau2023-10-19
| | | | | | | | | | | | 479c7f8676d9 cache: make record/hostname lookup case-insensitive 26c97a5a50bf ubus: add a browse flag for suppressing cached ip addresses c286c51a9bd9 Fix AVL tree traversal in cache_record_find and cache_host_is_known 4035fe42df58 interface: use a global socket instead of per-interface ones c63d465698c7 cache: dump hostname target from srv records b42b22152d73 use hostname from SRV record to look up IP addresses d45c443aa1e6 ubus: add array flag support for the hosts method Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: increase PKG_RELEASE to fix buildsNick Hainke2023-09-29
| | | | | | | Recent hostapd changes just edited the ucode files. It is required to bump the PKG_RELEASE to include the newest changes in the latest builds. Signed-off-by: Nick Hainke <vincent@systemli.org>
* hostapd: fix wpa_supplicant mac address allocation on ap+staFelix Fietkau2023-09-28
| | | | | | | | | | | If the full interface is restarted while bringing up an AP, it can trigger a wpa_supplicant interface start before wpa_supplicant is notified of the allocated mac addresses. Fix this by moving the iface_update_supplicant_macaddr call to just after the point where mac addresses are allocated. Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix mac address of interfaces created via wdev.ucFelix Fietkau2023-09-27
| | | | | | Use the wdev config with the generated MAC address Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix rare crash with AP+STA and ACS enabledFelix Fietkau2023-09-25
| | | | | | | Ensure that the iface disable in uc_hostapd_iface_start also clears the ACS state. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* package: dnsmasq: remove off-by-one mitigation for limitLeon M. Busch-George2023-09-25
| | | | | | | | | In the dnsmasq init script, an off-by-one in the range calculation of ipcalc.sh was mitigated by passing the limit as if its counting started at zero. This patch removes the mitigation as the off-by-one has been fixed. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* package: avoid the use of eval to parse ipcalc.sh outputLeon M. Busch-George2023-09-25
| | | | | | | | | | | Add a function 'ipcalc' to /lib/functions.sh that sets variables more safely using export. With this new function, dnsmasq also handles the return value of ipcalc correctly. Fixes: e4bd3de1be8e ("dnsmasq: refuse to add empty DHCP range") Co-Authored-By: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* lldpd: add lldp_syscapabilities config optionSebastian Pflieger2023-09-24
| | | | | | | allow to overwrite the detected system capabilities e.g. if devices does not operate as bridge. Signed-off-by: Sebastian Pflieger <sebastian@pflieger.email>
* hostapd: fix patch rebase after a crash fixFelix Fietkau2023-09-22
| | | | | | | | The patch refresh accidentally moved the hostapd_ucode_free_iface call to the wrong function Fixes: e9722aef9e84 ("hostapd: fix a crash when disabling an interface during channel list update") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix wpa_supplicant bringup with non-nl80211 driversFelix Fietkau2023-09-22
| | | | | | Needed for wired 802.1x Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing NULL pointer check in uc_hostapd_iface_stopFelix Fietkau2023-09-20
| | | | | | Avoid crashing if the interface has already been removed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix a crash when disabling an interface during channel list updateFelix Fietkau2023-09-20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: use phy name for hostapd interfaces instead of first-bss ifnameFelix Fietkau2023-09-19
| | | | | | Improves reliability in error handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix dynamically adding interfaces with 802.11ax support disabled in ↵Felix Fietkau2023-09-18
| | | | | | | | the build Move an important code line outside of #ifdef CONFIG_IEEE80211AX Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing ubus ACL entries for AP+client (#13449)Felix Fietkau2023-09-15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: support dynamic reload of vlan files when renaming interfacesFelix Fietkau2023-09-15
| | | | | | | Avoids unnecessary AP restart on ifname changes when wifi-vlan sections are present. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix more AP+STA issuesFelix Fietkau2023-09-14
| | | | | | | | | | | | When STA is disconnected, ensure that the interface is in a cleanly stopped state: - if in regular enable/disable state, stop beacons if necessary - in any other state, disable the interface When the STA is up, ignore repeated start commands for the same channel, in order to avoid unnecessary AP restarts Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix more dynamic reload issuesFelix Fietkau2023-09-14
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing return statementFelix Fietkau2023-09-13
| | | | | | Avoids crash due to uninitialized stack/register garbage Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: do not modify hapd->started when stopping an APFelix Fietkau2023-09-13
| | | | | | | It can cause cleanup to be skipped on wifi restart, which can lead to use-after-free bugs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update to the latest versionFelix Fietkau2023-09-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8e6485a1bcb0 PEAP client: Update Phase 2 authentication requirements de9a11f4dde9 TTLS client: Support phase2_auth=2 b2a1e7fe7ab9 tests: PEAP and TTLS phase2_auth behavior 518ae8c7cca8 P2P: Do not print control characters in debug a4c133ea73c7 WPS: Optimize attribute parsing workaround 7a37a94eaa0d Check whether element parsing has failed f80d83368818 ACS: Remove invalid debug print fb2b7858a728 FILS: Fix HE MCS field initialization 50ee26fc7044 P2P: Check p2p_channel_select() return value a50d1ea6a2b3 Add QCA vendor attributes for user defined power save parameters 4636476b7f22 Set RRM used config if the (Re)Association Request frame has RRM IE e53d44ac63e8 AP MLD: Use STA assoc link address in external auth status to the driver 99a96b2f9df7 AP MLD: OWE when SME is offloaded to the driver 96deacf5d710 nl80211: Skip STA MLO link channel switch handling in AP mode d320692d918a AP MLD: Handle new STA event when using SME offload to the driver faee8b99e928 tests: Fix eht_mld_sae_legacy_client to restore sae_pwe c3f465c56c94 wlantest: Handle variable length MIC field in EAPOL-Key with OWE 605034240e0c wlantest: Support multiple input files 053bd8af8ed2 Recognize FTE MLO subelements 43b5f11d969a Defragmentation of FTE 3973300b8ded FTE protected element check for MLO Reassociation Response frame 74e4a0a6f1e4 wlantest: Learn AP MLD MAC address from Beacon frames a5a0b2cf7b1b wlantest: Find non-AP MLD only from affiliated BSSs of the AP MLD 74472758584d wlantest: Recognize non-AP MLD based on any link address for decryption 1ffabd697c67 wlantest: Learn non-AP MLD MAC address from (Re)Association Request frames 4e8e515f92b9 wlantest: Use MLO search for the STA in reassociation 49bf9f2df95a wlantest: Use the MLD MAC address as well for matching STA entries 5434a42ec69c wlantest: Search for FT Target AP using MLD MAC address as well a19fcf685cae wlantest: Include the MLD MAC address of the AP MLD in new-STA prints 709d46da73da wlantest: Do not claim update to AP MD MAC address if no change 770760454f9e wlantest: Do not update BSS entries for other AP MLDs in PTK cloning 084745ffc508 Add QCA vendor attributes for NDP setup bf9cbb462fd9 Fix writing of BIGTK in FT protocol 011775af9443 tests: Check for beacon loss when using beacon protection 8f148d51322f Fix a compiler warning on prototype mismatch b7db495ad9c9 AP: Fix ieee802_1x_ml_set_sta_authorized() 232667eafe0d Fix CCMP test vector issues 30771e6e05ed Include PTID in PV1 nonce construction for CCMP test vector 34841cfd9aba Minor formatting changes to CCMP test vectors a685d84139e6 BSS coloring: Fix CCA with multiple BSS bc0636841a70 wpa_supplicant: Fix configuration parsing error for tx_queue_* 2763d1d97e66 hostapd: Fix AID assignment in multiple BSSID 763a19286e2f AP: Add configuration option to specify the desired MLD address bd209633eb10 AP: Use is_zero_ether_addr() to check if BSSID is NULL bc0268d053b4 wlantest: Guess SAE/OWE group from EAPOL-Key length mismatch a94ba5322803 EHT: Support puncturing for 320 MHz channel bandwidth 7e1f5c44c97e EHT: 320 MHz DFS support 6f293b32112a QCA vendor attributes for updating roaming AP BSSID info 5856373554eb Extend QCA vendor command to include more parameters for netdev events e080930aa0a5 Define QCA vendor roam control RSSI attributes fe72afe713ad Define QCA vendor attribute for high RSSI roam trigger threshold 47a65ccbfde2 P2P: Clean wpa_s->last_ssid when removing a temporary group network 884125ab7d21 tests: P2P autonomous GO and clearing of networking information 7637d0f25053 P2P: Do not filter pref_freq_list if the driver does not provide one dd1330b502ff Fix hostapd interface cleanup with multiple interfaces 0a6842d5030e nl80211: Fix beacon rate configuration for legacy rates 36, 48, 54 Mbps d606efe054d5 tests: Beacon rate configuration for 54 Mbps f91d10c0e6aa tests: Update RSA 3k certificates 07d3c1177bbb tests: Make sae_proto_hostapd_status_* more robust 1085e3bdc6f6 Update iface->current_mode when fetching new hw_features 338a78846b44 Add a QCA vendor sub command for transmit latency statistics 9318db7c38bc wlantest: Use local variables for AA/SPA in FT Request/Response processing 628b9f10223d wlantest: Derive PMK-R1 and PTK using AA/SPA for MLO FT over-the-DS 104aa291e5c8 wlantest: Fix FT over-the-DS decryption 37c87efecfe3 wlantest: Search SPA using MLO aware find for FT Request/Response frame 19f33d7929e8 wlantest: Learn the Link ID for AP MLD affiliated BSSs 6ae43bb10323 wlantest: Learn link address for assoc link from (Re)Association Request 4c079dcc64da Increment hmac_sha*_vector() maximum num_elem value to 25 e6f64a8e1daf FT: FTE MIC calculation for MLO Reassociation Request frame a83575df5994 wlantest: FTE MIC calculation for MLO Reassociation Request frames ff02f734baf8 wlantest: Allow specific link BSS to be found with bss_find_mld() 7381c60db8f0 FT: Make FTE MIC calculation more flexible ac9bf1cc2a4c Decrement hmac_sha*_vector() maximum num_elem value to 11 aa08d9d76803 Fix use of defragmented FTE information 78b153f90a74 Calculate defragmented FTE length during IE parsing 8cf919ffd5c4 wlantest: FTE MIC calculation for MLO Reassociation Response frame d12a3dce82a9 wlantest: Store and check SNonce/ANonce for FT Authentication 20febfd7838d wlantest: Dump MLO association information in debug 609864d6a8a1 Add QCA vendor attribute to configure MLD ID in ML probe request 12154861e24a Add support for conversion to little endian for 24 bits c437665041c0 Add Non EHT SCS Capability in (Re)Association Request frames 33da386553b7 SCS: Add support for QoS Characteristics in SCS request edfca280cbe8 SCS: Add support for optional QoS Charateristics parameters 32dcec9529ec Send actual MFP configuration when driver takes care of BSS selection 123d16d860fa Update hw_mode when CSA finishes b3d852560bda Change QCA vendor configure attribution name of peer MAC address 12fabc4765c2 Add QCA vendor attribute for configuring max A-MPDU aggregation count f6eaa7b729cb Add QCA vendor attribute for TTLM negotiation support type f6dcd326fea7 wlantest: Indicate ToDS/FromDS values for BSS DATA entries 6ce745bb87d4 wlantest: MLO support for decrypting 4-address frames 850dc1482953 wlantest: Remove duplicated A1/A2/A3 override detection for MLO 770e5a808fbb wlantest: Determine whether A1 points to STA once in rx_data_bss_prot() 377d617b574a Define new BSS command info mask for AP MLD address d3ab6e001f62 wlantest: Use non-AP MLD's MLD MAC address in FT over-the-air derivation a845601ffe32 wlantest: Derive PTK in MLO using MLD MAC addresses for FT over-the-air 0cd2bfc8a402 wlantest: Fix FTE MIC calculation for MLO Reassociation Response frames 528abdeb673b wlantest: Learn group keys from MLO FT Reassociation Response frames 990600753dd9 wlantest: Defragment Basic MLE before processing de043ec01ab5 wlantest: Defragment the Per-STA Profile subelement bae1ec693c44 wlantest: Minimal parsing of Basic MLE STA Profile ba1579f3bf7c Clear BIGTK values from wpa_supplicant state machine when not needed b46c4b9a916a tests: Beacon protection and reconnection 3e71516936b7 Document per-ESS MAC address (mac_addr=3 and mac_value) f85b2b2dee3b Extend wpa_parse_kde_ies() to include EHT capabilities e3a68081bc1e driver: Add option for link ID to be specified for send_tdls_mgmt() c7561502f2e8 nl80211: Use a QCA vendor command to set the link for TDLS Discovery Response a41c8dbdd84e TDLS: Copy peer's EHT capabilities 626501434be1 TDLS: Learn MLD link ID from TDLS Discovery Response 5f30f62eead7 TDLS: Reply to Discovery Request on the link with matching BSSID 940ef9a05c0f TDLS: Use link-specific BSSID instead of sm->bssid for MLO cases f429064189c3 TDLS: Set EHT/MLO information for TDLS STA into the driver dd25885a9daa Remove space-before-tab in QCA vendor related definitions af6e0306b2a9 Fix typos in QCA vendor related definitions 4c9af238c1e4 Fix inconsistent whitespace use in QCA vendor related definitions e5ccbfc69ecf Split long comment lines in QCA vendor related definitions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: rework reload support and MAC address handlingFelix Fietkau2023-09-13
| | | | | | | | | | | | | | | MAC address and interface name assigned by mac80211.sh depend on the order in which interfaces are brought up. This order changes when interfaces get added or removed, which can cause unnecessary reload churn. One part of the fix it making MAC address allocation more dynamic in both wpa_supplicant and hostapd, by ignoring the provided MAC address using the next available one, whenever the config does not explicitly specify one. The other part is making use of support for renaming netdevs at runtime and preserving the MAC address for renamed netdevs. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: move mac address allocation from mac80211.sh to wdev.ucFelix Fietkau2023-09-13
| | | | | | Preparation for upcoming hostapd reload improvements Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add internal API for renaming AP interfacesFelix Fietkau2023-09-13
| | | | | | Will be used for improving reload support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix AP+STA configuration with autochannel enabledFelix Fietkau2023-09-13
| | | | | | | Properly disable the interface when requested Disable ACS when bringing it back up on the new channel Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update interface/bss list after set_config callsFelix Fietkau2023-09-13
| | | | | | | set_config causes the ucode bss resource to be re-created and because of that the bss list needs to be updated as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix bringing up AP in AP+mesh configurationsFelix Fietkau2023-09-12
| | | | | | Pass the correct frequency + secondary channel offset to hostapd Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: clear ucode interface/bss resource pointersFelix Fietkau2023-09-12
| | | | | | Avoids potential use-after-free bugs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix applying gratuitous ARP settings with bridge-vlanFelix Fietkau2023-09-12
| | | | | | The arp_accept setting needs to be applied to the snoop_iface Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Themed by Ted Yin.