aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* hostapd: fix broken WPS on broadcom-wl and ath11kPetr Štetiar2023-11-01
| | | | | | | | | | | | | | | | | | | | Upgrading wpa_supplicant from 2.9 to 2.10 breaks broadcom-wl/ath11k based adapters. The reason for it is hostapd tries to install additional IEs for scanning while the driver does not support this. The kernel indicates the maximum number of bytes for additional scan IEs using the NL80211_ATTR_MAX_SCAN_IE_LEN attribute. Save this value and only add additional scan IEs in case the driver can accommodate these additional IEs. Bug: http://lists.infradead.org/pipermail/hostap/2022-January/040178.html Bug-Debian: https://bugs.debian.org/1004524 Bug-ArchLinux: https://bugs.archlinux.org/task/73495 Upstream-Status: Changes Requested [https://patchwork.ozlabs.org/project/hostap/patch/20220130192200.10883-1-mail@david-bauer.net] Reported-by: Étienne Morice <neon.emorice@mail.com> Tested-by: Étienne Morice <neon.emorice@mail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: add CycloneDX SBOM JSON supportPetr Štetiar2023-11-01
| | | | | | | | | | | | | CycloneDX is an open source standard developed by the OWASP foundation. It supports a wide range of development ecosystems, a comprehensive set of use cases, and focuses on automation, ease of adoption, and progressive enhancement of SBOMs (Software Bill Of Materials) throughout build pipelines. So lets add support for CycloneDX SBOM for packages and images manifests. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* package-dumpinfo,metadata: add ABI version information to package indexPetr Štetiar2023-11-01
| | | | | | | | | There is no standard for ABI versioning, so its not possible to find out from `libext2fs2`, `libiwinfo20230701` or `libss2` package names if thats just package name or package name with ABI version included. To help with the decision, lets make ABI version aviable in package index. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* package-metadata: add CPE information to JSON package manifestsPetr Štetiar2023-11-01
| | | | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. In order for the information to be processed further, it should also be available in JSON package manifests. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* package-dumpinfo: add CPE information to package indexPetr Štetiar2023-11-01
| | | | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. In order for the information to be processed further, it should also be available in package index files. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-mediatek: fix determine the size of an uImage.FIT using 'imsz' or 'imszb'.Jianhui Zhao2023-10-31
| | | | | | | It must read the entire image for previous code of 'imsz' or 'imszb'. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com> Suggested-by: Chuanhong Guo <gch981213@gmail.com>
* uqmi: update to latest HEADDavid Bauer2023-10-31
| | | | | | eea2924 uqmi: add slot number to uim-sim-status output Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix OWE association with mbedtlsDavid Bauer2023-10-31
| | | | | | | | | | | | | | | | The code for hostapd-mbedtls did not work when used for OWE association. When handling association requests, the buffer offsets and length assumptions were incorrect, leading to never calculating the y point, thus denying association. Also when crafting the association response, the buffer contained the trailing key-type. Fix up both issues to adhere to the specification and make hostapd-mbedtls work with the OWE security type. Signed-off-by: David Bauer <mail@david-bauer.net>
* uqmi: configure PDP type and APN to modemDavid Bauer2023-10-31
| | | | | | | | | | | | | | Configure the PLMN and APN to the modem. This is required in cases, where either the SGSN or GGSN does not permit the selection of IPv4v6 pdp type. Previously, the modem always tried to establish a dual-stacked PDP context regardless of the configured PDP type in uci. As this setting can not be parameterized when creating a WDS context, configure it to the modems internal list of profiles. This way, the PDP type is taken into account when creating the WDS context. Signed-off-by: David Bauer <mail@david-bauer.net>
* uqmi: fix non-working PLMN selectionDavid Bauer2023-10-31
| | | | | | | | | | | | | | The PLMN selection was reset when calling network-register, thus rendering the sepcific selection of a carrier unapplied. Set the PLMN selection after executing network-register. This seems to cause the modem to re-select the carrier eventually. That being said, qmi does allow the parameterization of the network-register to include dpecific PLMN settings, however this is currently not implemented in uqmi. Signed-off-by: David Bauer <mail@david-bauer.net>
* uqmi: set RAT preference before attachDavid Bauer2023-10-31
| | | | | | | | | | Set the RAT preference before attaching. This handles cases better, where a network might be available but not with the preferred RAT. If RAT is changed to a non-available RAT after attach, QMI does not fail with missing registration but with failing to establish a PDP session. Signed-off-by: David Bauer <mail@david-bauer.net>
* uqmi: increase wait time before checking connection stateDavid Bauer2023-10-31
| | | | | | | | | | | | | Increase the wait time before polling the connection state for the first time. Depending on the prior state of the modem, the first poll might still return a connected state. The script then tries to establish a PDP session, which subsequently fails as the modem by then is in scan state. Increasing the wait-time to 3 seconds mitigates this from happening. Signed-off-by: David Bauer <mail@david-bauer.net>
* uqmi: add illegal SIM state recoveryDavid Bauer2023-10-31
| | | | | | | | | | | On some network-triggered disconnections the UIM state might end up in "illegal". This prevents the modem from attaching to any network in non-restricted service modes. Detect this state and reset the SIM card. This way, the modem can attach to networks again. Signed-off-by: David Bauer <mail@david-bauer.net>
* uqmi: don't block restart on failed registrationDavid Bauer2023-10-31
| | | | | | | | | | Failing the registration does not necessarily mean we can not bring this interface up. For example, roaming SIM cards are possibly steered by the home-operator. Don't block restart of the QMI interface in this case. Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: add support for Mellanox Spectrum SN2000 SwitchesTil Kaiser2023-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Mellanox Spectrum SN2000 Series Switches are Managed Ethernet Switches with a maximum speed of 100Gb/s and up to 56 ports. Tested on a Mellanox Spectrum SN2100 with the following specs: - CPU: Intel ATOM x86 dual-core 2.4GHz - RAM: 8GB - Disk: 16GB SSD - Ports: 16x QSFP28 100GbE, 1x 100M Mgmt Port, 1x RJ45 Serial Port - USB: 1x mini 2.0 - Button: 1x (reset) - LEDs: 6x Installation: - Create a bootable USB device (either by flashing this image onto it or another Linux distribution) - Unzip the generic OpenWrt x64 image and copy it onto the USB device - Plug the USB device into the Mellanox Switch and boot from it - Flash the image (e.g., with dd) onto the internal SSD of the switch (should be /dev/sda) To enter the BIOS, reboot the switch and press CTRL+B while you see the BIOS information text (American Megatrends …). The default password to enter the BIOS is admin. To boot from the USB device, switch to the Boot index tab and set your USB device at the top of the boot order (the internal SSD should be currently there). Don't forget to set the SSD back at the top after you have flashed the image. Signed-off-by: Til Kaiser <til.kaiser@gmx.de> [unify with generic x64 image] Signed-off-by: David Bauer <mail@david-bauer.net>
* packages: add needed packages for Mellanox Spectrum SwitchesTil Kaiser2023-10-31
| | | | | | | Add needed kernel and firmware packages for Mellanox Spectrum SN2000 Series Switches. Signed-off-by: Til Kaiser <til.kaiser@gmx.de>
* filogic: add support for ASUS TUF AX6000Patryk Kowalczyk2023-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware ======== SOC: MediaTek MT7986 RAM: 512MB DDR3 FLASH: 256MB SPI-NAND WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz 4T4R ETH: MediaTek MT7530 Switch (LAN) MaxLinear GPY211C 2.5 N-Base-T PHY (WAN) MaxLinear GPY211C 2.5 N-Base-T PHY (LAN) UART: 3V3 115200 8N1 (Do not connect VCC) USB 3.1 Installation ============ Download the OpenWrt initramfs image. Copy the image to a TFTP server reachable at 192.168.1.70/24. Rename the image to TUF-AX6000.bin. Connect to the serial console, interrupt the auto boot process by pressing '4' when prompted or press '1' and set client IP, server IP and name of the image. yOU don't need to open the case or even soldering anything. use three goldpin wires, remove their plastic cover and connect them to the console pinout via the case holes. You can see three holes From Bottom: RX, TX, Ground - partially covered Download & Boot the OpenWrt initramfs image. In case of option '4' $ setenv ipaddr 192.168.1.1 $ setenv serverip 192.168.1.70 $ tftpboot 0x46000000 TUF-AX6000.bin $ bootm 0x46000000 In case of option '1' 1: Load System code to SDRAM via TFTP. Please Input new ones /or Ctrl-C to discard Input device IP (192.168.1.1) ==: Input server IP (192.168.1.70) ==: Input Linux Kernel filename (TUF-AX6000.trx) ==: Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Missing features ================ 2.5Gb LAN port LED is ON during boot or when the LAN cable is disconnected The cover yellow light is not supported. (only blue one) Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
* mac80211: ath: add struct_group for struct ath_cycle_countersShiji Yang2023-10-31
| | | | | | | | | | | | | | | | Add a struct_group to around all members in struct ath_cycle_counters. It can help the compiler detect the intended bounds of the memcpy() and memset(). This patch fixes the following build warning: In function 'fortify_memset_chk', inlined from 'ath9k_ps_wakeup' at /home/db/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/backports-6.1.24/drivers/net/wireless/ath/ath9k/main.c:140:3: ./include/linux/fortify-string.h:314:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 314 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: fix mtd/NVMEM regression affecting U-Boot env NVMEM driverRafał Miłecki2023-10-31
| | | | | | Fixes: b5956700702b ("kernel: backport nvmem v6.6 fixes and v6.7 changes") Fixes: https://github.com/openwrt/openwrt/issues/13831 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: add support for IIJ SA-W2INAGAKI Hiroshi2023-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Internet Initiative Japan Inc. (IIJ) SA-W2 is a network appliance with 11ac (Wi-Fi 5) wlan, based on 88F6810. Specification: - SoC : Marvell Armada 380 88F6810 - RAM : DDR3 256 MiB (Micron MT41K64M16TW-107:J x2) - Flash : SPI-NOR 32 MiB (Winbond W25Q256JVFIQ) - WLAN : 2.4/5 GHz, Mini PCI-E - 2.4 GHz : Silex SX-PCEGN (Atheros AR9287 (2T2R)) - 5 GHz : Silex SX-PCEAC (Qualcomm Atheros QCA9880 (3T3R)) - Ethernet : 10/100/1000 Mbps x5 - Switch : Marvell 88E6172 - LEDs/Keys : 12x/1x - UART : "CONSOLE" port (RJ-45, RS-232C) - settings : 115200n8 - assignment: 1:NC, 2:NC, 3:TXD, 4:GND, 5:GND, 6:RXD, 7:NC, 8:NC - note : compatible with Cisco console cable - Power : DC Input or PoE - DC Input : 12 VDC, 3 A - PoE : 802.3af - module : Silvertel Ag9712-2BR - note : USB ports shouldn't be used when powered by PoE - Bootloader : PMON2000 based - Stock : NetBSD based Flash instruction using sysupgrade image: 1. Prepare TFTP server with IP address 192.168.0.10 and put sysupgrade image to TFTP directory 2. Connect PC to "GE0/PoE" port on SA-W2 3. Power on SA-W2, interrupt count-down by Esc and enter to bootloader CLI 4. Set IP address of the device address 192.168.0.1 5. Download sysupgrade image and flash to storage tftpload 192.168.0.10 <image name> firmwrite example: #tftpload 192.168.0.10 openwrt-mvebu-cortexa9-iij_sa-w2-squashfs-sysupgrade.bin Loading openwrt-mvebu-cortexa9-iij_sa-w2-squashfs-sysupgrade.bin loaded 8127268 byte(s) #firmwrite Erasing FLASH block 32 Done 0x00200000. Erasing FLASH block 33 Done 0x00210000. ... Erasing FLASH block 155 Done 0x009b0000. Erasing FLASH block 156 Done 0x009c0000. Programming FLASH. Done. Verifying FLASH. No Errors found. 6. Check the flashed firmware firmcheck example: #firmcheck [Normal firmware] ident: 'SEIL2015' copyright: 'ARM OpenWrt Linux-5.15.93' version format: 1 version major: 9 version minor: 99 version release: 'r22060+36-5163bb5e54' body size: 3578524 checksum: 0x8a083cb8 [Rescue firmware] ident: 'SEIL2015' copyright: 'Copyright (c) 2017 Internet Initiative Japan Inc. All rights reserved.' version format: 1 version major: 3 version minor: 70 version release: 'Release' body size: 10152458 checksum: 0x8f9518c2 7. Boot with the flashed firmware boot Note: - The bootloader on this device is not U-Boot and it's environment space ("bootloader-env") has no compatibility with U-Boot tools. - eth1 is connected to port6 of 88E6172 switch, but multi-cpu port can't be handled on Linux Kernel and not defined. - Powering by PoE hasn't been tested yet. - This device has 2x OS images on flash and they can be switched by setting "BOOTDEV" variable on bootloader CLI. That variable supports the following values: - "flash" : primary image on flash ("firmware") - "rescue": secondary image on flash ("rescue") - "usb" : usb storage (broken?) - "lan0/1": network command to set: set BOOTDEV=<dev> example: set BOOTDEV=rescue This commit also supports booting from secondary partition. - To execute initramfs image on bootloader CLI, use "go" command. ("go" command is not listed on the output of "help", but available) example (download and execute): address 192.168.0.1 tftpload 192.168.0.10 openwrt-mvebu-cortexa9-iij_sa-w2-initramfs-kernel.bin go MAC addresses: LAN : 00:E0:4D:xx:xx:19 (none) WAN : 00:E0:4D:xx:xx:18 (board_info, 0x6 (hex)) 2.4 GHz: 84:25:3F:xx:xx:xx (Mini PCI-E card) 5 GHz : 84:25:3F:xx:xx:xx (Mini PCI-E card) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mvebu: cortexa9: enable seil-fw mtdsplit driverINAGAKI Hiroshi2023-10-31
| | | | | | Enable seil-fw driver on mvebu/cortexa9 to use it on IIJ SA-W2. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: add seil-fw mtdsplit driver for IIJ SEIL devicesINAGAKI Hiroshi2023-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mtdsplit parser driver parses firmware partition on Internet Initiative Japan Inc. (IIJ) SEIL series devices. Structure of header: 0x0 - 0x7 : Identifier (hex) 0x8 - 0x57: Copyright (ascii) 0x58 - 0x5b: Data CRC (hex) 0x5c - 0x5f: Image Format Version (hex) 0x60 - 0x63: Image Major Version (hex) 0x64 - 0x67: Image Minor Version (hex) 0x68 - 0x87: Image Release Version (ascii) 0x88 - 0x8b: Xor value for Data? (hex) 0x8c - 0x8f: Data Length (hex) Properties: - compatible : "iij,seil-firmware" - iij,seil-id : ID of SEIL firmware for the device (8 bytes) - examples: - SA-W2 : <0x5345494c 0x32303135> ("SEIL2015") - SEIL/X1 : <0x5345494c 0x2F582020> ("SEIL/X ") - iij,bootdev-name: boot device name assigned to the partition (optional) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: enable wireless LEDs activity blinking for TP-Link EC330-G5u v1Mikhail Zhilkin2023-10-31
| | | | | | | This commit enables wireless LEDs activity blinking for TP-Link EC330-G5u v1 router. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ath79: add support for GL.iNet GL-S200Weiping Yang2023-10-31
| | | | | | | | | | | | | | | | | | | | | | | Specifications: SoC: QCA9531(650MHz) RAM: DDR2 128M Flash: SPI NOR 16M + SPI NAND 128M WiFi: 2.4GHz with 2 antennas(WiFi/Thread) Ethernet: 1xLAN(10/100M) 2xWAN(10/100M) Button: 1x Reset Button Switch: 1x Mode switch LED: 1x Blue LED + 1x White LED + 1x Orange LED IOT: Thread + ZigBee/Zwave By uboot web failsafe: Push the reset button for 5 seconds util the power led flash faster, then use broswer to access http://192.168.1.1 Afterwards upgrade can use sysupgrade image. Signed-off-by: Weiping Yang <weiping.yang@gl-inet.com>
* hostapd: do not trim trailing whitespace, except for newlineFelix Fietkau2023-10-31
| | | | | | Fixes adding SSID or key with trailing whitespace Signed-off-by: Felix Fietkau <nbd@nbd.name>
* devcontainer: Add development environment for gihub codespaceHauke Mehrtens2023-10-30
| | | | | | | | This adds a configuration for github codespace using our buildbot container. This allows users to start VS code in the browser using the buildbot build container. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/elfutils: add missing dependency to fix build errorFelix Fietkau2023-10-30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: increase the rfkill debounce interval for TP-Link Archer C7 v2Shiji Yang2023-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Due to circuit issue or silicon defect, sometimes the WiFi switch button of the Archer C7 v2 can be accidentally triggered multiple times in one second. This will cause WiFi to be unexpectedly shut down and trigger 'irq 23: nobody cared'[1] warning. Increasing the key debounce interval to 1000 ms can fix this issue. This patch also add the missing rfkill key label. [1] Warning Log: ``` [87765.218511] irq 23: nobody cared (try booting with the "irqpoll" option) [87765.225331] CPU: 0 PID: 317 Comm: irq/23-keys Not tainted 5.15.118 #0 ... [87765.486246] handlers: [87765.488543] [<85257547>] 0x800c29a0 threaded [<5c6328a2>] 0x80ffe0b8 [gpio_button_hotplug@4cf73d00+0x1a00] [87765.498364] Disabling IRQ #23 ``` Fixes: https://github.com/openwrt/openwrt/issues/13010 Fixes: https://github.com/openwrt/openwrt/issues/12167 Fixes: https://github.com/openwrt/openwrt/issues/11191 Fixes: https://github.com/openwrt/openwrt/issues/7835 Tested-by: Hans Hasert Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix Gigabit Ethernet port of the HiWiFi HC5861Shiji Yang2023-10-29
| | | | | | | | HiWiFi HC5861 has a GbE port which connected to the RTL8211E PHY chip. This patch adds the missing Realtek PHY driver package and sets the correct external PHYs base address to make it work again. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: Add firmware package for MT7922Daniel Danzberger2023-10-29
| | | | | | Adds the 2 required firmware files for MT7922 chips. Signed-off-by: Daniel Danzberger <dd@embedd.com>
* iptables: opt-out of lto usageAnari Jalakas2023-10-29
| | | | | | | | | | | This fixes building with USE_LTO enabled. <artificial>:(.text+0xc22): relocation R_MIPS16_26 against `libxt_DNAT_init' cannot be used when making a shared object; recompile with -fPIC ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: non-dynamic relocations refer to dynamic symbol printf ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>
* lua: opt-out of lto usageAnari Jalakas2023-10-29
| | | | | | | | | | | This fixes building with USE_LTO enabled. <artificial>:(.text+0xcc8): relocation R_MIPS16_26 against `luaL_argerror' cannot be used when making a shared object; recompile with -fPIC ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: non-dynamic relocations refer to dynamic symbol strcpy ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>
* libsepol: opt-out of lto usageAnari Jalakas2023-10-29
| | | | | | | | | | | This fixes building with USE_LTO enabled. <artificial>:(.text+0x4194): relocation R_MIPS16_26 against `cil_printf.lto_priv.0' cannot be used when making a shared object; recompile with -fPIC ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: non-dynamic relocations refer to dynamic symbol memcmp ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>
* libselinux: opt-out of lto usageAnari Jalakas2023-10-29
| | | | | | | | | | | This fixes building with USE_LTO enabled: <artificial>:(.text.exit+0x6e): relocation R_MIPS16_26 against `pthread_key_delete' cannot be used when making a shared object; recompile with -fPIC ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: non-dynamic relocations refer to dynamic symbol stpcpy ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>
* iwinfo: opt-out of lto usageAnari Jalakas2023-10-29
| | | | | | | | | | | This fixes building with USE_LTO enabled. <artificial>:(.text+0x400c): relocation R_MIPS16_26 against `iwinfo_close' cannot be used when making a shared object; recompile with -fPIC ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: non-dynamic relocations refer to dynamic symbol strcpy ./openwrt/staging_dir/toolchain-mips_24kc_gcc-12.3.0_musl/lib/gcc/mips-openwrt-linux-musl/12.3.0/../../../../mips-openwrt-linux-musl/bin/ld.bfd: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>
* build: hide kmod-zram config unless enabledRani Hod2023-10-29
| | | | | | | | | Currently the zram default compressor choice is displayed whether or not zram is activated. Since the default choice is lzo-rle, this adds a false dependency on kmod-lib-lzo. With this patch, the choice options appear only when activating zram. Signed-off-by: Rani Hod <rani.hod@gmail.com>
* ramips: add support for ZyXEL LTE5398-M904Milan Krstic2023-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZyXEL LTE5398-M904 is a dual band 802.11ac indoor LTE/3G CPE with an FXS port. Specifications: * SoC: Mediatek MT7621AT * RAM: 256 MB * Flash: 128MB NAND (MX30LF1G18AC) * WiFi: MediaTek MT7603 2.4G + MediaTek MT7615 5G * Switch: 2 GbE ports MT7530 * LTE/3G: Quectel EG18-EA LTE-A Cat. 18 * SIM: 1 micro-SIM card slot * Buttons: Reset, WPS * LEDs: power (G/B), internet (G), LTE (R/G/Orange), WiFi (G), voice (G) * VoIP: 1 FXS RJ11 port * Power: 12V, 2A UART serial console: 57600,8N1 Unpopulated header J5: [o] GND [ ] key - no pin [o] RX [o] TX [o] 3.3V Vcc Installation: * Log in as root using ssh to 192.168.1.1 * scp OpenWrt initramfs-recovery.bin image to root@192.168.1.1:/tmp/ * Prepare bootloader config by running: nvram setro uboot DebugFlag 0x1 nvram setro uboot CheckBypass 0 nvram commit * Run "mtd_write -w write /tmp/initramfs-recovery.bin Kernel" and reboot * Wait for OpenWrt to boot and ssh to root@192.168.1.1 * Run sysupgrade with OpenWrt squashfs-sysupgrade.bin image For mode details about flashing see: 2449a63208 (ramips: mt7621: Add support for ZyXEL NR7101, 2021-04-19) Unsupported: * FXS/Voice Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
* firmware-utils: bump to git HEADHauke Mehrtens2023-10-29
| | | | | | | | | | | | | | | a170683 firmware-utils: fix use of NULL string progname 89875fc tplink-safeloader: CPE510: add Canadian support 9e211d2 mktplinkfw2: add support to extract bootloader images c18f662 mktplinkfw2: add support to pack bootloader 3dc1339 mktplinkfw2: show exact exceed bytes when the image is to big d16ff79 tplink-safeloader: WPA8631: add v4 AU, US 0fa1cc5 zytrx: add LTE5398-M904 6354661 firmware-utils: ptgen: add SiFive GPT partition support The removed patch was applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix compile issues with tools/ on macOSFelix Fietkau2023-10-29
| | | | | | | Reduce dependencies on linux specific header files. Avoid using __weak for function declarations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* elfutils: fix build and enable on non-linux systemsFelix Fietkau2023-10-29
| | | | | | Use gnulib for compatibility Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/include: add more endian macrosFelix Fietkau2023-10-29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qualcommax: only build initramfs if CONFIG_TARGET_ROOTFS_INITRAMFS is setFlorian Maurer2023-10-29
| | | | | | This makes it possible to build the ipq807x netgear-wax218 without initramfs - which is required for downstream projects (gluon) Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* qualcommax: mark upstreamed patches as suchRobert Marko2023-10-29
| | | | | | The GPLL fixes were merged upstream, so lets mark them as such. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: fix jffs2 compilation with GCC_PLUGIN_RANDSTRUCT enabledMatt Merhar2023-10-28
| | | | | | | | | | | | | Designated initializers are required when using the randstruct GCC plugin, otherwise an error like the following is seen: ./include/linux/lzma.h:60:31: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] This was originally applied via 55643e469c21, but was unintentionally reverted in 483503603cb2. Fixes: 483503603cb2 ("generic: 5.15: rework pending patch") Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* mvebu: add support for Fortinet FortiGate 30EINAGAKI Hiroshi2023-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fortinet FortiGate 30E (FG-30E) is a UTM, based on Armada 385 (88F6820). Specification: - SoC : Marvell Armada 385 88F6820 - RAM : DDR3 1 GiB (4x Micron MT41K256M8DA-125, "D9PSH") - Flash : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G) - Ethernet : 5x 10/100/1000 Mbps - Switch : Marvell 88E6176 - LEDs/Keys : 16x/1x - UART : "CONSOLE" port (RJ-45, RS-232C level) - port : ttyS0 - settings : 9600bps 8n1 - assignment : 1:NC , 2:NC , 3:TXD, 4:GND, 5:GND, 6:RXD, 7:NC , 8:NC - note : compatible with Cisco console cable - HW Monitoring: nuvoTon NCT7802Y - Power : 12 VDC, 2 A - plug : Modex 5557-02R Flash instruction using initramfs image: 1. Power on FG-30E and interrupt to show bootmenu 2. Call "[I]: System information." -> "[S]: Set serial port baudrate." and set baudrate to 9600 bps 3. Call "[R]: Review TFTP parameters.", check TFTP parameters and connect computer to "Image download port" in the parameters 4. Prepare TFTP server with the parameters obtained above 5. Rename OpenWrt initramfs image to "image.out" and put to TFTP directory 6. Call "[T]: Initiate TFTP firmware transfer." to download initramfs image from TFTP server 7. Type "r" key when the following message is showed, to boot initramfs image without flashing to spi-nor flash "Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?" 8. On initramfs image, backup mtd if needed minimum: - "firmware-info" - "kernel" - "rootfs" 9. On initramfs image, upload sysupgrade image to the device and perform sysupgrade 10. Wait ~200 seconds to complete flashing and rebooting. If the device is booted with stock firmware, login to bootmenu and call "[B]: Boot with backup firmware and set as default." to set the first OS image as default and boot it. Notes: - Both colors of Bi-color LEDs on the front panel cannot be turned on at the same time. - "PWR" and "Logo" LEDs are connected to power source directly. - The following partitions are added for OpenWrt. These partitions are contained in "uboot" partition (0x0-0x1fffff) on stock firmware. - "firmware-info" - "dtb" - "u-boot-env" - "board-info" Image header for bootmenu tftp: 0x0 - 0xf : ? 0x10 - 0x2f : Image Name 0x30 - 0x17f: ? 0x180 - 0x183: Kernel Offset* 0x184 - 0x187: Kernel Length* 0x188 - 0x18b: RootFS Offset (ext2)* 0x18c - 0x18f: RootFS Length (ext2)* 0x190 - 0x193: DTB Offset 0x194 - 0x197: DTB Length 0x198 - 0x19b: Data Offset (jffs2) 0x19c - 0x19f: Data Length (jffs2) 0x1a0 - 0x1ff: ? *: required for initramfs image MAC addresses: (eth0): 70:4C:A5:xx:xx:CE (board-info, 0xd880 (hex)) WAN : 70:4C:A5:xx:xx:CF LAN 1 : 70:4C:A5:xx:xx:D0 LAN 2 : 70:4C:A5:xx:xx:D1 LAN 3 : 70:4C:A5:xx:xx:D2 LAN 4 : 70:4C:A5:xx:xx:D3 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mac80211: compile kconf with host gccZeyu Dong2023-10-28
| | | | | | | | | | Fix the building issue setting CC to KERNEL_CC in kernel.mk. The kernel backports by default uses CC to compile kconf. A new patch is added to mac80211 to compile kconf with host gcc. Signed-off-by: Zeyu Dong <dzy201415@gmail.com> [ refresh patches ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* build: cache kernel module package compilingZeyu Dong2023-10-28
| | | | | | | | | | Kernel module packages compiling is not cached (e.g. mac80211) even with CONFIG_CCACHE on. CC should be set to KERNEL_CC in KERNEL_MAKE_FLAGS at kernel.mk to allow kernel module packages using ccache. Signed-off-by: Zeyu Dong <dzy201415@gmail.com>
* odhcpd: Bump to latest commitsKevin Darbyshire-Bryant2023-10-28
| | | | | | | d8118f6 config: make sure timer is not on the timeouts list before freeing 4bbc6e7 add hostsfile output in addition to statefile Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* uboot-mediatek: Sync phy-mode for Xiaomi Redmi Router AX6000Furong Xu2023-10-28
| | | | | | | | | | | Commit 572ea6807053 ("uboot-mediatek: add patches for MT7988 and builds for RFB") renamed HSGMII to 2500basex, but forgot to update the dts of Redmi Router AX6000, makes the network unusable. This patch makes the network usable again. Fixes: #13724 Fixes: 572ea6807053 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: Furong Xu <xfr@outlook.com>
* qualcommax: ipq807x: add support for Netgear WAX630Kristian Skramstad2023-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ``` Specifications: * CPU: Qualcomm IPQ8074A, SoC Version: 2.0, Quad core 1651 MHz * RAM: 1 GiB of DDR3 466 MHz * Flash: NAND 512 MiB (Winbond W29N04GZ) * 6 RGB LEDs: Power, LAN1, LAN2, 2.4GHz, 5GHz H and 5GHz L * UART: One 4-pin populated header next to the heatsink and a chip. GND RXD TXD, beginning from the external antennas. 115200n8. Lan: * One 100/1000/2.5GBASE-T Gigabit Ethernet 802.3bt/at * One 100/1000 Gigabit Ethernet Wlan: * 4x4 in 2.4GHz : 802.11b/g/n/ax * 4x4 in 5.0GHz L: 802.11a/n/ac/ax * 4x4 in 5.0GHz H: 802.11a/n/ac/ax * OFDM and OFDMA * Bidir and MU-MIMO * Internal antenna 2.86/4.41/4.98 dBi (2.4GHz/5GHz L/5GHz H) Power: * 802.3bt/at 30.1W * DC 12V/3.5A Mounting: Wall and ceiling ``` ``` 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect to the console on the AP, and connect the LAN port to your LAN 3. Stop auto boot to get to U-boot shell, interrupt the autoboot process by pressing '0' when prompted 4. Set active_fw in env 4. Set active_fw in env # setenv active_fw 1 5. Transfer the initramfs image with TFTP # setenv serverip 192.168.1.10 (IP of TFTP server host) # setenv ipaddr 192.168.1.1 (IP used by the router for getting the image, must be in the same subnet as the TFTP host) # tftpboot openwrt-qualcommax-ipq807x-netgear_wax630-initramfs-uImage.itb 6. Reboot and load the image # bootm 7. SCP factory image to the AP # scp openwrt-qualcommax-ipq807x-netgear_wax630-squashfs-factory.ubi root@192.168.1.1:/tmp/ 8. Connect to device using SSH (use the LAN port) 9. Flash squashfs-factory.ubi from within the initramfs instance of OpenWRT Before you flash, please check your mtd partitions where mtdX is the right mtd rootfs partition. # cat /proc/mtd (To check MTD partitions) # ubiformat /dev/mtd18 -y -f /tmp/openwrt-qualcommax-ipq807x-netgear_wax630-squashfs-factory.ubi 10. Set active_fw to 0 # /usr/sbin/fw_setenv active_fw 0 11. Reboot the AP and your done # reboot ``` Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Kristian Skramstad <kristian+github@83.no>
Powered by cgit, Themed by Ted Yin.