aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* generic: 6.1: add even more missing Kconfig for video-coreChristian Marangi2024-02-04
| | | | | | | | Add even more missing Kconfig for video-core introduced by recent fixup to video kmods. Fixes: 76b0d24157f2 ("kernel: modules: video: fix video-core for 6.1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add patch fixing bugs with LED netdev triggerChristian Marangi2024-02-04
| | | | | | | | | Backport one patch merged upstream that prevent a deadlock for LED netdev trigger and add a pending patch that fix kernel panic on interface rename trigger notification with invalid dev. Fixes: #14477 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add missing Kconfig for video-coreChristian Marangi2024-02-03
| | | | | | | | Add missing Kconfig for video-core introduced by recent fixup to video kmods. Fixes: 76b0d24157f2 ("kernel: modules: video: fix video-core for 6.1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: replace ipq40xx MDIO patch with upstream versionChristian Marangi2024-02-03
| | | | | | | Replace ipq40xx MDIO patch with upstream version now that the driver part got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport LED fixes for qca808x PHYChristian Marangi2024-02-03
| | | | | | Backport LED fixes for qca808x PHY to restore correct functionality. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mt76: update to Git HEAD (2024-02-03)Felix Fietkau2024-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a9693e1979c2 linux-firmware: add firmware for MT7996 0258dc90e3a1 wifi: mt76: mt7603: fix reading target power from eeprom 3e81173d9e2b wifi: mt76: mt7603: initialize chainmask 786a339bac36 wifi: mt76: mt7996: fix fortify warning bc37a7ebc267 wifi: mt76: mt7996: fix fw loading timeout 027bab6a88a3 wifi: mt76: usb: create a dedicated queue for psd traffic e8909c610c3b wifi: mt76: usb: store usb endpoint in mt76_queue 8b3d96fa4ead wifi: mt76: mt792xu: enable dmashdl support 7864d7ad0ed0 wifi: mt76: mt76x2u: add netgear wdna3100v3 to device table 27c81f7c1480 wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band b7443c63069a wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band bab721a65f5a wifi: mt76: mt7925: fix mcu query command fail 1f0f71ed81e8 wifi: mt76: mt7925: fix wmm queue mapping bcfe2ad966f3 wifi: mt76: mt7925: fix fw download fail f982c3d67a29 wifi: mt76: mt7925: fix WoW failed in encrypted mode 6a72716ec213 wifi: mt76: mt7925: fix the wrong header translation config 50928b7e1359 wifi: mt76: mt7925: add flow to avoid chip bt function fail 762ab4530e8f wifi: mt76: mt7925: add support to set ifs time by mcu command 87deaf82efa4 wifi: mt76: mt7925: update PCIe DMA settings c190c1576522 wifi: mt76: mt7925: support temperature sensor 025d5734caba wifi: mt76: mt7996: check txs format before getting skb by pid 4768bfa2baca wifi: mt76: mt7996: fix TWT issues a65e3eced907 wifi: mt76: mt7996: disable AMSDU for non-data frames d71716d93aee wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps f21728f3f4bd wifi: mt76: mt7996: ensure 4-byte alignment for beacon commands 68dad7dacd2a wifi: mt76: mt7996: fix HE beamformer phy cap for station vif 66a28f340cdc wifi: mt76: mt7996: mark GCMP IGTK unsupported b47ad8a7764e wifi: mt76: mt7996: fix efuse reading issue c2fc7dae7b72 wifi: mt76: mt7996: remove TXS queue setting e0f1ed168ed5 wifi: mt76: mt7996: add locking for accessing mapped registers d0cc92c1fd08 wifi: mt76: connac: set correct muar_idx for mt799x chipsets ae0c62279adc wifi: mt76: mt7996: fix HIF_TXD_V2_1 value ecc14276af54 wifi: mt76: mt792x: fix ethtool warning 9827df56b241 wifi: mt76: move wed common utilities in wed.c dccbd2598505 wifi: mt76: mt7925: fix the wrong data type for scan command 9907f4f20261 wifi: mt76: mt792x: add the illegal value check for mtcl table of acpi 1b088a7ac06d wifi: mt76: mt7921e: fix use-after-free in free_irq() f3c5b4820d7f wifi: mt76: mt7925e: fix use-after-free in free_irq() d75eac9f5531 wifi: mt76: mt7921: fix incorrect type conversion for CLC command 7bd5401f5bb1 wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI ea55196bc4a0 wifi: mt76: mt792x: update the country list of EU for ACPI SAR 6124ea9135ed wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspend Signed-off-by: Felix Fietkau <nbd@nbd.name>
* broadcom-wl: remove packageFelix Fietkau2024-02-03
| | | | | | | Also remove remaining wireless extension support, since this package was the only in-tree user of it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wifi-scripts: add script to add phy capabilities to board.jsonFelix Fietkau2024-02-03
| | | | | | | Useful for UI and config generators. Will be used as intermediate step for generating the default wifi configuration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wifi-scripts: add new package, move wifi scripts to a single placeFelix Fietkau2024-02-03
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* malta: Remove kernel 5.15 configurationHauke Mehrtens2024-02-03
| | | | | | | Malta is using kernel 6.1 by default now, remove configuration for kernel 5.15. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* malta: Use kernel 6.1 by defaultHauke Mehrtens2024-02-03
| | | | | | All 4 subtargets are compiling fine and booting up in qemu. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/ccache: update to 4.9Nick Hainke2024-02-02
| | | | | | | | | | Release Notes: https://ccache.dev/releasenotes.html#_ccache_4_9 Manually refresh patch: - 100-honour-copts.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: modules: video: fix video-coda for 6.1Tim Harvey2024-02-02
| | | | | | | The coda kernel modules were moved between 5.15 and 6.1. Adapt the coda-vpu and imx-vdoa modules for that. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix drm-imx for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 changed DRM_GEM_DMA_HELPER to a module (drm_dma_helper.ko). Add this to the drm-imx to fix module dependencies. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix kmod-imx-pxp build for 6.1Lech Perczak2024-02-02
| | | | | | | Location of the module file was changed between 5.15 and 6.1. Adapt the recipe for that. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: modules: video: fix video-core for 6.1Tim Harvey2024-02-02
| | | | | | | | Linux 6.1 wraps core video drivers in a MEDIA_PLATFORM_DRIVERS submenu. Enable that for 6.1 and add some new necessary undefines to target/linux/generic/config-6.1 to avoid build failures. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: modules: video: fix kmod-video-imx-ldb build under 6.1Lech Perczak2024-02-02
| | | | | | | drm_dp_aux_bus.ko isn't built or required anymore under kernel 6.1. Mark that in the recipe. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: modules: video: fix deps for kmod-drm-imx-hdmi for 6.1Lech Perczak2024-02-02
| | | | | | | kmod-drm-imx-hdmi depends on kmod-drm-display-helper since 6.1. Include that in OpenWrt's recipes. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* imx: 6.1: refresh remaining patchesLech Perczak2024-02-02
| | | | | | Only the Apalis Ixora actually required manual touchups. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* imx: add 6.1 kernel as testingTim Harvey2024-02-02
| | | | | | allow to test 6.1 kernel for imx Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: 6.1: refresh kernel configTim Harvey2024-02-02
| | | | | | | done via 'make kernel_oldconfig' followed by adding missing symbols required for 6.1 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: copy config from 5.15 to 6.1Tim Harvey2024-02-02
| | | | | | Copy the 5.15 config to 6.1 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: copy patches 5.15 to 6.1Tim Harvey2024-02-02
| | | | | | | copy 5.15 patches excluding some that need manual rework touching non-upstream led props. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* zlib: update to 1.3.1Nick Hainke2024-02-02
| | | | | | | | | | Release Notes: https://github.com/madler/zlib/releases/tag/v1.3.1 Refresh patch: - 004-attach-sourcefiles-in-patch-002-to-buildsystem.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq: add support for AVM Fritzbox 3490Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 3490 device. It contains two SoCs, one Lantiq with a 5GHz WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module which is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem - Without telephony or ISDN Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: add support for AVM Fritzbox 5490/5491Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 5490/5491 devices. They contain two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module which is not supported with this commit. Both devices have fiber WAN ports. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port Lantiq gswip switch, 4x 1000/100/10 port (additional qca8334 switch for 2 ports), Port 5 is fixed and connected to the Wireless SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - AT 8033 based AON fiber port (5490) or GPON fiber port (5491) Unsupported: - DECT and ISDN telephony - Two ethernet ports (on extra switch) and fiber port not working Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: add support for AVM Fritzbox 7490Daniel Kestrel2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Fritzbox 7490 device. It contains two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module and is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem Unsupported: - DECT and ISDN telephony Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: add pcie endianess switch for slave devicesDaniel Kestrel2024-02-02
| | | | | | | | | | | The Fritzbox 3490, 5490 and 7490 devices have a Renesas µPD720202 USB3 PCIe device, which requires an endian switch for PCIe slave devices. The flag and setting is not implemented in the available patches. Since adding this setting would break other devices, a DTB setting lantiq,switch-pcie-endianess is added for selective enablement. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* qualcommax: enable back QCA808X PHY driverChristian Marangi2024-02-02
| | | | | | | | | Commit 997acc7f86ca ("generic: 6.1: backport at803x split patches") didn't enable back QCA808x PHY driver after the introduction of the at803x driver split. Fixes: 997acc7f86ca ("generic: 6.1: backport at803x split patches") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: add Comfast CF-E393AX supportDavid Bentham2024-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Comfast CF-E393AX is a dual-band Wi-Fi 6 POE ceiling mount access point. Oem firmware is a custom openwrt 21.02 snapshot version. We can gain access via ssh once we remove the root password. Hardware specification: SoC: MediaTek MT7981A 2x A53 Flash: 128 MB SPI-NAND RAM: 256MB DDR3 Ethernet: 1x 10/100/1000 Mbps built-in PHY (WAN) 1x 10/100/1000/2500 Mbps MaxLinear GPY211C (LAN) Switch: MediaTek MT7531AE WiFi: MediaTek MT7976D LEDS: 1x (Red, Blue and Green) Button: Reset UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | VCC GND TX RX | <= | | ----------------- | -------------------------- Gain SSH access: 1. Login into web interface (http://apipaddress/computer/login.html), and download the configuration(http://apipaddress/computer/config.html). 2. Rename downloaded backup config - 'backup.file to backup.tar.gz', Enter 'fakeroot' command then decompress the configuration: tar -zxf backup.tar.gz 3. Edit 'etc/shadow', update (remove) root password: With password = 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' 'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::' to Without password = 'root::0:99999:7:::' 'root::0:99999:7:::' 4. Repack 'etc' directory back to a new backup file: tar -zcf backup-ssh.tar.gz etc/ 5. Rename new config tar.gz file to 'backup-ssh.file' Exit fakeroot - 'exit' 6. Upload new configuration via web interface, now you can SSH with the following: 'ssh -vv -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa root@192.168.10.1'. Backup the mtd partitions - https://openwrt.org/docs/guide-user/installation/generic.backup 7. Copy openwrt factory firmware to the tmp folder to install via ssh: 'scp -o HostKeyAlgorithms=+ssh-rsa \ -o PubkeyAcceptedAlgorithms=+ssh-rsa \ *-mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin \ root@192.168.10.1:/tmp/' 'sysupgrade -n -F \ /tmp/*--mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin' 8. Once led has stopped flashing - Connect via ssh with the default openwrt ip address - 'ssh root@192.168.1.1' 9. SSH copy the openwrt sysupgrade firmware and upgrade as per the default instructions. Signed-off-by: David Bentham <db260179@gmail.com>
* ath79: Modify GL.iNer GL-S200 lan wan interfaceWeiping Yang2024-02-02
| | | | | | | | | | | | | Specifications: lan: eth0 wan: eth1 Problem Description: The lan wan port is reversed with the current machine. Use eth0 as LAN port and eth1 as WAN port. Signed-off-by: Weiping Yang <weiping.yang@gl-inet.com>
* ath79: add WAN definition for GL.iNET GL-E750 (Mudi)Jan Fuchs2024-02-02
| | | | | | | Add the default WAN interface to use QMI, to have WAN configured right from the start. Signed-off-by: Jan Fuchs <jf@simonwunderlich.de>
* ath79: add WWAN serial driver and qmi for GL.iNET GL-E750 (Mudi)Jan Fuchs2024-02-02
| | | | | | | | The driver for the cellular modems serial interface and qmi was missing from the default device packages. The driver is required to interact with the modem using AT commands. Signed-off-by: Jan Fuchs <jf@simonwunderlich.de>
* openssl: update to 3.0.13Ivan Pavlov2024-02-02
| | | | | | | | | | | | | | | | Major changes between OpenSSL 3.0.12 and OpenSSL 3.0.13 [30 Jan 2024] * Fixed PKCS12 Decoding crashes ([CVE-2024-0727]) * Fixed Excessive time spent checking invalid RSA public keys ([CVE-2023-6237]) * Fixed POLY1305 MAC implementation corrupting vector registers on PowerPC CPUs which support PowerISA 2.07 ([CVE-2023-6129]) * Fix excessive time spent in DH check / generation with large Q parameter value ([CVE-2023-5678]) Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* uhttpd: bump PKG_RELEASEDaniel Golle2024-02-02
| | | | | | | | Bump PKG_RELEASE which should have been done by commit 7b1c3068b7 ("uhttpd: restart when interface to listen becomes available"). Fixes: 7b1c3068b7 ("uhttpd: restart when interface to listen becomes available") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.148John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.148 Removed upstreamed: generic/hack-5.15/321-powerpc_crtsavres_prereq.patch[1] Manually rebased: target/linux/octeontx/patches-5.15/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.148&id=0b11a145eb00d51f7ef18cfcae587b93f9adb1e9 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit?h=v5.15.148&id=b67064bd372300a75293efbbc70624996dccffd4 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.75John Audia2024-02-01
| | | | | | | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.75 Removed upstreamed: generic/hack-6.1/321-powerpc_crtsavres_prereq.patch[1] generic/pending-6.1/540-ksmbd-only-v2-leases-handle-the-directory.patch[2] Rebased: bcm27xx/patches-6.1/950-0670-fbdev-Don-t-cancel-deferred-work-if-pagelist-empty.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=16b88e68b85d5520c28498bb847358ff6300cb90 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/fs/smb?h=v6.1.75&id=c866866c795296d3637ab0d48a3d8a3ef5d6f4a3 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.75&id=81f444f22816a82ada2cc787a2845cffc8c584a6 Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 6.1: backport PHY package MMD patchChristian Marangi2024-02-01
| | | | | | | | | | Backport PHY package MMD patch merged upstream that add support for writing MMD regs for the PHY package and support for writing to PHY package at an offset. All affected patches automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ath79: convert ath10k calibration data to NVMEM (ASCII MAC)Shiji Yang2024-02-01
| | | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with mtd ASCII MAC address. The "calibration" NVMEM cell size is 0x844. All unportable MAC address settings have been moved to '10_fix_wifi_mac' scripts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k calibration data to NVMEM (binary MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with mtd binary MAC address. The "calibration" NVMEM cell size is 0x844. The MAC addresses are assigned via dts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k calibration data to NVMEM (built-in MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k calibration data to NVMEM format for wave 1 devices with built-in MAC address. The "calibration" NVMEM cell size is 0x844. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (ASCII MAC)Shiji Yang2024-02-01
| | | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with mtd ASCII MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. All unportable MAC address settings have been moved to '10_fix_wifi_mac' scripts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (binary MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with mtd binary MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. The MAC addresses are assigned via dts. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert ath10k pre-calibration data to NVMEM (built-in MAC)Shiji Yang2024-02-01
| | | | | | | | This patch converts ath10k pre-calibration data to NVMEM format for wave 2 devices with built-in MAC address. The "pre-calibration" NVMEM cell size is 0x2f20. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: add back board-2.bin to COMFAST devicesShiji Yang2024-02-01
| | | | | | | | The ath10k driver will load both pre-calibration data and board-2.bin if board-2.bin exists. So it's not necessary to remove it. And this change won't increase jffs2 image size. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: move gpio packages to gpio menuChukun Pan2024-02-01
| | | | | | Move gpio packages to the 'GPIO support' menu. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: modules: move gpio modules to gpio menuChukun Pan2024-02-01
| | | | | | | | Since we have the 'GPIO support' menu, it is strange to look up gpio related modules in 'Other modules' menu. So move these modules and put them in the gpio menu. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: modules: gpio.mk: renamed from gpio-cascade.mkChukun Pan2024-02-01
| | | | | | This can be used to place the gpio module, so rename it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ucode: add libjson-c/host dependencyChad Monroe2024-02-01
| | | | | | ensure host libjson-c is built prior to ucode Signed-off-by: Chad Monroe <chad@monroe.io>
* generic: 6.1: backport at803x split patchesChristian Marangi2024-02-01
| | | | | | | | | | | | | | Backport at803x split patches merged upstream to tidy things up for the at803x PHY driver. New Kernel config are introduced hence any user needs to be updated. Downstream ipq40xx patch require rework to correctly move them to the qcom specific PHY directory. All affected patch automatically refreshed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Powered by cgit, Themed by Ted Yin.