aboutsummaryrefslogtreecommitdiff
path: root/package/boot/uboot-mediatek/Makefile
Commit message (Collapse)AuthorAge
* uboot-mediatek: fix extraneous right parensPetr Štetiar2022-09-13
| | | | | | | | Fixes following warning: Makefile:310: extraneous text after 'ifeq' directive Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-mediatek: add support for Bananapi BPi-R3Daniel Golle2022-08-30
| | | | | | | | | | | | | | | The Bananapi BPi-R3 board can boot from eMMC, SD card, SPI-NAND and SPI-NOR, depending on the position of switches controlling the BOOTSEL bootstrap pins as we as hard-wired chip-select lines. The position of the chip-select switch SW6 decides whether either SD card or eMMC can be accessed, SW5 selects either SPI-NAND or SPI-NOR. Generate U-Boot for all 4 boot options. The SD card version allows installation to SPI-NAND and SPI-NOR (eMMC cannot be accessed simultanously with the SD card), the SPI-NAND version allows installation to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add support for MT798x platformsDaniel Golle2022-08-28
| | | | | | Import pending patches to support the upcoming Filogic platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add support for compressed BL3/FIP imageDaniel Golle2022-08-28
| | | | | | | MediaTek's ARM Trusted Firmware v2.7+ allows the images inside a FIP structure to be compressed. Make use of that for boards with NOR flash. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: mt7621: use silent stage1 by defaultDaniel Golle2022-08-11
| | | | | | | Use faster and silent MT7621 stage1 blob by default unless CONFIG_DEBUG is selected. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: unbreak build with binmanDaniel Golle2022-07-13
| | | | | | | | | swig has been installed on the buildbots a while a ago and Petr Štetiar got a fix for the pylibfdt error. Use that and re-enable the builds for mt7620 and mt7621. Refresh patches while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: mark mt7620 build as @BROKENDaniel Golle2022-07-12
| | | | | | Turns out also mt7620 build has a more hidden dependency on binman. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: mark MT7621 variants as @BROKENDaniel Golle2022-07-12
| | | | | | | | | | Building U-Boot for the MT7621 SoC requires binman, a Python-based host tool to generate images. For now, binman cannot work inside the OpenWrt build system because it requires swig, so mark the MT7621 boards as borken to fix the ramips/mt7621 build until someone with knowledge about Python and swig fixes the underlaying issue. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-ramips: add support for MT7621, merge into uboot-mediatekDaniel Golle2022-07-11
| | | | | | | | | | | | * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to 2022.07 releaseDaniel Golle2022-07-11
| | | | | | | | | | | Add patch to fix host-build of the mkimage tool without CONFIG_TOOLS_LIBCRYPTO. Update and refresh all patches. Tested on BananaPi R64 (MT7622) successfully booting from SD card, eMMC and SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update UniFi 6 LR board nameDaniel Golle2022-06-16
| | | | | | | Select matching U-Boot for both v1 and v2 variants. Fixes: 15a02471bb ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to version 2022.01Daniel Golle2022-01-23
| | | | | | | Tested on BananaPi R2 (SD, eMMC), BananaPi R64 (SD, eMMC, SPI-NAND) and UniElec U7623-02 (eMMC). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update build for the U7623-02 boardDaniel Golle2022-01-23
| | | | | | | Brings bootmenu and production/recovery dual-boot scheme like on the BPi-R2, BPi-R64, E8450 and UniFi 6 LR. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* u-boot.mk: fix pkg-config usageAndre Heider2021-10-24
| | | | | | | | Using Host/Exports doesn't work as intended, explicitly add the required vars so that u-boot finds the required libraries when building its tools. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mediatek: update to 2021.10Daniel Golle2021-10-04
| | | | | | | | | | | U-Boot 2021.10 has been released. Rebase mediatek patches on top of new release and remove some patches which have been merged upstream. Tested on Bananapi BPi-R2 (mt7623), Bananapi BPi-R64 (mt7622) and Linksys E8450 (mt7622). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix board name of Bananapi BPi-R2Daniel Golle2021-07-20
| | | | | | | | As the board name was changed to be identical to the device tree compatible string (just like for other boards), also reflect that change for U-Boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add spi-nand build for bananapi bpi-r64Daniel Golle2021-04-11
| | | | | | | | Some of bpi-r64 boards have serial NAND attached to SPI bus. Build U-Boot for booting from SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LRDaniel Golle2021-04-09
| | | | | | | | | | | | | | | | Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to v2021.04Daniel Golle2021-04-05
| | | | | | | | | | Remove patches merged upstream and refresh the remaining ones. Runtime tested on * Bananapi BPi-R64 (eMMC and SD Card) * Linksys E8450 (SPI-NAND) * Ubiquiti UniFi 6 LR (SPI-NOR) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: select matching U-Boot for boardDaniel Golle2021-03-14
| | | | | | | Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to 2021.04-rc3 with MediaTek's patchesDaniel Golle2021-03-11
| | | | | | | | | | | | | | MediaTek published their current U-Boot patchset on github: https://github.com/mtk-openwrt/u-boot/commits/mtksoc Import the platform patches from there (`00-mtk-*.patch`), arrange, them nicely, drop no longer needed local patches and rebase on top of U-Boot 2021.04-rc3. Tested and works well on Linksys E8450 (snand-1ddr) as well as Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: rework support for Bananapi BPi-R64 boardDaniel Golle2021-02-28
| | | | | | | | | | | | | | Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add support for Linksys E8450Daniel Golle2021-02-28
| | | | | | | | | | | | | | | | | | | | | Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: update uboot to latest patchset provided by MTKJohn Crispin2020-11-04
| | | | | | MTK sent us their latest version of the staging uboot. Lets merge the patches. Signed-off-by: John Crispin <john@phrozen.org>
* uboot-mediatek: update to latest versionJohn Crispin2020-09-01
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: add U-Boot build for UniElec U7623David Woodhouse2020-07-26
| | | | | | | | | Patches submitted upstream at https://patchwork.ozlabs.org/project/uboot/list/?series=189178 Tested on Banana Pi R2 and U7623-06. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* uboot-mediatek: remove swig requirementRosen Penev2020-07-23
| | | | | | | | | Ever since this package was introduced, the SDK for mt7629 failed to build as it started failing on this package. Fixed by porting Hauke's similar patch for uboot-sunxi to uboot-mediatek. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mediatek: add mt7623 u-boot build for Banana Pi R2David Woodhouse2020-07-08
| | | | | | | For building full SD/eMMC images for Banana Pi R2 we'll want a u-boot image built for that platform. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mediatek: add ubootJohn Crispin2020-05-04
Signed-off-by: John Crispin <john@phrozen.org>
Powered by cgit, Themed by Ted Yin.