aboutsummaryrefslogtreecommitdiff
path: root/package/kernel/linux/modules/netdevices.mk
Commit message (Collapse)AuthorAge
...
* kernel: modules: fix kmod-mdio-devres dependency for 5.15Petr Štetiar2022-03-29
| | | | | | | | | | | | | | | Fixes following build issues: Package kmod-r8169 is missing dependencies for the following libraries: mdio_devres.ko Package kmod-ixgbe is missing dependencies for the following libraries: mdio_devres.ko Package kmod-amd-xgbe is missing dependencies for the following libraries: mdio_devres.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: provide kmod-fixed-phy as separate kmodChristian Lamparter2022-01-08
| | | | | | | | | | Almost all targets have the fixed-phy feature built into the kernel. One big exception is x86. This caused a problem with the upcoming LAN78xx usb driver. Hence this patch breaks out the fixed-phy from of_mdio (which didn't include the .ko) and puts into a separate module. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add kmod-phy-microchipChristian Lamparter2022-01-08
| | | | | | | | phy drivers for Microchip's LAN88xx PHYs. This is needed for the "LAN7801" variant of the upstream lan78xx usb ethernet driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add missing symbol to kmod-qlcnicStijn Tintel2021-07-23
| | | | | | | | When the kmod-qlcnic package is built on targets that have CONFIG_PCI_IOV enabled, the CONFIG_QLCNIC_SRIOV symbol is exposed. Enable this symbol in the kmod package to fix its build. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel/modules: make sure igb loads at bootChris Blake2021-06-21
| | | | | | | | | | Without loading the igb at boot, the recovery wouldn't have network available. All network drivers should be loaded before etc/board.d/02_network is called. Note that other network drivers already have this set, such as tg3. Fixes: 7e0e5110bc90 ("kernel: add igb kernel module") Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* kernel: qlcnic: fix typo in module descriptionChukun Pan2021-05-01
| | | | | Fixes: f88c64d28ccf ("kernel: netdev: add qlcnic") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: qlcnic: add dependency to kmod-hwmon-coreHauke Mehrtens2021-05-01
| | | | | | | | | QLCNIC_HWMON was activated when hwmon was set, but the dependency was missing. This broke the build bot builds. Fix this by explicitly activating HWMON support and adding a dependency. Fixes: f88c64d28ccf ("kernel: netdev: add qlcnic") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netdev: add qlcnicVieno Hakkerinen2021-05-01
| | | | | | Add driver for QLogic QLE8240 and QLE8242 Converged Ethernet devices. Signed-off-by: Vieno Hakkerinen <vieno@hakkerinen.eu>
* kernel: add kmod-ipvlan supportChen Minqiang2021-04-30
| | | | | | | | | | | | This kmod is similar to macvlan with the difference being that the endpoints have the same mac address. It is useful on cloud where only one mac address allowed on port, where macvlan not works but ipvlan would. One use case is where multiple IPs and gateways assign on one net port Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* kernel: netdev: make kmod-of-mdio conflict with x86David Bauer2021-04-18
| | | | | | | | CONFIG_MDIO_OF depends on CONFIG_OF which is not enabled for x86. Fixes builds of x86 with Kernel 5.10 due to unresolved dependencies. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: 5.10: add missing dependency in kmod-mdio-devresTony Ambardar2021-03-19
| | | | | | | | | | | | Add conditional dependency on kmod-of-mdio due to mdio_devres.c code: #if IS_ENABLED(CONFIG_OF_MDIO) ... EXPORT_SYMBOL(devm_of_mdiobus_register); #endif /* CONFIG_OF_MDIO */ Fixes: 95a3741d17 ("kernel: support new mdio_devres.ko module in 5.10") Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: support new mdio_devres.ko module in 5.10Tony Ambardar2021-03-14
| | | | | | | | | Add kmod-mdio-devres package and kernel config symbol, and update related kmod-r8169 and kmod-ixgbe package dependencies. Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: 5.10: fix kmod build failuresIlya Lipnitskiy2021-02-23
| | | | | | | | | | Modify existing modules to reflect their new location in Linux 5.10. Add missing dependenices. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> [enable CRYPTO_USER_API_ENABLE_OBSOLETE; add kmod-crypto-hash dependency to usb-net-rtl8152] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add linux 5.10 supportFelix Fietkau2021-02-16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: sfc,sfc-falcon: fix kernel config symbolsPetr Štetiar2020-11-27
| | | | | | | | I've just noticed on i.mx6 target, that there are missing kernel symbols so I'm fixing it. Fixes: 3c5d70ad26ed ("kernel: add module support Solarflare network adapter") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: remove mvsw61xx swconfig driverDENG Qingfang2020-11-16
| | | | | | | All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA driver, so it can be removed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kernel: add module support Solarflare network adapterTan Zien2020-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Solarflare user guide it is recommended to install lm-sensors and use the following command to obtain adapter health info $ sensors | grep sfc sfc pci 0400 sfc pci 0401 $ sensors sfc pci 0400 sfc pci 0400 Adapter: PCI adapter 1.2V supply: N/A 3.3V supply: +3.22 V (min = +3.00 V, max = +3.60 V) 12.0V supply: +12.14 V (min = +11.04 V, max = +12.96 V) 0.9V supply (ext. ADC): +1.03 V (min = +0.50 V, max = +1.10 V) (crit max = +1.15 V) 0.9V phase A supply: N/A PHY overcurrent: N/A ERROR: Can't get value of subfeature temp1_alarm: Can't read PHY temp.: N/A AOE FPGA temp.: +68.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Ambient temp.: +56.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Controller die (TDIODE) temp.: +77.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Board front temp.: +59.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Board back temp.: +62.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) 1.2V supply current: N/A 0.9V phase A supply current: N/A 3.3V supply current: N/A 12V supply current: N/A Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* kernel: remove obsolete kernel version switches for 4.19Adrian Schmutzler2020-10-30
| | | | | | | This removes switches dependent on kernel version 4.19 as well as several packages/modules selected only for that version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: add module support Intel Ethernet Controller I225 SeriesTan Zien2020-09-18
| | | | | | add kernel module igc support Intel Ethernet Controller I225 Series. Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* kernel: remove obsolete kernel version switches for 4.14Adrian Schmutzler2020-09-02
| | | | | | | | | | This removes switches dependent on kernel version 4.14 as well as several packages/modules selected only for that version. This also removes sched-cake-virtual, which is not required anymore now that we have only one variant of cake. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* samsung: drop targetAdrian Schmutzler2020-09-02
| | | | | | | | | This target is still on kernel 4.14, and no attempt has been made to update it to a newer kernel. Since we already are two LTS versions ahead of that the target is dropped, as the chance of somebody bumping it will only decrease with time. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: support intel X7xx 10/40GbE adaptersXiaobo Tian2020-04-26
| | | | | | Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com> [Add i40evf/i40evf.ko and setect CONFIG_IAVF] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netdev: fix kmod-sfp symbolsDavid Bauer2020-04-26
| | | | | | Fixes: ec2f7a47d379 ("kernel: add module to support SFP cages") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: fix kmod-sfp description capitalizationDavid Bauer2020-04-26
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: add phylink dependency for sfpDavid Bauer2020-04-26
| | | | | | Fixes: ec2f7a47d379 ("kernel: add module to support SFP cages") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: add kmod-phylinkDavid Bauer2020-04-26
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add module to support SFP cagesRené van Dorst2020-04-25
| | | | | | Enables kernel SFP case support. Signed-off-by: René van Dorst <opensource@vdorst.com>
* kernel: netdev: add missing config for mlx5 driverTan Zien2020-04-06
| | | | | | | | | | | The mlk5 kmod lacks all necessary build symbols for kernel 4.14 (again). Add missing symbols to avoid build failure on these targets. Signed-off-by: Tan Zien <nabsdh9@gmail.com> [rewrite commit message - reorder symbols] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: Fix miss config and module for mlx driverTan Zien2020-04-04
| | | | | | | | | Missing config symbols could lead to build failures on kernel 4.14/4.19. Signed-off-by: Tan Zien <nabsdh9@gmail.com> [rephrase commit message - reorder symbols] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add module for Mellanox mlx Network DriverTan Zien2020-04-03
| | | | | | | | add module to support Mellanox Connect-X card mlx4 supports ConnectX-3 series and previous cards mlx5 supports Connect-IB/ConnectX-4 series and later cards Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* kernel: load rtl8366_smi and rtl8367b on bootLuiz Angelo Daros de Luca2020-03-21
| | | | | | | | | This external switch driver should be loaded on boot for network support in failsafe mode. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> [alter commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: ifb: set default numifbs to 0Kevin Darbyshire-Bryant2020-03-13
| | | | | | | | | | | | By default on module load, 2 ifb interfaces are created and typically remain unused, cluttering 'ip link' outputs and generally confusing things. sqm-scripts for example, creates its own ifb interface/s instead of using these 2 defaults ifbs. Tell the ifb module to not create any default ifbs on load via the numifbs parameter. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: Make kmod-ixgbe depend on kmod-libphyHauke Mehrtens2020-02-28
| | | | | | | With kernel 5.4 kmod-ixgbe is depending on kmod-libphy, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove kmod-gigaset for kernel 5.4Hauke Mehrtens2020-02-28
| | | | | | | gigaset was moved to staging in kernel 5.4, just deactivate it on recent kernel versions instead of adapting it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm2708: rename target to bcm27xxAdrian Schmutzler2020-02-14
| | | | | | | | | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm47xx: rename target to bcm47xxAdrian Schmutzler2020-02-14
| | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: fix typos in KernelPackage descriptionSungbo Eo2020-02-08
| | | | | | | | | | | | Fixes: ed2839ac4190 ("kernel/modules: add kmod-pmbus-zl6100 module") Fixes: bbcb9de93547 ("Add package for gpio rotary encoder") Fixes: 76854589829a ("package/kernel: package kmod-input-matrixkmap") Fixes: 8bfef353850a ("kernel: rename kmod-switch-rtl8366_smi to kmod-switch-rtl8366-smi to avoid underscores in package names") Fixes: f03bf608b151 ("kernel: Add dummy sound driver") Fixes: dda5d9b78643 ("ramips: rename pwm kernel module") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: use older kernel for explicitly setting dependenciesAdrian Schmutzler2020-01-26
| | | | | | | | | | | | It is generally more desirable to use older kernel versions for dependencies, as this will require less changes when newer kernels are added (they will by default select the newer packages). Since we currently only have two kernels (4.14 and 4.19) in master, this patch applies this logic by converting all LINUX_4_19 symbols to their inverted LINUX_4_14 equivalents. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: add SFP support for Methode DM7052 NBASE-T moduleRussell King2020-01-21
| | | | | | | | | | Add support for Methode DM7052 NBASE-T module to OpenWRT. These patches are taken from my "phy" branch, and will be sent for the next kernel merge window. Signed-off-by: Russell King <linux@armlinux.org.uk> [jonas.gorski: move patches to pending, refresh patches] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* kernel: remove obsolete kernel version switchesAdrian Schmutzler2020-01-12
| | | | | | | | | After kernel 4.9 has been removed, this removes all (now obsolete) kernel version switches that deal with versions before 4.14. Package kmod-crypto-iv is empty now and thus removed entirely. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: add kmod packages for Broadcom bcm53xxx switch supportTobias Schramm2020-01-12
| | | | Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* kernel: add module for Emulex OneConnect 10GbitAlberto Bursi2019-09-19
| | | | | | | | add module to support Emulex OneConnect common in 10Gbit SFP+ cards by Dell/HP/IBM supports OneConnect OCe10xxx OCe11xxx OCe14xxx, LightPulse LPe12xxx Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* kernel: alx driver for AR816x/AR817x EthernetStefan Lippers-Hollmann2019-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These ethernet cards can be found onboard various x86 and x86_64 Gigabyte mainboards since the sandy-bridge/ ivy-bridge era. This driver supports the following QCA/"Killer" ethernet cards: 1969:1091 - AR8161 Gigabit Ethernet 1969:1090 - AR8162 Fast Ethernet 1969:10A1 - AR8171 Gigabit Ethernet 1969:10A0 - AR8172 Fast Ethernet 1969:E091 - Killer E2200 Gigabit Ethernet 1969:E0A1 - Killer E2400 Gigabit Ethernet 1969:E0B1 - Killer E2500 Gigabit Ethernet Successfully runtime tested with the onboard ethernet card of a Gigabyte GA-H77M-D3H ivy-bridge mainboard (x86_64/EFI image): 02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 [...] Subsystem: Gigabyte Technology Co., Ltd AR8161 [...] Kernel driver in use: alx Kernel modules: alx alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [...] alx 0000:02:00.0 eth0: NIC Up: 1 Gbps Full Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [fix typo, shorten subject to <50 characters, shorten lines to <76 chars.]
* kernel: package Broadcom BNX2X driverPetko Bordjukov2019-06-20
| | | | | | | | | | bnx2x driver support for the x86 architecture. Includes module and firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet adapters. Signed-off-by: Petko Bordjukov <bordjukov@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added +kmod-lib-zlib-inflate as well]
* kernel: Remove support for kernel 3.18Hauke Mehrtens2019-05-03
| | | | | | | | | | No target is using kernel 3.18 anymore, remove all the generic support for kernel 3.18. The removed packages are depending on kernel 3.18 only and are not used on any recent kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tegra: add new targetTomasz Maciej Nowak2019-04-06
| | | | | | | | | | New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: tg3: Do not depend on kmod-hwmon-core on kernel 4.19Hauke Mehrtens2018-12-15
| | | | | | Like on kernel 4.14 this dependency is deactivated in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add kmod-phy-realtekHauke Mehrtens2018-12-15
| | | | | | | | The r8169 driver uses the phy lib with the realtek phy driver in kernel 4.19 instead of integrating the phy driver into the mac driver. Add the new phy driver and add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* samsung: Add missing dependencies to kmod-of-mdioHauke Mehrtens2018-09-29
| | | | | | | The samsung target builds of_mdio.ko as a module, add the needed dependency to it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: insmod phy-broadcom module during preinitSteffen Förster2018-07-16
| | | | | | | | | Some HP Thin clients use the broadcom nextreme chip as integrated NIC. It is connected via PCI express and will only be found automatically if phy-broadcom is loaded before tg3. This small change makes the thin client usable for Freifunk with gluon out of the box. Signed-off-by: Steffen Förster <steffen@chemnitz.freifunk.net>
Powered by cgit, Themed by Ted Yin.