aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* generic: 6.1: add patch enabling assisted learning for qca8kChristian Marangi2023-10-06
| | | | | | | Add patch enabling assisted learning for qca8k to fix roaming issue between BSS and BSS on the same L2 broadcast domain. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: fix compilation warning for CONFIG_PROC_STRIPPEDChristian Marangi2023-10-06
| | | | | | | | | | | | | | Fix compilation warning for CONFIG_PROC_STRIPPED for kernel 6.1. Fix compilation warning: make[4]: Leaving directory '/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-ath79_tiny/linux-6.1.55' net/ipv4/inet_timewait_sock.c: In function '__inet_twsk_schedule': net/ipv4/inet_timewait_sock.c:272:22: error: unused variable 'kill' [-Werror=unused-variable] 272 | bool kill = timeo <= 4*HZ; | ^~~~ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: add missing config SPI_BCM63XX_HSSPIChristian Marangi2023-10-06
| | | | | | | Add missing config SPI_BCM63XX_HSSPI for kernel 6.1 triggered on compilation of bcm4908. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ath79: mikrotik: fix build error with kernel 6.1Koen Vandeputte2023-10-06
| | | | | | | | | | | | | | | | drivers/mfd/rb4xx-cpld.c:167:19: error: initialization of 'void (*)(struct spi_device *)' from incompatible pointer type 'int (*)(struct spi_device *)' [-Werror=incompatible-pointer-types] 167 | .remove = rb4xx_cpld_remove, | ^~~~~~~~~~~~~~~~~ drivers/mfd/rb4xx-cpld.c:167:19: note: (near initialization for 'rb4xx_cpld_driver.remove') cc1: some warnings being treated as errors make[8]: *** [scripts/Makefile.build:250: drivers/mfd/rb4xx-cpld.o] Error 1 make[7]: *** [scripts/Makefile.build:500: drivers/mfd] Error 2 make[6]: *** [scripts/Makefile.build:500: drivers] Error 2 make[5]: *** [Makefile:2012: .] Error 2 As the allocated function does nothing, simply delete it. Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* generic: rtl8366_smi: rename and drop conflicting vlan GPL symbolsChristian Marangi2023-10-06
| | | | | | | | | | | | Symbol rtl8366_enable_vlan and rtl8366_reset_vlan are also present in the DSA driver upstream and conflicts as they are EXPORTED. Rename them to rtl8366_smi_enable_vlan and rtl8366_smi_reset_vlan to fix the conflict. While at it also make them static and drop the EXPORT_SYMBOL_GPL as they are not actually used by any other driver and exporting them is useless. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* armsr: armv8: Enable KASLR in kernel 6.1Javier Tia2023-10-05
| | | | | | | In userspace, ASLR is enabled, but it's missing to enable KASLR on the kernel side to improve security as part of SystemReady recommendations. Signed-off-by: Javier Tia <javier.tia@linaro.org>
* mediatek: fix wrong variable name in patch for Linux 6.1Daniel Golle2023-10-05
| | | | | | | | | | The name of the variable holding the pointer to the private struct has changed between Linux 5.15 and Linux 6.1 and adding the identical patch fixing PCIe #PERST de-assert broke the build on Linux 6.1. Also change the name in the patch to fix the build. Fixes: 6a2e17d5c1 ("mediatek: fix PCIe #PERST being de-asserted too early") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq806x: fix wrong QCA8K LED definition for NEC Aterm WG2600HP3Christian Marangi2023-10-05
| | | | | | | | | | | Fix copy-paste error in migrating NEC Aterm WG2600HP3 to new LED implementation for the QCA8K switch. Correct define the missing additional LED pin used for each port and fix wrong color for LED 2 for each port. Also add the required function-enumerator as all 3 LED have the same color and function. Fixes: c707cff6c94b ("ipq806x: add LEDs definition for non-standard qca8k LEDs") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* linux-atm: use target specific kernel headersMartin Schiller2023-10-05
| | | | | | | | | | There are a few targets that mess with the atm kernel headers. To avoid incompatibility between kernel and user space during compilation, the correct headers should be used. Consequently, the package must also be marked as nonshared. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ipq806x: add support for Extreme Networks AP3935Glen Lee2023-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extreme Networks AP3935i/e - https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/ SoC: IPQ8068 QYY AT46279K45060I RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW FLASH: NOR - S25FL256S1 - 32MB NAND - Macronix MX30UF4G28AB - 512MB LAN: Atheros AR8035-A J5150WL 1515 CN - RGMII LAN2: Atheros AR8033-AL1A SKCSR.AJ1 1444 China - SGMII WLAN2: QCA9990 OVV FNPV209 K451406 WLAN5: QCA9990 OVV FNPV209 K451406 SERIAL: RS232 Port (115200 8n1) Cisco console cable and 4pin Serial Header | 3.3 | GND | RX | TX MAC address for LAN1/LAN2/WLAN 2G/WLAN 5G in uboot env * Installation via either RJ45 console or on-board 4 PIN header Install Method -------------- 1) Setup TFTP server, and place openwrt-ipq806x-generic-extreme_ap3935-initramfs-uImage image in /srv/tftp or similar 2) Connect to console on router and connect ethernet port "LAN1" to your LAN 3) Interupt the boot with any character 4) Login with admin/new2day for default password (use reset/FactoryDefault if password needs to be reset) 5) Set serverip to TFTP IP: set serverip 192.168.1.2 6) Set ipaddr to another IP: set ipaddr 192.168.1.101 7) Make uboot ping something to activate eth0 on boot: set bootcmd 'ping 192.168.1.1; run boot_flash' saveenv 8) TFTP image to RAM: tftpboot 0x42000000 openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage 9) Boot image: bootm 0x42000000 In OpenWRT, "LAN1" is LAN, "LAN2" is WAN 10) SFTP openwrt-ipq806x-generic-extreme_ap3935-squashfs-nand-sysupgrade.bin image to /tmp 11) sysupgrade /tmp/openwrt-*-nand-sysupgrade.bin Signed-off-by: Glen Lee <g2lee@yahoo.com>
* kernel: bump 5.15 to 5.15.133John Audia2023-10-04
| | | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.133 Removed upstreamed: bcm47xx/patches-5.15/101-v5.18-mtd-rawnand-brcmnand-Allow-SoC-to-provide-I-O-operations.patch[1] Cherry picked build fix.[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.133&id=56cf9f446b331414a15ef0e8dedf23583ec2c427 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/tree/queue-5.15/fix-up-backport-of-136191703038-interconnect-teach-l.patch Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* Delete arm-magic scriptLinus Walleij2023-10-04
| | | | | | | | | This script was used to modify the wrong machine type passed from the boot loader to the kernel. The device tree kernels does not use the machine type so this script is no longer needed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Drop kernel v5.15 and default to v6.1Linus Walleij2023-10-04
| | | | | | | | | | | | | | There is no point in keeping the v5.15 kernel around for Gemini, we are maintaining the platform with a strong upstream focus and newer is always better. Now that OpenWrt can support pure v6.1 kernels, switch up to v6.1 and drop v5.15 so we don't need to migrate configs and patches for no reason. The USB FOTG2 module handling can be simplified as a result. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* rtl83xx: fix STP by trapping BPDUsRudolf Vesely2023-10-04
| | | | | | | | | | | Fix Spanning Tree Protocol (STP) by changing COPY2CPU which currently makes switch to ignore Bridge Protocol Data Units (BPDUs). Tested on Zyxel GS1900-8, 24 and 48. Signed-off-by: Rudolf Vesely <i@rudolfvesely.com> [ improve commit description and add new line in different sections ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: push-containers: refresh containers also on modify cmake optionsChristian Marangi2023-10-04
| | | | | | Refresh containers also on modify of cmake options in the include file. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: push-containers: fix concurrency groupChristian Marangi2023-10-04
| | | | | | | Fix concurrency group for push-containers workflow to handle running on different branches. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* build: suppress cmake warnings about unused varsTjalling Hattink2023-10-04
| | | | | | | | | | | | | | When cmake is invoked to build a package it usually reports a warning about unused variables passed to it. This is caused by openwrt passing all supported variables to cmake, even if they are not all required by the package being compiled. To reduce clutter when compiling such packages these warnings are now suppressed. Approved-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Tjalling Hattink <t.hattink@fugro.com>
* realtek: 5.15: rtl93xx: support 2500baseT and 5000baseT on USXGMII linksTobias Schramm2023-10-03
| | | | | | | | | | | | | | | | | The USXGMII implementation of Realtek switches can not only support 10GbE but also 2.5Gb and 5Gb on top of the usual data rates. Mark those as supported to allow them to be negotiated. This change has been tested on a ZyXEL XGS1250-12 with the following link partners: - NWA50AX Pro (2.5Gb) - RTL8152 USB NIC (2.5Gb) - AQC111 USB NIC (2.5Gb & 5Gb) Gbit and 10GbE has also been tested to still work fine with a variety of devices. Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
* rtl93xx: fix condition intended to only select internal serdes portsPeter Körner2023-10-03
| | | | | | | | | | | | | This condition was introduced in commit 51c8f7661244 ("realtek: Improve MAC config handling for all SoCs") to correctly report the speed of the internal serdes ports as 10G, but instead makes all ports read 10G because the or-operator should have been an and-operator. Fixes: #9953 Fixes: 51c8f7661244 ("realtek: Improve MAC config handling for all SoCs") Signed-off-by: Peter Körner <git@mazdermind.de> [ wrap comment to 72 column and improve commit ref ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: fix PCIe #PERST being de-asserted too earlyDaniel Golle2023-10-03
| | | | | | | | | The driver for MediaTek gen3 PCIe hosts de-asserts all reset signals at the same time using a single register write operation. Delay the de-assertion of the #PERST signal by 100ms as some PCIe devices fail to come up otherwise. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uqmi: added timeout to fix hanging qmi.shUwe Niethammer2023-10-03
| | | | | | | | | | Modems which are using qmi do not reply on the 1st sync but they do on subsequent. So qmi.sh is hanging on the first call. Since 2020 uqmi supports a timeout parameter. Unfortunately qmi.sh didn't make use of this parameter. So qmi.sh is now invoking an early dummy access to unlock the modem Signed-off-by: Uwe Niethammer <uwe@dr-niethammer.de>
* yafut: add missing PKG_MIRROR_HASHChristian Marangi2023-10-02
| | | | | | | Add missing PKG_MIRROR_HASH. This is always needed as is used to generate and use a tar instead of git clone and validate the hash of it. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: use upstreamed SDI disable supportRobert Marko2023-10-02
| | | | | | | | | | | | | | | Google WiFi board has what seems as debug version of TZ/QSEE and it is always enabling SDI (Secure Debug Image) and in order to do a regular reboot it must be disabled, as otherwise you are stuck in a debug state where you are supposed to extract debug logs via QCA tooling which is not helpfull at all for regular users. So, instead of using our downstream version to disable SDI lets use the version that was merged upstream and relies on a boolean property in the SCM node instead of checking the compatible. Signed-off-by: Robert Marko <robimarko@gmail.com> Tested-by: Brian Norris <computersforpeace@gmail.com>
* ipq-wifi: improve and update instructions on how to add board filesChristian Marangi2023-10-02
| | | | | | | Improve and update instructions on how to add board files and both describe the needed step to upstream a board file or to use it locally. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* rtl8812au-ct: Fix PKG_MIRROR_HASHHauke Mehrtens2023-10-02
| | | | | | | | | The PKG_MIRROR_HASH is wrong, fix it. Found and fixed using this command: make package download check FIXUP=1 Fixes: c123e4f0533e ("rtl8812au-ct: bump to fix kernel 6.1 compile") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: fix eeprom loading (Mercusys MR90X v1)Mikhail Zhilkin2023-10-02
| | | | | | | | | | | | | Commit mt76: drop default eeprom file for mt7986-firmware (e3aa645b267ca4f08773b5366583e9b0020fc3e9) breaks eeprom loading for Mercusys MR90X v1. As a result WiFi is not working at all. This commit adds Mercusus MR90x to the caldata script (it works after the commit mentioned above). And we can safely drop "81_fix_eeprom" script as it's no longer required. Fixes: e3aa645b267ca4f08773b5366583e9b0020fc3e9 Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* uci: fix Makefile formattingOskari Rauta2023-10-01
| | | | | | Fix wrong declaration for PKG_SROUCE_URL and PKG_VERSION variables and add missing colon Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* ipq806x: disable unused SWCONFIG config flagsChristian Marangi2023-09-30
| | | | | | | Disable unused SWCONFIG config flags now that we switched to DSA and are not needed anymore. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add patch fixing regression from stmmac TX timerChristian Marangi2023-09-30
| | | | | | | | | | | Add patch fixing regression from stmmac TX timer. Refer to the single patch for extensive details on the problem. This should restore original performance before 4.19 kernel. Fixes: #11676 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: refresh qca8k patchesChristian Marangi2023-09-30
| | | | | | Refresh qca8k patches to sync with the generic backports changes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: add LEDs definition for non-standard qca8k LEDsChristian Marangi2023-09-30
| | | | | | | | | | Add LEDs definition for devices that use a non-standard qca8k LEDs configuration. This is to restore original setup of the LED and be on par with swconfig old configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: enable and setup multi-CPU port for qca8k switchChristian Marangi2023-09-30
| | | | | | | | | | | | | | | | | Enable and setup multi-cpu for qca8k switch for ipq806x based devices. Rework each DTS to enable the secondary CPU port on QCA8K switch and apply the required values originally set by the OEM in the old swconfig node. In original firmware the first CPU port was always assigned to the WAN port and the secondary CPU port was assigned to the rest of the LAN port. Follow this original implementation using an init.d script. To setup the CPU port ip tools is required. Add additional default package ip-tiny to correctly setup the CPU port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport patch for multi CPU port support on QCA8KChristian Marangi2023-09-30
| | | | | | | | Backport pending patch for multi CPU port support on QCA8K. 6.1 already supports all the requiredt code to change a DSA master port so only this patch fixing the driver is required. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 6.1: backport various qca8k fixes patchChristian Marangi2023-09-30
| | | | | | | Backport various QCA8K fixes patch merged upstream. Refresh any changed patches due to backports. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: move ASRock G10 fix mac preinit script to generic board.d scriptChristian Marangi2023-09-30
| | | | | | | | Drop and move ASRock G10 preinit script to fix mac address to generic board.d script and rework for consistency with other devices following a similar implementation. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: convert each device to DSA implementationChristian Marangi2023-09-30
| | | | | | | | | | | Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: add patch for GPON-ONU-34-20BI quirkChristian Marangi2023-09-29
| | | | | | Backport patch merged upstream adding quirk for SFP GPON-ONU-34-20BI. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: increase PKG_RELEASE to fix buildsNick Hainke2023-09-29
| | | | | | | Recent hostapd changes just edited the ucode files. It is required to bump the PKG_RELEASE to include the newest changes in the latest builds. Signed-off-by: Nick Hainke <vincent@systemli.org>
* filogic: add support for GL.iNet GL-MT6000Jianhui Zhao2023-09-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: * SoC: MediaTek MT7986A 4x A53 * Flash: 8GB EMMC * RAM: 1GB DDR4 * Ethernet: * 2x2.5G RJ45 port (RTL8221B) * 4x1G RJ45 ports (MT7531AE) * WLAN: * 2.4GHz: MT7976GN 4T4R * 5GHz: MT7976AN 4T4R * Button: Reset * LED: 1 x dual color LED * USB: 1 x USB 3.0 * Power: DC 12V 4A * UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC) * JTAG: 9 PIN If you want to use u-boot from OpenWrt, you can upgrade it safely. * bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin * fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip `openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* mt76: drop default eeprom file for mt7986-firmwareChukun Pan2023-09-29
| | | | | | | | | The mt76 driver usually reads the eeprom on the mtd partition at dts. For emmc device we need to use caldata_extract script to read the eeprom. However, the default eeprom file breaks the caldata script execution, so remove it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* generic: net: phy: realtek: add interrupt support for RTL8221BJianhui Zhao2023-09-29
| | | | | | This commit introduces interrupt support for RTL8221B. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* uboot-mediatek: sync spi-nand driver with SDKChukun Pan2023-09-29
| | | | | | | | | | | When adding new router support, I found that uboot could not recognize flash: "unknown raw ID xxx". Sync SPI-NAND driver for mediatek to fixes this: * Add support for Winbond W25N01KV 1Gbit chip. * Add support for Etron SPI-NAND chip. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sifiveu: refresh 6.1 configZoltan HERPAI2023-09-28
| | | | | | Add new config symbols as required. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: remove upstreamed patches, refresh remaining onesZoltan HERPAI2023-09-28
| | | | | | | | | | | | Upstreamed: 0002-riscv-sifive-unmatched-update-regulators-values.patch 0003-riscv-sifive-unmatched-define-PWM-LEDs.patch 0006-riscv-sbi-srst-support.patch Compile-tested: HiFive Unleashed / Unmatched Runtime-tested: HiFive Unleashed / Unmatched Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: add testing kernel 6.1Zoltan HERPAI2023-09-28
| | | | | | | Compile-tested: HiFive Unleashed / Unmatched Runtime-tested: HiFive Unleashed / Unmatched Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sifiveu: copy patches from 5.15 to 6.1Zoltan HERPAI2023-09-28
| | | | | | To start the upgrade, we copy the patches from 5.15 to 6.1. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* hostapd: fix wpa_supplicant mac address allocation on ap+staFelix Fietkau2023-09-28
| | | | | | | | | | | If the full interface is restarted while bringing up an AP, it can trigger a wpa_supplicant interface start before wpa_supplicant is notified of the allocated mac addresses. Fix this by moving the iface_update_supplicant_macaddr call to just after the point where mac addresses are allocated. Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mpc85xx: add Enterasys WS-AP3715i reset buttonDavid Bauer2023-09-27
| | | | | | | The reset button was missing from the Enterasys WS-AP3715i DTS. Add the node required for making the reset button work. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix mac address of interfaces created via wdev.ucFelix Fietkau2023-09-27
| | | | | | Use the wdev config with the generated MAC address Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Themed by Ted Yin.