aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* rockchip: add FriendlyARM NanoPC T4 supportLu jicong2023-07-26
| | | | | | | | | | | | | | | | | | | | | | Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* uboot-rockchip: add FriendlyARM NanoPC T4 supportLu jicong2023-07-26
| | | | | | | Add support for the FriendlyARM NanoPC T4. Reduce memory frequency to avoid random crash. Signed-off-by: Lu jicong <jiconglu58@gmail.com>
* mt76: update to the latest versionFelix Fietkau2023-07-26
| | | | | | | | | | 53edfc7aaa34 wifi: mt76: mt7603: fix beacon interval after disabling a single vif 7ef4dd12d982 wifi: mt76: mt7603: fix tx filter/flush function 152608a40aa7 wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC) cacac3902a63 wifi: mt76: split get_of_eeprom in subfunction cd3dfe392769 wifi: mt76: add support for providing eeprom in nvmem cells Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openssl: opt-out of lto usageChristophe Sokol2023-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes building with USE_LTO enabled: aarch64-openwrt-linux-musl-gcc -fPIC -pthread -Wa,--noexecstack -Wall -O3 -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -fmacro-prefix-map=/build_dir/target-aarch64_cortex-a53_musl/openssl-3.0.9=openssl-3.0.9 -ffunction-sections -fdata-sections -flto=auto -fno-fat-lto-objects -Wformat -Werror=format-security -DPIC -fPIC -fstack-protector-strong -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -DPIC -fPIC -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -fmacro-prefix-map=/build_dir/target-aarch64_cortex-a53_musl/openssl-3.0.9=openssl-3.0.9 -ffunction-sections -fdata-sections -flto=auto -fno-fat-lto-objects -Wformat -Werror=format-security -fPIC -fstack-protector-strong -fPIC -fuse-ld=bfd -flto=auto -fuse-linker-plugin -fPIC -specs=/include/hardened-ld-pie.specs -znow -zrelro -L. -Wl,-z,defs -Wl,-znodelete -shared -Wl,-Bsymbolic -Wl,-z,now -Wl,-z,relro -L/staging_dir/toolchain-aarch64_cortex-a53_gcc-13.1.0_musl/usr/lib -L/staging_dir/toolchain-aarch64_cortex-a53_gcc-13.1.0_musl/lib -Wl,--gc-sections \ -o providers/legacy.so -Wl,--version-script=providers/legacy.ld \ providers/legacy-dso-legacyprov.o \ providers/liblegacy.a providers/libcommon.a -lcrypto -ldl -pthread ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `legacy_get_params': <artificial>:(.text.legacy_get_params+0xd4): undefined reference to `ossl_prov_is_running' ld.bfd: <artificial>:(.text.legacy_get_params+0xd8): undefined reference to `ossl_prov_is_running' ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `legacy_teardown': <artificial>:(.text.legacy_teardown+0x4): undefined reference to `ossl_prov_ctx_get0_libctx' ld.bfd: <artificial>:(.text.legacy_teardown+0x8): undefined reference to `ossl_prov_ctx_get0_libctx' ld.bfd: <artificial>:(.text.legacy_teardown+0x34): undefined reference to `ossl_prov_ctx_free' ld.bfd: <artificial>:(.text.legacy_teardown+0x38): undefined reference to `ossl_prov_ctx_free' ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `OSSL_provider_init': <artificial>:(.text.OSSL_provider_init+0x14): undefined reference to `ossl_prov_ctx_new' ld.bfd: <artificial>:(.text.OSSL_provider_init+0x18): undefined reference to `ossl_prov_ctx_new' ld.bfd: <artificial>:(.text.OSSL_provider_init+0x84): undefined reference to `ossl_prov_ctx_set0_libctx' ld.bfd: <artificial>:(.text.OSSL_provider_init+0x88): undefined reference to `ossl_prov_ctx_set0_libctx' ld.bfd: <artificial>:(.text.OSSL_provider_init+0x98): undefined reference to `ossl_prov_ctx_set0_handle' ld.bfd: <artificial>:(.text.OSSL_provider_init+0x9c): undefined reference to `ossl_prov_ctx_set0_handle' ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_kdfs+0x10): undefined reference to `ossl_kdf_pbkdf1_functions' ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_ciphers+0x10): undefined reference to `ossl_cast5128ecb_functions' ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_ciphers+0x30): undefined reference to `ossl_cast5128cbc_functions' [...] ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_digests+0x10): undefined reference to `ossl_md4_functions' ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_digests+0x30): undefined reference to `ossl_ripemd160_functions' collect2: error: ld returned 1 exit status Signed-off-by: Christophe Sokol <christophe@wk3.org>
* ipq40xx: add support for Teltonika RUTX50David Bauer2023-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4018 RAM: 256M Flash: 16MB SPI-NOR (W25Q128) 128MB SPI-NAND (XTX) WiFi: 2T2R (2GHz 802.11n ; 5 GHz 802.11ac) ETH: 4x LAN ; 1x WAN (Gigabit) CELL: Quectel RG501Q 3G/4G/5G UART: Available on the goldfinger connector (Pinout silkscreened) 115200 8N1 3V3 - Only connect RX / TX / GND Installation ------------ 1. Enable SSH in the Teltonika UI (System --> Administration --> Access Control) 2. Check from which partition set the device is currently running from. $ cat /proc/boot_info/rootfs/primaryboot In case this output reads 0, install a Software update from Teltonika first. After upgrade completion, check this file now reads 1 before continuing. 2. Transfer the OpenWrt factory image to the device using scp. Use the same password (user root!) as used for the Web-UI. $ scp -O openwrt-factory.bin root@192.168.1.1:/tmp 3. Connect to the device using ssh as the root user. 4. Install OpenWrt by writing the factory image to flash. $ ubiformat /dev/mtd16 -y -f /tmp/openwrt-factory.bin 5. Instruct the bootloaer to boot from the first partition set. $ echo 0 > /proc/boot_info/rootfs/primaryboot $ cat /proc/boot_info/getbinary_bootconfig > /tmp/bootconfig.bin $ cat /proc/boot_info/getbinary_bootconfig1 > /tmp/bootconfig1.bin $ mtd write /tmp/bootconfig.bin /dev/mtd2 $ mtd write /tmp/bootconfig1.bin /dev/mtd3 6. Reboot the device. $ reboot Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: move Teltonika RUT STM32 IO to specific DTSDavid Bauer2023-07-26
| | | | | | Prepare to re-use the DTS for the RUTX50. Signed-off-by: David Bauer <mail@david-bauer.net>
* urngd: update to the latest masterRafał Miłecki2023-07-25
| | | | | | | | | | | | | | | | | | | | | | | | 7aefb47 jitterentropy-rngd: update to the v1.2.0 What's interesting about jitterentropy-rngd v1.2.0 release is that it bumps its copy of jitterentropy-library from v2.2.0 to the v3.0.0. That bump includes a relevant commit 3130cd9 ("replace LSFR with SHA-3 256"). When initializing entropy jent calculates time delta. Time values are obtained using clock_gettime() + CLOCK_REALTIME. There is no guarantee from CLOCK_REALTIME of unique values and slow devices often return duplicated ones. A switch from jent_lfsr_time() to jent_hash_time() resulted in many less cases of zero delta and avoids ECOARSETIME. Long story short: on some system this fixes: [ 6.722725] urngd: jent-rng init failed, err: 2 This is important change for BCM53573 which doesn't include hwrng and seems to have arch_timer running at 36,8 Hz. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 6.1 to 6.1.40John Audia2023-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-6.1/701-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] generic/pending-6.1/160-workqueue-fix-enum-type-for-gcc-13.patch[2] qualcommax/patches-6.1/0022-v6.5-soc-qcom-mdt_loader-Fix-unconditional-call-to-scm_pa.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=685b57a1221c38ec8b456f968264d2496715820c 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=2d57a1590f4d8c516f5aaf8fd5bb4f52d67275d8 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.40&id=33f8dff6e1cbba5c2ec85fa5649c0a759a7e685c Build system: x86/64, filogic/xiaomi_redmi-router-ax6000-ubootmod Build-tested: x86/64, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 6.1 to 6.1.39John Audia2023-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[1] generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[2] bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch[3] bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch[4] bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch[5] bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[6] bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[7] mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch[8] qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[9] Manually rebased: bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ab0bd172d6289310a05a0cd15e1432e828d386ae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=6df680709d901346831ef8f221cc90a42062c526 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=5044e5f2511c9afdf9880d2bb6b9d37dfc345dac 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=e27948f329f7e02591ed1feb9a7710c2ccf89a83 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ad2928e7f3f6120a0bd18aa1056b3b24068027c5 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=2b55a985727833f37c39911f34096b3fdf2a367d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=90d4c487cd658b51212eb65ae804ab11af193672 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=7e3ee25e8c7c7be1eacdfc6d9f5f0e550a2af241 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=b20854ef6c4955be3310975a72f02d92cb01d6d4 Build system: x86/64 Build-tested: x86/64 Run-tested: x86/64 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Co-authored-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: John Audia <therealgraysky@proton.me> [ rebase bcm27xx and mediatek patches, refresh commit description ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [ minor fixup to bcm27xx patches, refresh commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: drop mips highmem offset start overridesFelix Fietkau2023-07-24
| | | | | | | | | | | The maximum offset that can be supported is 0x20000000 Do not override it to to something bigger than that on MT7621, as that could cause issues based on the fixed memory mappings. This makes the last 64 MB RAM unusable on MT7621 devices with 512 MB but avoids incurring a heavy performance hit Fixes: cd2b74e01e8d ("ramips: mt7621: disable highmem support and remove highmem offset patch") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7621: disable highmem support and remove highmem offset patchFelix Fietkau2023-07-24
| | | | | | | | | | On MT7621 it was observed, that enabling highmem support causes a significant performance drop, as documented in: https://github.com/openwrt/openwrt/issues/13151 By adjusting the highmem start offset, we avoid leaving any RAM unaddressable, even on devices with 512 MB Fixes: https://github.com/openwrt/openwrt/issues/13151 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: add BCM53573 Ethernet fix sent upstream for v6.6Rafał Miłecki2023-07-23
| | | | | | | | | | | | | It seems that DSA-based b53 driver never worked with BCM53573 SoCs and BCM53125. In case of swconfig-based b53 this fixes a regression. Switching bgmac from using mdiobus_register() to of_mdiobus_register() resulted in MDIO device (BCM53125) having of_node set (see of_mdiobus_register_phy()). That made downstream b53 driver read invalid data from DT and broke Ethernet support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* rtl8812au-ct: fix compilation error with kernel 6.1Christian Marangi2023-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | Kernel 6.1 have renamed complete_and_exit to kthread_complete_and_exit. This was just a rename and nothing is changed implementation wise. Fix compilation error by using the new symbol name. Fix compilation error: In file included from /builder/shared-workdir/build/sdk/build_dir/target-aarch64_cortex-a53_musl/linux-bcm27xx_bcm2710/rtl8812au-ct-2021-11-07-39df5596/include/osdep_service.h:41, from /builder/shared-workdir/build/sdk/build_dir/target-aarch64_cortex-a53_musl/linux-bcm27xx_bcm2710/rtl8812au-ct-2021-11-07-39df5596/include/drv_types.h:32, from /builder/shared-workdir/build/sdk/build_dir/target-aarch64_cortex-a53_musl/linux-bcm27xx_bcm2710/rtl8812au-ct-2021-11-07-39df5596/core/rtw_cmd.c:22: /builder/shared-workdir/build/sdk/build_dir/target-aarch64_cortex-a53_musl/linux-bcm27xx_bcm2710/rtl8812au-ct-2021-11-07-39df5596/core/rtw_cmd.c: In function 'rtw_cmd_thread': /builder/shared-workdir/build/sdk/build_dir/target-aarch64_cortex-a53_musl/linux-bcm27xx_bcm2710/rtl8812au-ct-2021-11-07-39df5596/include/osdep_service_linux.h:166:23: error: implicit declaration of function 'complete_and_exit' [-Werror=implicit-function-declaration] 166 | #define thread_exit() complete_and_exit(NULL, 0) | ^~~~~~~~~~~~~~~~~ /builder/shared-workdir/build/sdk/build_dir/target-aarch64_cortex-a53_musl/linux-bcm27xx_bcm2710/rtl8812au-ct-2021-11-07-39df5596/core/rtw_cmd.c:706:9: note: in expansion of macro 'thread_exit' 706 | thread_exit(); | ^~~~~~~~~~~ /builder/shared-workdir/build/sdk/build_dir/target-aarch64_cortex-a53_musl/linux-bcm27xx_bcm2710/rtl8812au-ct-2021-11-07-39df5596/core/rtw_cmd.c:708:1: error: control reaches end of non-void function [-Werror=return-type] 708 | } | ^ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bcm27xx: update dwc_otc driver with new kthread_complete_and_exit nameChristian Marangi2023-07-23
| | | | | | | | | | Kernel 6.1 renamed and moved complete_and_exit to kthread_complete_and_exit. This was just a rename and nothing is changed implementation wise. Update to the new symbol name to fix compilation error. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mac80211: limit MT7620 TX power based on eeprom calibrationShiji Yang2023-07-23
| | | | | | | | This patch adds basic TX power control for the MT7620 and limits its maximum TX power. This can avoid the link speed decrease caused by chip overheating. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mediatek: add missing SPDX headerDavid Bauer2023-07-22
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: filogic: set DEVICE_DTS_LOADADDR for BPi-R3Daniel Golle2023-07-22
| | | | | | | U-Boot complains that the overlayed DT needs relocation, so set DEVICE_DTS_LOADADDR to have it relocated. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for ZyXEL NWA50AX ProDavid Bauer2023-07-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7981 RAM: 512M DDR4 FLASH: 256M NAND ETH: MaxLinear GPY211 (2.5GbE N Base-T) WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax) BTN: 1x Reset LED: 1x Multi-Color UART Console ------------ Available below the rubber cover next to the ethernet port. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. In case this is not the case, OpenWrt will boot only one time, returning to the ZyXEL firmware the second boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP / Recovery ---------------------------- This installation routine is especially useful in case of a bricked device. Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin. $ atnf nwa50axpro-openwrt-initramfs.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd9 get-status $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd9 set-active-image 0 Copy the OpenWrt sysupgrade image to the device using scp. Write the sysupgrade image to NAND using sysupgrade. $ sysupgrade -n image.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq806x: reorganize 02_network board.d scriptChristian Marangi2023-07-21
| | | | | | | Reorganize 02_network board.d script by splitting setup switch and setup mac address. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: rename kernel files to generic nameChristian Marangi2023-07-21
| | | | | | | Drop 6.1 tag from files directory for ipq806x now that we moved to 6.1 by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: drop useless kernel patches and dts filesChristian Marangi2023-07-21
| | | | | | | Drop useless 5.15 kernel patches and files now that we moved to kernel 6.1 by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: move to kernel 6.1 by defaultChristian Marangi2023-07-21
| | | | | | Move to kernel 6.1 by default in preparation for DSA introduction. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 6.1: backport patch fixing broken hwspinlockChristian Marangi2023-07-21
| | | | | | | Backport merged patch fixing broken hwspinlock due to missing regmap config for SFPB MMIO implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* octeon: use fixed layout cell "mac-base" for Cisco vEdge 1000Rafał Miłecki2023-07-21
| | | | | | | | | | | This drops a use of downstream "mac-address-increment". Cc: Christian Svensson <blue@cmd.nu> Cc: Tommy Nevtelen <tommy@nevtelen.com> Cc: Viktor Ekmark <viktor@ekmark.se> Cc: Daniel Wennberg <github@networkninja.se> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Christian Svensson <blue@cmd.nu>
* ramips: replace "mac-address-ascii" with "mac-base"Rafał Miłecki2023-07-21
| | | | | | | | | With upstream accepted "mac-base" binding there is no need for a downstream "mac-address-ascii" workaround anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [TP-Link EC330-G5u v1 - OK] Tested-by: Mikhail Zhilkin <csharper2005@gmail.com>
* strace: update to 6.4Nick Hainke2023-07-19
| | | | | | | Release Notes: https://github.com/strace/strace/releases/tag/v6.4 Signed-off-by: Nick Hainke <vincent@systemli.org>
* iproute2: update 6.4Nick Hainke2023-07-19
| | | | | | | Release Notes: https://lore.kernel.org/lkml/20230626093137.2f302acc@hermes.local/t/ Signed-off-by: Nick Hainke <vincent@systemli.org>
* ethtool: update to 6.4Nick Hainke2023-07-19
| | | | | | | | | | | | | | | | | | | | ChangeLog: 125b080 Release version 6.4. 5660918 update UAPI header copies f493e63 netlink: fix duplex setting b3e341c cmis: report LOL / LOS / Tx Fault 045d8db sff-8636: report LOL / LOS / Tx Fault a6505f3 drop checks for macros provided in UAPI header copies 86c0c41 do not check for strtol() function dd8e3ae actually check for C11 compiler 43e4d30 add local copies of macros from autoconf-archive faa4700 drop check for big endian types 31b7b5e Require a compiler with support for C11 features 946d18b update UAPI header copies eebf01f ethtool: Add support for configuring tx-push-buf-len 2782ea8 update UAPI header copies Signed-off-by: Nick Hainke <vincent@systemli.org>
* nettle: update to 3.9.1Nick Hainke2023-07-19
| | | | | | | Announcement: https://lists.gnu.org/archive/html/info-gnu/2023-06/msg00000.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: move ubnt-xm 64M RAM boards back to genericFelix Baumann2023-07-19
| | | | | | | | | return ubnt_rocket-m and ubnt_powerbridge-m back to ath79-generic They have enough RAM-ressources to not be considered as tiny. This reverts the commit f4415f7635164ec07ddc22f56df93555804b5767 partially Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* libbpf: Update to v1.2.2Tony Ambardar2023-07-18
| | | | | | | Update to the latest upstream release to include recent bugfixes: Link: https://github.com/libbpf/libbpf/compare/v1.2.0...v1.2.2 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* nftables: update to 1.0.8Nick Hainke2023-07-18
| | | | | | | ChangeLog: https://www.netfilter.org/projects/nftables/files/changes-nftables-1.0.8.txt Signed-off-by: Nick Hainke <vincent@systemli.org>
* libnftnl: update to 1.2.6Nick Hainke2023-07-18
| | | | | | | Release Notes: https://lists.netfilter.org/pipermail/netfilter-announce/2023/000250.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* ramips: fix Ubiquiti EdgeRouter X's MAC address for gmac1Rafał Miłecki2023-07-18
| | | | | | | | This fixes: [ 0.586649] OF: /ethernet@1e100000/mac@1: #nvmem-cell-cells = 1 found 0 Fixes: 28b6224104cc ("ramips: use fixed layout cell "mac-base" for Ubiquiti EdgeRouter X") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: fix duplicate wifi radio sections when using phy renamingFelix Fietkau2023-07-17
| | | | | | | | | | The duplicate sections are caused by a race condition at boot, when board.json is not available. In that case, the final phy name cannot be resolved, and extra sections referring to the path are created. Fix this by making sure that wifi config is not being run before board.json is created. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01837Michał Kwiatek2023-07-15
| | | | | | | | | | | | | Changelog from quic: Bug fixes, stability improvements from previous releases are present. There are no backward comatibility issues with this release. Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600 Signed-off-by: Michał Kwiatek <michal@kwiatek.it> [ improve commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* sdk: update SDK MakefileChristian Lamparter2023-07-15
| | | | | | | | the SDK's Makefile referenced the old file name. Update it too. Fixes: 2d5f7035cf45 ("sdk: rename README") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* realtek: add support for HPE 1920-8g-poe+Pawel Dembicki2023-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware information: --------------------- - RTL8380 SoC - 8 Gigabit RJ45 PoE ports (built-in RTL8218B) - 2 SFP ports (built-in SerDes) - RJ45 RS232 port on front panel - 32 MiB NOR Flash - 128 MiB DDR3 DRAM - PT7A7514 watchdog - PoE chips: Nuvoton M0516LDE + BCM59121 Known issues: --------------------- - PoE LEDs are uncontrolled. (Manual taken from f2f09bc00280) Booting initramfs image: ------------------------ - Prepare a FTP or TFTP server serving the OpenWrt initramfs image and connect the server to a switch port. - Connect to the console port of the device and enter the extended boot menu by typing Ctrl+B when prompted. - Choose the menu option "<3> Enter Ethernet SubMenu". - Set network parameters via the option "<5> Modify Ethernet Parameter". Enter the FTP/TFTP filename as "Load File Name" ("Target File Name" can be left blank, it is not required for booting from RAM). Note that the configuration is saved on flash, so it only needs to be done once. - Select "<1> Download Application Program To SDRAM And Run". Initial installation: --------------------- - Boot an initramfs image as described above, then use sysupgrade to install OpenWrt permanently. After initial installation, the bootloader needs to be configured to load the correct image file - Enter the extended boot menu again and choose "<4> File Control", then select "<2> Set Application File type". - Enter the number of the file "openwrt-kernel.bin" (should be 1), and use the option "<1> +Main" to select it as boot image. - Choose "<0> Exit To Main Menu" and then "<1> Boot System". NOTE: The bootloader on these devices can only boot from the VFS filesystem which normally spans most of the flash. With OpenWrt, only the first part of the firmware partition contains a valid filesystem, the rest is used for rootfs. As the bootloader does not know about this, you must not do any file operations in the bootloader, as this may corrupt the OpenWrt installation (selecting the boot image is an exception, as it only stores a flag in the bootloader data, but doesn't write to the filesystem). Example PoE config file (/etc/config/poe): --------------------- config global option budget '180' config port option enable '1' option id '1' option name 'lan8' option poe_plus '1' option priority '2' config port option enable '1' option id '2' option name 'lan7' option poe_plus '1' option priority '2' config port option enable '1' option id '3' option name 'lan6' option poe_plus '1' option priority '2' config port option enable '1' option id '4' option name 'lan5' option poe_plus '1' option priority '2' config port option enable '1' option id '5' option name 'lan4' option poe_plus '1' option priority '2' config port option enable '1' option id '6' option name 'lan3' option poe_plus '1' option priority '2' config port option enable '1' option id '7' option name 'lan2' option poe_plus '1' option priority '2' config port option enable '1' option id '8' option name 'lan1' option poe_plus '1' option priority '2' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* octeon: ubnt-edgerouter-4/6p: devicetree cleanupCarsten Spieß2023-07-15
| | | | | | | | | | removed redundant eeprom partition nodes from cn7130_ubnt_edgerouter-4.dts and cn7130_ubnt_edgerouter-6p.dts as they are identically defined in cn7130_ubnt_edgerouter-e300.dtsi. Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (integrated eeprom referenced node in the .dtsi) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* octeon: ubnt-edgerouter-e300: fix missing MTD partitionCarsten Spieß2023-07-15
| | | | | | | | | | | | | | The MAC addresses should be read from 3rd MTD partition, but only two MTD partitions are populated. To fix it, a partitions node has to surround the partition nodes in device tree. Tested with Edgerouter 6P Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (fixed checkpatch complains) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* octeon: ubnt-edgerouter-e300: fix LED settingsCarsten Spieß2023-07-15
| | | | | | | | | | | | | LEDs on Edgerouter 6P didn't work correctly: blue /white LED swapped, on/off state inverted Fixed in device tree: swap the GPIO ports for power:blue and power:white LEDs change LED activity from LOW to HIGH Tested on Edgerouter 6P Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
* octeon: n821: add Cisco vEdge 1000 baseChristian Svensson2023-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the first commit to introduce the base for the N821 board used in Cisco vEdge 1000. This commit does not include the custom CPLD drivers but rather everything else that is already present in the upstream kernel. This results in an image that boots, but e.g. the SFP ports are not usable. Hardware: - CPU: Cavium Networks CN6130, 4 cores @ 1.0 GHz - Flash: - 16 MiB SPI NOR presented as 2x8 MiB for A/B boot recovery - 8192 MiB eMMC - RAM: 4096 MiB - Ethernet 1Gbit ports: 1x - Ethernet SFP ports: 8x - USB ports: 2x 3.0 Type-A on front panel - Serial: Two, one internal and one external - JTAG: Yes - LED count: 18x - Button count: 1x - GPIOs: 1x - Power: 2x redundant DC 12V barrel plug - Extra: Slot for SD card on front See the OpenWrt wiki for more hardware details. Installation: - Flash squashfs to /dev/sda2 and put kernel on /dev/sda1. - Update uboot's bootcmd environment variable to match. Full installation guide will be added to OpenWrt wiki when sysupgrade support is added. Signed-off-by: Christian Svensson <blue@cmd.nu> Signed-off-by: Tommy Nevtelen <tommy@nevtelen.com> Tested-by: Viktor Ekmark <viktor@ekmark.se> Tested-by: Daniel Wennberg <github@networkninja.se>
* octeon: enable AT24 unconditionallyChristian Svensson2023-07-15
| | | | | | | | For the N821 platform we need to load the AT24 EEPROM driver before everything else in order for the MAC address to be available at driver initialization time. Signed-off-by: Christian Svensson <blue@cmd.nu>
* build: fix generation of large .vdi imagesAdones Pitogo2023-07-15
| | | | | | | | | | | Instead of loading the whole image into the memory when generating the sha256 sum, we load the file in chunks and update the hash incrementally to avoid MemoryError in python. Also remove a stray empty line. Fixes: #13056 Signed-off-by: Adones Pitogo <pitogo.adones@gmail.com> (mention empty line removal, adds Fixes from PR) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* sdk: rename READMETomasz Maciej Nowak2023-07-15
| | | | | | | | | | 'help' target fails not finding a file, so follow up on a change[2] made as a fix for main README[1]. 1. d0113711a31f ("README: port to 21st century") 2. 751486b31fd9 ("build: fix README.md reference after rename") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ib: split out processing user provided packagesTomasz Maciej Nowak2023-07-15
| | | | | | | | | Some device recipes remove default target packages. If user tries to add them back they will be ignored, since packages list is processed in one go. Process the device recipe packages first and do user ones later, so additions won't get filtered out. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* perf: opt-out of lto usageJavier Marcet2023-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes building with USE_LTO enabled: mold: error: undefined symbol: __memset >>> referenced by <artificial> >>> ./tmp/ccsgR7G6.ltrans10.ltrans.o mold: error: undefined symbol: memset_orig >>> referenced by <artificial> >>> ./tmp/ccsgR7G6.ltrans10.ltrans.o mold: error: undefined symbol: perf_regs_load >>> referenced by <artificial> >>> ./tmp/ccsgR7G6.ltrans15.ltrans.o:(test_dwarf_unwind__thread) mold: error: undefined symbol: memset_erms >>> referenced by <artificial> >>> ./tmp/ccsgR7G6.ltrans10.ltrans.o mold: error: undefined symbol: memcpy_orig >>> referenced by <artificial> >>> ./tmp/ccsgR7G6.ltrans10.ltrans.o mold: error: undefined symbol: memcpy_erms >>> referenced by <artificial> >>> ./tmp/ccsgR7G6.ltrans10.ltrans.o mold: error: undefined symbol: __memcpy >>> referenced by <artificial> >>> ./tmp/ccsgR7G6.ltrans10.ltrans.o collect2: error: ld returned 1 exit status make[5]: *** [Makefile.perf:670: ../openwrt/linux/tools/perf-target-x86_64_musl/perf] Error 1 make[4]: *** [Makefile.perf:238: sub-make] Error 2 make[3]: *** [Makefile:70: all] Error 2 make[2]: *** [Makefile:84: ./build_dir/target-x86_64_musl/linux-x86_64/linux-5.15.120/tools/perf-target-x86_64_musl/.built] Error 2 make[2]: Leaving directory './package/devel/perf' time: package/devel/perf/compile#55.88#6.78#12.89 ERROR: package/devel/perf failed to build. Signed-off-by: Javier Marcet <javier@marcet.info>
* grub2: opt-out of gc-sections usageJavier Marcet2023-07-14
| | | | | | | | | | | | | | | | | This fixes building with USE_GC_SECTIONS enabled: ./staging_dir/toolchain-x86_64_gcc-12.3.0_musl/bin/../lib/gcc/x86_64-openwrt-linux-musl/12.3.0/../../../../x86_64-openwrt-linux-musl/bin/ld.bfd: --gc-sections requires a defined symbol root specified by -e or -u collect2: error: ld returned 1 exit status make[4]: *** [Makefile:27665: disk.module] Error 1 make[4]: Leaving directory './build_dir/target-x86_64_musl/linux-x86_64/grub-efi/grub-2.06/grub-core' make[3]: *** [Makefile:26916: all] Error 2 make[3]: Leaving directory './build_dir/target-x86_64_musl/linux-x86_64/grub-efi/grub-2.06/grub-core' make[2]: *** [Makefile:205: ./build_dir/target-x86_64_musl/linux-x86_64/grub-efi/grub-2.06/.built] Error 2 make[2]: Leaving directory './package/boot/grub2' time: package/boot/grub2/efi/compile#3.21#1.34#4.28 ERROR: package/boot/grub2 failed to build (build variant: efi). Signed-off-by: Javier Marcet <javier@marcet.info>
* bcm53xx: backport DT changes queued for v6.6Rafał Miłecki2023-07-14
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: drop accidentally pushed 6.1 hack patchesRafał Miłecki2023-07-14
| | | | | Fixes: 2953d3c15677 ("bcm4908: add testing support for kernel 6.1") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Powered by cgit, Themed by Ted Yin.