aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* hostapd: add ucode support, use ucode for the main ubus objectFelix Fietkau2023-08-01
| | | | | | | | This implements vastly improved dynamic configuration reload support. It can handle configuration changes on individual wifi interfaces, as well as adding/removing interfaces. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: switch to using uloop (integrated with built-in eloop)Felix Fietkau2023-08-01
| | | | | | Preparation for pulling in more code that uses uloop Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for querying assoc/probe IEsFelix Fietkau2023-08-01
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add experimental radius serverFelix Fietkau2023-08-01
| | | | | | | | This can be used to run a standalone EAP server that can be used from other APs. It uses json as user database format and can automatically handle reload. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01862Michał Kwiatek2023-07-31
| | | | | | | | | | | | Changelog from quic: Bug fixes, stability improvements from previous releases are present. There are no backward comatibility issues with this release. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600 Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
* uboot-mediatek: fix build for MT7629Daniel Golle2023-07-31
| | | | | | | | Add patch to fix build failure caused by a missing header which had previously been implicitely included. Fixes: 6ddb5f5a65 ("uboot-mediatek: update to version 2023.07.02") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: enable driver for MediaTek XS-PHYDaniel Golle2023-07-31
| | | | | | | Enable driver for MediaTek SuperSpeedPlus XS-PHY transceiver for the USB3.1 GEN2 controllers found in the MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add missing 'memory' nodes to downstream boardsDaniel Golle2023-07-31
| | | | | | | | | | Among the patches adding support for MT7988 also came the switch to use fdtdec_setup_mem_size_base() and no longer rely on CFG_SYS_SDRAM_BASE. Take care of our downstream boards which did not have a 'memory' node in their device trees. Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qualcommax: ipq807x: fix Gen2 PCIe portRobert Marko2023-07-31
| | | | | | | | | | | | | | Gen2 PCIe port recently got broken on IPQ807x during update to 6.1.39 as upstream backported: ("PCI: qcom: Remove PCIE20_ prefix from register definitions") [1] So, fix it by adding a pending upstream fix for it [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/pci/controller/dwc/pcie-qcom.c?h=v6.1.39&id=db962c7a711c3393a80a18219960cd54fb33c53d [2] https://patchwork.kernel.org/project/linux-arm-msm/patch/20230724063429.3980462-1-quic_srichara@quicinc.com/ Fixes: fec22f8375b4 ("kernel: bump 6.1 to 6.1.39") Signed-off-by: Robert Marko <robimarko@gmail.com>
* arm-trusted-firmware-mediatek: fix PKG_MIRROR_HASHDaniel Golle2023-07-31
| | | | | | | | | | Instead of using the hash of the Github-generated tarball use the hash of the tarball generated by the OpenWrt build system (in this case they are different, unfortunately). Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: 07dbeb430e ("arm-trusted-firmware-mediatek: update to sources of 2023-07-24") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 6.1 to 6.1.42John Audia2023-07-30
| | | | | | | | | | | | | | | Manually rebased: generic/pending-6.1/203-kallsyms_uncompressed.patch All other patches automatically rebased. Changelog: https://lore.kernel.org/stable/2023072749-gumming-selector-a081@gregkh/ Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: netsupport: Add kmod-sched-skbprioAlexandru Gagniuc2023-07-30
| | | | | | | | Add support for the SKBPRIO queuing discipline. This is subtly different than prio as it also drops packets from the lower priority flows. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
* kernel: bump 5.15 to 5.15.123John Audia2023-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*] Removed upstreamed: backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2] pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3] pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4] bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5] bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499 Build system: x86/64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Audia <therealgraysky@proton.me> [rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rtl8812au-ct: fix even more compilation error with kernel 6.1Christian Marangi2023-07-30
| | | | | | | | | | | | | | | Fix more compilation error with kernel 6.1 and make it possible to compile. Multiple fix are done due to kernel bump: - PDE_DATA (now deprecated) to pde_data - dev_addr now const and require some cast - prandom_u32 (now deprecated) to get_random_u32 Also other minor fix for always true condition and tasklet type cast not compatible. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: mt7621-wdt: use phandle to access system controller registersShiji Yang2023-07-30
| | | | | | | | | | | | | These patches allow the driver to access some watchdog registers via a phandle to the system controller node[1]. To apply these changes, we need to add "mediatek,sysctl" to the SoC dtsi. This commit also remove the redundent clocks, interrupts and resets properties. [1] https://lore.kernel.org/all/20230214103936.1061078-2-sergio.paracuellos@gmail.com Tested on Motorola MWR03 (MT7628) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for legacy SoCsShiji Yang2023-07-30
| | | | | | | | | | | | | | | | | | | | This series of upstream patches properly implement a clock and reset driver for old ralink SoCs[1]. And it includes some related fixes[2] and improvements[3][4]. All patches have been merged into linux-next. They will be part of upcoming Linux 6.5. In order to switch to the new system controller driver, all clocks and resets properties in SoC dtsi have been updated, and kernel symbol "CONFIG_CLK_MTMIPS" have been added to the kernel config files. [1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/all/20230622-mips-ralink-clk-wuninitialized-v1-1-ea9041240d10@kernel.org [3] https://lore.kernel.org/all/OSYP286MB03120BABB25900E113ED42B7BC5CA@OSYP286MB0312.JPNP286.PROD.OUTLOOK.COM [4] https://lore.kernel.org/all/TYAP286MB03151148AF8C054621DD55C3BC23A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Tested on Motorola MWR03 (MT7628) Tested on Haier HW-L1W (MT7620) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add proper system clock and reset driver support for mt7621Shiji Yang2023-07-30
| | | | | | | | | | | | | | | | | This series of upstream patches makes the system controller node as a reset provider[1][2], and it also includes some clock and reset driver fixes[3][4]. Meanwhile, all clocks and resets properties in the SoC device tree have been updated to be compatible with the new driver. [1] https://lore.kernel.org/r/20220110114930.1406665-2-sergio.paracuellos@gmail.com [2] https://lore.kernel.org/r/20220210094859.927868-2-sergio.paracuellos@gmail.com [3] https://lore.kernel.org/r/20221217074806.3225150-1-sergio.paracuellos@gmail.com [4] https://lore.kernel.org/r/20230206083305.147582-1-sergio.paracuellos@gmail.com Tested on RAISECOM MSG1500 X.00 Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* toolchain: gcc: updat to 13.2Nick Hainke2023-07-30
| | | | | | | | | | | | | | | Release Notes: https://gcc.gnu.org/pipermail/gcc/2023-July/242148.html Remove upstreamed patches: - patches-13.x/001-rtl-optimization-109585-alias-analysis-typo.patch - patches-13.x/700-RISCV-Inline-subword-atomic-ops.patch - patches-13.x/701-riscv-linux-Don-t-add-latomic-with-pthread.patch Refresh patches: - patches-13.x/10-mbsd_multi.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* urngd: fix archived tar hashRafał Miłecki2023-07-30
| | | | | | | | | Due to some hiccup my local urngd-2023-07-25-7aefb47b.tar.xz ended up being different from archived one. Repackaging it locally confirmed the previous hash was incorrect. Fixes: c74b5e09e692 ("urngd: update to the latest master") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport proper fix for mtd preventing devices probingRafał Miłecki2023-07-30
| | | | | | | | | | Improper of_platform_populate() call caused issue with probing devices drivers. Fixes: 41e1e838fbbb ("kernel: backport mtd patch adding of_platform_populate() calls") Fixes: #10232 Ref: 79af0593a30b ("kernel: switch back 5.15 to fw_devlink=permissive") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport more DT changes queued for v6.6Rafał Miłecki2023-07-29
| | | | | | Those sort out BCM53573 Ethernet info finally. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: pinctrl: support requesting different functions for same groupShiji Yang2023-07-29
| | | | | | | | | | MT7620 wireless radio needs change the pin group function between "gpio" and "pa" during the calibration process. However, ralink pinctrl driver doesn't support requesting different functions for the same group. This patch enables pinctrl consumers to perform such operations. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mac80211: rework MT7620 PA/LNA RF calibrationShiji Yang2023-07-29
| | | | | | | | | | | | | | | This patch makes some improvements to the MT7620 RF calibration. 1. Move MT7620 PA/LNA calibration code to dedicated functions. 2. Restore RF and BBP registers before R-Calibration. 3. Do Rx DCOC calibration again before RXIQ calibration. 4. Use SoC specific AGC initial LNA value. 5. Correct MAC_RX_EN mask in rt2800_r_calibration()[1]. [1] This change may fix the "BBP/RF register access failed" error: ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* uboot-mediatek: add patches for MT7988 and builds for RFBDaniel Golle2023-07-29
| | | | | | | Import pending patches adding support for MT7988 and provide builds for the reference board for all possible boot media. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to version 2023.07.02Daniel Golle2023-07-29
| | | | | | | | | | Release 2023.07 got tagged wrongly and replaced by follow-up release 2023.07.02. Now using upstream DTS for BPi-R3. Removed two patches which made it upstream, refreshed the rest. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to sources of 2023-07-24Daniel Golle2023-07-29
| | | | | | | | Use updated Trusted Firmware-A sources from MediaTek, now stacked on top of the ARM Trusted Firmware-A v2.9 release. Add builds for the newly added MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-tools: update to version 2.9Daniel Golle2023-07-29
| | | | | | | | | | | | | | | | | | 147f52f3e feat(fiptool): add cca, core_swd, plat cert in FIP 0aaa382fe fix(sptool): fix concurrency issue for SP packages cb666b39d Merge "fix(sptool): fix concurrency issue for SP packages" into integration 0be2475f6 fix: 'sp_mk_generator.py' reference to undef var 1a28f290b fix(sptool): operators "is/is not" in sp_mk_gen.py cf2dd17dd refactor(security): add OpenSSL 1.x compatibility 4daeaf341 fix(sptool): add dependency to SP image 06e69f7c9 feat(fiptool): handle FIP in a disk partition 5a53c6c66 Merge "feat(fiptool): handle FIP in a disk partition" into integration 034a2e3ef refactor(fiptool): move plat_fiptool.mk to tools 0165ddd7c build(fiptool): add object dependency generation c89fdb4a5 Merge "refactor(fiptool): move plat_fiptool.mk to tools" into integration 1b491eead fix(tree): correct some typos Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mvebu: update to version 2023.07.02Oli Ze2023-07-29
| | | | | | | | | | | | Since 2021.07 multiple bugs were introduced that made it impossible to create a bootable target for mvebu. Those issues should be now fixed since 2023.07-rc1. References: #11661 Signed-off-by: Oli Ze <olze@trustserv.de> Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Andre Heider <a.heider@gmail.com> # espressobin-v3-v5-1gb-2cs Signed-off-by: Petr Štetiar <ynezz@true.cz> [facelift]
* ramips: use NVMEM cells with mt76 EEPROM for Netgear R6220 & WNDR3700 v5Rafał Miłecki2023-07-28
| | | | | | | This uses new upstream DT binding. It's more generic (NVMEM) compared to the old one (MTD). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: use fixed layout cell "mac-base" for Netgear WNDR3700 v5Rafał Miłecki2023-07-28
| | | | | | This drops a use of downstream "mac-address-increment". Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: replace "mac-address-ascii" with "mac-base"Rafał Miłecki2023-07-28
| | | | | | | With upstream accepted "mac-base" binding there is no need for a downstream "mac-address-ascii" workaround anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: make git sub-modules to fetch configurableKarsten Sperling2023-07-28
| | | | | | | | | | | | | Currently the git protocol downloads all submodules of the target repository. This can be unwieldy for repositories with a lot of submodules where only a subset are required in the context of the OpenWrt build. This change adds a PKG_SOURCE_SUBMODULES variable to configure this behavior. It takes a space-separated list of submodule paths, or the word "skip" to disable submodule downloads entirely. The default is to download all submodules, i.e. preserving current behavior. Signed-off-by: Karsten Sperling <ksperling@apple.com>
* mediatek: filogic: fix broken sysupgrade scriptPetr Štetiar2023-07-28
| | | | | | | | | Changes introduced in commit 54dc1cde48a4 ("mediatek: filogic: add support for Xiaomi WR30U") missed to end the case item with mandatory `;;` which lead to a broken sysupgrade. Fixes: 54dc1cde48a4 ("mediatek: filogic: add support for Xiaomi WR30U") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* toolchain: kernel-headers: remove debugging env dumpPetr Štetiar2023-07-28
| | | | | | | | | Remove debugging `env` dump left over as build environments might contain some sensitive information, which then might leak into the build logs. Fixes: 2105acbe2804 ("kernel-headers: fix compile error caused by wrong host include path when the toolchain is already built") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* toolchain: kernel-headers: fix check target for external Git treesPetr Štetiar2023-07-28
| | | | | | | | | | | | | | | | | | | | Executing following command currently fails: $ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1 ... include/kernel-version.mk:11: *** Missing kernel version/hash file for . Please create include/kernel-. Stop. So lets fix it by adding the necessary missing KERNEL_PATCHVER variable. That additional kernel-build.mk include is needed to add another set of missing variables: $ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1 ... Makefile:115: *** ERROR: Unknown pack format for file tmp/dl/. Stop. Fixes: 0765466a42f4 ("kernel: split kernel version to dedicated files") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq807x: prpl-haze: fix sysupgrade flashing from bootloaderPetr Štetiar2023-07-28
| | | | | | | | | | | | | | | | | | | | While flashing sysupgrade image from U-Boot, then the rootfs_data overlay filesystem formatting is left for the fstools during firstboot, but that wont work as mkfs.f2fs is missing in the sysupgrade image: mount_root: overlay filesystem in /dev/loop0 has not been formatted yet mount_root: no usable overlay filesystem found, using tmpfs overlay sh: mkfs.f2fs: not found Filesystem Size Used Available Use% Mounted on /dev/loop0 139.6M 46.9M 92.6M 34% /overlay Number Start (sector) End (sector) Size Code Name 20 98850 406349 150.1 MiB FFFF rootfs So lets fix it by adding f2fs support to the sysupgrade image. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: filogic: add specific layout for WR30UHank Moretti2023-07-27
| | | | | | | | | Because this device enable NMBM by default, most users use custom U-Boot with NMBM-Enabled in Chinese forums. This layout is the same as the ubootmod layout but enabling NMBM. Signed-off-by: Hank Moretti <mchank9999@gmail.com>
* mediatek: filogic: add support for Xiaomi WR30UHank Moretti2023-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: ESMT F50L1G41LB 128MB RAM: NT52B128M16JR-FL 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Mesh Power: DC 12V 1A Flash instructions: 1. Get ssh access Check this link: https://forum.openwrt.org/t/openwrt-support-for-xiaomi-ax3000ne/153769/22 2. Backup import partitions ``` dev: size erasesize name mtd1: 00100000 00020000 "BL2" mtd2: 00040000 00020000 "Nvram" mtd3: 00040000 00020000 "Bdata" mtd4: 00200000 00020000 "Factory" mtd5: 00200000 00020000 "FIP" mtd8: 02200000 00020000 "ubi" mtd9: 02200000 00020000 "ubi1" mtd12: 00040000 00020000 "KF" ``` Use these commands blow to backup your stock partitions. ``` nanddump -f /tmp/BL2.bin /dev/mtd1 nanddump -f /tmp/Nvram.bin /dev/mtd2 nanddump -f /tmp/Bdata.bin /dev/mtd3 nanddump -f /tmp/Factory.bin /dev/mtd4 nanddump -f /tmp/FIP.bin /dev/mtd5 nanddump -f /tmp/ubi.bin /dev/mtd8 nanddump -f /tmp/KF.bin /dev/mtd12 ``` Then, transfer them to your computer via scp, netcat, tftp or others and keep them in a safe place. 3. Setup Nvram Get the current stock: `cat /proc/cmdline` If you find `firmware=0` or `mtd=ubi`, use these commands: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ``` If you find `firmware=1` or `mtd=ubi1`, use these commands: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ``` 4. Flash stock-initramfs-factory.ubi If you find `firmware=0` or `mtd=ubi`: `ubiformat /dev/mtd9 -y -f /tmp/stock-initramfs-factory.ubi` If you find `firmware=1` or `mtd=ubi1`: `ubiformat /dev/mtd8 -y -f /tmp/stock-initramfs-factory.ubi` Then reboot your router, it should boot to the openwrt initramfs system now. 5. Setup uboot-env Now it will be setup automatically in upgrade process, you can skip this step. If your `fw_setenv` did not work, you need run this command: `echo "/dev/mtd1 0x0 0x10000 0x20000" > /etc/fw_env.config` Then setup uboot-env: ``` fw_setenv boot_wait on fw_setenv uart_en 1 fw_setenv flag_boot_rootfs 0 fw_setenv flag_last_success 1 fw_setenv flag_boot_success 1 fw_setenv flag_try_sys1_failed 8 fw_setenv flag_try_sys2_failed 8 fw_setenv mtdparts "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata), 2048k(factory),2048k(fip),256k(crash),256k(crash_log), 34816k(ubi),34816k(ubi1),32768k(overlay),12288k(data),256k(KF)" ``` 6. Flash stock-squashfs-sysupgrade.bin Use shell command: `sysupgrade -n /tmp/stock-squashfs-sysupgrade.bin` Or go to luci web. If you need to change to Openwrt U-Boot layout, do next. If you do not need, please ignore it. Change to OpenWrt U-Boot: 1. Flash ubootmod-initramfs-factory.ubi Check mtd partitions: `cat /proc/mtd` ``` mtd7: 00040000 00020000 "KF" mtd8: 02200000 00020000 "ubi_kernel" mtd9: 04e00000 00020000 "ubi" ``` Run following command: `ubiformat /dev/mtd8 -y -f /tmp/ubootmod-initramfs-factory.ubi` Then reboot your router, it should boot to the openwrt initramfs system now. 2. Check mtd again ``` mtd7: 00040000 00020000 "KF" mtd8: 07000000 00020000 "ubi" ``` Make sure mtd8 is ubi. 3. Install kmod-mtd-rw Run command: `opkg update && opkg install kmod-mtd-rw` Or get it in openwrt server, or build it yourself, then install it manually Then run this command: `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Clean up pstore Run Command: `rm -f /sys/fs/pstore/*` 5. Format ubi and create new ubootenv volume ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB ``` 6. (Optional) Add recovery boot feature. ``` ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/ubootmod-initramfs-recovery.itb ``` 7. Flash Openwrt U-Boot ``` mtd write /tmp/ubootmod-preloader.bin BL2 mtd write /tmp/ubootmod-bl31-uboot.fip FIP ``` 6. Flash ubootmod-squashfs-sysupgrade.itb Use shell command: `sysupgrade -n /tmp/ubootmod-squashfs-sysupgrade.itb` Or go to luci web. Now everything is done, Enjoy! Go Back to stock from Openwrt U-Boot: 1. Force flash ubootmod-initramfs-recovery.itb Use shell command: `sysupgrade -F -n /tmp/ubootmod-initramfs-recovery.itb` Or go to luci web. Then it should boot to the openwrt initramfs system now. 2. Format ubi and Nvram ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 mtd erase Nvram ``` 3. Install kmod-mtd-rw Run command: `opkg update && opkg install kmod-mtd-rw` Or get it in openwrt server, or build it yourself, then install it manually Then run this command: `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Flash stock U-Boot and ubi ``` mtd write /tmp/BL2.bin BL2 mtd write /tmp/FIP.bin FIP mtd write /tmp/ubi.bin ubi ``` Then reboot your router, waiting it finished rollback in minutes. Go Back to stock from stock layout Openwrt: Just run command: `ubiformat /dev/mtd8 -y -f /tmp/ubi.bin` Then reboot your router, waiting it finished rollback in minutes. Notes: 1. Openwrt U-Boot and ubootmod openwrt did not enable NMBM. Please make your backup safe. Signed-off-by: Hank Moretti <mchank9999@gmail.com>
* uboot-mediatek: add support for Xiaomi WR30UHank Moretti2023-07-27
| | | | | | Add a custom uboot build to support openwrt uboot layout. Signed-off-by: Hank Moretti <mchank9999@gmail.com>
* procd: improve status reporting for partially running servicesJo-Philipp Wich2023-07-27
| | | | | | | | | | | | | | | | The existing implementation incorrectly reported `running` for services without any instances or with all instances stopped/terminated. Improve the default implementation of `/etc/init.d/* status` to properly report services with not running instances. In case a service exists, but without running instance, the status call will now report "not running" with exit code 5. In case some instances are running and some are stopped/terminated, the call will report "running (X/Y)" where `X` denoted the amount of running instances and `Y` the amount of total registered ones. Ref: https://forum.openwrt.org/t/x/159443 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* libnl-tiny: update to latest Git HEADJo-Philipp Wich2023-07-27
| | | | | | | | | | | 8667347 build: allow passing SOVERSION value for dynamic library Also adjust packaging of the library to only ship the SOVERSION suffixed library object, to allow for concurrent installation of ABI-incompible versions in the future. Fixes: #13082 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* .gitignore: ignore link if target is included from feedFlorian Eckert2023-07-26
| | | | | | | If an out of tree target is included via a feed, then there is a link with the name 'feed' in the target directory. Do not show this link in git. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel: bump 6.1 to 6.1.41John Audia2023-07-26
| | | | | | | | | | No patches modified; just refresh checksums. Build system: x86/64 Build-tested: x86/64 Run-tested: x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* ugps: update to latest HEAD, introduce baudrateArne Zachlod2023-07-26
| | | | | | | | | | | 350b960 add support for multi GNSS solutions fb87d0f ugps: add baud rate command line option a8171a0 main.c: -S does not take any options Build-tested: ramips/ltap-2hnd Run-tested: ramips/ltap-2hnd Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* dropbear: add ed25519 for failsafe keyEtienne Champetier2023-07-26
| | | | | | | | | | | At least Fedora and RHEL 9 set RSAMinSize=2048, so when trying to use failsafe, we get 'Bad server host key: Invalid key length' To workaround the issue, we can use: ssh -o RSAMinSize=1024 ... Generating 2048 bits RSA is extremely slow, so add ed25519. We keep RSA 1024 to be as compatible as possible. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* ipq4019: fix support for AVM FRITZ!Repeater 3000Alexander Friese2023-07-26
| | | | | | | | new versions of the device have NAND with 8bit ECC which was not yet supported before. This change removes ECC restrictions. Signed-off-by: Alexander Friese <af944580@googlemail.com>
* kernel: Autoload nvme at preinit timeLuca Barbato2023-07-26
| | | | | This way is possible to mount nvme extroots. Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* rockchip: enable wifi support for NanoPC T4Lu jicong2023-07-26
| | | | | | wifi module: AP6356S (BCM4356) SDIO Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* linux-firmware: broadcom: package bcm4356 NVRAM for NanoPC T4Lu jicong2023-07-26
| | | | | | Prepare for NanoPC T4 WIFI support. Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* rockchip: add FriendlyARM NanoPC T4 supportLu jicong2023-07-26
| | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com>
Powered by cgit, Themed by Ted Yin.