aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* uqmi: added timeout to fix hanging qmi.shUwe Niethammer2023-10-03
| | | | | | | | | | Modems which are using qmi do not reply on the 1st sync but they do on subsequent. So qmi.sh is hanging on the first call. Since 2020 uqmi supports a timeout parameter. Unfortunately qmi.sh didn't make use of this parameter. So qmi.sh is now invoking an early dummy access to unlock the modem Signed-off-by: Uwe Niethammer <uwe@dr-niethammer.de>
* yafut: add missing PKG_MIRROR_HASHChristian Marangi2023-10-02
| | | | | | | Add missing PKG_MIRROR_HASH. This is always needed as is used to generate and use a tar instead of git clone and validate the hash of it. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: use upstreamed SDI disable supportRobert Marko2023-10-02
| | | | | | | | | | | | | | | Google WiFi board has what seems as debug version of TZ/QSEE and it is always enabling SDI (Secure Debug Image) and in order to do a regular reboot it must be disabled, as otherwise you are stuck in a debug state where you are supposed to extract debug logs via QCA tooling which is not helpfull at all for regular users. So, instead of using our downstream version to disable SDI lets use the version that was merged upstream and relies on a boolean property in the SCM node instead of checking the compatible. Signed-off-by: Robert Marko <robimarko@gmail.com> Tested-by: Brian Norris <computersforpeace@gmail.com>
* ipq-wifi: improve and update instructions on how to add board filesChristian Marangi2023-10-02
| | | | | | | Improve and update instructions on how to add board files and both describe the needed step to upstream a board file or to use it locally. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* rtl8812au-ct: Fix PKG_MIRROR_HASHHauke Mehrtens2023-10-02
| | | | | | | | | The PKG_MIRROR_HASH is wrong, fix it. Found and fixed using this command: make package download check FIXUP=1 Fixes: c123e4f0533e ("rtl8812au-ct: bump to fix kernel 6.1 compile") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: fix eeprom loading (Mercusys MR90X v1)Mikhail Zhilkin2023-10-02
| | | | | | | | | | | | | Commit mt76: drop default eeprom file for mt7986-firmware (e3aa645b267ca4f08773b5366583e9b0020fc3e9) breaks eeprom loading for Mercusys MR90X v1. As a result WiFi is not working at all. This commit adds Mercusus MR90x to the caldata script (it works after the commit mentioned above). And we can safely drop "81_fix_eeprom" script as it's no longer required. Fixes: e3aa645b267ca4f08773b5366583e9b0020fc3e9 Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* uci: fix Makefile formattingOskari Rauta2023-10-01
| | | | | | Fix wrong declaration for PKG_SROUCE_URL and PKG_VERSION variables and add missing colon Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* ipq806x: disable unused SWCONFIG config flagsChristian Marangi2023-09-30
| | | | | | | Disable unused SWCONFIG config flags now that we switched to DSA and are not needed anymore. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: refresh qca8k patchesChristian Marangi2023-09-30
| | | | | | Refresh qca8k patches to sync with the generic backports changes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add LEDs definition for non-standard qca8k LEDsChristian Marangi2023-09-30
| | | | | | | | | | Add LEDs definition for devices that use a non-standard qca8k LEDs configuration. This is to restore original setup of the LED and be on par with swconfig old configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: enable and setup multi-CPU port for qca8k switchChristian Marangi2023-09-30
| | | | | | | | | | | | | | | | | Enable and setup multi-cpu for qca8k switch for ipq806x based devices. Rework each DTS to enable the secondary CPU port on QCA8K switch and apply the required values originally set by the OEM in the old swconfig node. In original firmware the first CPU port was always assigned to the WAN port and the secondary CPU port was assigned to the rest of the LAN port. Follow this original implementation using an init.d script. To setup the CPU port ip tools is required. Add additional default package ip-tiny to correctly setup the CPU port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch for multi CPU port support on QCA8KChristian Marangi2023-09-30
| | | | | | | | Backport pending patch for multi CPU port support on QCA8K. 6.1 already supports all the requiredt code to change a DSA master port so only this patch fixing the driver is required. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport various qca8k fixes patchChristian Marangi2023-09-30
| | | | | | | Backport various QCA8K fixes patch merged upstream. Refresh any changed patches due to backports. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: move ASRock G10 fix mac preinit script to generic board.d scriptChristian Marangi2023-09-30
| | | | | | | | Drop and move ASRock G10 preinit script to fix mac address to generic board.d script and rework for consistency with other devices following a similar implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: convert each device to DSA implementationChristian Marangi2023-09-30
| | | | | | | | | | | Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: add patch for GPON-ONU-34-20BI quirkChristian Marangi2023-09-29
| | | | | | Backport patch merged upstream adding quirk for SFP GPON-ONU-34-20BI. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: increase PKG_RELEASE to fix buildsNick Hainke2023-09-29
| | | | | | | Recent hostapd changes just edited the ucode files. It is required to bump the PKG_RELEASE to include the newest changes in the latest builds. Signed-off-by: Nick Hainke <vincent@systemli.org>
* filogic: add support for GL.iNet GL-MT6000Jianhui Zhao2023-09-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: * SoC: MediaTek MT7986A 4x A53 * Flash: 8GB EMMC * RAM: 1GB DDR4 * Ethernet: * 2x2.5G RJ45 port (RTL8221B) * 4x1G RJ45 ports (MT7531AE) * WLAN: * 2.4GHz: MT7976GN 4T4R * 5GHz: MT7976AN 4T4R * Button: Reset * LED: 1 x dual color LED * USB: 1 x USB 3.0 * Power: DC 12V 4A * UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC) * JTAG: 9 PIN If you want to use u-boot from OpenWrt, you can upgrade it safely. * bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin * fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip `openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* mt76: drop default eeprom file for mt7986-firmwareChukun Pan2023-09-29
| | | | | | | | | The mt76 driver usually reads the eeprom on the mtd partition at dts. For emmc device we need to use caldata_extract script to read the eeprom. However, the default eeprom file breaks the caldata script execution, so remove it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* generic: net: phy: realtek: add interrupt support for RTL8221BJianhui Zhao2023-09-29
| | | | | | This commit introduces interrupt support for RTL8221B. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* uboot-mediatek: sync spi-nand driver with SDKChukun Pan2023-09-29
| | | | | | | | | | | When adding new router support, I found that uboot could not recognize flash: "unknown raw ID xxx". Sync SPI-NAND driver for mediatek to fixes this: * Add support for Winbond W25N01KV 1Gbit chip. * Add support for Etron SPI-NAND chip. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sifiveu: refresh 6.1 configZoltan HERPAI2023-09-28
| | | | | | Add new config symbols as required. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: remove upstreamed patches, refresh remaining onesZoltan HERPAI2023-09-28
| | | | | | | | | | | | Upstreamed: 0002-riscv-sifive-unmatched-update-regulators-values.patch 0003-riscv-sifive-unmatched-define-PWM-LEDs.patch 0006-riscv-sbi-srst-support.patch Compile-tested: HiFive Unleashed / Unmatched Runtime-tested: HiFive Unleashed / Unmatched Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: add testing kernel 6.1Zoltan HERPAI2023-09-28
| | | | | | | Compile-tested: HiFive Unleashed / Unmatched Runtime-tested: HiFive Unleashed / Unmatched Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: copy patches from 5.15 to 6.1Zoltan HERPAI2023-09-28
| | | | | | To start the upgrade, we copy the patches from 5.15 to 6.1. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* hostapd: fix wpa_supplicant mac address allocation on ap+staFelix Fietkau2023-09-28
| | | | | | | | | | | If the full interface is restarted while bringing up an AP, it can trigger a wpa_supplicant interface start before wpa_supplicant is notified of the allocated mac addresses. Fix this by moving the iface_update_supplicant_macaddr call to just after the point where mac addresses are allocated. Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mpc85xx: add Enterasys WS-AP3715i reset buttonDavid Bauer2023-09-27
| | | | | | | The reset button was missing from the Enterasys WS-AP3715i DTS. Add the node required for making the reset button work. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix mac address of interfaces created via wdev.ucFelix Fietkau2023-09-27
| | | | | | Use the wdev config with the generated MAC address Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: cf-ew72-v2: Add support for COMFAST CF-EW72 V2Alexey D. Filimonov2023-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for COMFAST CF-EW72 V2 Hardware: - SoC: Mediatek MT7621 (MT7621DAT or MT7621AT) - Flash: 16 MiB NOR - RAM: 128 MiB - Ethernet: Built-in, 2 x 1GbE - Power: only 802.3af PD on any port, injector supplied in the box - PoE passthrough: No - Wifi 2.4GHz: Mediatek MT7603BE 802.11b/g/b - Wifi 5GHz: Mediatek MT7613BEN 802.11ac/n/a - LEDs: 8x (only 1 is both visible and controllable, see below) - Buttons: 1x (RESET) Installing OpenWrt: Flashing is done using Mediatek U-Boot System Recovery Mode - make wired connection with 2 cables like this: - - PC (LAN) <-> PoE Injector (LAN) - - PoE Injector (POE) <-> CF-EW72 V2 (LAN). Leave unconnected to CF-EW72 V2 yet. - configure 192.168.1.(2-254)/24 static ip address on your PC LAN - press and keep pressed RESET button on device - power the device by plugging PoE Injector (POE) <-> CF-EW72 V2 (LAN) cable - wait for about 10 seconds until wifi led stops blinking and release RESET button - navigate from your PC to http://192.168.1.1 and upload OpenWrt *-factory.bin firmware file - proceed until router starts blinking with wifi led again (flashing) and stops (rebooting to OpenWrt) MAC addresses as verified by OEM firmware: vendor OpenWrt address LAN lan\eth0 label WAN wan label + 1 2g phy0 label + 2 5g phy1 label + 3 The label MAC address was found in 0xe000. LEDs detailed: The only both visible and controllable indicator is blue:wlan LED. It is not bound by default to indicate activity of any wireless interfaces. Place (WAN->ANT) | Num | GPIO | LED name (LuCI) | Note -----------------|-----|----------------------------------------------------------------------------------------- power | 1 | | | POWER LED. Not controlled with GPIO. hidden_led_2 | 2 | 13 | blue:hidden_led_2 | This LED does not have proper hole in shell. wan | 3 | | | WAN LED. Not controlled with GPIO. hidden_led_4 | 4 | 16 | blue:hidden_led_4 | This LED does not have proper hole in shell. lan | 5 | | | LAN LED. Not controlled with GPIO. noconn_led_6 | 6 | | | Not controlled with GPIO, possibly not connected wlan | 7 | 15 | blue:wlan | WLAN LED. Wireless indicator. noconn_led_8 | 8 | | | Not controlled with GPIO, possibly not connected mt76-phy0 and mt76-phy1 leds also exist in OpenWrt, but do not exist on board. Signed-off-by: Alexey D. Filimonov <alexey@filimonic.net>
* mpc85xx: drop WS-AP3715i label-macDavid Bauer2023-09-26
| | | | | | | Label MAC detection does not work properly, as MAC address is assigned on preinit. Thus, remove the label-mac definition. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: add support for Extreme Networks WS-AP391x series APsGlen Lee2023-09-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This in a single image to run many types of hardware in the AP391x series (AP3912/AP3915/AP3916/AP3917/AP7662). Hardware -------- Qualcomm IPQ4029 WiSoC 2T2R 802.11 abgn 2T2R 802.11 nac Macronix MX25L25635E SPI-NOR (32M) 512M DDR3 RAM 1-4x Gigabit Ethernet Senao EXT1025 HD Camera (AP3916 only) USB 2.0 Port (AP3915e only) 1x Cisco RJ-45 Console port - except for AP3916 and AP3912 where there is no external serial console and it is TDB how to solder one. Possibly J12 is UART with pin1 = 3.3V, pin2 = GND, pin3 = TXD, pin4 = RXD. - Settings: 115200 8N1 Installation With Serial Console -------------------------------- 1. Attach to the Console port. Power up the device and press the s key to interrupt autoboot. 2. The default username / password to the bootloader is admin / new2day 3. Check uboot variables using printenv, and update if necessary: $ setenv AP_MODE 0 $ setenv WATCHDOG_COUNT 0 $ setenv WATCHDOG_LIMIT 0 $ setenv AP_PERSONALITY identifi $ setenv serverip <SERVER_IPADDR> $ setenv ipaddr <UNIQUE_IPADDR> $ setenv MOSTRECENTKERNEL 0; ## OpenWRT only uses the primary image $ saveenv $ saveenv ## 2nd time to write the secondary copy 4. On the TFTP server located at <SERVER_IPADDR>, download the OpenWrt initramfs image. Rename and serve it as vmlinux.gz.uImage.3912 5. TFTP boot the OpenWrt initramfs image from the AP serial console: $ run boot_net 6. Wait for OpenWrt to start. Internet port sw-eth5 is assiged to LAN bridge and sw-eth4 (if available) is assigned to WAN. The LAN port will use default IP address 192.168.1.1 and run a DHCP server. If you already have a working DHCP server or already have 192.168.1.1 on your network you MUST DISCONNECT the LAN cable from your active network immediately after the power/status LED turns green! At this point, you need to temporarily reconfigure the AP to have a way to transfer the OpenWRT sysupgrade image to it. Reconfigure the newly converted OpenWRT AP using serial console or plug in a PC to a sw-eth5 as a separate network. Note -- the LAN/WAN port assignments were designed to make it possible to convert to OpenWRT without serial console and using a common firmware image for many AP models -- they may not make the most sense when fully deployed. 7. Download and transfer the sysupgrade image to the device using e.g. SCP. 8. Install OpenWrt to the device using "sysupgrade" $ sysupgrade -n /path/to/openwrt.bin 9. After it boots up again, as in step 6, connect to AP and reconfigure for final deployment. This build supports APs in the AP391x series and similar such as WiNG AP7662. Ethernet devices within OpenWRT are named "sw-eth1" thru "sw-eth5". Mapping from OpenWRT internal naming to external naming on the case is as follows: ``` |sw-eth1|sw-eth2|sw-eth3|sw-eth4|sw-eth5 ------------+-------+-------+-------+-------+------- AP3917 | | | | GE2 | GE1 ------------+-------+-------+-------+-------+------- AP7662 | | | | GE2 | GE1 ------------+-------+-------+-------+-------+------- AP3916 | | | | CAM* | GE1 ------------+-------+-------+-------+-------+------- AP3915 | | | | | GE1 ------------+-------+-------+-------+-------+------- AP3912 | | P1 | P2 | P3 | LAN1 ------------+-------+-------+-------+-------+------- ``` By default sw-eth4 is mapped to WAN. All others are assigned to the LAN. CAM* - On AP3916, sw-eth4 is the camera's interface. You should reconfigure this to be on LAN after OpenWRT boots from flash. Installation Without Serial Console ----------------------------------- The main premise is to set u-boot environment variables using the Extreme Networks firmware's rdwr_boot_cfg program. $ rdwr_boot_cfg Utility to manipulate the boot ROM config blocks All errors are written to the sytem log file (/tmp/log/ap.log) ``` Usage: rdwr_boot_cfg <read_all|read_var|read_var_f|write_var|rm_var> ... read_all read the entire active block read_var <var> read a single variable from the active block read_var_f <var> read a single variable from the active block (formatted) write_var <var=val> write a single variable/value pair to both blocks rm_var <var> delete a single variable from both blocks ``` WARNING: Be very sure you have set the u-boot environment correctly. If not, it can only be fixed by attaching serial console! Be aware that the Extreme Networks shell environment will automatically reboot every 5 minutes if there is no controller present. Read and understand these steps fully before attempting. It is easy to make mistakes! 1. Place the OpenWRT initramfs on the TFTP server and name it as vmlinux.gz.uImage.3912 2. Boot up to Extreme Networks WING-Campus mode OS. Port GE1/LAN1 will be a DHCP **client**. Find out the IP address from your DHCP server and SSH in. Default user/passwd is admin/new2day or admin/admin123. If it is booting to WING-Distributed mode, use this command to convert to Campus mode. $ operational-mode centralized 3. Upon bootup you have about 5mins to changed these u-boot variables if necessary using the rdwr_boot_cfg command in Linux shell: $ rdwr_boot_cfg write_var AP_MODE=0 $ rdwr_boot_cfg write_var MOSTRECENTKERNEL=0 $ rdwr_boot_cfg write_var WATCHDOG_COUNT=0 $ rdwr_boot_cfg write_var WATCHDOG_LIMIT=0 $ rdwr_boot_cfg write_var AP_PERSONALITY=identifi $ rdwr_boot_cfg write_var serverip=<SERVER_IPADDR> $ rdwr_boot_cfg write_var ipaddr=<UNIQUE_IPADDR> $ rdwr_boot_cfg write_var bootcmd="run boot_net" 4. Reboot AP. 5. Connect PC with ethernet to GE1/LAN1 port. You should get a DHCP address in the 192.168.1.x range and should be able to SSH to the new OpenWRT TFTP recovery/installation shell. 6. At this point, u-boot is still set to TFTP boot, so you have to replace the TFTP image with the original Extreme Networks image so that you can change the u-boot environment. See the instructions for Extracting Extreme Networks firmware image. DON'T REBOOT YET! 7. Next you must follow steps 6 thru 8 from the Installation with serial console. After which you should have OpenWRT installed to primary flash firmware. 8. Now Reboot. This time it will boot using TFTP into Extreme Networks image. You may need to reconnect cables at this point -- GE1/LAN1 will be a DHCP **client** and you can SSH in -- just like step 2. Get the IP address from you own DHCP server. 9. Set u-boot env as follows: $ rdwr_boot_cfg write_var MOSTRECENTKERNEL=0 $ rdwr_boot_cfg write_var WATCHDOG_COUNT=0 $ rdwr_boot_cfg write_var bootcmd="run boot_flash" 10. Reboot AP. This time it should be into OpenWRT. GE1/LAN1 will be a DHCP **server** and have static IP 192.168.1.1 -- just like step 5. 11. SSH into the LAN port and reconfigure to final configuration. Don't make any changes that prevent you from SSH or Luci access! Restoring Extreme Networks firmware ----------------------------------- Assuming you have the original Extreme Networks image: 1. Login to OpenWRT shell 2. scp the Extreme Networks packaged firmware image file AP391x-*.img to /tmp 3. Extract the firmware uimage file: $ tar xjf AP391x-*.img vmlinux.gz.uImage 4. Force run sysupgrade: $ sysupgrade -F /tmp/AP391x-*.img / 5. Restore the u-boot varable(s): $ rdwr_boot_cfg write_var WATCHDOG_LIMIT=3 USB 2.0 Port on AP3915e ----------------------- Enable this by setting LED "eth:amber_or_usb_enable" to ALWAYS ON. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Glen Lee <g2lee@yahoo.com>
* treewide: Add extra CPE identifierHauke Mehrtens2023-09-25
| | | | | | | This adds some Common Platform Enumerations (CPE) identifiers which I found. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: ZTE MF282 Plus fix sysupgradeAndreas Böhler2023-09-25
| | | | | | | While adding support for the MF282 Plus, an entry in platform.sh was overlooked - this fixes sysupgrade on this devices. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ipq40xx: ZTE MF287 fix sysupgradeAndreas Böhler2023-09-25
| | | | | | | While refactoring support for the MF287 series, an entry in platform.sh was overlooked - this fixes sysupgrade on this devices. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ipq40xx: drop patches/files/config for kernel 5.15Christian Marangi2023-09-25
| | | | | | | Drop patches/files/config for kernel 5.15 now that they are not used anymore. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: move to kernel 6.1 by defaultChristian Marangi2023-09-25
| | | | | | Move ipq40xx to kernel 6.1 by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add missing config TRUSTED_KEYS_TEEChristian Marangi2023-09-25
| | | | | | | Add missing config TRUSTED_KEYS_TEE for kernel 6.1 triggered when TRUSTED_KEYS is enabled. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: fix rare crash with AP+STA and ACS enabledFelix Fietkau2023-09-25
| | | | | | | Ensure that the iface disable in uc_hostapd_iface_start also clears the ACS state. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbolsOskari Rauta2023-09-25
| | | | | | | | CONFIG_DEVTMPFS_SAFE and CONFIG_DM_AUDIT were not set and had to be manually selected during build everytime kernel was updated. Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* base-files: ipcalc.sh: make check slightly more future-proofLeon M. Busch-George2023-09-25
| | | | | | | The previous code handling the equal-condition might be removed or altered in the future and the case might be overlooked. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* base-files: ipcalc.sh: turn error into warningLeon M. Busch-George2023-09-25
| | | | | | | | | | | | | | Some users have their routers configured to supply a DHCP range that includes the local interface address. That worked with dnsmasq because it automatically skips the local address. Re-enable those existing configurations for the release and hint at possible future problems. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu> [ wrap commit description and remove unecessary text ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* base-files: ipcalc.sh clarify range parameters in commentLeon M. Busch-George2023-09-25
| | | | | | | | To avoid confusion when working with ipcalc.sh, clarify that the last two parameters belong to the range calculation and rename 'num' to the slightly less ambiguous 'size'. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* package: dnsmasq: remove off-by-one mitigation for limitLeon M. Busch-George2023-09-25
| | | | | | | | | In the dnsmasq init script, an off-by-one in the range calculation of ipcalc.sh was mitigated by passing the limit as if its counting started at zero. This patch removes the mitigation as the off-by-one has been fixed. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* package: avoid the use of eval to parse ipcalc.sh outputLeon M. Busch-George2023-09-25
| | | | | | | | | | | Add a function 'ipcalc' to /lib/functions.sh that sets variables more safely using export. With this new function, dnsmasq also handles the return value of ipcalc correctly. Fixes: e4bd3de1be8e ("dnsmasq: refuse to add empty DHCP range") Co-Authored-By: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* base-files: ipcalc.sh: don't print broadcast addr for prefix > 30Leon M. Busch-George2023-09-25
| | | | | | | | | | Printing a broadcast address doesn't make any sense for /31 and /32 prefixes. Strictly speaking, the same goes for the network address but it is useful to get the first address in the prefix, e.g. to create a canonical CIDR notation "$NETWORK/$PREFIX". Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* base-files: ipcalc.sh: correctly set limit for prefix > 30Leon M. Busch-George2023-09-25
| | | | | | | | For /31 and /32 prefixes, there are only host addresses - no network and broadcast address with all-zero and all-one bits. Reflect this when setting the limit. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* base-files: ipcalc.sh: correctly interpret num parameterLeon M. Busch-George2023-09-25
| | | | | | | | The start and end addresses are inclusive. Thus, adding num without substracting one results in num + 1 addresses. Add the substraction and to implement the documented behaviour. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* build: replace SourceName with PKG_NAME compile unit nameFlorian Eckert2023-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the same information is stored at the Packages.manifest in the 'Package:' variable and also additionally in the 'SourceName:' variable. So we have for Packages.manifest for strongswan-charon-cmd: ``` Package: strongswan-charon-cmd Version: 5.9.11-1 SourceName: strongswan-charon-cmd License: GPL-2.0-or-later Section: net ``` This is not correct. Several installable packages are built from the same strongswan source. Therefore it makes more sense that the source name is really the source name. In this case the it is 'strongswan'. After this change the Packages.manifest for strongswan-charon-cmd: ``` Package: strongswan-charon-cmd Version: 5.9.11-1 SourceName: strongswan License: GPL-2.0-or-later Section: net ``` In summary. The 'Package' name is the name of the package to be installed on the target system. The 'SourceName' is the compile unit from which the package was build from. This must be the same for all installable packages built from the same compile unit. This commit fixes that. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Powered by cgit, Themed by Ted Yin.