filogic: add support for GL.iNet GL-MT6000

Hardware specification:
* SoC: MediaTek MT7986A 4x A53
* Flash: 8GB EMMC
* RAM: 1GB DDR4
* Ethernet:
  * 2x2.5G RJ45 port (RTL8221B)
  * 4x1G RJ45 ports (MT7531AE)
* WLAN:
  * 2.4GHz: MT7976GN 4T4R
  * 5GHz: MT7976AN 4T4R
* Button: Reset
* LED: 1 x dual color LED
* USB: 1 x USB 3.0
* Power: DC 12V 4A
* UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC)
* JTAG: 9 PIN

If you want to use u-boot from OpenWrt, you can upgrade it safely.
* bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
* fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip

`openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot.

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>

2 files changed, 287 insertions, 0 deletions

diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile
index 62199871e6..1a97570031 100644
--- a/package/boot/uboot-mediatek/Makefile
+++ b/package/boot/uboot-mediatek/Makefile
@@ -357,6 +357,18 @@ define U-Boot/mt7986_bananapi_bpi-r3-nor
   FIP_COMPRESS:=1
 endef
 
+define U-Boot/mt7986_glinet_gl-mt6000
+  NAME:=GL.iNet GL-MT6000
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=glinet_gl-mt6000
+  UBOOT_CONFIG:=mt7986a_glinet_gl-mt6000
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
+endef
+
 define U-Boot/mt7986_tplink_tl-xdr4288
   NAME:=TP-LINK TL-XDR4288
   BUILD_SUBTARGET:=filogic
@@ -496,6 +508,7 @@ UBOOT_TARGETS := \
 	mt7986_bananapi_bpi-r3-sdmmc \
 	mt7986_bananapi_bpi-r3-snand \
 	mt7986_bananapi_bpi-r3-nor \
+	mt7986_glinet_gl-mt6000 \
 	mt7986_tplink_tl-xdr4288 \
 	mt7986_tplink_tl-xdr6086 \
 	mt7986_tplink_tl-xdr6088 \
diff --git a/package/boot/uboot-mediatek/patches/436-add-glinet-mt6000.patch b/package/boot/uboot-mediatek/patches/436-add-glinet-mt6000.patch
new file mode 100644
index 0000000000..ad138acfd9
--- /dev/null
+++ b/package/boot/uboot-mediatek/patches/436-add-glinet-mt6000.patch
@@ -0,0 +1,274 @@
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-glinet-gl-mt6000.dts
+@@ -0,0 +1,135 @@
++// SPDX-License-Identifier: GPL-2.0
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include <dt-bindings/gpio/gpio.h>
++
++#include "mt7986.dtsi"
++
++/ {
++	model = "GL.iNet GL-MT6000";
++	compatible = "glinet,gl-mt6000", "mediatek,mt7986-emmc-rfb", "mediatek,mt7986";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x40000000>;
++	};
++
++    reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		wps {
++			label = "reset";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_blue: green {
++			label = "blue:status";
++			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_white: blue {
++			label = "white:status";
++			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_51";
++		};
++
++		conf-cmd-dat {
++			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++
++		conf-clk {
++			pins = "EMMC_CK";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-dsl {
++			pins = "EMMC_DSL";
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-rst {
++			pins = "EMMC_RSTB";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	cap-mmc-highspeed;
++	cap-mmc-hw-reset;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_1p8v>;
++	non-removable;
++	status = "okay";
++};
++
++&wmcpu_emi {
++	status = "disabled";
++};
+--- /dev/null
++++ b/configs/mt7986a_glinet_gl-mt6000_defconfig
+@@ -0,0 +1,105 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x80000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet-gl-mt6000"
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-glinet-gl-mt6000.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="glinet_gl-mt6000_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/glinet_gl-mt6000_env
+@@ -0,0 +1,25 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++bootdelay=3
++bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip
++bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_title=      *** U-Boot Boot Menu for GL-iNet GL-MT6000 ***
++bootmenu_0=Startup system (Default).=run boot_system
++bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return
++bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_3=mLoad BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_4=Reboot.=reset
++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset
++filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
++mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
++boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
++boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt
++emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 &&  && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0
++emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt
++reset_factory=eraseenv && reset