aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* kernel: copy only *.ko for debug infoChuanhong Guo2024-01-07
| | | | | | | | | | | Previous commits installed non-elf files into /lib/modules/$VER/. COLLECT_KERNEL_DEBUG tries to strip all files and these two files break the build. Fix it by copying only kernel modules for debug info collection. Fixes: e1d8e57614 ("kernel: include modinfo for built-in modules") Fixes: 29f6da4340 ("kernel: include built-in module list") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: add alternative name to Etisalat (Sercomm) S3Mikhail Zhilkin2024-01-07
| | | | | | This commit adds alternative name to Etisalat (Sercomm) S3 router. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: sercomm s1500: enable wlan LEDs activity blinkingMikhail Zhilkin2024-01-07
| | | | | | | | | This commit enables wireless LEDs activity blinking for Sercomm S1500 devices (Beeline Smartbox PRO, WiFire s1500.nbn). Run-tested: WiFire s1500.nbn Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: update leds & buttons dts descriptionMikhail Zhilkin2024-01-07
| | | | | | | | | | | | | This commit: 1. Removes deprecated "label" property from the dts leds subnnodes; 2. Updates buttons and leds dts description according to kernel docs examples. Scope: devices well known to me. Run-tested: TP-Link ec330-g5u, WiFire S1500.nbn Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ath79: support MikroTik RouterBOARD 911G-5HPacDLech Perczak2024-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RouterBOARD 911G-5HPacD is a stripped-down version of RB921GS-5HPacD, removing the SFP cage. This ports the board from ar71xx, and is based on support for RB921GS-5HPacD. Disable mdio1 and eth1 nodes in routerboard-92x.dtsi, then re-enable them in devices using that, so the newly-added device has the port disabled properly. See https://mikrotik.com/product/RB911G-5HPacD for more info. Specifications: - SoC: Qualcomm Atheros QCA9558 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9892 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE in Working: - NAND storage detection - Ethernet - Wireless - 1x user LED (blinks during boot, sysupgrade) - Reset button - Sysupgrade Installation: - Boot initramfs image via TFTP and then flash sysupgrade image Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: mikrotik: add rssileds support for Routerboard 911G and RB912UAGLech Perczak2024-01-07
| | | | | | | LEDs 1 through 5 are used for RSSI monitoring on factory firmware. Reflect that by creating appropriate rssileds configuration. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: support for MikroTik RouterBOARD 911G-(2,5)HPnDLech Perczak2024-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a stripped-down version of RB912UAG-(2,5)HPnD, without USB, miniPCIe and SIM sockets. This board has been supported in the ar71xx. Add support based on RB912UAG board, by splitting out the common part to .dtsi, and creating separate device tree for the stripped-down version. Links: * https://mikrotik.com/product/RB911G-2HPnD * https://mikrotik.com/product/RB911G-5HPnD * https://openwrt.org/toh/hwdata/mikrotik/mikrotik_rb911g-5hpnd Hardware: * SoC: Atheros AR9342, * RAM: DDR 64MB, * SPI NOR: 64KB, * NAND: 128MB, * Ethernet: x1 10/100/1000 port with passive POE in, * Wi-Fi: 802.11 a/b/g/n (depending on band variant) * LEDs: 5 general purpose LEDs (led1..led5), power LED, user LED, Ethernet phy LED, * Button, * Beeper. Flashing: * Use the RouterBOARD Reset button to enable TFTP netboot, boot kernel and initramfs and then perform sysupgrade. * From ar71xx OpenWrt firmware run: $ sysupgrade -F /tmp/<sysupgrade.bin> For more info see: https://openwrt.org/toh/mikrotik/common. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: mikrotik: add RB912UAG-5HPnD as alternative nameLech Perczak2024-01-07
| | | | | | | | | Image for RB912UAG-2HPnD supports the 5GHz variant without modifications. Add it as alternative name, so it can be found easier. While at that, adjust board display name in device tree, to reflect that. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ramips: add missing syscon compatible strings for MT7688 and RT3052Shiji Yang2024-01-06
| | | | | | | | | | | | MT7688 devices use the "mt7628an.dtsi" as the template. And RT3052 devices use the "rt3050.dtsi" as template. Therefore, we need to add the corresponding system controller compatible strings to make them work properly. Fixes: 1f818b09f8ae ("ramips: add proper system clock and reset driver support for legacy SoCs") Fixes: #14305 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* build: fix toplevel check targetTony Ambardar2024-01-06
| | | | | | | | | Partially revert changes to verbose logging that break the 'check' target dependencies and trigger many runtime warnings like: /home/kodidev/openwrt-project/include/toplevel.mk:213: *** mixed implicit and normal rules: deprecated syntax Fixes: e4a43cda0 ("build: allow var.% targets to bypass the prepare steps") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* qualcommax: Fix Buffalo WXR-5950AX12 wifi MACSamir Ibradžić2024-01-06
| | | | | | | | | | | | | | | | | | | | | Currently, WiFi interfaces on WXR-5950AX12 / WXR-6000AX12 devices come up with some MAC addresses inconsistent with vendor and Ethernet addresses. This adds a hotplug override in order to make it consistent with what is in u-boot env as well as OAM firmware where 1st radio MAC is set at Ethernet MAC + 8, and 2nd radio mac at Ethernet MAC + 16. fw_printenv | grep addr ethaddr=68:e1:dc:xx:xx:d8 ipaddr=192.168.11.1 wlan0addr=68:e1:dc:xx:xx:e0 wlan1addr=68:e1:dc:xx:xx:e8 wlan2addr=00:00:00:00:00:00 For OEM bootlog and MAC assagnment check https://openwrt.org/toh/buffalo/wxr-5950ax12#openwrt_uimage_tftp_bootlog Tested-by: Samir Ibradžić <sibradzic@gmail.com> # Buffalo WXR-6000AX12P Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
* mediatek: filogic: add support for Xiaomi AX3000TDim Fish2024-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | **SoC**: MediaTek MT7981B 2x A53 **Flash**: ESMT F50L1G41LB 128MB **RAM**: NT52B128M16JR-FL 256MB **Ethernet**: 4x 10/100/1000 Mbps **Switch**: MediaTek MT7531AE **WiFi**: MediaTek MT7976C **Buttons**: Reset, Mesh **Power**: DC 12V 1A 1. Get ssh access. Supported stock firmware **1.0.47** ``` curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20set%20ssh_en%3D1%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Anvram%20commit%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0Ased%20-i%20's%2Fchannel%3D.*%2Fchannel%3D%22debug%22%2Fg'%20%2Fetc%2Finit.d%2Fdropbear%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=*******/api/misystem/arn_switch" -d "open=1&model=1&level=%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A" curl -X POST "http://192.168.31.1/cgi-bin/luci/;stok=********/api/misystem/arn_switch" -d "open=1&model=1&level=%0Apasswd%20-d%20root%0A ``` 2. Backup stock partitions ``` nanddump -f /tmp/BL2.bin /dev/mtd1 nanddump -f /tmp/Nvram.bin /dev/mtd2 nanddump -f /tmp/Bdata.bin /dev/mtd3 nanddump -f /tmp/Factory.bin /dev/mtd4 nanddump -f /tmp/FIP.bin /dev/mtd5 nanddump -f /tmp/ubi.bin /dev/mtd8 nanddump -f /tmp/KF.bin /dev/mtd12 ``` Then transfer them to your computer in a safe place. 3. Get firmware information `cat /proc/cmdline` 4. Copy openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi to **/tmp** and flash If **firmware=0** ``` ubiformat /dev/mtd9 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` If **firmware=1** ``` ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory.ubi nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit reboot ``` Then reboot your router, it should boot to the OpenWrt initramfs system now. 5. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin` 1. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` `reboot` 2. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 3. Format ubi and create new ubootenv volume ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB ``` 4. *(Optional **-10Mb** free space) Add recovery boot feature.* ``` ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb ``` 5. Flash Openwrt U-Boot ``` mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin BL2 mtd write /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip FIP ``` 6. Flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb `sysupgrade -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb` 1. Force flash openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb `sysupgrade -F -n /tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb` 2. Format ubi and Nvram ``` ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8 mtd erase Nvram ``` 3. Install kmod-mtd-rw `opkg update && opkg install kmod-mtd-rw` `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1` 4. Flash stock images from backup ``` mtd write /tmp/BL2.bin BL2 mtd write /tmp/FIP.bin FIP mtd write /tmp/ubi.bin ubi ``` Then reboot your router, waiting it finished rollback in minutes. `ubiformat /dev/mtd7 -y -f /tmp/ubi.bin` Then reboot your router, waiting it finished rollback in minutes. Signed-off-by: Dim Fish <dimfish@gmail.com>
* kernel: include modinfo for built-in modulesTony Ambardar2024-01-06
| | | | | | | | | | | | | | | | | | Add modules.builtin.modinfo to the kernel package, to support presence testing using module aliases and printing module details with 'modinfo'. With related kmodloader changes this adds ~2 KB to compressed image sizes. root@OpenWrt:/# modinfo unix name: unix filename: (builtin) alias: net-pf-1 license: GPL root@OpenWrt:/# modprobe net-pf-1 && echo SUCCESS || echo FAIL SUCCESS Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: include built-in module listTony Ambardar2024-01-06
| | | | | | | | | | | | | | | | | | | | | | Add modules.builtin to the kernel package for improved handling of loadable and builtin modules. As with other distros, this allows 'modprobe <module>' to consistently return success for both loaded/built-in modules, a useful feature for presence-testing. Given OpenWrt's few built-in modules, this change and related kmodloader support add ~1 KB to the compressed image size. Using sch_fq_codel (builtin) and sch_cake (loadable) for example: root@OpenWrt:/# modprobe sch_fq_codel && echo SUCCESS || echo FAIL SUCCESS root@OpenWrt:/# modprobe sch_cake && echo SUCCESS || echo FAIL SUCCESS root@OpenWrt:/# rmmod sch_fq_codel module is builtin Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq807x: add support for Linksys MX4200 V1 and V2Mohammad Sayful Islam2024-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linksys MX4200 is a 802.11ax Tri-band router/AP. Specifications: * CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz * RAM: 512MB of DDR3 * Storage: 512Mb NAND * Ethernet: 4x1G RJ45 ports (QCA8075) * WLAN: * 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate * 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * LED-s: * RGB system led * Buttons: 1x Soft reset 1x WPS * Power: 12V DC Jack Installation instructions: Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup. Login with your admin password. The default password can be found on a sticker under the device. To enter into the support mode, click on the “CA” link and the bottom of the page. Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button. Click start. Ignore all the prompts and warnings by click “yes” in all the popups. The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device. Then you would need to write openwrt to the other partition for it to work - First Check booted partition fw_printenv -n boot_part - Then install Openwrt to the other partition if booted in slot 1: mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel - If in slot 2: mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel Replace (X) with your model version either 1 or 2 Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ramips: reset mt7620 ethernet phy via reset controllerShiji Yang2024-01-06
| | | | | | | | | | | Use reset controller to reset mt7620 ethernet phy instead of directly writing system control registers. The reset line of "ephy" is 24, so the DTS resets properties have been updated to get the correct reset signal. Tested on HiWiFi HC5861. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: reset mt7620 frame engine via reset controllerShiji Yang2024-01-06
| | | | | | | | | Use reset controller to reset mt7620 frame engine instead of directly writing system control registers. Tested on HiWiFi HC5861. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: bump 6.1 to 6.1.71John Audia2024-01-06
| | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.71 Manually rebased: gemini/patches-6.1/0002-usb-fotg210-Collect-pieces-of-dual-mode-controller.patch All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.146John Audia2024-01-06
| | | | | | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.146 Removed upstreamed: generic/hack-5.15/940-ksmbd-have-a-dependency-on-cifs-arc4.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.146&id=ac385518598f50dd1b9b41bd05f50ce9795481d5 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* mediatek: MERCUSYS MR90X v1: remove deprecated led "label" propertiesMikhail Zhilkin2024-01-06
| | | | | | | | | | | This commit: 1. Removes deprecated "label" property from the dts leds subnnodes; 2. Updates "01_leds" script. Link: https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml Link: https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/leds-gpio.yaml Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* realtek: correct typo in port numberingMichael 'ASAP' Weinrich2024-01-05
| | | | | | Port 10 was incorrectly labelled as nonexistent port 0. Signed-off-by: Michael 'ASAP' Weinrich <michael@a5ap.net>
* realtek: fix network connectivity on GS750EMichael 'ASAP' Weinrich2024-01-05
| | | | | | | | | | | Currently OpenWRT does not know how to properly reset the network switch. This would result in a switch that seemed to come up properly but was unable to handle any traffic. Presumably something earlier in the boot chain is configuring a part of the switch that gets wiped out when its reset. For now comment out the reset GPIO entry in the device tree until the driver better supports bringing up the switch after a reset. Signed-off-by: Michael 'ASAP' Weinrich <michael@a5ap.net>
* ag71xx: fix wrong register definition issueRosen Penev2024-01-05
| | | | | | Documentation fix from QCA SDK. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mac80211: add missing newline for "min_tx_power"Rany Hany2024-01-05
| | | | | | | This prevents min_tx_power from functioning properly in some circumstances. Add the missing newline. Signed-off-by: Rany Hany <rany_hany@riseup.net>
* verbose.mk: fallback to standard file descriptorsMichael Pratt2024-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to pass a status message at runtime, which is usually listing subtargets of a Makefile target or an error message, from a child invocation of Make (submake) through the parent process to the terminal, the file descriptors 8 and 9 are opened to be used by the functions MESSAGE and ERROR_MESSAGE. However, there are situations where those functions can be called while not in a submake or a subshell or a child process which results in a shell error: /bin/bash: 8: Bad file descriptor Commit aee3594ffcb72ae3e18c3719012d52519ee2d160 ("verbose.mk: print ERROR messages in non-verbose") has exposed this issue to more cases, but it is not the root cause. To solve this, use the exit code of the first printf attempt to the alternative file descriptors in order to tell whether the standard file descriptors need to be used instead. In order to get rid of the "Bad file descriptor" error, stderr is redirected to null after grouping the two printf alternatives into one command to combine outputs. For ERROR_MESSAGE, the real message is redirected to stderr after redirecting the error from the attempted printing to null. For MESSAGE, without redirection, the Make function "shell" will absorb the actual message from stdout and input the value into the Makefile, therefore the dummy variable "_NULL", previously used merely for causing a call to the MESSAGE function to trigger without writing target rules, now has and a real value when defined, so rename it to "_MESSAGE" as a placeholder for the real message when the output should be stdout. When "_MESSAGE" has a value, use Make function "info" to finally bring it from the Makefile to the terminal. This also fixes what is likely a typo, in that while file descriptor 9 is meant to redirect to stderr for use in error messages like in the function ERROR_MESSAGE, that function has printf redirecting to file descriptor 8 instead. Fixes: a4c8d4e37 ("build: make the color of the 'configuration out of sync' warning red") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* build: ensure silent Make behavior for json scriptsMichael Pratt2024-01-05
| | | | | | | | | | | | | | | | | | | | | | | Run the invocation of Make with verbosity in order to prevent the printing of Makefile level and subtarget status. e.g. make[3] -C target/linux val.DEFAULT_PACKAGES val.ARCH_PACKAGES Remove piping of stderr, which is only useful when using the "communicate" method over the "run" method, and this script would not be written to handle a captured error anyway. For error testing, stdout and stderr can be set to a file object with the open() function like this: out = open('json_out', 'w') err = open('json_err', 'w') ... ... stdout=out, stderr=err, Signed-off-by: Michael Pratt <mcpratt@pm.me>
* build: allow var.% targets to bypass the prepare stepsMichael Pratt2024-01-05
| | | | | | | | | | | | These targets are used to input variable values from the Make context into other things like python scripts, so log messages should be silenced and build prerequisites should be skipped. The same thing is done for the other variable print target "val.%". While at it, combine identical target rules into one definition. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: move kernel and ubi into subnodesRosen Penev2024-01-05
| | | | | | | | Avoids dtc warnings regarding two sections having the same numbers. X: duplicate unit-address (also used in node Y) Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: gpio to gpiosRosen Penev2024-01-05
| | | | | | Fixes deprecated_gpio_property dtc warning Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: fix pci_device_reg errorsRosen Penev2024-01-05
| | | | | | Found by dtc. Wrong numbers and wrong ordering. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: fix unit_address_format warningRosen Penev2024-01-05
| | | | | | Raised by dtc. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: fix avoid_unnecessary_addr_size warningsRosen Penev2024-01-05
| | | | | | Raised to dtc. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: rename pcie-controller to pcieRosen Penev2024-01-05
| | | | | | | pcie-controller was renamed to pcie since at least kernel 4.14. Match it here to get rid of dtc warnings. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* image.mk: reorder DTC_WARN_FLAGS based on upstreamRosen Penev2024-01-05
| | | | | | pci warnings got reenabled as they were fixed upstream. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: fix dtc warningsRosen Penev2024-01-05
| | | | | | Mostly leading 0 removals and wrong addresses. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* treewide: use ethtool_puts instead of memcpyRosen Penev2024-01-05
| | | | | | The former is a safer and more readable version. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: backport ethtool_putsRosen Penev2024-01-05
| | | | | | Will be used for conversions in the following commit. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: fix bridge proxyarp issue with some broken DHCP clientsFelix Fietkau2024-01-05
| | | | | | | | | | | There are broken devices in the wild that handle duplicate IP address detection by sending out ARP requests for the IP that they received from a DHCP server and refuse the address if they get a reply. When proxyarp is enabled, they would go into a loop of requesting an address and then NAKing it again. Fixes: https://github.com/openwrt/openwrt/issues/14309 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* devel/gdb: Update to 14.1Hannu Nyman2024-01-04
| | | | | | | | | | Update the gdb package to 14.1 * mpfr is now required, remove the 'without' and add dependency * remove mpc 'without' that is parsed wrongly, causing "-Lno/lib" * refresh patches Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mpfr: import from packages feedHannu Nyman2024-01-04
| | | | | | | Import mpfr from the packages feed to the main OpenWrt repo, as gdb 14 requires mpfr. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel/ksmbd: fix build for 5.15.145John Audia2024-01-04
| | | | | | | | | | | | | Include a patch[1] under review to fix the modpost error due to upstream changes: ... ERROR: modpost: "cifs_arc4_crypt" [fs/ksmbd/ksmbd.ko] undefined! ERROR: modpost: "cifs_arc4_setkey" [fs/ksmbd/ksmbd.ko] undefined! scripts/Makefile.modpost:133: recipe for target 'modules-only.symvers' failed 1. https://lore.kernel.org/all/20231227102605.4766-2-linkinjeon@kernel.org/ Signed-off-by: John Audia <therealgraysky@proton.me>
* linux/modules: remove deprecated moduleJohn Audia2024-01-04
| | | | | | | | | Remove upstream deprecated module from our build, see[1] 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit?h=v5.15.145&id=6cd90c01b032f335d18966b2d979eef43eb2cfc1 Suggested-by: Shiji Yang <yangshiji66@qq.com> Signed-off-by: John Audia <therealgraysky@proton.me>
* rockchip: configure eth pad driver strength for orangepi r1 plus ltsTianling Shen2024-01-04
| | | | | | | | | | | The default strength is not enough to provide stable connection under 3.3v LDO voltage. Fixes: 32d5921b8b55 ("rockchip: add Orange Pi R1 Plus LTS support") Fixes: #13117 Fixes: #13759 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* mac80211: fix a race condition related to enabling fast-xmitFelix Fietkau2024-01-04
| | | | | | | | | | fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnl: update to 3.9.0Nick Hainke2024-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: bdf83151 libnl-3.9.0 release aa7353fd include/linux-private: import 'seg6 local' headers from kernel tree 9466f680 lib: remove unused assignment in nl_addr_parse() acd05d6e route/tc: avoid integer overflow in rtnl_tc_calc_cell_log() daa8efcb xfrm: return -NLE_MISSING_ATTR from xfrmnl_sa_get_auth_params() d8a1ff30 xfrm: fix leaking usertemplate in xfrmnl_sp_parse() 4fcb0757 socket: workaround coverity warning about time_t handling f743c62f github: update Fedora image and version for clang-format f33e8cd6 clang-format: rework container script aea3f9f2 lib: fix signed overflow warning in nl_object_diff() 57e01706 socket: explicitly cast time() to uint32_t 46e8739e src: fix leak in "nl-cls-add" a06c8f76 route/cls: add get/take wrappers for rtnl_act_append() 7912b4f9 route/cls: fix leak in error handling of rtnl_flower_append_action() efd65feb route: fix just introduced use-after-free in rtnl_act_parse() 105a6be1 route: use cleanup macro in rtnl_act_parse() 78246da7 nl-aux-route: add cleanup macro for rtnl_act_put_all() 72762b20 base: add _NL_AUTO_DEFINE_FCN_INDIRECT0() macro a70f789a route: fix memleak in rtnl_act_parse() 65ab16f2 base: don't use static array indices for buffer argument of _nl_inet_ntop() 444e2c04 route/can: implement can_device_stats a4718e67 github: build with "-fexceptions" CFLAGS 2f485cc7 xfrm: refactor error handling in XFRM parsing 01bd8fb0 include: add "nl-aux-xfrm" helpers 49c20efa xfrm: fix crashes in case of ENOMEM 9e7b5c86 xfrm: refactor nl_addr_build() calls in XFRM code dbfd87b1 xfrm: use cleanup attribute for nl_addr in XFRM parsing db424835 xfrm: fix error code for NLE_ENOMEM in xfrmnl_ae_parse() 9c97deff xfrm: fix parsing address in xfrmnl_ae_parse() 8b6dc834 nl-aux-core: add _nl_addr_build() helper 057aac13 nl-base-utils: add _nl_addr_family_to_size() helper 664f8f1b xfrm: clear XFRM_SP_ATTR_TMPL when removing the last template from a policy c4c22d26 xfrm/sp: fix reference counters of sa selector/tmpl addresses 5979fcb0 route/link: add bonding interface options set rtnl apis a735989c build: fix declaring special targets as ".PHONY" 052a97cb Makefile.am: avoid use of non-portable echo arguments 9aab12df python: Use correct decorator syntax in HTBQdisc Signed-off-by: Nick Hainke <vincent@systemli.org>
* libxml2: update to 2.12.3Nick Hainke2024-01-04
| | | | | | | | Release Notes: - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.2 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.3 Signed-off-by: Nick Hainke <vincent@systemli.org>
* netifd: update to Git HEAD (2024-01-04)Felix Fietkau2024-01-04
| | | | | | | 4219e99eeec7 system-linux: fix race condition in netlink socket error handing f01345ec13b9 device: restore cleared flags on device down Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq807x: cax1800: fix blsp1_spi1 status with okayPetr Štetiar2024-01-03
| | | | | | | | `ok` status is obsolete and thus `okay` should be used instead: spi@78b9000: status:0: 'ok' is not one of ['okay', 'disabled', 'reserved'] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: unielec-u7621-01: Increase SPI frequency to 50MHzDavid Bentham2024-01-03
| | | | | | | | | | | | Flash: 16MB SPI NOR flash (Macronix MX25L12805D) Based on the manufactured datasheet this chip is capable of 50MHz. We dont enable fast-read as mt7621 are only capable of 44mhz in a read state. Tested on this unit without any issues. Signed-off-by: David Bentham <db260179@gmail.com>
* ramips: lzma-loader: use default uart for rt305xMichael Pratt2024-01-02
| | | | | | | | | | | | | The rt305x series SOC have two UART devices, and the one at bus address 0x500 is disabled by default. Some boards do not even have a pinout for the first one, so use the same one that the kernel uses at 0xc00 instead. This allows the lzma-loader printing to be visible alongside the kernel log in the same console. Tested-by: Lech Perczak <lech.perczak@gmail.com> # zte,mf283plus Signed-off-by: Michael Pratt <mcpratt@pm.me>
Powered by cgit, Themed by Ted Yin.