aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* tools: assign PKG_CPE_IDAlexander Couzens2023-09-19
| | | | | | | | | The PKG_CPE_ID links to NIST CPE version 2.2. Assign PKG_CPE_ID to all remaining tools which have a CPE ID. Not every tool has CPE id. Related: https://github.com/openwrt/packages/issues/8534 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* packages: assign PKG_CPE_ID for all missing packagesAlexander Couzens2023-09-19
| | | | | | | | | The PKG_CPE_ID links to NIST CPE version 2.2. Assign PKG_CPE_ID to all remaining package which have a CPE ID. Not every package has CPE id. Related: https://github.com/openwrt/packages/issues/8534 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* sdk: add cpupower to userspace sourcesJohn Audia2023-09-19
| | | | | | | For https://github.com/openwrt/packages/pull/21533 to be merged, this source tree is needed to be included. Signed-off-by: John Audia <therealgraysky@proton.me>
* mvebu: eDPU: add support for version with external switchRobert Marko2023-09-19
| | | | | | | | | | | New revision of eDPU uses an Marvell MV88E6361 switch to connect the SFP cage and G.hn IC instead of connecting them directly to the ethernet controllers. The same image can be used on both versions as U-Boot will enable the switch node and disable the unused ethernet controller. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* uboot-mvebu: eDPU: add support for version with external switchRobert Marko2023-09-19
| | | | | | | | | | | | | New revision of eDPU uses an Marvell MV88E6361 switch to connect the SFP cage and G.hn IC instead of connecting them directly to the ethernet controllers. In order to use the same image for both boards, U-Boot is responsible for detecting the revision and enabling/disabling DTS nodes. So, to make it easy for users, lets add the pending U-Boot patches to build in OpenWrt. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* generic: 6.1: backport support for Marvell 88E6361 switchRobert Marko2023-09-19
| | | | | | | New revision of Methode eDPU boards uses Marvell 88E6361 switch, so lets backport it from kernel 6.5. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* generic: 5.15: backport support for Marvell 88E6361 switchRobert Marko2023-09-19
| | | | | | | | | | | | New revision of Methode eDPU boards uses Marvell 88E6361 switch, so lets backport it from kernel 6.5. Since 5.15 doesnt have phylink_get_caps I had to modify the backport to use the old mv88e6393x_phylink_validate instead. I had to fixup one more instance of port_max_speed_mode as well that is not present in 6.5. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* netifd: update to the latest versionFelix Fietkau2023-09-19
| | | | | | 7a58b995fdbe wireless: update prev_config on SET_DATA notify Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: use phy name for hostapd interfaces instead of first-bss ifnameFelix Fietkau2023-09-19
| | | | | | Improves reliability in error handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: ZTE MF287 series: move to gpio-export for modem-reset GPIOAndreas Böhler2023-09-19
| | | | | | | | | Turn the "gpio-restart" node into a "gpio-export" node for all MF287 variants, similar to the MF287 Pro. Unfortunately, there doesn't seem to be a "power button blocker" GPIO for the MF287 and MF287 Plus, so a modem reset always triggers a system reset. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ipq40xx: refactor ZTE MF287 seriesAndreas Böhler2023-09-19
| | | | | | | | The ZTE MF287 requires a different board calibration file for ath10k than the ZTE MF287+. The two devices receive their own DTS, thus the device tree is slightly refactored. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* x86: add 6.1 testing kernelPascal Coudurier2023-09-19
| | | | | | | | | Enable building with 6.1 as testing kernel Compile-tested: x86_64, x86_generic, x86_legacy, x86_geode Run-tested: x86_64, x86_generic (qemu), x86_legacy (qemu) Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* kernel: modules: video: adapt drm-amdgpu and drm-radeon for kernel 6.1Pascal Coudurier2023-09-19
| | | | | | | | | | Package and add dependencies to drm-amdgpu and drm-radeon for 6.1 * package acpi-video, drm-display-helper and drm-buddy * add acpi-video, drm-display-helper and drm-buddy as dependencies for drm-amdgpu * add acpi-video and drm-display-helper as dependencies for drm-radeon Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* kernel: modules: netdevices: adapt mlx5-core for kernel 6.1Pascal Coudurier2023-09-19
| | | | | | Set CONFIG_MLX5_VFIO_PCI=n for kernel greater than 5.18 Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* kernel: modules: hwmon: adapt nct6775 for kernel 6.1Pascal Coudurier2023-09-19
| | | | | | | | nct6775 module splited in 5.19 kernel: * add nct6775-core module @ge5.19 * add regmap dependency for 6.1 Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* x86: refresh kernel configs for 6.1Pascal Coudurier2023-09-19
| | | | | | refresh and add missing symbols for target and subtargets Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* x86: copy 5.15 configs to 6.1Pascal Coudurier2023-09-19
| | | | | | Copy 5.15 configs to 6.1 as a starting point Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* x86: refresh patches for 6.1Pascal Coudurier2023-09-19
| | | | | | | | | | Removed upstream merged patch: 113-v5.21-platform-x86-pmc_atom-Add-Lex-3I380NX-industrial-PC-.patch Manually rebased: 103-pcengines_apu6_platform.patch Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* x86: copy 5.15 patches to 6.1Pascal Coudurier2023-09-19
| | | | | | Copy existing patches from 5.15 to 6.1 Signed-off-by: Pascal Coudurier <coudu@gmx.com>
* sunxi: add support for Bananapi P2 ZeroZoltan HERPAI2023-09-18
| | | | | | | | | | | | | | | CPU: Allwinner H2+ quad-core Cortex-A7 @ 1.2GHz Memory: 512Mb DDR3 Storage: SDcard, 8GB eMMC Network: 10/100M ethernet, optional PoE support, Ampak AP6212 wifi + BT USB: 1x USB 2.0 OTG Other: 40-pin expansion header, mini-HDMI Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert into SD card slot on the device and boot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* hostapd: fix dynamically adding interfaces with 802.11ax support disabled in ↵Felix Fietkau2023-09-18
| | | | | | | | the build Move an important code line outside of #ifdef CONFIG_IEEE80211AX Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: refresh kernel patchesChristian Marangi2023-09-18
| | | | | | Refresh kernel patches for sunxi target. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mt76: update to the latest versionFelix Fietkau2023-09-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | b5d13611d35e mt76: mt7915: fix monitor mode issues bbbac7deee3d wifi: mt76: rename mt76_packet_id_init/flush to mt76_wcid_init/cleanup f1e1e67d97d1 wifi: mt76: fix race condition related to checking tx queue fill status b3f739a64e6b wifi: mt76: mt7996: add eht rx rate support ca4917062f17 wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power 325a0c493199 wifi: mt76: mt7996: fill txd by host driver cd371fcc98d4 mt76: mt7996: sync with upstream d71f8d1b172b wifi: mt76: use atomic iface iteration for pre-TBTT work 8d5ea32d4895 wifi: mt76: remove unused error path in mt76_connac_tx_complete_skb 01860c02c505 wifi: mt76: add DMA mapping error check in mt76_alloc_txwi() 62ddb6d46a97 wifi: mt76: connac: introduce helper for mt7925 chipset 0837f37e998b wifi: mt76: mt792x: support mt7925 chip init 899ff378082b wifi: mt76: connac: export functions for mt7925 c3858b5bf347 wifi: mt76: connac: add eht support for phy mode config 5df6b26a9fc5 wifi: mt76: connac: add eht support for tx power a8081345c636 wifi: mt76: connac: add data field in struct tlv 9b38aebecf78 wifi: mt76: connac: add more unified command IDs 84984e6dc87d wifi: mt76: connac: add more unified event IDs 6fe92398c9ce wifi: mt76: mt7996: set correct wcid in txp 2cfe2fb0bb80 wifi: mt76: mt7996: fix beamform mcu cmd configuration e512241bb5bb wifi: mt76: mt7996: fix beamformee ss subfield in EHT PHY cap 719a98f832c7 wifi: mt76: mt7996: fix wmm queue mapping 9723562f2a5b wifi: mt76: mt7996: fix rx rate report for CBW320-2 1bb5a6a54943 wifi: mt76: mt7996: fix TWT command format 751b054891f6 wifi: mt76: mt7996: only set vif teardown cmds at remove interface fea1e10c7741 wifi: mt76: mt7996: support more options for mt7996_set_bitrate_mask() d497ee8aa2f5 wifi: mt76: mt7996: support per-band LED control 8ccc84111141 wifi: mt76: Use PTR_ERR_OR_ZERO() to simplify code 161f70217edf wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023) 7d25bfc3f0cc wifi: mt76: fix clang-specific fortify warnings 5971aa968401 wifi: mt76: connac: add MBSSID support for mt7996 5a47dd323be1 wifi: mt76: update beacon size limitation d5b4b81dcc9e wifi: mt76: check sta rx control frame to multibss capability af0e1f6dafb5 wifi: mt76: fix potential memory leak of beacon commands 65d91a833b01 wifi: mt76: get rid of false alamrs of tx emission issues 29411e52059f wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparison 4da62774038a wifi: mt76: check vif type before reporting cca and csa 4a85678fe089 wifi: mt76: mt7915: update mpdu density capability 791a45cffadf wifi: mt76: mt7915: fix beamforming availability check 08e1e6cb7d41 wifi: mt76: Drop unnecessary error check for debugfs_create_dir() d1881b1b2bf6 wifi: mt76: move struct ieee80211_chanctx_conf up to struct mt76_vif 66d5694e1898 wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driver 9fc37b0ac546 wifi: mt76: mt7921: fix the wrong rate selected in fw for the chanctx driver 2afc7285f75d wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream patch required for mt76 updateFelix Fietkau2023-09-18
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: add support for YYeTs LE1Chukun Pan2023-09-18
| | | | | | | | | | | | | | | | | | | Hardware Highlights: SoC: Qualcomm IPQ4019 717 MHz RAM: 512M NT5CC256M16ER-EK Flash: 32M SPI NOR MX25L25635F WIFI1: 2.4 GHz 2T2R integrated WIFI2: 5 GHz 2T2R integrated Ethernet: QCA8075 (4x LAN, 1x WAN) LEDS: power, wlan2g, wlan5g, usb USB: 1x 3.0 Button: Reset Installation: Upload factory.bin in stock firmware's upgrade page, and this will take a few minutes. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ipq-wifi: update to version 2023-09-16Chukun Pan2023-09-18
| | | | | | | | | | | | | Contains following updates: * ipq8074: add Asus RT-AX89X BDF * ipq8074: update RegDB in new submitted BDF * ipq40xx: add YYeTs LE1 BDF * ipq8074: add Netgear WAX620 * qca-wireless: ipq40xx: add BDFs for ZTE MF287 * ipq8174: Add Linksys MX4200 Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ipq40xx: fix image building for ZTE MF287 seriesAndreas Böhler2023-09-18
| | | | | | | | For the ZTE MF287 series, a special recovery image is built. The Makefile worked fine on snapshot, but created corrupt images on the 23.05 images. By using the appropriate variable, this should be fixed. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* sunxi: add support for H616 SoC and Orangepi Zero 2Zoltan HERPAI2023-09-18
| | | | | | | | | | | | | | | | | | | Specifications: SoC: Allwinner H616 @ 1.5 Ghz DRAM: 1Gb LPDDR3 Power: 5V USB-C Video: HDMI (Type 2.0A - micro) Network: 10/100/1000Mbps Ethernet (Realtek RTL8211F), AW859A BT+wifi Storage: microSD / 2Mb SPI flash USB: 1 USB2.0 Host Debug Serial UART Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert into SD card slot on the device and boot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ramips: RT1800: fix invalid octal number errorMax Qian2023-09-17
| | | | | | | | | | This commit removes the padded zeros in the date formatting. The padded zeros from the date command causes the numbers to be interpreted as an octal number by printf. Months, days, and years with the number 08 or 09 raise an error in printf as an "invalid octal number" and get interpreted as a zero. Signed-off-by: Max Qian <public@maxqia.com>
* ipq40xx: 6.1: add missing secure QFPROM symbolRobert Marko2023-09-17
| | | | | | | | | | | | | Kernel config for 6.1 on ipq40xx is missing the config for CONFIG_NVMEM_QCOM_SEC_QFPROM which them makes the build stop with a prompt. Symbol is there in 5.15 config but 6.1 config was based of a version that does not yet have it set as it was introduced after the 6.1 PR. So, disable CONFIG_NVMEM_QCOM_SEC_QFPROM to fix building on 6.1. Fixes: 825cfa4e36cb ("ipq40xx: 6.1: refresh kernel config") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: add 6.1 as testing kernelRobert Marko2023-09-17
| | | | | | Allow selecting 6.1 as the testing kernel. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: 6.1: refresh kernel configRobert Marko2023-09-17
| | | | | | Refresh the kernel config via make kernel_menuconfig. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: 6.1: use latest DSA and ethernet patchesRobert Marko2023-09-17
| | | | | | | | | | | | | | This pulls-in the latest version of qca8k based IPQ4019 driver as well as the latest version of IPQESS that was sent upstream. Both qca8k and IPQESS have been improved and cleaned up compared to current version of patches. PSGMII PHY mode and missing reset have been upstreamed and will be in the kernel 6.6. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: 6.1: adapt and refresh patchesRobert Marko2023-09-17
| | | | | | | | | Adapt and refresh patches to apply. DSA and ethernet driver patches are dropped as they will be replaced with the latest version that was sent upstream. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: qca807x: adapt for 6.1Robert Marko2023-09-17
| | | | | | | Kernel 6.1 has changed format of sfp_parse_support(), so lets adapt to those changes so it works on newer kernels as well. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: copy 5.15 patches and config to 6.1Robert Marko2023-09-17
| | | | | | Copy the 5.15 patches and config as a base for 6.1 support. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: update ESS reset patch with pending upstreamRobert Marko2023-09-17
| | | | | | Use the split version of ESS reset patch that was sent upstream. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: move DSA and ethernet driver to 5.15 specific directoryRobert Marko2023-09-17
| | | | | | | | As a preparation to move to 6.1, we need to move the DSA and ethernet drivers to a 5.15 specific directory as 6.1 will use the latest patchset that was sent upstream which is too hard to backport to 5.15. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath79: fix packetloss on some WLR-7100Matthijs Kooijman2023-09-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On some WLR-7100 routers, significant packet loss was observed. This is fixed by configuring a delay on the GMAC0 RXD and RXDV lines. The values used in this commit are copied from the values used by the stock firmare (based on register dumping). Out of four test routers, the problem was consistently observed on two. It is unclear what the relevant difference is exactly (the two working routers were v1 001 with AR1022 and v1 002 with AR9342, the two broken routers were both v1 002 with AR1022). All PCB routing also seems identical, so maybe there is some stray capacitance on some of these that adds just enough delay or so... With this change, the packet loss disappears on the broken routers, without introducing new packet loss on the previously working routers. Note that the PHY *also* has delays enabled (through `qca,ar8327-initvals`) on both RX and TX lines, but apparently that is not enough, or it is not effective (registers have been verified to be written). For detailed discussion of this issue and debug history, see https://forum.openwrt.org/t/sitecom-wlr-7100-development-progress/79641 Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
* mac80211: ath11k: sync with ath-nextRobert Marko2023-09-17
| | | | | | | | Synchronize the ath11k backports with the current ath-next tree. All of the changes are various bugfixes, there is no new major feature. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: ath11k: drop upstreamed patchesRobert Marko2023-09-17
| | | | | | | | | | | | | | | | Commit ed3725e15a154ebebf44e0c34806c57525483f92 ("wifi: ath11k: Fix qmi_msg_handler data structure initialization") has been present upstream since 6.1.2 but it seems Quilt refreshed it wrongly so it appeared like a completely different patch. Commit 7c15430822e71e90203d87e6d0cfe83fa058b0dc ("wifi: ath11k: allow system suspend to survive ath11k") has been present upstream since 6.1.16 but somehow quilt still happily applied it. So, drop both of them. Signed-off-by: Robert Marko <robimarko@gmail.com>
* sunxi: use kernel 6.1 as defaultZoltan HERPAI2023-09-16
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* procd: create /dev/fd symlinkErik Karlsson2023-09-16
| | | | | | | | This is needed for ksh/bash style process substitution such as <(command) and >(command) which was introduced in ash as of busybox version 1.34.0 to work. Signed-off-by: Erik Karlsson <erik.karlsson@genexis.eu>
* ath79: add support for MikroTik RouterBOARD 750 r2 (hEX lite)Roger Pueyo Centelles2023-09-16
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD 750 r2, marketed as hEX lite, a small indoor router with 5x 10/100 Mbps Ethernet ports, one with PoE in. The device was already supported by the ar71xx target. Specifications: - SoC: Qualcomm Atheros QCA9533 - Flash: 16 MB SPI NOR - RAM: 64 MB - Ethernet: 4x 10/100 Mbps LAN, 1x 10/100 Mbps WAN (PoE in) - LEDs: 5x Ethernet port activity (green), 1x user (green) - Buttons: 1x reset See https://mikrotik.com/product/RB750r2 for more details. Not working: - Serial port (already not working in ar71xx) Flashing: TFTP boot initramfs image and then perform sysupgrade. Only the "Internet" port will ask for an initramfs image. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* scripts/download.pl: Remove stale download sites and convert to httpsHannu Nyman2023-09-16
| | | | | | | | | | | Remove the stale site definitions from @APACHE, KERNEL etc. * Remove site that had dropped APACHE * Remove KERNEL site leading to wrong directory * Remove dead sites * Convert ftp/http URLs to https, if possible. Remove duplicate Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ipq40xx: add support for Netgear RBX40Thomas Makin2023-09-16
| | | | | | | | This adds support for the RBR40 and RBS40 (sold together as RBK40), two netgear routers identical to SRR60/SRS60 in all but antennae (and hardware id). See 2cb24b3f3c for details. Signed-off-by: Thomas Makin <halorocker89@gmail.com>
* netifd: update to the latest versionFelix Fietkau2023-09-15
| | | | | | | 88a3a9e2be07 wireless: clean up prev_config handling afcd3825dad9 wireless: dynamically enable/disable virtual interfaces base on network interface autostart Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing ubus ACL entries for AP+client (#13449)Felix Fietkau2023-09-15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: support dynamic reload of vlan files when renaming interfacesFelix Fietkau2023-09-15
| | | | | | | Avoids unnecessary AP restart on ifname changes when wifi-vlan sections are present. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2023-09-15
| | | | | | 3d425f16d6a6 wireless: rework and fix vlan/station config reload handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
Powered by cgit, Themed by Ted Yin.